Surgical treatment of nasal fractures may benefit from intraoperative 3D imaging.

This retrospective study aimed to assess the effects of the use of intraoperative three-dimensional (3D) imaging on outcomes in surgical treatment of nasal fractures. Furthermore, we investigated whether the use of intraoperative imaging improves outcomes and decreases the frequency of corrective surgeries compared to published literature. This retrospective descriptive study included patients who underwent operative treatment for nasal fractures with the use of intraoperative 3D imaging between January 2015 and January 2020 at a University Hospital. The primary outcome measure was patient satisfaction, which was assessed through patient charts about subjective esthetic problems and nasal obstruction. The secondary outcome measures were the number of intraoperative images and necessity of intra- and postoperative revisions. All the outcomes were evaluated using regression analysis. Of the 172 patients, secondary rhinoplasty and intraoperative revision were performed in 10 (6 %) and 93 (54 %) patients, respectively. Postoperatively, 19 (11 %) and 12 (7 %) patients complained of subjective esthetic problems and nasal obstruction, respectively. The intraoperative revision rate in patients undergoing surgical treatment of nasal fractures with intraoperative 3D imaging was >50 %. However, the incidence of postoperative secondary revision, nasal obstruction, and subjective esthetic problems was lower than that reported in the literature not having an intraoperative imaging. Our findings suggest that prompt quality control of the operative result enables immediate correction and prevents postoperative revision.

Patient-specific beta-tricalcium phosphate scaffold for customized alveolar ridge augmentation: a case report : Case Report: patient-specific ß-TCP scaffold for alveolar ridge CBR.

BACKGROUND: Beta-tricalcium phosphate (ß-TCP) is a biocompatible ceramic material widely used in the field of oral regeneration. Due to its excellent biological and mechanical properties, it is increasingly utilized for alveolar ridge augmentation or guided bone regeneration (GBR). With recent advances in computer-aided design and manufacturing (CAD/CAM), ß-TCP can now be used in the form of digitally designed patient-specific scaffolds for customized bone regeneration (CBR) of advanced defects in a two-stage implant therapy concept. In this case report following the CARE case report guidelines, we present a novel application of a patient-specific ß-TCP scaffold in pre-implant mandibular alveolar ridge augmentation. CASE PRESENTATION: A 63-year-old female patient with significant horizontal bone loss in the posterior mandible was treated with a custom ß-TCP scaffold in the context of a two-stage backward-planned implant therapy. Cone-beam computed tomography nine months after augmentation showed successful integration of the scaffold into the surrounding bone, allowing implant placement. Follow-up until two years after initial surgery showed excellent oral and peri-implant health. CONCLUSIONS: This case highlights the potential of patient-specific ß-TCP scaffolds for alveolar ridge augmentation and their advantage over traditional techniques, including avoidance of xeno-, allo-, and autografts. The results provide encouraging evidence for their use in clinical practice. Patient-specific ß-TCP scaffolds may be a promising alternative for clinicians seeking to provide their patients with safe, predictable, and effective alveolar ridge augmentation results in customized bone regeneration procedures.

The Effectiveness of Three-Dimensional Osteosynthesis Plates versus Conventional Plates for the Treatment of Skeletal Fractures: A Systematic Review and Meta-Analysis.

PURPOSE: To assess the difference between preformed anatomically shaped osteosynthesis plates and patient-specific implants versus conventional flat plates for the treatment of skeletal fractures in terms of anatomical reduction, operation time, approach, patient outcomes, and complications. MATERIAL AND METHODS: MEDLINE (1950 to February 2023), EMBASE (1966 to February 2023), and the Cochrane Central Register of Controlled Trials (inception to February 2023) databases were searched. Eligible studies were randomised clinical trials, prospective controlled clinical trials, and prospective and retrospective cohort studies (n ≥ 10). Inclusion criteria were studies reporting the outcomes of preformed anatomically shaped osteosynthesis plates and patient-specific implants versus conventional flat plates after treating skeletal fractures. Outcome measures included anatomical reduction, stability, operation time, hospitalisation days, patients' outcomes, and complications. Two independent reviewers assessed the abstracts and analysed the complete texts and methodologies of the included studies. RESULTS: In total, 21 out of the 5181 primarily selected articles matched the inclusion criteria. A meta-analysis revealed a significant difference in operation time in favour of the preformed anatomical plates and patient-specific implants versus conventional plates. Significant differences in operation time were found for the orbital (95% CI: -50.70-7.49, p = 0.008), upper limb (95% CI: -17.91-6.13, p < 0.0001), and lower limb extremity groups (95% CI: -20.40-15.11, p < 0.00001). The mean difference in the rate of anatomical reduction in the lower limb extremity group (95% CI: 1.04-7.62, p = 0.04) was also in favour of using preformed anatomical plates and patient-specific implants versus conventional plates. CONCLUSIONS: This systematic review showed a significant mean difference in surgery time favouring the use of preformed anatomical plates and patient-specific implants for orbital, upper, and lower limb extremity fractures. Additionally, preformed anatomical plates and patient-specific implants in the lower limb group result in a significantly higher rate of anatomical reduction versus conventional flat plates.

Personalized Medicine Workflow in Post-Traumatic Orbital Reconstruction.

Restoration of the orbit is the first and most predictable step in the surgical treatment of orbital fractures. Orbital reconstruction is keyhole surgery performed in a confined space. A technology-supported workflow called computer-assisted surgery (CAS) has become the standard for complex orbital traumatology in many hospitals. CAS technology has catalyzed the incorporation of personalized medicine in orbital reconstruction. The complete workflow consists of diagnostics, planning, surgery and evaluation. Advanced diagnostics and virtual surgical planning are techniques utilized in the preoperative phase to optimally prepare for surgery and adapt the treatment to the patient. Further personalization of the treatment is possible if reconstruction is performed with a patient-specific implant and several design options are available to tailor the implant to individual needs. Intraoperatively, visual appraisal is used to assess the obtained implant position. Surgical navigation, intraoperative imaging, and specific PSI design options are able to enhance feedback in the CAS workflow. Evaluation of the surgical result can be performed both qualitatively and quantitatively. Throughout the entire workflow, the concepts of CAS and personalized medicine are intertwined. A combination of the techniques may be applied in order to achieve the most optimal clinical outcome. The goal of this article is to provide a complete overview of the workflow for post-traumatic orbital reconstruction, with an in-depth description of the available personalization and CAS options.

Visualization of Inferior Alveolar and Lingual Nerve Pathology by 3D Double-Echo Steady-State MRI: Two Case Reports with Literature Review.

Injury to the peripheral branches of the trigeminal nerve, particularly the lingual nerve (LN) and the inferior alveolar nerve (IAN), is a rare but serious complication that can occur during oral and maxillofacial surgery. Mandibular third molar surgery, one of the most common surgical procedures in dentistry, is most often associated with such a nerve injury. Proper preoperative radiologic assessment is hence key to avoiding neurosensory dysfunction. In addition to the well-established conventional X-ray-based imaging modalities, such as panoramic radiography and cone-beam computed tomography, radiation-free magnetic resonance imaging (MRI) with the recently introduced black-bone MRI sequences offers the possibility to simultaneously visualize osseous structures and neural tissue in the oral cavity with high spatial resolution and excellent soft-tissue contrast. Fortunately, most LN and IAN injuries recover spontaneously within six months. However, permanent damage may cause significant loss of quality of life for affected patients. Therefore, therapy should be initiated early in indicated cases, despite the inconsistency in the literature regarding the therapeutic time window. In this report, we present the visualization of two cases of nerve pathology using 3D double-echo steady-state MRI and evaluate evidence-based decision-making for iatrogenic nerve injury regarding a wait-and-see strategy, conservative drug treatment, or surgical re-intervention.

Two-versus three-screw osteosynthesis of the mandibular condylar head: A finite element analysis.

Titanium screws are commonly used for osteosynthesis of mandibular condylar head fractures. Evidence suggests that the insertion of three screws may result in better fracture stability. Two screws only, on the other hand, could reduce adverse effects, mainly bone resorption. This study aimed to investigate the biomechanical differences in mandibular condylar head osteosynthesis with two versus three titanium screws using finite element analysis. A finite element model of the mandible with a right type P condylar head fracture fixed with two or three titanium screws was analyzed in ANSYS Mechanical. The geometry of the model assembly was constructed in ANSYS Spaceclaim. Biomechanical load boundary conditions were obtained from a validated musculoskeletal model in AnyBody Modeling System™. The preprocessing of the finite element model and mapping of the obtained boundary conditions was done in docq VIT. Fracture displacement, fragment deformation, von Mises stress distribution, and reaction forces within the screws were evaluated in ANSYS for three different loading scenarios. Finite element analysis showed similar results when comparing osteosynthesis with two versus three titanium screws for all three loading scenarios. Contralateral molar loading resulted in the highest stress on both the fracture and the screws with the maximum von Mises stress being found at the condylar neck. Stress concentration within the screws was found in the fracture gap and was higher in the lateral fragment. In all scenarios, maximum von Mises stress values were smaller when forces were distributed among three screws. However, stability was also adequate when two screws were used. Mandibular condylar head osteosynthesis with two titanium screws appears to provide sufficient fracture stability. Further clinical studies are needed to clarify the implications of these results.

Volumetric Evaluated Bone Resorption After Open Reduction and Internal Fixation of Condylar Head Fractures of the Mandible.

PURPOSE: Decision making in the management of condylar head fractures remains difficult due to its dependency on multiple factors like fracture type, degree of dislocation, patient`s age and dental condition. As open reduction and internal fixation (ORIF) of condylar head fractures (CHFs) becomes more popular, the question of osteosynthesis removal is controversial. So far, information on volumetric changes after ORIF are available for a short-term period (<6 months) only. This study, therefore, was performed to assess bone resorption after condylar head fractures and to follow-up intermediate-term (>1 year) remodelling after removal of metallic osteosynthesis material. Furthermore clinical outcome was measured using Helkimo Index and put in relation with bone resorption. MATERIALS AND METHODS: A retrospective analysis of 19 patients who underwent open reduction and internal fixation of condylar head fractures at the University Hospital of Zürich between January 2016 and April 2018 using intraoperative cone-beam computed tomography repositioning control was conducted. The bone resorption on the condylar head was measured in the course after removal of osteosynthesis material by segmenting and superimposing of the postoperative 3D radiologic follow-up exam (T2) over the initial intraoperative cone-beam computed tomography (T1) using iPlan-CMF software. Complementary Helkimo index was assessed to put resorption rate in relation to clinical outcome. RESULTS: A total of 19 patients fulfilled the inclusion criteria. The mean follow-up time was 15.6 months and the mean bone resorption on the condylar head was -0.348cm3 or -15.29% of segmented condylar head. There was no correlation of clinical outcome and bone resorption. CONCLUSIONS: Helkimo index showed satisfying results; therefore, ORIF of condylar head fracture proves as a feasible treatment option. The mean bone resorption rate of -15.29% in the intermediate-term follow-up time (mean 15.6 months) is comparable to findings of other studies with short-term follow-up time (< 6 months). Thus, postinterventional remodeling activity and resorption seems highest in the first 4 to 6 postoperative months with little further resorption. In prevention of negative sequelae of protruding implants, timing of osteosynthesis material removal after this period of high bone remodeling activity is recommended. The resorption rate showed no correlation to clinical outcome.

ASA score and procedure type predict complications and costs in maxillofacial reconstructive surgery: a retrospective study using a hospital administrative database.

BACKGROUND: Reconstruction of osseous and soft tissue defects after surgical resection of oral cavity cancers can be achieved by a single-stage procedure with a microvascular bone flap or by a two-step approach with a soft tissue flap and subsequent bone augmentation. The therapeutic approach should be selected based on the patient’s needs. Economic pressure requires preoperative risk assessment and estimation of the postoperative course. Flat-rate reimbursement systems via diagnosis-related groups with insufficient morbidity adjustments and financial sanction of medical complications might additionally cause false incentives in the choice of treatment. OBJECTIVE: This study aimed to assess the influence of the type of flap chosen for maxillofacial reconstructive surgery on the total costs. Complication rates of different types of flap surgery and their prediction by a preoperative risk assessment tool (American Society of Anesthesiologists [ASA] score) were determined. Overall, the fairness of the current reimbursement system was rated. METHODS: Patient characteristics, clinical data, and data on total costs and reimbursement of patients aged 18 years and older having undergone maxillofacial reconstructive flap surgery at the University Hospital of Zurich (Switzerland) between 2012 and 2014 were analysed. The preoperative risk was classified by the ASA score. Complications were graded according to the Clavien-Dindo classification system and the comprehensive complication index (CCI). Statistical analysis included Spearman and Pearson rank correlation, Kruskal-Wallis and Mann-Whitney nonparametric tests, and linear regression analysis. RESULTS: 129 patients were included in this study. Soft tissue flaps were performed in 82 patients, of which 56 were radial forearm flaps (43.4%), bone flaps in 41 patients, of which 32 were fibula flaps (24.8%), and combined flaps in 6 patients (4.7%). Patients with fibula flaps showed a significantly higher CCI and higher total costs. Higher preoperative ASA scores were significantly associated with increased length of stay, total costs and complications. Both the ASA score and reconstruction with a radial forearm flap were significant predictors of complications and total costs. Total median costs for radial forearm flaps were CHF 50,560 (reimbursement: CHF 60,851; difference: CHF 10,291) and for fibula flaps CHF 66,982 (reimbursement: CHF 58,218; difference: CHF −8,764). CONCLUSION: The ASA score allows a reliable preoperative assessment of patient outcomes and financial burden in maxillofacial reconstructive flap surgery. The type of flap reconstruction significantly influences complications and ultimately total costs. The current reimbursement system via diagnosis-related groups (DRGs) does not take sufficient account of this fact. Adaptations are therefore needed to prevent misplaced incentives to the detriment of patients.

[Cinematic Rendering in Cone Beam Computed Tomography: Advanced 3D Reconstructions of Dental and Maxillofacial Pathologies]. / Cinematic Rendering in der Digitalen Volumentomografie.

Cinematic rendering (CR) is a novel 3D visualisation technique, which provides photorealistic image reconstructions with a high level of image details. Aim of this case series is to show the application of CR in Cone Beam Computed Tomography (CBCT) in dentomaxillofacial pathologies. Four exemplary CBCTs of clinical dentomaxillofacial cases were selected. 3D CR reconstructions were generated from the CBCT by using a vendor-provided standard CR software. Cases include 1) external tooth resorption, 2) ankylosed maxillary molar tooth, 3) giant cell-associated osteolytic lesion of the mandible, 4) unilateral cleft lip/palate with additional skeletofacial deformity. CBCTs of four patients showing dental and osseous pathologies were successfully reconstructed. Overall, a subjectively improved 3D understanding of the presented pathologies was observed. The CR images seem to present more plasticity, giving a better feeling for the spatial depth of the tissue. CR can be applied to CBCT images in dentomaxillofacial patients. The photorealistic appearance might improve the understanding of complex anatomy or pathology, could facilitate patient communication, and might be helpful for advanced medical education. We see potential in the use of CR for additional 3D visualization. The actual image diagnosis is done in the classic sectional planes. The significance of CR reconstruction for image diagnostics must be investigated in appropriate studies.

Surgical Outcomes of Orbital Fracture Reconstruction Using Patient-Specific Implants.

PURPOSE: Patient-specific implants (PSIs) are known to yield reliable outcomes in orbital wall fracture reconstruction (high precision, smoother operating techniques, and shorter surgical duration). This study analyzed the surgical error and clinical and esthetic outcomes of orbital reconstructions with PSIs. METHODS: This ambispective cohort study enrolled patients who underwent orbital reconstruction using PSIs between October 2016 and January 2018. The study end points were surgical error, indication and duration of surgery, long-term sequelae, revision surgeries, and surgical complications. Surgical error was analyzed by superimposing the postoperative implant position onto the preoperative virtual plan. Both qualitative (heat map) and quantitative (distance) measurements were obtained. RESULTS: Three patients were enrolled prospectively, and 23 were enrolled retrospectively. Indications for surgery were defect size (25 patients), diplopia (10 patients), impaired eye motility (4 patients), and significant enophthalmos (6 patients). At the last patient visit, there were 5 cases of diplopia, 1 case of exophthalmos, and 6 cases of slight enophthalmos of incremental degree. In terms of surgical error, a mean distance of 0.6 mm (95% confidence interval, 0.49 to 0.76), with a mean maximal distance of 3.4 mm (95% confidence interval, 2.79 to 4.02), was noted. No revision surgery was necessary. Lid malposition complications were not observed. However, 1 case each of symblepharon and scleral show were observed. No time-saving component was observed. CONCLUSIONS: PSI use in orbital reconstruction guarantees a preplanned 3-dimensional anatomical shape with a mean surgical error of just 0.6 mm. Our clinical results were similar to those of other protocols; however, warranting a complex 3-dimensional anatomical shape also in large orbital fractures with a low mean surgical error is feasible by using PSIs.

Cell seeding accelerates the vascularization of tissue engineering constructs in hypertensive mice.

Rapid blood vessel ingrowth into transplanted constructs represents the key requirement for successful tissue engineering. Seeding three-dimensional scaffolds with suitable cells is an approved technique for this challenge. Since a plethora of patients suffer from widespread diseases that limit the capacity of neoangiogenesis (e.g., hypertension), we investigated the incorporation of cell-seeded poly-L-lactide-co-glycolide scaffolds in hypertensive (BPH/2J, group A) and nonhypertensive (BPN/3J, group B) mice. Collagen-coated scaffolds (A1 and B1) were additionally seeded with osteoblast-like (A2 and B2) and mesenchymal stem cells (A3 and B3). After implantation into dorsal skinfold chambers, inflammation and newly formed microvessels were measured using repetitive intravital fluorescence microscopy for 2 weeks. Apart from a weak inflammatory response in all groups, significantly increased microvascular densities were found in cell-seeded scaffolds (day 14, A2: 192 ± 12 cm/cm2, A3: 194 ± 10 cm/cm2, B2: 249 ± 19 cm/cm2, B3: 264 ± 17 cm/cm2) when compared with controls (A1: 129 ± 10 cm/cm2, B1: 185 ± 8 cm/cm2). In this context, hypertensive mice showed reduced neoangiogenesis in comparison with nonhypertensive animals. Therefore, seeding approved scaffolds with organ-specific or pluripotent cells is a very promising technique for tissue engineering in hypertensive organisms.

Antimicrobial peptide gene expression in medication-related osteonecrosis of the jaw.

Bisphosphonates and denosumab are commonly used antiresorptive therapies in patients with bone metastasis and osteoporosis. Medication-related osteonecrosis of the jaw (MRONJ) is a serious side effect of these drugs, and infection has been recognized as a contributing factor. Current therapeutic options for MRONJ show limited effectiveness, therefore necessitating novel treatment strategies. Bisphosphonates have recently been reported to induce the expression of antimicrobial peptides (AMPs), an inherent component of the immune system. Therefore, the aim of the present study was to investigate and compare the influence of the anti-RANKL antibody denosumab and bisphosphonates on the gene expression of selected AMPs: human α-defensin-1, human α-defensin-3, human ß-defensin-1, and human ß-defensin-3. Bone specimens were collected from patients with MRONJ who had been treated with bisphosphonates (n = 6) or denosumab (n = 6), and from healthy subjects (n = 6) with no history of treatment with bone metabolism-influencing drugs. Reverse transcription-quantitative polymerase chain reaction was used to quantify the expression levels of selected AMPs. Samples from patients treated with denosumab showed significantly higher mRNA expression of human α-defensin-3 and human ß-defensin-3 than those from healthy subjects. This finding is similar to previously described upregulated expression of human defensins in patients with MRONJ after bisphosphonates treatment. This suggests that the elevated expression of defensins may be at least a part of the mechanism underlying the pathogenesis of osteonecrosis induced by antiresorptive therapies, which can serve as a new target for potential treatment of MRONJ.

Radiologic Analysis of Surgically Treated Fractures of the Condylar Process by an Endoscopic-Assisted Transoral Approach.

PURPOSE: This study analyzed the radiologic outcomes of patients with unilateral mandibular condylar fractures treated with open reduction-internal fixation (ORIF) through a transoral approach. PATIENTS AND METHODS: In this retrospective study, the radiologic images of 40 patients who underwent open reduction-internal fixation through a transoral approach were presented to 2 independent examiners. All patients underwent the surgical procedure between January 2015 and December 2016 at the Department of Cranio-Maxillofacial Surgery at UniversitätsSpital Zürich and were included in a previous functional outcome study. The surgical results were analyzed and graded as poor, acceptable, or good. The examiners declared whether they would have made any intraoperative revisions if the radiologic information had been available. Finally, the examiners estimated the required duration of elastic intermaxillary fixation (IMF) from the radiologic images, which was compared with the actual duration. RESULTS: Fracture reduction was classified as good in 33 cases (82.5%), acceptable in 5 cases, and poor in 2 cases by one examiner and as good in 32 cases (80%), acceptable in 6 cases, and poor in 2 cases by the other examiner. The inter-rater reliability was determined to be good (Cohen κ = 0.92). Correct osteosynthesis placement was found in 19 cases by one examiner and in 21 cases by the other examiner, with good inter-rater reliability (κ = 0.8). Moderate inter-rater reliability (κ = 0.4) was found for the required duration of elastic IMF. Furthermore, the estimated elastic IMF duration matched the actual duration in fewer than half of the cases. CONCLUSIONS: It is feasible to achieve reliably good radiologic results when operating on condylar process fractures by a transoral approach with endoscopic assistance and angled instruments. Intraoperative 3-dimensional imaging enables instant quality control and prompts surgical revision if needed.

3D-cinematic rendering for dental and maxillofacial imaging.

OBJECTIVES: Aim of this technical note is to show the applicability of cinematic rendering (CR) for a photorealistic 3-dimensional (3D) visualization of maxillofacial structures. The focus is on maxillofacial hard tissue pathologies. METHODS: High density maxillofacial pathologies were selected in which CR is applicable. Data from both, CT and cone beam CT (CBCT) were postprocessed using a prototype CR software. RESULTS: CR 3D postprocessing of CT and CBCT imaging data is applicable on high density structures and pathologies such as bones, teeth, and tissue calcifications. Image reconstruction allows for a detailed visualization of surface structures, their plasticity, and 3D configuration. CONCLUSIONS: CR allows for the generation of photorealistic 3D reconstructions of high density structures and pathologies. Potential applications for maxillofacial bone and tooth imaging are given and examples for CT and CBCT images are displayed.

[CAD/CAM Revolution in Craniofacial Reconstruction]. / Die CAD/CAM-Revolution in der kraniofazialen Rekonstruktion.

CAD/CAM Revolution in Craniofacial Reconstruction Abstract. The face is an important part of the personality and at the same time fulfils a variety of tasks. Aesthetics and function form a unique unit. The formation of the field of oral and maxillofacial surgery began in the first decades of the last century. It includes the prevention, diagnosis, therapy and rehabilitation of diseases, injuries, malformations and changes of the complex structures of the face, oral cavity, jaw and teeth. In the meantime, oral and maxillofacial surgery has arrived in the 21st century. Today's oral and maxillofacial surgery is a link between medicine and dentistry and a protagonist in the implementation of digital workflows in clinical care. Individual solutions with patient-specific implants are the rule, computer-assisted techniques support the surgeon in the planning and performing of surgical procedures. This article intends to give you an insight into how our patients benefit from advanced technologies.

Correlation between increased orbital volume and enophthalmos and diplopia in patients with fractures of the orbital floor or the medial orbital wall.

Fractures of the orbital floor and medial orbital wall (blowout fractures) are common midface injuries. Diagnostic methods and treatment options have improved over recent years, due to threedimensional image processing and the use of patient-specific implants. Nonetheless, the indications for orbital reconstructive surgery are still controversial. Previous authors have reported a linear correlation between post-traumatic increases in orbital volume and enophthalmos and diplopia. Post-traumatic increases in orbital volume are often considered to be predictive of long-term symptoms; therefore, it is commonly recommended that orbital volume increases be treated as an indication for early reconstructive surgery. However, the results of this study did not show any statistically significant long-term linear correlation between increased orbital volume and enophthalmos or diplopia, and the performance of orbital volume as a predictor of ocular symptoms was poor. Hence, we do not consider increased post-traumatic orbital volume to be particularly useful for predicting late enophthalmos or diplopia. However, a statistical correlation between fractures of the anterior and medial thirds of the orbital floor and double vision was found. As such, fractures of the middle and anterior third should be regarded as problematic, and surgical reconstruction should be considered in these cases.

Intraoperative 3-dimensional cone beam computed tomographic imaging during reconstruction of the zygoma and orbit.

OBJECTIVE: Fractures of the zygoma and orbit are common facial skeleton injuries. Inadequate reduction and internal fixation may result in functional and aesthetic impairment. The aim of this study was to assess the use of intraoperative 3-dimensional (3-D) cone beam computed tomography (CBCT) for determining the intraoperative revision rate and the need for additional reconstruction of the orbit. STUDY DESIGN: We conducted a retrospective analysis of 48 consecutive patients (15 females, 33 males) suffering from simple or complex zygomatic fractures, seen between June 2015 and October 2016. Intraoperative 3-D CBCT (Xoran Technologies, Ann Arbor, MI) was performed, and the intraoperative image was overlaid on the preoperative image by using iPlan software (Brainlab, Feldkirchen, Germany) for quality control. Categorical variables were cross-tabulated and compared using Fisher's exact test. P values and 95% confidence intervals were assessed. RESULTS: In 6 of 48 patients, intraoperative revision was deemed necessary on the basis of the superimposition on the preoperative images. Five of these 6 patients had comminuted fractures (P = .001). In 7 patients, the indication for orbital reconstruction was revised after intraoperative 3-D CBCT. CONCLUSIONS: Intraoperative 3-D CBCT allows for immediate revision and prevents unnecessary orbital reconstruction.