Parameter extraction of proton exchange membrane fuel cell based on artificial rabbits' optimization algorithm and conducting laboratory tests.

Proton exchange membrane fuel cell (PEMFC) parameter extraction is an important issue in modeling and control of renewable energies. The PEMFC problem's main objective is to estimate the optimal value of unknown parameters of the electrochemical model. The main objective function of the optimization problem is the sum of the square errors between the measured voltages and output voltages of the proposed electrochemical optimized model at various loading conditions. Natural rabbit survival strategies such as detour foraging and random hiding are influenced by Artificial rabbit optimization (ARO). Meanwhile, rabbit energy shrink is mimicked to control the smooth switching from detour foraging to random hiding. In this work, the ARO algorithm is proposed to find the parameters of PEMFC. The ARO performance is verified using experimental results obtained from conducting laboratory tests on the fuel cell test system (SCRIBNER 850e, LLC). The simulation results are assessed with four competitive algorithms: Grey Wolf Optimization Algorithm, Particle Swarm Optimizer, Salp Swarm Algorithm, and Sine Cosine Algorithm. The comparison aims to prove the superior performance of the proposed ARO compared with the other well-known competitive algorithms.

Advanced extraction of PV parameters' models based on electric field impacts on semiconductor conductivity using QIO algorithm.

This article presents a novel approach for parameters estimation of photovoltaic cells/modules using a recent optimization algorithm called quadratic interpolation optimization algorithm (QIOA). The proposed formula is dependent on variable voltage resistances (VVR) implementation of the series and shunt resistances. The variable resistances reduced from the effect of the electric field on the semiconductor conductivity should be included to get more accurate representation. Minimizing the mean root square error (MRSE) between the measured (I-V) dataset and the extracted (V-I) curve from the proposed electrical model is the main goal of the current optimization problem. The unknown parameters of the proposed PV models under the considered operating conditions are identified and optimally extracted using the proposed QIOA. Two distinct PV types are employed with normal and low radiation conditions. The VVR TDM is proposed for (R.T.C. France) silicon PV operating at normal radiation, and eleven unknown parameters are optimized. Additionally, twelve unknown parameters are optimized for a Q6-1380 multi-crystalline silicon (MCS) (area 7.7 cm2) operating under low radiation. The efficacy of the QIOA is demonstrated through comparison with four established optimizers: Grey Wolf Optimization (GWO), Particle Swarm Optimization (PSO), Salp Swarm Algorithm (SSA), and Sine Cosine Algorithm (SCA). The proposed QIO method achieves the lowest absolute current error values in both cases, highlighting its superiority and efficiency in extracting optimal parameters for both Single-Crystalline Silicon (SCS) and MCS cells under varying irradiance levels. Furthermore, simulation results emphasize the effectiveness of QIO compared to other algorithms in terms of convergence speed and robustness, making it a promising tool for accurate and efficient PV parameter estimation.

Reliability constrained dynamic generation expansion planning using honey badger algorithm.

Generation expansion planning (GEP) is a complex, highly constrained, non-linear, discrete and dynamic optimization task aimed at determining the optimum generation technology mix of the best expansion alternative for long-term planning horizon. This paper presents a new framework to study the GEP in a multi-stage horizon with reliability constrained. GEP problem is presented to minimize the capital investment costs, salvage value cost, operation and maintenance, and outage cost under several constraints over planning horizon. Added to that, the spinning reserve, fuel mix ratio and reliability in terms of Loss of Load Probability are maintained. Moreover, to decrease the GEP problem search space and reduce the computational time, some modifications are proposed such as the Virtual mapping procedure, penalty factor approach, and the modified of intelligent initial population generation. For solving the proposed reliability constrained GEP problem, a novel honey badger algorithm (HBA) is developed. It is a meta-heuristic search algorithm inspired from the intelligent foraging behavior of honey badger to reach its prey. In HBA, the dynamic search behavior of honey badger with digging and honey finding approaches is formulated into exploration and exploitation phases. Added to that, several modern meta-heuristic optimization algorithms are employed which are crow search algorithm, aquila optimizer, bald eagle search and particle swarm optimization. These algorithms are applied, in a comparative manner, for three test case studies for 6-year, 12-year, and 24-year of short- and long-term planning horizon having five types of candidate units. The obtained results by all these proposed algorithms are compared and validated the effectiveness and superiority of the HBA over the other applied algorithms.

High gain chopper supplied from PV system to fed synchronous reluctance motor drive for pumping water application.

Power generation for renewable energy sources increased rapidly during last few years. Similarly, the high gain dc-dc boost choppers are taking place of conventional power converters used for photovoltaic (PV) appliances. Researchers are developing different methods in order to provide high voltage gain, low ripple, reduced switch stress, low converter costs, and minimized variations of PV operating points. This study proposes a two-stage converter for a freestanding water pumping motor drive power by solar PV system. According to the proposed system, at first, a high gain (HG) cell and a DC-to-DC boost converter are combined to increase the PV voltage to high levels. Later on, the resulting dc voltage feds a three-phase synchronous reluctance motor drive that operates centrifugal pump load. The perturb and observe approach is utilized to get the maximum power out of the solar PV module. Moreover, indirect field-oriented control is implemented to accomplish smooth starting of synchronous reluctance motor. In order to validate the effectiveness of proposed technique, a MATLAB/Simulink environment-based simulation setup along with an experimental prototype is developed. Additionally, various cases are considered based on different operating conditions and irradiance levels to collect and analyse the results.