Sub-picoliter Traceability of Microdroplet Gravimetry and Microscopy.

Gravimetry typically lacks the resolution to measure single microdroplets, whereas microscopy is often inaccurate beyond the resolution limit. To address these issues, we advance and integrate these complementary methods, introducing simultaneous measurements of the same microdroplets, comprehensive calibrations that are independently traceable to the International System of Units (SI), and Monte-Carlo evaluations of volumetric uncertainty. We achieve sub-picoliter agreement of measurements of microdroplets in flight with volumes of approximately 70 pL, with ensemble gravimetry and optical microscopy both yielding 95% coverage intervals of ±0.6 pL, or relative uncertainties of ±0.9%, and root-mean-square deviations of mean values between the two methods of 0.2 pL or 0.3%. These uncertainties match previous gravimetry results and improve upon previous microscopy results by an order of magnitude. Gravimetry precision depends on the continuity of droplet formation, whereas microscopy accuracy requires that optical diffraction from an edge reference matches that from a microdroplet. Applying our microscopy method, we jet and image water microdroplets suspending fluorescent nanoplastics, count nanoplastic particles after deposition and evaporation, and transfer volumetric traceability to the number concentrations of single microdroplets. We expect that our methods will impact diverse fields involving dimensional metrology and volumetric analysis of microdroplets, including inkjet microfabrication, disease transmission, and industrial sprays.

Separation, Sizing, and Quantitation of Engineered Nanoparticles in an Organism Model Using Inductively Coupled Plasma Mass Spectrometry and Image Analysis.

For environmental studies assessing uptake of orally ingested engineered nanoparticles (ENPs), a key step in ensuring accurate quantification of ingested ENPs is efficient separation of the organism from ENPs that are either nonspecifically adsorbed to the organism and/or suspended in the dispersion following exposure. Here, we measure the uptake of 30 and 60 nm gold nanoparticles (AuNPs) by the nematode, Caenorhabditis elegans, using a sucrose density gradient centrifugation protocol to remove noningested AuNPs. Both conventional inductively coupled plasma mass spectrometry (ICP-MS) and single particle (sp)ICP-MS are utilized to measure the total mass and size distribution, respectively, of ingested AuNPs. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) imaging confirmed that traditional nematode washing procedures were ineffective at removing excess suspended and/or adsorbed AuNPs after exposure. Water rinsing procedures had AuNP removal efficiencies ranging from 57 to 97% and 22 to 83%, while the sucrose density gradient procedure had removal efficiencies of 100 and 93 to 98%, respectively, for the 30 and 60 nm AuNP exposure conditions. Quantification of total Au uptake was performed following acidic digestion of nonexposed and Au-exposed nematodes, whereas an alkaline digestion procedure was optimized for the liberation of ingested AuNPs for spICP-MS characterization. Size distributions and particle number concentrations were determined for AuNPs ingested by nematodes with corresponding confirmation of nematode uptake via high-pressure freezing/freeze substitution resin preparation and large-area SEM imaging. Methods for the separation and in vivo quantification of ENPs in multicellular organisms will facilitate robust studies of ENP uptake, biotransformation, and hazard assessment in the environment.

Quantification of Carbon Nanotubes in Environmental Matrices: Current Capabilities, Case Studies, and Future Prospects.

Carbon nanotubes (CNTs) have numerous exciting potential applications and some that have reached commercialization. As such, quantitative measurements of CNTs in key environmental matrices (water, soil, sediment, and biological tissues) are needed to address concerns about their potential environmental and human health risks and to inform application development. However, standard methods for CNT quantification are not yet available. We systematically and critically review each component of the current methods for CNT quantification including CNT extraction approaches, potential biases, limits of detection, and potential for standardization. This review reveals that many of the techniques with the lowest detection limits require uncommon equipment or expertise, and thus, they are not frequently accessible. Additionally, changes to the CNTs (e.g., agglomeration) after environmental release and matrix effects can cause biases for many of the techniques, and biasing factors vary among the techniques. Five case studies are provided to illustrate how to use this information to inform responses to real-world scenarios such as monitoring potential CNT discharge into a river or ecotoxicity testing by a testing laboratory. Overall, substantial progress has been made in improving CNT quantification during the past ten years, but additional work is needed for standardization, development of extraction techniques from complex matrices, and multimethod comparisons of standard samples to reveal the comparability of techniques.

Loading and distribution of a model small molecule drug in poly(N-isopropylacrylamide) brushes: a neutron reflectometry and AFM study.

The structure of a hydrated poly(N-isopropylacrylamide) brush loaded with 5 vol % Isoniazid is studied as a function of temperature using neutron reflectometry (NR) and atomic force microscopy (AFM). NR measurements show that Isoniazid increases the thickness of the brush before, during and after the polymer collapse, and it is retained inside the brush at all measured temperatures. The Isoniazid concentration in the expanded brush is ~14% higher than in the bulk solution, and the concentration nearly doubles in the collapsed polymer, suggesting stronger binding between Isoniazid and the polymer compared to water, even at temperatures below the lower critical solution temperature (LCST) where the polymer is hydrophilic. Typically, additives that bind strongly to the polymer backbone and increase the hydrophilicity of the polymer will delay the onset of the LCST, which is suggested by AFM and NR measurements. The extent of small-molecule loading and distribution throughout a thermo-responsive polymer brush, such as pNIPAAm, will have important consequences for applications such as drug delivery and gating.

Single molecule tracking studies of lower critical solution temperature transition behavior in poly(N-isopropylacrylamide).

Spatial and temporal heterogeneities in expanded and collapsed surface bound poly(N-isopropylacrylamide), pNIPAAm, films are studied by single molecule tracking (SMT) experiments. Tracking data are analyzed using both radius of gyration (R(g)) evolution and confinement level calculations to elucidate the range of behaviors displayed by single Rhodamine6G (R6G) molecules. Confined diffusion that is dictated by the free volume within surface tethered chains is observed with considerable dispersion among individual R6G molecules. Thus, the distribution of probe behavior reflects nanometer-scale information about the behavior of the probe-polymer system at temperatures above (T > T(LCST)) and below (T < T(LCST)) the lower critical solution temperature (LCST). In this context, confinement-level analysis and R(g) evolution both show a larger degree of confinement of the probe in pNIPAAm at T > T(LCST). Temperature-dependent changes in confinement are evidenced at T > T(LCST) by a higher percentage of confined steps, longer periods of confined events, and smaller area of confined zones, as well as a shift in the overall distribution of R(g) evolution paths and final R(g) distributions.

Trajectory analysis of single molecules exhibiting non-brownian motion.

Four techniques for analyzing single molecule tracking data--confinement level analysis, time series analysis and statistical analysis of lateral diffusion, multistate kinetics, and a newly developed method, radius of gyration evolution analysis--are compared using a set of sample fluorophore trajectories obtained from the lipophilic carbocyanine dye 1,1'-dioctadecyl-3,3,3'3'-tetramethylindocarbocyanine, DiIC(18), partitioned into surface tethered poly(n-isopropylacrylamide). The purpose here is two-fold: first to test that these techniques can be applied to single molecules trajectories, which typically contain a smaller total number of frames than those obtained from other particles, e.g. quantum dots or gold nanoparticles; and second to critically compare the information obtained from each method against the others. A set of five SMT trajectories, ranging in length from 41 to 273 steps with a 30 ms frame transfer exposure, were all successfully analyzed by all four techniques, provided two important criteria were met: enough steps to define the motion were acquired in the trajectory, generally on the order of 50 steps, and the fast and slow diffusion coefficients differ by at least a factor of 5. Beyond that the four trajectory analysis methods studied provide partially confirmatory and partially complementary information. SMT data resulting from more complex physical behavior may well benefit from using these techniques in succession to identify and sort populations.

Microfluidic devices for energy conversion: planar integration and performance of a passive, fully immersed H2-O2 fuel cell.

We describe the fabrication and performance of a passive, microfluidics-based H2-O2 microfluidic fuel cell using thin film Pt electrodes embedded in a poly(dimethylsiloxane) (PDMS) device. The electrode array is fully immersed in a liquid electrolyte confined inside the microchannel network, which serves also as a thin gas-permeable membrane through which the reactants are fed to the electrodes. The cell operates at room temperature with a maximum power density of around 700 microW/cm(2), while its performance, as recorded by monitoring the corresponding polarization curves and the power density plots, is affected by the pH of the electrolyte, its concentration, the surface area of the Pt electrodes, and the thickness of the PDMS membrane. The best results were obtained in basic solutions using electrochemically roughened Pt electrodes, the roughness factor, R(f), of which was around 90 relative to a smooth Pt film. In addition, the operating lifetime of the fuel cell was found to be longer for the one using higher surface area electrodes.