Remodeling of tissue-engineered bone structures in vivo.

Implant design for bone regeneration is expected to be optimized when implant structures resemble the anatomical situation of the defect site. We tested the validity of this hypothesis by exploring the feasibility of generating different in vitro engineered bone-like structures originating from porous silk fibroin scaffolds decorated with RGD sequences (SF-RGD), seeded with human mesenchymal stem cells (hMSC). Scaffolds with small (106-212 µm), medium (212-300 µm), and large pore diameter ranges (300-425 µm) were seeded with hMSC and subsequently differentiated in vitro into bone-like tissue resembling initial scaffold geometries and featuring bone-like structures. Eight weeks after implantation into calvarial defects in mice, the in vitro engineered bone-like tissues had remodeled into bone featuring different proportions of woven/lamellar bone bridging the defects. Regardless of pore diameter, all implants integrated well, vascularization was advanced, and bone marrow ingrowth had started. Ultimately, in this defect model, the geometry of the in vitro generated tissue-engineered bone structure, trabecular- or plate-like, had no significant impact on the healing of the defect, owing to an efficient remodeling of its structure after implantation.

Effects of chondrogenic and osteogenic regulatory factors on composite constructs grown using human mesenchymal stem cells, silk scaffolds and bioreactors.

Human mesenchymal stem cells (hMSCs) isolated from bone marrow aspirates were cultured on silk scaffolds in rotating bioreactors for three weeks with either chondrogenic or osteogenic medium supplements to engineer cartilage- or bone-like tissue constructs. Osteochondral composites formed from these cartilage and bone constructs were cultured for an additional three weeks in culture medium that was supplemented with chondrogenic factors, supplemented with osteogenic factors or unsupplemented. Progression of cartilage and bone formation and the integration between the two regions were assessed by medical imaging (magnetic resonance imaging and micro-computerized tomography imaging), and by biochemical, histological and mechanical assays. During composite culture (three to six weeks), bone-like tissue formation progressed in all three media to a markedly larger extent than cartilage-like tissue formation. The integration of the constructs was most enhanced in composites cultured in chondrogenic medium. The results suggest that tissue composites with well-mineralized regions and substantially less developed cartilage regions can be generated in vitro by culturing hMSCs on silk scaffolds in bioreactors, that hMSCs have markedly higher capacity for producing engineered bone than engineered cartilage, and that chondrogenic factors play major roles at early stages of bone formation by hMSCs and in the integration of the two tissue constructs into a tissue composite.

Bone and cartilage tissue constructs grown using human bone marrow stromal cells, silk scaffolds and rotating bioreactors.

Human bone marrow contains a population of bone marrow stromal cells (hBMSCs) capable of forming several types of mesenchymal tissues, including bone and cartilage. The present study was designed to test whether large cartilaginous and bone-like tissue constructs can be selectively engineered using the same cell population (hBMSCs), the same scaffold type (porous silk) and same hydrodynamic environment (construct settling in rotating bioreactors), by varying the medium composition (chondrogenic vs. osteogenic differentiation factors). The hBMSCs were harvested, expanded and characterized with respect to their differentiation potential and population distribution. Passage two cells were seeded on scaffolds and cultured for 5 weeks in bioreactors using osteogenic, chondrogenic or control medium. The three media yielded constructs with comparable wet weights and compressive moduli ( approximately 25 kPa). Chondrogenic medium yielded constructs with higher amounts of DNA (1.5-fold) and glycosaminoglycans (GAG, 4-fold) per unit wet weight (ww) than control medium. In contrast, osteogenic medium yielded constructs with higher dry weight (1.6-fold), alkaline phosphatase (AP) activity (8-fold) and calcium content (100-fold) per unit ww than control medium. Chondrogenic medium yielded constructs that were weakly positive for GAG by contrast-enhanced MRI and alcian blue stain, whereas osteogenic medium yielded constructs that were highly mineralized by microCT and von Kossa stain. Engineered bone constructs were large (8mm diameter x 2mm thick disks) and resembled trabecular bone with respect to structure and mineralized tissue volume fraction (12%).

Osteogenesis by human mesenchymal stem cells cultured on silk biomaterials: comparison of adenovirus mediated gene transfer and protein delivery of BMP-2.

Bone tissue engineering, gene therapy based on human mesenchymal stem cells (MSCs) and silk fibroin biomaterials were combined to study the impact of viral transfection on MSC osteogenic performance in vitro. MSCs were transduced with adenovirus containing a human BMP-2 (Ad-BMP-2) gene at clinically reasonable viral concentrations and cultured for 4 weeks. Controls with nontransfected MSCs, but exposed to exogenous BMP-2 concentrations on an analogous time profile as that secreted by the Ad-BMP-2 group, were compared. Both the Ad-BMP-2 MSC group and the exogenous protein BMP-2 group strongly expressed osteopontin and bone sialoprotein. Cells secreted a matrix that underwent mineralization on the silk fibroin scaffolds, forming clusters of osseous material, as determined by micro-computed tomography. The expression of osteogenic marker proteins and alkaline phosphatase was significantly higher in the Ad-BMP-2 MSC group than in the exogenous protein BMP-2 group, and no significant differences in mineralization were observed in two of the three MSC sources tested. The results demonstrate that transfection resulted in higher levels of expression of osteogenic marker genes, no change in proliferation rate and did not impact the capacity of the cells to calcify tissues on these protein scaffolds. These findings suggest additional options to control differentiation where exogenous additions of growth factors or morphogens can be replaced with transfected MSCs.

Porous silk fibroin 3-D scaffolds for delivery of bone morphogenetic protein-2 in vitro and in vivo.

Bone morphogenetic protein-2 (BMP-2) plays a key role in osteogenesis. Biomaterials used for the sustained delivery of BMP-2 in vivo have shown therapeutic benefits. In the present study, BMP-2 was loaded in porous silk fibroin scaffolds derived from silkworm cocoons (2.4 +/- 0.14 microg per scaffold). The release profile of BMP-2 under dynamic culture conditions (spinner flasks) showed that after 1 week in culture 25% of the initial BMP-2 was retained adsorbed to the scaffold; up to 4 weeks no additional BMP-2 was released. BMP-2 induced human bone marrow stromal cells (hMSCs) to undergo osteogenic differentiation when the seeded scaffolds were cultured in medium supplemented with osteogenic stimulants for 4 weeks, based on elevated alkaline phosphatase activity, calcium deposition, and transcript levels for bone sialoprotein, osteopontin, osteocalcin, BMP-2, and cbfa-1. Micro-computed tomography revealed densely deposited mineral at the center of the scaffolds. In contrast, hMSCs cultured in control scaffolds (no BMP-2) exhibited limited osteogenesis. When implanted in critical sized cranial defects in mice, scaffolds loaded with BMP-2 and seeded with hMSCs resulted in significant bone ingrowth. These results were qualitatively similar to scaffolds loaded with BMP-2 but no hMSCs or with BMP-2 and hMSCs but not pregrown into bone-like tissue. Bone-related outcomes were improved when compared with the scaffold controls implanted without BMP-2. These studies illustrate the potential use of slow degrading silk fibroin 3-D scaffolds loaded with BMP-2, in combination with hMSCs, in osteogenesis studies in vitro and in vivo, and provide a new range of material properties for these applications.

Silk implants for the healing of critical size bone defects.

Bone (re)-generation and bone fixation strategies utilize biomaterial implants, which are gradually replaced by autologous tissues. Ideally, these biomaterials should be biodegradable, osteoconductive, and provide mechanical strength and integrity until newly formed host tissues can maintain function. Some protein-based biomaterials such as collagens are promising because of their biological similarities to natural proteins on bone surfaces. However, their use as bone implant materials is largely hampered by poor mechanical properties. In contrast, silks offer distinguishing mechanical properties that are tailorable, along with slow degradability to permit adequate time for remodeling. To assess the suitability of silk-based biomaterials as implants for bone healing, we explored the use of novel porous silk fibroin scaffolds as templates for the engineering of bone tissues starting from human bone marrow derived stem cells cultured under osteogenic conditions for up to 5 weeks. The slowly degrading protein matrix permitted adequate temporal control of hydroxyapatite deposition and resulted in the formation of a trabecular-like bone matrix in bioreactor studies. The organic and inorganic components of the engineered bone tissues resembled those of bone, as shown by gene expression analysis, biochemical assays, and X-ray diffractometry. Implantation of the tissue-engineered bone implants (grown in bioreactors for 5 weeks prior to implantation) into calvarial critical size defects in mice demonstrated the capacity of these systems to induce advanced bone formation within 5 weeks, whereas the implantation of stem cell loaded silk scaffolds, and scaffolds alone resulted in less bone formation. These results demonstrate the feasibility of silk-based implants with engineered bone for the (re-)generation of bone tissues and expand the class of protein-based bone-implant materials with a mechanically stable and durable option.

Engineering bone-like tissue in vitro using human bone marrow stem cells and silk scaffolds.

Porous biodegradable silk scaffolds and human bone marrow derived mesenchymal stem cells (hMSCs) were used to engineer bone-like tissue in vitro. Two different scaffolds with the same microstructure were studied: collagen (to assess the effects of fast degradation) and silk with covalently bound RGD sequences (to assess the effects of enhanced cell attachment and slow degradation). The hMSCs were isolated, expanded in culture, characterized with respect to the expression of surface markers and ability for chondrogenic and osteogenic differentiation, seeded on scaffolds, and cultured for up to 4 weeks. Histological analysis and microcomputer tomography showed the development of up to 1.2-mm-long interconnected and organized bonelike trabeculae with cuboid cells on the silk-RGD scaffolds, features still present but to a lesser extent on silk scaffolds and absent on the collagen scaffolds. The X-ray diffraction pattern of the deposited bone corresponded to hydroxyapatite present in the native bone. Biochemical analysis showed increased mineralization on silk-RGD scaffolds compared with either silk or collagen scaffolds after 4 weeks. Expression of bone sialoprotein, osteopontin, and bone morphogenetic protein 2 was significantly higher for hMSCs cultured in osteogenic than control medium both after 2 and 4 weeks in culture. The results suggest that RGD-silk scaffolds are particularly suitable for autologous bone tissue engineering, presumably because of their stable macroporous structure, tailorable mechanical properties matching those of native bone, and slow degradation.

Bone tissue engineering using human mesenchymal stem cells: effects of scaffold material and medium flow.

We report studies of bone tissue engineering using human mesenchymal stem cells (MSCs), a protein substrate (film or scaffold; fast degrading unmodified collagen, or slowly degrading cross-linked collagen and silk), and a bioreactor (static culture, spinner flask, or perfused cartridge). MSCs were isolated from human bone marrow, characterized for the expression of cell surface markers and the ability to undergo chondrogenesis and osteogenesis in vitro, and cultured for 5 weeks. MSCs were positive for CD105/endoglin, and had a potential for chondrogenic and osteogenic differentiation. In static culture, calcium deposition was similar for MSC grown on collagen scaffolds and films. Under medium flow, MSC on collagen scaffolds deposited more calcium and had a higher alcaline phosphatase (AP) activity than MSC on collagen films. The amounts of DNA were markedly higher in constructs based on slowly degrading (modified collagen and silk) scaffolds than on fast degrading (unmodified collagen) scaffolds. In spinner flasks, medium flow around constructs resulted in the formation of bone rods within the peripheral region, that were interconnected and perpendicular to the construct surface, whereas in perfused constructs, individual bone rods oriented in the direction of fluid flow formed throughout the construct volume. These results suggest that osteogenesis in cultured MSC can be modulated by scaffold properties and flow environment.