RESUMEN
Aluminum nanocrystals created by catalyst-driven colloidal synthesis support excellent plasmonic properties, due to their high level of elemental purity, monocrystallinity, and controlled size and shape. Reduction in the rate of nanocrystal growth enables the synthesis of highly anisotropic Al nanowires, nanobars, and singly twinned "nanomoustaches". Electron energy loss spectroscopy was used to study the plasmonic properties of these nanocrystals, spanning the broad energy range needed to map their plasmonic modes. The coupling between these nanocrystals and other plasmonic metal nanostructures, specifically Ag nanocubes and Au films of controlled nanoscale thickness, was investigated. Al nanocrystals show excellent long-term stability under atmospheric conditions, providing a practical alternative to coinage metal-based nanowires in assembled nanoscale devices.
RESUMEN
Aluminum nanocrystals (AlNCs) are of increasing interest as sustainable, earth-abundant nanoparticles for visible wavelength plasmonics and as versatile nanoantennas for energy-efficient plasmonic photocatalysis. Here, we show that annealing AlNCs under various gases and thermal conditions induces substantial, systematic changes in their surface oxide, modifying crystalline phase, surface morphology, density, and defect type and concentration. Tailoring the surface oxide properties enables AlNCs to function as all-aluminum-based antenna-reactor plasmonic photocatalysts, with the modified surface oxides providing varying reactivities and selectivities for several chemical reactions.
RESUMEN
For the conversion of CO2 into fuels and chemical feedstocks, hybrid gas/liquid-fed electrochemical flow reactors provide advantages in selectivity and production rates over traditional liquid phase reactors. However, fundamental questions remain about how to optimize conditions to produce desired products. Using an alkaline electrolyte to suppress hydrogen formation and a gas diffusion electrode catalyst composed of copper nanoparticles on carbon nanospikes, we investigate how hydrocarbon product selectivity in the CO2 reduction reaction in hybrid reactors depends on three experimentally controllable parameters: (1) supply of dry or humidified CO2 gas, (2) applied potential, and (3) electrolyte temperature. Changing from dry to humidified CO2 dramatically alters product selectivity from C2 products ethanol and acetic acid to ethylene and C1 products formic acid and methane. Water vapor evidently influences product selectivity of reactions that occur on the gas-facing side of the catalyst by adding a source of protons that alters reaction pathways and intermediates.
RESUMEN
The performance of photocatalysts and photovoltaic devices can be enhanced by energetic charge carriers produced from plasmon decay, and the lifetime of these energetic carriers greatly affects overall efficiencies. Although hot electron lifetimes in plasmonic gold nanoparticles have been investigated, hot hole lifetimes have not been as thoroughly studied in plasmonic systems. Here, we demonstrate time-resolved emission upconversion microscopy and use it to resolve the lifetime and energy-dependent cooling of d-band holes formed in gold nanoparticles by plasmon excitation and by following plasmon decay into interband and then intraband electron-hole pairs.
RESUMEN
We present a general framework for inverse design of nanopatterned surfaces that maximize spatially averaged surface-enhanced Raman (SERS) spectra from molecules distributed randomly throughout a material or fluid, building upon a recently proposed trace formulation for optimizing incoherent emission. This leads to radically different designs than optimizing SERS emission at a single known location, as we illustrate using several 2D design problems addressing effects of hot-spot density, angular selectivity, and nonlinear damage. We obtain optimized structures that perform about 4 × better than coating with optimized spheres or bowtie structures and about 20 × better when the nonlinear damage effects are included.
RESUMEN
Plasmonic nanostructures have attracted increasing interest in the fields of photochemistry and photocatalysis for their ability to enhance reactivity and tune reaction selectivity, a benefit of their strong interactions with light and their multiple energy decay mechanisms. Here we introduce the use of earth-abundant plasmonic aluminum nanoparticles as a promising renewable detoxifier of the sulfur mustard simulant 2-chloroethylethylsulfide through gas phase photodecomposition. Analysis of the decomposition products indicates that C-S bond breaking is facilitated under illumination, while C-Cl breaking and HCl elimination are favored under thermocatalytic (dark) conditions. This difference in reaction pathways illuminates the potential of plasmonic nanoparticles to tailor reaction selectivity toward less hazardous products in the detoxification of chemical warfare agents. Moreover, the photocatalytic activity of the Al nanoparticles can be regenerated almost completely after the reaction concludes through a simple surface treatment.
Asunto(s)
Sustancias para la Guerra Química , Gas Mostaza , Nanopartículas , Aluminio , Sustancias para la Guerra Química/química , Gas Mostaza/química , FotoquímicaRESUMEN
Although gas phase rotational spectroscopy is a mature field for which millions of rotational spectral lines have been measured in hundreds of molecules with sub-MHz accuracy, it remains a challenge to measure these rotational spectra in excited vibrational modes with the same accuracy. Recently, it was demonstrated that virtually any rotational transition in excited vibrational modes of most molecules may be made to lase when pumped by a continuously tunable quantum cascade laser (QCL). Here, we demonstrate how an infrared QCL may be used to enhance absorption strength or induce lasing of terahertz rotational transitions in highly excited vibrational modes in order to measure their frequencies more accurately. To illustrate the concepts, we used a tunable QCL to excite v3 R-branch transitions in N2O and either enhanced absorption or induced lasing on 20 v3 rotational transitions, whose frequencies between 299 and 772 GHz were then measured using either heterodyne or modulation spectroscopy. The spectra were fitted to obtain the rotational constants B3 and D3, which reproduce the measured spectra to within the experimental uncertainty of ± 5 kHz. We then show how this technique may be generalized by estimating the threshold power to make any rotational transition lase in any N2O vibrational mode.
Asunto(s)
Láseres de Semiconductores , Vibración , Análisis EspectralRESUMEN
Plasmon-induced photocatalysis is a topic of rapidly increasing interest, due to its potential for substantially lowering reaction barriers and temperatures and for increasing the selectivity of chemical reactions. Of particular interest for plasmonic photocatalysis are antenna-reactor nanoparticles and nanostructures, which combine the strong light-coupling of plasmonic nanostructures with reactors that enhance chemical specificity. Here, we introduce Al@TiO2 core-shell nanoparticles, combining earth-abundant Al nanocrystalline cores with TiO2 layers of tunable thickness. We show that these nanoparticles are active photocatalysts for the hot electron-mediated H2 dissociation reaction as well as for hot hole-mediated methanol dehydration. The wavelength dependence of the reaction rates suggests that the photocatalytic mechanism is plasmonic hot carrier generation with subsequent transfer of the hot carriers into the TiO2 layer. The Al@TiO2 antenna-reactor provides an earth-abundant solution for the future design of visible-light-driven plasmonic photocatalysts.
RESUMEN
The terahertz region of the electromagnetic spectrum has been the least utilized owing to inadequacies of available sources. We introduce a compact, widely frequency-tunable, extremely bright source of terahertz radiation: a gas-phase molecular laser based on rotational population inversions optically pumped by a quantum cascade laser. By identifying the essential parameters that determine the suitability of a molecule for a terahertz laser, almost any rotational transition of almost any molecular gas can be made to lase. Nitrous oxide is used to illustrate the broad tunability over 37 lines spanning 0.251 to 0.955 terahertz, each with kilohertz linewidths. Our analysis shows that laser lines spanning more than 1 terahertz with powers greater than 1 milliwatt are possible from many molecular gases pumped by quantum cascade lasers.
RESUMEN
Rotational spectroscopy has been used for decades for virtually unambiguous identification of gas phase molecular species, but it has rarely been used for the quantitative analysis of molecular concentrations. Challenges have included the nontrivial reconstruction of integrated line strengths from modulated spectra, the correlation of pressure-dependent line shape and strength with partial pressure, and the multiple standing wave interferences and modulation-induced line shape asymmetries that sensitively depend on source-chamber-detector alignment. Here, we introduce a quantitative analysis methodology that overcomes these challenges, reproducibly and accurately recovering gas molecule concentrations using a calibration procedure with a reference gas and a conversion based on calculated line strengths. The technique uses frequency-modulated rotational spectroscopy and recovers the integrated line strength from a Voigt line shape that spans the Doppler- and pressure-broadened regimes. Gas concentrations were accurately quantified to within the experimental error over more than three orders of magnitude, as confirmed by the cross calibration between CO and N2O and by the accurate recovery of the natural abundances of four N2O isotopologues. With this methodology, concentrations of hundreds of molecular species may be quantitatively measured down to the femtomolar regime using only a single calibration curve and the readily available libraries of calculated integrated line strengths, demonstrating the power of this technique for the quantitative gas-phase detection, identification, and quantification.
RESUMEN
Industrial scale catalytic chemical synthesis demands both high reaction rates and high product yields. In exothermic chemical reactions, these conflicting objectives require a complex balance of optimized catalysts, high temperatures, high pressures, and multiple recycling steps, as in the energy-intensive Haber-Bosch process for ammonia synthesis. Here we report that illumination of a conventional ruthenium-based catalyst produces ammonia with high reaction rates and high conversion yields. Indeed, using continuous wave light-emitting diodes that simulate concentrated solar illumination, ammonia is copiously produced without any external heating or elevated pressures. The possibility of nonthermal plasmonic effects are excluded by carefully comparing the catalytic activity under direct and indirect illumination. Instead, thermal gradients, created and controlled by photothermal heating of the illuminated catalyst surface, are shown to be responsible for the high reaction rates and conversion yields. This nonisothermal environment enhances both by balancing the conflicting requirements of kinetics and thermodynamics, heralding the use of optically controlled thermal gradients as a universal, scalable strategy for the catalysis of many exothermic chemical reactions.
RESUMEN
We present both an innovative theoretical model and an experimental validation of a molecular gas optically pumped far-infrared (OPFIR) laser at 0.25 THz that exhibits 10× greater efficiency (39% of the Manley-Rowe limit) and 1,000× smaller volume than comparable commercial lasers. Unlike previous OPFIR-laser models involving only a few energy levels that failed even qualitatively to match experiments at high pressures, our ab initio theory matches experiments quantitatively, within experimental uncertainties with no free parameters, by accurately capturing the interplay of millions of degrees of freedom in the laser. We show that previous OPFIR lasers were inefficient simply by being too large and that high powers favor high pressures and small cavities. We believe that these results will revive interest in OPFIR laser as a powerful and compact source of terahertz radiation.
RESUMEN
In plasmon-enhanced heterogeneous catalysis, illumination accelerates reaction rates by generating hot carriers and hot surfaces in the constituent nanostructured metals. In order to understand how photogenerated carriers enhance the nonthermal reaction rate, the effects of photothermal heating and thermal gradients in the catalyst bed must be confidently and quantitatively characterized. This is a challenging task considering the conflating effects of light absorption, heat transport, and reaction energetics. Here, we introduce a methodology to distinguish the thermal and nonthermal contributions from plasmon-enhanced catalysts, demonstrated by illuminated rhodium nanoparticles on oxide supports to catalyze the CO2 methanation reaction. By simultaneously measuring the total reaction rate and the temperature gradient of the catalyst bed, the effective thermal reaction rate may be extracted. The residual nonthermal rate of the plasmon-enhanced reaction is found to grow with a superlinear dependence on illumination intensity, and its apparent quantum efficiency reaches â¼46% on a Rh/TiO2 catalyst at a surface temperature of 350 °C. Heat and light are shown to work synergistically in these reactions: the higher the temperature, the higher the overall nonthermal efficiency in plasmon-enhanced catalysis.
RESUMEN
For applications of surface-enhanced spectroscopy and photocatalysis, the ultraviolet (UV) plasmonic behavior and charge distribution within rhodium nanocubes is explored by a detailed numerical analysis. The strongest plasmonic hot-spots and charge concentrations are located at the corners and edges of the nanocubes, exactly where they are the most spectroscopically and catalytically active. Because intense catalytic activity at corners and edges will reshape these nanoparticles, distortions of the cubical shape, including surface concavity, surface convexity, and rounded corners and edges, are also explored to quantify how significantly these distortions deteriorate their plasmonic and photocatalytic properties. The fact that the highest fields and highest carrier concentrations occur in the corners and edges of Rh nanocubes (NCs) confirms their tremendous potential for plasmon-enhanced spectroscopy and catalysis. It is shown that this opportunity is fortuitously enhanced by the fact that even higher field and charge concentrations reside at the interface between the metal nanoparticle and a dielectric or semiconductor support, precisely where the most chemically active sites are located.
RESUMEN
The combination of wide bandwidth W-band inverse synthetic aperture radar imagery and high-fidelity numerical simulations has been used to identify distinguishing signatures from simple metallic and dielectric targets. Targets are located with millimeter-scale accuracy using super-resolution techniques. Radon transform reconstructions of the returns from rotated targets approached the image quality of the complete data set in a fraction of the time by sampling as few as 10 angles. The limitations of shooting-and-bouncing ray simulations at high frequencies are illustrated through a critical comparison of their predictions with the measured data and the method of moments simulations, indicating the importance of accurately capturing the obfuscating role played by multipath interference in complex targets.
RESUMEN
Photocatalysis has not found widespread industrial adoption, in spite of decades of active research, because the challenges associated with catalyst illumination and turnover outweigh the touted advantages of replacing heat with light. A demonstration that light can control product selectivity in complex chemical reactions could prove to be transformative. Here, we show how the recently demonstrated plasmonic behaviour of rhodium nanoparticles profoundly improves their already excellent catalytic properties by simultaneously reducing the activation energy and selectively producing a desired but kinetically unfavourable product for the important carbon dioxide hydrogenation reaction. Methane is almost exclusively produced when rhodium nanoparticles are mildly illuminated as hot electrons are injected into the anti-bonding orbital of a critical intermediate, while carbon monoxide and methane are equally produced without illumination. The reduced activation energy and super-linear dependence on light intensity cause the unheated photocatalytic methane production rate to exceed the thermocatalytic rate at 350 °C.
RESUMEN
In order to improve speed and efficiency over traditional scanning methods, a Bayesian compressive sensing algorithm using adaptive spatial sampling is developed for single detector millimeter wave synthetic aperture imaging. The application of this algorithm is compared to random sampling to demonstrate that the adaptive algorithm converges faster for simple targets and generates more reliable reconstructions for complex targets.
RESUMEN
The ultraviolet (UV) range presents new challenges for plasmonics, with interesting applications ranging from engineering to biology. In previous research, gallium, aluminum, and magnesium were found to be very promising UV plasmonic metals. However, a native oxide shell surrounds nanostructures of these metals that affects their plasmonic response. Here, through a nanoparticle-oxide core-shell model, we present a detailed electromagnetic analysis of how oxidation alters the UV-plasmonic response of spherical or hemisphere-on-substrate nanostructures made of those metals by analyzing the spectral evolution of two parameters: the absorption efficiency (far-field analysis) and the enhancement of the local intensity averaged over the nanoparticle surface (near-field analysis).
RESUMEN
Organic-inorganic hybrid materials formed by sequential vapor infiltration (SVI) of trimethylaluminum into polyester fibers are demonstrated, and the photoluminescence of the fibers is evaluated using a combined UV-vis and photoluminescence excitation (PLE) spectroscopy approach. The optical activity of the modified fibers depends on infiltration thermal processing conditions and is attributed to the reaction mechanisms taking place at different temperatures. At low temperatures a single excitation band and dual emission bands are observed, while, at high temperatures, two distinct absorption bands and one emission band are observed, suggesting that the physical and chemical structure of the resulting hybrid material depends on the SVI temperature. Along with enhancing the photoluminescence intensity of the PET fibers, the internal quantum efficiency also increased to 5-fold from â¼4-5% to â¼24%. SVI processing also improved the photocatalytic activity of the fibers, as demonstrated by photodeposition of Ag and Au metal particles out of an aqueous metal salt solution onto fiber surfaces via UVA light exposure. Toward applications in flexible electronics, well-defined patterning of the metallic materials is achieved by using light masking and focused laser rastering approaches.
RESUMEN
The intense local field induced near metallic nanostructures provides strong enhancements for surface-enhanced spectroscopies, a major focus of plasmonics research over the past decade. Here we consider that plasmonic nanoparticles can also induce remarkably large electromagnetic field gradients near their surfaces. Sizeable field gradients can excite dipole-forbidden transitions in nearby atoms or molecules and provide unique spectroscopic fingerprinting for chemical and bimolecular sensing. Specifically, we investigate how the local field gradients near metallic nanostructures depend on geometry, polarization, and wavelength. We introduce the concept of the local angular momentum (LAM) vector as a useful figure of merit for the design of nanostructures that provide large field gradients. This quantity, based on integrated fields rather than field gradients, is particularly well-suited for optimization using numerical grid-based full wave electromagnetic simulations. The LAM vector has a more compact structure than the gradient matrix and can be straightforwardly associated with the angular momentum of the electromagnetic field incident on the plasmonic structures.