Enhanced chlorhexidine skin penetration with 1,8-cineole.

BACKGROUND: Chlorhexidine (CHG) penetrates poorly into skin. The purpose of this study was to compare the depth of CHG skin permeation from solutions containing either 2% (w/v) CHG and 70% (v/v) isopropyl alcohol (IPA) or 2% (w/v) CHG, 70% (v/v) IPA and 2% (v/v) 1,8-cineole. METHODS: An ex-vivo study using Franz diffusion cells was carried out. Full thickness human skin was mounted onto the cells and a CHG solution, with or without 2% (v/v) 1,8-cineole was applied to the skin surface. After twenty-four hours the skin was sectioned horizontally in 100 µm slices to a depth of 2000 µm and the concentration of CHG in each section quantified using high performance liquid chromatography (HPLC). The data were analysed with repeated measures analysis of variance. RESULTS: The concentration of CHG in the skin on average was significantly higher (33.3% [95%, CI 1.5% - 74.9%]) when a CHG solution which contained 1,8-cineole was applied to the skin compared to a CHG solution which did not contain this terpene (P = 0.042). CONCLUSIONS: Enhanced delivery of CHG can be achieved in the presence of 1,8-cineole, which is the major component of eucalyptus oil. This may reduce the numbers of microorganisms located in the deeper layers of the skin which potentially could decrease the risk of surgical site infection.

Microbiologic contamination of a positive- and a neutral- displacement needleless intravenous access device in clinical use.

The use of a positive-displacement needleless intravenous access device was associated with lower microbial contamination rates compared with a neutral-displacement device when used on central venous catheters in hemato-oncology patients. In addition, rates of central line-associated bloodstream infection did not differ when either device was used.

Antimicrobial activity and skin permeation of iodine present in an iodine-impregnated surgical incise drape.

OBJECTIVES: The antimicrobial efficacy of an iodine-impregnated incise drape against MRSA was evaluated in a skin model. The permeation of iodine from this drape into the skin was also assessed. METHODS: The antimicrobial efficacy was evaluated in ex vivo studies following application of the surgical incise drape for various times on the surface of donor skin, which was inoculated with either 1 × 10(3) or 1 × 10(6) cfu MRSA/cm(2) skin and mounted on Franz diffusion cells. In some experiments the MRSA-inoculated skin was pre-incubated for 18 h at room temperature prior to applying the drape. Permeation of iodine into the skin using this model was also determined following application of the incise drape for 6 h. RESULTS: The iodine-impregnated drape demonstrated antimicrobial activity compared with the non-use of drape. This reached significance when a high inoculum of MRSA was applied with no pre-incubation period and when a low inoculum of MRSA was applied with a pre-incubation period (P = 0.002 and P = 0.014, respectively). Furthermore, in experiments wherein a high inoculum of MRSA was applied with no pre-incubation period, the iodine-impregnated drape demonstrated superior antimicrobial activity compared with the use of a non-antimicrobial drape (P < 0.001). MIC and MBC values of iodine were attained to 1500 µm below the skin surface. CONCLUSIONS: The iodine-impregnated surgical incise drape had detectable antimicrobial activity. Furthermore, iodine penetrated into the deeper layers of the skin. This property should suppress microbial regrowth at and around a surgical incision site, making its use preferable to the use of a standard drape or non-use of a drape.

Microbiological comparison of a silver-coated and a non-coated needleless intravascular connector in clinical use.

BACKGROUND: The potential for microbial contamination of needleless intravascular (IV) connectors and the risk of subsequent infection are currently a subject of debate. AIM: To compare the number of micro-organisms associated with silver-coated and non-coated connectors in a clinical setting. METHODS: Twenty-five patients with haematological malignancies who required a central venous catheter (CVC) as part of their clinical management were studied. Each patient's CVC was randomly designated to have attached either silver-coated or non-coated connectors. Before and after each manipulation of the connectors, the compression seals were decontaminated with a wipe incorporating 2% (w/v) chlorhexidine gluconate in 70% (v/v) isopropyl alcohol. Following four days in situ, the number of micro-organisms recovered from 119 silver-coated and 117 non-coated connectors was determined. FINDINGS: Thirty-six (30.3%) silver-coated connectors had micro-organisms present on the external silicone compression seal compared to 41 (35%) non-coated connectors [odds ratio (OR): 0.8; 95% confidence interval (CI): 0.47-1.39; P = 0.49]. Conversely, the internal fluid pathway of 31 (26.1%) silver-coated connectors had micro-organisms present compared to 55 (47.0%) of the non-coated connectors (OR: 0.40; 95% CI: 0.23-0.69; P = 0.001). In addition, the total number of micro-organisms present was less in the silver-coated connectors as compared to non-coated devices (P = 0.001). CONCLUSION: The use of a silver-coated connector with a dedicated decontamination regime may reduce the risk of catheter-related bloodstream infection acquired via the intraluminal route.

The antimicrobial efficacy of copper alloy furnishing in the clinical environment: a crossover study.

OBJECTIVE: To determine whether copper incorporated into hospital ward furnishings and equipment can reduce their surface microbial load. DESIGN: A crossover study. SETTING: Acute care medical ward with 19 beds at a large university hospital. METHODS: Fourteen types of frequent-touch items made of copper alloy were installed in various locations on an acute care medical ward. These included door handles and push plates, toilet seats and flush handles, grab rails, light switches and pull cord toggles, sockets, overbed tables, dressing trolleys, commodes, taps, and sink fittings. Their surfaces and those of equivalent standard items on the same ward were sampled once weekly for 24 weeks. The copper and standard items were switched over after 12 weeks of sampling to reduce bias in usage patterns. The total aerobic microbial counts and the presence of indicator microorganisms were determined. RESULTS: Eight of the 14 copper item types had microbial counts on their surfaces that were significantly lower than counts on standard materials. The other 6 copper item types had reduced microbial numbers on their surfaces, compared with microbial counts on standard items, but the reduction did not reach statistical significance. Indicator microorganisms were recovered from both types of surfaces; however, significantly fewer copper surfaces were contaminated with vancomycin-resistant enterococci, methicillin-susceptible Staphylococcus aureus, and coliforms, compared with standard surfaces. CONCLUSIONS: Copper alloys (greater than or equal to 58% copper), when incorporated into various hospital furnishings and fittings, reduce the surface microorganisms. The use of copper in combination with optimal infection-prevention strategies may therefore further reduce the risk that patients will acquire infection in healthcare environments.

Role of copper in reducing hospital environment contamination.

The environment may act as a reservoir for pathogens that cause healthcare-associated infections (HCAIs). Approaches to reducing environmental microbial contamination in addition to cleaning are thus worthy of consideration. Copper is well recognised as having antimicrobial activity but this property has not been applied to the clinical setting. We explored its use in a novel cross-over study on an acute medical ward. A toilet seat, set of tap handles and a ward entrance door push plate each containing copper were sampled for the presence of micro-organisms and compared to equivalent standard, non-copper-containing items on the same ward. Items were sampled once weekly for 10 weeks at 07:00 and 17:00. After five weeks, the copper-containing and non-copper-containing items were interchanged. The total aerobic microbial counts per cm(2) including the presence of 'indicator micro-organisms' were determined. Median numbers of microorganisms harboured by the copper-containing items were between 90% and 100% lower than their control equivalents at both 07:00 and 17:00. This reached statistical significance for each item with one exception. Based on the median total aerobic cfu counts from the study period, five out of ten control sample points and zero out of ten copper points failed proposed benchmark values of a total aerobic count of <5cfu/cm(2). All indicator micro-organisms were only isolated from control items with the exception of one item during one week. The use of copper-containing materials for surfaces in the hospital environment may therefore be a valuable adjunct for the prevention of HCAIs and requires further evaluation.

Penetration of chlorhexidine into human skin.

This study evaluated a model of skin permeation to determine the depth of delivery of chlorhexidine into full-thickness excised human skin following topical application of 2% (wt/vol) aqueous chlorhexidine digluconate. Skin permeation studies were performed on full-thickness human skin using Franz diffusion cells with exposure to chlorhexidine for 2 min, 30 min, and 24 h. The concentration of chlorhexidine extracted from skin sections was determined to a depth of 1,500 microm following serial sectioning of the skin using a microtome and analysis by high-performance liquid chromatography. Poor penetration of chlorhexidine into skin following 2-min and 30-min exposures to chlorhexidine was observed (0.157 +/- 0.047 and 0.077 +/- 0.015 microg/mg tissue within the top 100 microm), and levels of chlorhexidine were minimal at deeper skin depths (less than 0.002 microg/mg tissue below 300 microm). After 24 h of exposure, there was more chlorhexidine within the upper 100-microm sections (7.88 +/- 1.37 microg/mg tissue); however, the levels remained low (less than 1 microg/mg tissue) at depths below 300 microm. There was no detectable penetration through the full-thickness skin. The model presented in this study can be used to assess the permeation of antiseptic agents through various layers of skin in vitro. Aqueous chlorhexidine demonstrated poor permeation into the deeper layers of the skin, which may restrict the efficacy of skin antisepsis with this agent. This study lays the foundation for further research in adopting alternative strategies for enhanced skin antisepsis in clinical practice.

Antimicrobial efficacy of copper surfaces against spores and vegetative cells of Clostridium difficile: the germination theory.

OBJECTIVES: Persistent contamination of surfaces by spores of Clostridium difficile is a major factor influencing the spread of C. difficile-associated diarrhoea (CDAD) in the clinical setting. In recent years, the antimicrobial efficacy of metal surfaces has been investigated against microorganisms including methicillin-resistant Staphylococcus aureus. This study compared the survival of C. difficile on stainless steel, a metal contact surface widely used in hospitals, and copper surfaces. METHODS: Antimicrobial efficacy was assessed using a carrier test method against dormant spores, germinating spores and vegetative cells of C. difficile (NCTC 11204 and ribotype 027) over a 3 h period in the presence and absence of organic matter. RESULTS: Copper metal eliminated all vegetative cells of C. difficile within 30 min, compared with stainless steel which demonstrated no antimicrobial activity (P < 0.05). Copper significantly reduced the viability of spores of C. difficile exposed to the germinant (sodium taurocholate) in aerobic conditions within 60 min (P < 0.05) while achieving a >or=2.5 log reduction (99.8% reduction) at 3 h. Organic material did not reduce the antimicrobial efficacy of the copper surface (P > 0.05). CONCLUSIONS: The use of copper surfaces within the clinical environment and application of a germination solution in infection control procedures may offer a novel way forward in eliminating C. difficile from contaminated surfaces and reducing CDAD.

Sporicidal activity of two disinfectants against Clostridium difficile spores.

The sporicidal activity of an odour-free peracetic acid-based disinfectant (Wofasteril) and a widely-used dichloroisocyanurate preparation (Chlor-clean) was assessed against spores of the hyper-virulent strain of Clostridium difficile (ribotype 027), in the presence and absence of organic matter. In environmentally clean conditions, dichloroisocyanurate achieved a >3 log10 reduction in 3 minutes, but a minimum contact time of 9 minutes was required to reduce the viable spore load to below detection levels. Peracetic acid achieved a >3 log10 reduction in 30 minutes and was overall significantly less effective (P<0.05). However, in the presence of organic matter - which reflects the true clinical environment - there was no significant difference between the sporicidal activity of dichloroisocyanurate and peracetic acid over a 60-minute period (P=0.188). Given the greater occupational health hazards generally associated with chlorine-releasing agents, odour-free peracetic acid-based disinfectants may offer a suitable alternative for environmental disinfection.

Physical and chemical factors influencing the germination of Clostridium difficile spores.

AIMS: To investigate the influence of chemical and physical factors on the rate and extent of germination of Clostridium difficile spores. METHODS AND RESULTS: Germination of C. difficile spores following exposure to chemical and physical germinants was measured by loss of either heat or ethanol resistance. Sodium taurocholate and chenodeoxycholate initiated germination together with thioglycollate medium at concentrations of 0.1-100 mmol l(-1) and 10-100 mmol l(-1) respectively. Glycine (0.2% w/v) was a co-factor required for germination with sodium taurocholate. There was no significant difference in the rate of germination of C. difficile spores in aerobic and anaerobic conditions (P > 0.05) however, the initial rate of germination was significantly increased at 37 degrees C compared to 20 degrees C (P < 0.05). The optimum pH range for germination was 6.5-7.5, with a decreased rate and extent of germination occurring at pH 5.5 and 8.5. CONCLUSIONS: This study demonstrates that sodium taurocholate and chenodeoxycholate initiate germination of C. difficile spores and is concentration dependant. Temperature and pH influence the rate and extent of germination. SIGNIFICANCE AND IMPACT OF THE STUDY: This manuscript enhances the knowledge of the factors influencing the germination of C. difficile spores. This may be applied to the development of potential novel strategies for the prevention of C. difficile infection.

Staphylococci.

Staphylococci are among the leading causes of nosocomial infections. Increasing insusceptibility to beta-lactams and the glycopeptides complicates treatment of these infections. This review examines the current status and future perspectives for the therapy of infections caused by Staphylococcus aureus and coagulase-negative staphylococci.

An update on antimicrobial central venous catheters.

Antimicrobial central venous catheters make use of a variety of antimicrobial mechanisms. Although they are currently infrequently used and their role in preventing infection is still being defined, they have a clear application in certain situations.

Pro-inflammatory cytokines IL6, TNF-alpha, IL1beta, procalcitonin, lipopolysaccharide binding protein and C-reactive protein in infective endocarditis.

OBJECTIVE: To evaluate the serum levels and diagnostic value of cytokines and acute phase proteins in patients with infective endocarditis (IE). PATIENTS AND METHODS: Serum samples from 63 patients diagnosed with IE and 71 control patients were analysed for the following markers: interleukin-6 (IL6), tumour necrosis factor-alpha (TNF-alpha), interleukin 1-beta (IL1beta), procalcitonin (PCT), lipopolysaccharide binding protein (LBP) and C-reactive protein (CRP). RESULTS: Serum levels of IL6, IL1beta and CRP were significantly elevated in patients with IE as compared to controls. PCT, TNF-alpha and LBP were not elevated. CONCLUSION: Serum CRP and IL6 are elevated in IE. IL 6 may aid in establishing the diagnosis. There was no correlation between IL 6 levels and CRP, causative microorganism, echocardiographic features or outcome.