Application of ZIF-8 nanocomposite membrane in microbial desalination cells for simultaneous heavy metal removal and biofouling prevention.

Microbial desalination cells (MDC) syndicate the advantage of physical separation by using membranes to create conditions required for Bioelectrochemical processes for the treatment of various domestic and industrial wastewater, while simultaneously desalinating saline water and generating bioenergy. However, since the introduction of this technology, heavy metal removal has been a challenge, and membrane fouling has become a major bottleneck limiting the optimum performance and efficiency of this technology. This study incorporated the use of ZIF-8 nanocomposite membrane via phase inversion mechanism in MDC for simultaneous heavy metal removal and membrane biofouling prevention. The study was conducted in two MDC systems; MDC-Control (without the ZIF-8 nanocomposite membrane) and MDC with ZIF-8 nanocomposite membrane. The results from the experiment shown that maximum removal efficiency of 85.7%, 84.3%, 84.0%, and 90.61% was obtained for Cu2+, Zn2+, Pb2+, and Cd2+ respectively in MDC-ZIF-8, while MDC control showed 54.17%, 59.71%, 51.94%, and 54.17%. The results were well fitted to the Langmuir adsorption isotherm with correlation coefficients (R2) > 0.99 in all cases for MDC-ZIF-8. A maximum adsorption capacity (Qmax) of 292 mg g-1 was attained for all four metal ions in MDC-ZIF-8. Besides, after 38 days of continuous operation with two complete desalination for both systems, the SEM-EDS characterization analysis, polarization characteristics, and power generation revealed antifouling characteristics of ZIF-8 nanocomposite membrane incorporated in MDC. The integration of the ZIF-8 nanocomposite membrane proved to be simultaneously efficient in biofouling prevention and heavy metal removal without jeopardizing the system's ability for wastewater treatment, bioelectricity generation, and desalination processes.

Macro problems from microplastics: Toward a sustainable policy framework for managing microplastic waste in Africa.

Microplastic pollution is a ubiquitous and emerging environmental and public health concern in Africa due to increased plastic production, product and waste importation, and usage. While studies on the environmental monitoring and characterization of microplastics demonstrated the urgent need for a drastic reduction in plastic waste generation, the effectiveness of the various regulatory and policy interventions implemented or proposed in Africa countries remains poorly understood. We critically examined policies, legislations, and regulations enacted to control microplastic pollution in Africa to develop a sustainable, harmonized framework for the coordinated reduction of plastic waste generation across Africa. Analysis of the interventions revealed most African countries employed traditional perspective (i.e., command-and-control) approaches, whereby state instruments such as plastic ban, production and importation levies, and consumer taxes were enacted. However, the continued increase in microplastic waste generation suggests traditional perspective approaches might not be effective in Africa. Although rarely used in Africa, market-oriented approaches such as private-public waste management are often effective in controlling plastic pollution. Hence, we proposed a bottom-up hybrid regulatory approach for managing microplastics pollution in Africa, involving price-based, right-base, legislation and behavioral frameworks based on best practices in microplastic waste management.

Comparative Studies of Recirculatory Microbial Desalination Cell-Microbial Electrolysis Cell Coupled Systems.

The recirculatory microbial desalination cell-microbial electrolysis cell (MDC-MEC) coupled system is a novel technology that generates power, treats wastewater, and supports desalination through eco-friendly processes. This study focuses on the simultaneous efficient removal of Fe2+ and Pb2+ in the MEC and ammonium ions in the MDC. It also evaluates the performances of dual-chambered MEC (DCMEC) and single-chambered MEC (SCMEC), coupled with MDC with Ferricyanide as catholyte (MDCF) in heavy metals (Pb2+ and Fe2+) removal, in addition to the production of voltage, current, and power within a 48-h cycle. The SCMEC has a higher Pb2+ (74.61%) and Fe2+ (85.05%) removal efficiency during the 48-h cycle than the DCMEC due to the simultaneous use of microbial biosorption and the cathodic reduction potential. The DCMEC had a higher current density of 753.62 mAm-2 than that of SCMEC, i.e., 463.77 mAm-2, which influences higher desalination in the MDCF than in the SCMEC within the 48-h cycle. The MDCF produces a higher voltage (627 mV) than Control 1, MDC (505 mV), as a power source to the two MECs. Stable electrolytes' pH and conductivities provide a conducive operation of the coupled system. This study lays a solid background for the type of MDC-MEC coupled systems needed for industrial scale-up.

Assessing the factors influencing the performance of constructed wetland-microbial fuel cell integration.

Constructed wetland coupled microbial fuel cell (CW-MFC) systems integrate an aerobic zone and an anaerobic zone to treat wastewater and to generate bioenergy. The concept evolves based on the principles of constructed wetlands and plant MFC (one form of photosynthetic MFC) technologies, of which all contain plants. CW-MFC have been used in a wide range of application since their introduction in 2012 for wastewater treatment and electricity generation. However, there are few reports on the individual components and their performance on CW-MFC efficiency. The performance and efficiency of this technology are significantly influenced by several factors such as the organic load and sewage composition, hydraulic retention time, cathode dissolved oxygen, electrode materials and wetland plants. This paper reviews the influence of the macrophyte (wetland plants) component, substrate material, microorganisms, electrode material and hydraulic retention time (HRT) on CW-MFC performance in wastewater treatment and electricity generation. The study assesses the relationship between these parameters and discusses progress in the development of this integrated system to date.

Performance of Exoelectrogenic Bacteria Used in Microbial Desalination Cell Technology.

The tri-functional purpose of Microbial Desalination Cell (MDC) has shown a great promise in our current scarcity of water, an increase in water pollution and the high cost of electricity production. As a biological system, the baseline force that drives its performance is the presence of exoelectrogens in the anode chamber. Their presence in the anodic chamber of MDC systems enables the treatment of water, desalination of seawater, and the production of electrical energy. This study reviews the characteristics of exoelectrogens, as a driving force in MDC and examines factors which influence their growth and the performance efficiency of MDC systems. It also addresses the efficiency of mixed cultures with certain predominant species as compared to pure cultures used in MDC systems. Furthermore, the study suggests the need to genetically modify certain predominant strains in mixed cultures to enhance their performance in COD removal, desalination and power output and the integration of MDC with other technologies for cost-effective processes.