Theoretical evaluation of the impact of diverse treatment conditions by calculation of the tumor control probability (TCP) of simulated cervical cancer Hyperthermia-Radiotherapy (HT-RT) treatments in-silico.

INTRODUCTION: Hyperthermia (HT) induces various cellular biological processes, such as repair impairment and direct HT cell killing. In this context, in-silico biophysical models that translate deviations in the treatment conditions into clinical outcome variations may be used to study the extent of such processes and their influence on combined hyperthermia plus radiotherapy (HT + RT) treatments under varying conditions. METHODS: An extended linear-quadratic model calibrated for SiHa and HeLa cell lines (cervical cancer) was used to theoretically study the impact of varying HT treatment conditions on radiosensitization and direct HT cell killing effect. Simulated patients were generated to compute the Tumor Control Probability (TCP) under different HT conditions (number of HT sessions, temperature and time interval), which were randomly selected within margins based on reported patient data. RESULTS: Under the studied conditions, model-based simulations suggested a treatment improvement with a total CEM43 thermal dose of approximately 10 min. Additionally, for a given thermal dose, TCP increased with the number of HT sessions. Furthermore, in the simulations, we showed that the TCP dependence on the temperature/time interval is more correlated with the mean value than with the minimum/maximum value and that comparing the treatment outcome with the mean temperature can be an excellent strategy for studying the time interval effect. CONCLUSION: The use of thermoradiobiological models allows us to theoretically study the impact of varying thermal conditions on HT + RT treatment outcomes. This approach can be used to optimize HT treatments, design clinical trials, and interpret patient data.

Algorithmic extraction of smartphone accelerometer-derived mechano-biological descriptors of resistance exercise is robust to changes in intensity and velocity.

BACKGROUND: It was shown that single repetition, contraction-phase specific and total time-under-tension (TUT) can be extracted reliably and validly from smartphone accelerometer-derived data of resistance exercise machines using user-determined resistance exercise velocities at 60% one repetition maximum (1-RM). However, it remained unclear how robust the extraction of these mechano-biological descriptors is over a wide range of movement velocities (slow- versus fast-movement velocity) and intensities (30% 1-RM versus 80% 1-RM) that reflect the interindividual variability during resistance exercise. OBJECTIVE: In this work, we examined whether the manipulation of velocity or intensity would disrupt an algorithmic extraction of single repetitions, contraction-phase specific and total TUT. METHODS: Twenty-seven participants performed four sets of three repetitions of their 30% and 80% 1-RM with velocities of 1 s, 2 s, 6 s and 8 s per repetition, respectively. An algorithm extracted the number of repetitions, single repetition, contraction-phase specific and total TUT. All exercises were video-recorded. The video recordings served as the gold standard to which algorithmically-derived TUT was compared. The agreement between the methods was examined using Limits of Agreement (LoA). The Pearson correlation coefficients were used to calculate the association, and the intraclass correlation coefficient (ICC 2.1) examined the interrater reliability. RESULTS: The calculated error rate for the algorithmic detection of the number of single repetitions derived from two smartphones accelerometers was 1.9%. The comparison between algorithmically-derived, contraction-phase specific TUT against video, revealed a high degree of correlation (r > 0.94) for both exercise machines. The agreement between the two methods was high on both exercise machines, intensities and velocities and was as follows: LoA ranged from -0.21 to 0.22 seconds for single repetition TUT (2.57% of mean TUT), from -0.24 to 0.22 seconds for concentric contraction TUT (6.25% of mean TUT), from -0.22 to 0.24 seconds for eccentric contraction TUT (5.52% of mean TUT) and from -1.97 to 1.00 seconds for total TUT (5.13% of mean TUT). Interrater reliability for single repetition, contraction-phase specific TUT was high (ICC > 0.99). CONCLUSION: Neither intensity nor velocity disrupts the proposed algorithmic data extraction approach. Therefore, smartphone accelerometers can be used to extract scientific mechano-biological descriptors of dynamic resistance exercise with intensities ranging from 30% to 80% of the 1-RM with velocities ranging from 1 s to 8 s per repetition, respectively, thus making this simple method a reliable tool for resistance exercise mechano-biological descriptors extraction.

Holistic View on Cell Survival and DNA Damage: How Model-Based Data Analysis Supports Exploration of Dynamics in Biological Systems.

In this work, a method is established to calibrate a model that describes the basic dynamics of DNA damage and repair. The model can be used to extend planning for radiotherapy and hyperthermia in order to include the biological effects. In contrast to "syntactic" models (e.g., describing molecular kinetics), the model used here describes radiobiological semantics, resulting in a more powerful model but also in a far more challenging calibration. Model calibration is attempted from clonogenic assay data (doses of 0-6 Gy) and from time-resolved comet assay data obtained within 6 h after irradiation with 6 Gy. It is demonstrated that either of those two sources of information alone is insufficient for successful model calibration, and that both sources of information combined in a holistic approach are necessary to find viable model parameters. Approximate Bayesian computation (ABC) with simulated annealing is used for parameter search, revealing two aspects that are beneficial to resolving the calibration problem: (1) assessing posterior parameter distributions instead of point-estimates and (2) combining calibration runs from different assays by joining posterior distributions instead of running a single calibration run with a combined, computationally very expensive objective function.

Using smartphone accelerometer data to obtain scientific mechanical-biological descriptors of resistance exercise training.

BACKGROUND: Single repetition, contraction-phase specific and total time-under-tension (TUT) are crucial mechano-biological descriptors associated with distinct morphological, molecular and metabolic muscular adaptations in response to exercise, rehabilitation and/or fighting sarcopenia. However, to date, no simple, reliable and valid method has been developed to measure these descriptors. OBJECTIVE: In this study we aimed to test whether accelerometer data obtained from a standard smartphone placed on the weight stack can be used to extract single repetition, contraction-phase specific and total TUT. METHODS: Twenty-two participants performed two sets of ten repetitions of their 60% one repetition maximum with a self-paced velocity on nine commonly used resistance exercise machines. Two identical smartphones were attached on the resistance exercise weight stacks and recorded all user-exerted accelerations. An algorithm extracted the number of repetitions, single repetition, contraction-phase specific and total TUT. All exercises were video-recorded. The TUT determined from the algorithmically-derived mechano-biological descriptors was compared with the video recordings that served as the gold standard. The agreement between the methods was examined using Limits of Agreement (LoA). The association was calculated using the Pearson correlation coefficients and interrater reliability was determined using the intraclass correlation coefficient (ICC 2.1). RESULTS: The error rate of the algorithmic detection of single repetitions derived from two smartphones accelerometers was 0.16%. Comparing algorithmically-derived, contraction-phase specific TUT against video, showed a high degree of correlation (r>0.93) for all exercise machines. Agreement between the two methods was high on all exercise machines as follows: LoA ranged from -0.3 to 0.3 seconds for single repetition TUT (0.1% of mean TUT), from -0.6 to 0.3 seconds for concentric contraction TUT (7.1% of mean TUT), from -0.3 to 0.5 seconds for eccentric contraction TUT (4.1% of mean TUT) and from -1.9 to 1.1 seconds for total TUT (0.5% of mean TUT). Interrater reliability for single repetition, contraction-phase specific TUT was high (ICC > 0.99). CONCLUSION: Data from smartphone accelerometer derived resistance exercise can be used to validly and reliably extract crucial mechano-biological descriptors. Moreover, the presented multi-analytical algorithmic approach enables researchers and clinicians to reliably and validly report missing mechano-biological descriptors.

Dynamic In Vivo Profiling of DNA Damage and Repair after Radiotherapy Using Canine Patients as a Model.

Time resolved data of DNA damage and repair after radiotherapy elucidates the relation between damage, repair, and cell survival. While well characterized in vitro, little is known about the time-course of DNA damage response in tumors sampled from individual patients. Kinetics of DNA damage after radiotherapy was assessed in eight dogs using repeated in vivo samples of tumor and co-irradiated normal tissue analyzed with comet assay and phosphorylated H2AX (γH2AX) immunohistochemistry. In vivo results were then compared (in silico) with a dynamic mathematical model for DNA damage formation and repair. Maximum %DNA in tail was observed at 15-60 min after irradiation, with a rapid decrease. Time-courses of γH2AX-foci paralleled these findings with a small time delay and were not influenced by covariates. The evolutionary parameter search based on %DNA in tail revealed a good fit of the DNA repair model to in vivo data for pooled sarcoma time-courses, but fits for individual sarcoma time-courses suffer from the heterogeneous nature of the in vivo data. It was possible to follow dynamics of comet tail intensity and γH2AX-foci during a course of radiation using a minimally invasive approach. DNA repair can be quantitatively investigated as time-courses of individual patients by integrating this resulting data into a dynamic mathematical model.

Mechanical catalysis on the centimetre scale.

Enzymes play important roles in catalysing biochemical transaction paths, acting as logical machines through the morphology of the processes. A key challenge in elucidating the nature of these systems, and for engineering manufacturing methods inspired by biochemical reactions, is to attain a comprehensive understanding of the stereochemical ground rules of enzymatic reactions. Here, we present a model of catalysis that can be performed magnetically by centimetre-sized passive floating units. The designed system, which is equipped with permanent magnets only, passively obeys the local causalities imposed by magnetic interactions, albeit it shows a spatial behaviour and an energy profile analogous to those of biochemical enzymes. In this process, the enzyme units trigger physical conformation changes of the target by levelling out the magnetic potential barrier (activation potential) to a funnel type and, thus, induce cascading conformation changes of the targeted substrate units reacting in parallel. The inhibitor units, conversely, suppress such changes by increasing the potential. Because the model is purely mechanical and established on a physics basis in the absence of turbulence, each performance can be explained by the morphology of the unit, extending the definition of catalysis to systems of alternative scales.

Morphological computation and morphological control: steps toward a formal theory and applications.

Morphological computation can be loosely defined as the exploitation of the shape, material properties, and physical dynamics of a physical system to improve the efficiency of a computation. Morphological control is the application of morphological computing to a control task. In its theoretical part, this article sharpens and extends these definitions by suggesting new formalized definitions and identifying areas in which the definitions we propose are still inadequate. We go on to describe three ongoing studies, in which we are applying morphological control to problems in medicine and in chemistry. The first involves an inflatable support system for patients with impaired movement, and is based on macroscopic physics and concepts already tested in robotics. The two other case studies (self-assembly of chemical microreactors; models of induced cell repair in radio-oncology) describe processes and devices on the micrometer scale, in which the emergent dynamics of the underlying physical system (e.g., phase transitions) are dominated by stochastic processes such as diffusion.

Using state variables to model the response of tumour cells to radiation and heat: a novel multi-hit-repair approach.

In order to overcome the limitations of the linear-quadratic model and include synergistic effects of heat and radiation, a novel radiobiological model is proposed. The model is based on a chain of cell populations which are characterized by the number of radiation induced damages (hits). Cells can shift downward along the chain by collecting hits and upward by a repair process. The repair process is governed by a repair probability which depends upon state variables used for a simplistic description of the impact of heat and radiation upon repair proteins. Based on the parameters used, populations up to 4-5 hits are relevant for the calculation of the survival. The model describes intuitively the mathematical behaviour of apoptotic and nonapoptotic cell death. Linear-quadratic-linear behaviour of the logarithmic cell survival, fractionation, and (with one exception) the dose rate dependencies are described correctly. The model covers the time gap dependence of the synergistic cell killing due to combined application of heat and radiation, but further validation of the proposed approach based on experimental data is needed. However, the model offers a work bench for testing different biological concepts of damage induction, repair, and statistical approaches for calculating the variables of state.

The MATCHIT automaton: exploiting compartmentalization for the synthesis of branched polymers.

We propose an automaton, a theoretical framework that demonstrates how to improve the yield of the synthesis of branched chemical polymer reactions. This is achieved by separating substeps of the path of synthesis into compartments. We use chemical containers (chemtainers) to carry the substances through a sequence of fixed successive compartments. We describe the automaton in mathematical terms and show how it can be configured automatically in order to synthesize a given branched polymer target. The algorithm we present finds an optimal path of synthesis in linear time. We discuss how the automaton models compartmentalized structures found in cells, such as the endoplasmic reticulum and the Golgi apparatus, and we show how this compartmentalization can be exploited for the synthesis of branched polymers such as oligosaccharides. Lastly, we show examples of artificial branched polymers and discuss how the automaton can be configured to synthesize them with maximal yield.

The role of feedback in morphological computation with compliant bodies.

The generation of robust periodic movements of complex nonlinear robotic systems is inherently difficult, especially, if parts of the robots are compliant. It has previously been proposed that complex nonlinear features of a robot, similarly as in biological organisms, might possibly facilitate its control. This bold hypothesis, commonly referred to as morphological computation, has recently received some theoretical support by Hauser et al. (Biol Cybern 105:355-370, doi: 10.1007/s00422-012-0471-0 , 2012). We show in this article that this theoretical support can be extended to cover not only the case of fading memory responses to external signals, but also the essential case of autonomous generation of adaptive periodic patterns, as, e.g., needed for locomotion. The theory predicts that feedback into the morphological computing system is necessary and sufficient for such tasks, for which a fading memory is insufficient. We demonstrate the viability of this theoretical analysis through computer simulations of complex nonlinear mass-spring systems that are trained to generate a large diversity of periodic movements by adapting the weights of a simple linear feedback device. Hence, the results of this article substantially enlarge the theoretically tractable application domain of morphological computation in robotics, and also provide new paradigms for understanding control principles of biological organisms.

A stochastic model of autocatalytic reaction networks.

Autocatalytic cycles are rather widespread in nature and in several theoretical models of catalytic reaction networks their emergence is hypothesized to be inevitable when the network is or becomes sufficiently complex. Nevertheless, the emergence of autocatalytic cycles has been never observed in wet laboratory experiments. Here, we present a novel model of catalytic reaction networks with the explicit goal of filling the gap between theoretical predictions and experimental findings. The model is based on previous study of Kauffman, with new features in the introduction of a stochastic algorithm to describe the dynamics and in the possibility to increase the number of elements and reactions according to the dynamical evolution of the system. Furthermore, the introduction of a temporal threshold allows the detection of cycles even in our context of a stochastic model with asynchronous update. In this study, we describe the model and present results concerning the effect on the overall dynamics of varying (a) the average residence time of the elements in the reactor, (b) both the composition of the firing disk and the concentration of the molecules belonging to it, (c) the composition of the incoming flux.

Towards a theoretical foundation for morphological computation with compliant bodies.

The control of compliant robots is, due to their often nonlinear and complex dynamics, inherently difficult.The vision of morphological computation proposes to view these aspects not only as problems, but rather also as parts of the solution. Non-rigid body parts are not seen anymore as imperfect realizations of rigid body parts, but rather as potential computational resources. The applicability of this vision has already been demonstrated for a variety of complex robot control problems. Nevertheless, a theoretical basis for understanding the capabilities and limitations of morphological computation has been missing so far. We present a model for morphological computation with compliant bodies, where a precise mathematical characterization oft he potential computational contribution of a complex physical body is feasible. The theory suggests that complexity and nonlinearity, typically unwanted properties of robots, are desired features in order to provide computational power. We demonstrate that simple generic models of physical bodies,based on mass-spring systems, can be used to implement complex nonlinear operators. By adding a simple readout(which is static and linear) to the morphology, such devices are able to emulate complex mappings of input to output streams in continuous time. Hence, by outsourcing parts of the computation to the physical body, the difficult problem of learning to control a complex body, could be reduced to a simple and perspicuous learning task, which can not get stuck in local minima of an error function.

Coarse graining and scaling in dissipative particle dynamics.

Dissipative particle dynamics (DPD) is now a well-established method for simulating soft matter systems. However, its applicability was recently questioned because some investigations showed an upper coarse-graining limit that would prevent the applicability of the method to the whole mesoscopic range. This article aims to re-establish DPD as a truly mesoscopic method by analyzing the problems reported by other authors and by presenting a scaling scheme that allows one to apply DPD simulations directly to any desired length scale.

Folding stabilizes the evolution of catalysts.

Sequence folding is known to determine the spatial structure and catalytic function of proteins and nucleic acids. We show here that folding also plays a key role in enhancing the evolutionary stability of the intermolecular recognition necessary for the prevalent mode of catalytic action in replication, namely, in trans, one molecule catalyzing the replication of another copy, rather than itself. This points to a novel aspect of why molecular life is structured as it is, in the context of life as it could be: folding allows limited, structurally localized recognition to be strongly sensitive to global sequence changes, facilitating the evolution of cooperative interactions. RNA secondary structure folding, for example is shown to be able to stabilize the evolution of prolonged functional sequences, using only a part of this length extension for intermolecular recognition, beyond the limits of the (cooperative) error threshold. Such folding could facilitate the evolution of polymerases in spatially heterogeneous systems. This facilitation is, in fact, vital because physical limitations prevent complete sequence-dependent discrimination for any significant-size biopolymer substrate. The influence of partial sequence recognition between biopolymer catalysts and complex substrates is investigated within a stochastic, spatially resolved evolutionary model of trans catalysis. We use an analytically tractable nonlinear master equation formulation called PRESS (McCaskill et al., Biol. Chem. 382: 1343-1363), which makes use of an extrapolation of the spatial dynamics down from infinite dimensional space, and compare the results with Monte Carlo simulations.