Boron-incorporated nanosized SUZ-4 zeolite for DME carbonylation.

Boron-incorporated nanosized HB-SUZ-4 showcased a noteworthy 24% boost in dimethyl ether carbonylation, with an elevation in methyl acetate selectivity from 91.8% to 96.0%. The improved performance is attributed to shortened diffusion lengths along the 8-member ring channels, decreased Brønsted acidity in the 10-member ring channels, and Lewis acid sites stabilizing CO.

Surface photovoltage microscopy for mapping charge separation on photocatalyst particles.

Solar-driven photocatalytic reactions offer a promising route to clean and sustainable energy, and the spatial separation of photogenerated charges on the photocatalyst surface is the key to determining photocatalytic efficiency. However, probing the charge-separation properties of photocatalysts is a formidable challenge because of the spatially heterogeneous microstructures, complicated charge-separation mechanisms and lack of sensitivity for detecting the low density of separated photogenerated charges. Recently, we developed surface photovoltage microscopy (SPVM) with high spatial and energy resolution that enables the direct mapping of surface-charge distributions and quantitative assessment of the charge-separation properties of photocatalysts at the nanoscale, potentially providing unprecedented insights into photocatalytic charge-separation processes. Here, this protocol presents detailed procedures that enable researchers to construct the SPVM instruments by integrating Kelvin probe force microscopy with an illumination system and the modulated surface photovoltage (SPV) approach. It then describes in detail how to perform SPVM measurements on actual photocatalyst particles, including sample preparation, tuning of the microscope, adjustment of the illuminated light path, acquisition of SPVM images and measurements of spatially resolved modulated SPV signals. Moreover, the protocol also includes sophisticated data analysis that can guide non-experts in understanding the microscopic charge-separation mechanisms. The measurements are ordinarily performed on photocatalysts with a conducting substrate in gases or vacuum and can be completed in 15 h.

New Alkalescent Electrolyte Chemistry for Zinc-Ferricyanide Flow Battery.

Alkaline zinc-ferricyanide flow batteries are efficiency and economical as energy storage solutions. However, they suffer from low energy density and short calendar life. The strongly alkaline conditions (3 mol L-1 OH-) reduce the solubility of ferri/ferro-cyanide (normally only 0.4 mol L-1 at 25 oC) and induce the formation of zinc dendrites at the anode. Here, we report a new zinc-ferricyanide flow battery based on a mild alkalescent (pH 12) electrolyte. Using a chelating agent to rearrange ferri/ferro-cyanide ion-solvent interactions and improve salt dissociation, we increased the solubility of ferri/ferro-cyanide to 1.7 mol L-1 and prevented zinc dendrites. Our battery has an energy density of ~74 Wh L-1 at 60 oC and remains stable for 1800 cycles (1800 hours) at 0 oC and for >1400 cycles (2300 hours) at 25 oC. An alkalescent zinc-ferricyanide cell stack built using this alkalescent electrolyte stably delivers 608 W of power for ~40 days.

Bio-inspired Two-dimensional Nanofluidic Ionic Transistor for Neuromorphic Signal Processing.

Voltage-gated ion channels prevalent in neurons play important roles in generating action potential and information transmission by responding to transmembrane potential. Fabricating bio-inspired ionic transistors with ions as charge carriers will be crucial for realizing neuro-inspired devices and brain-liking computing. Here, we reported a two-dimensional nanofluidic ionic transistor based on a MXene membrane with sub-1 nm interlayer channels. By applying a gating voltage on the MXene nanofluidic, a transmembrane potential will be generated to active the ionic transistor, which is similar to the transmembrane potential of neuron cells and can be effectively regulated by changing membrane parameters, e.g., thickness, composition, and interlayer spacing. For the symmetric MXene nanofluidic, a high on/off ratio of ~2000 can be achieved by forming an ionic depletion or accumulation zone, contingent on the sign of the gating potential. An asymmetric PET/MXene-composited nanofluidic transitioned the ionic transistor from ambipolar to unipolar, resulting in a more sensitive gate voltage characteristic with a low subthreshold swing of 560 mV/decade. Furthermore, ionic logic gate circuits, including the "NOT", "NAND", and "NOR" gate, were implemented for neuromorphic signal processing successfully, which provides a promising pathway towards highly parallel, low energy consumption, and ion-based brain-like computing.

Liquid metal-embraced photoactive films for artificial photosynthesis.

The practical applications of solar-driven water splitting pivot on significant advances that enable scalable production of robust photoactive films. Here, we propose a proof-of-concept for fabricating robust photoactive films by a particle-implanting technique (PiP) which embeds semiconductor photoabsorbers in the liquid metal. The strong semiconductor/metal interaction enables resulting films efficient collection of photogenerated charges and superior photoactivity. A photoanode of liquid-metal embraced BiVO4 can stably operate over 120 h and retain ~ 70% of activity when scaled from 1 to 64 cm2. Furthermore, a Z-scheme photocatalyst film of liquid-metal embraced BiVO4 and Rh-doped SrTiO3 particles can drive overall water splitting under visible light, delivering an activity 2.9 times higher than that of the control film with gold support and a 110 h stability. These results demonstrate the advantages of the PiP technique in constructing robust and efficient photoactive films for artificial photosynthesis.

Stacking textured films on lattice-mismatched transparent conducting oxides via matched Voronoi cell of oxygen sublattice.

Transparent conducting oxides are a critical component in modern (opto)electronic devices and solar energy conversion systems, and forming textured functional films on them is highly desirable for property manipulation and performance optimization. However, technologically important materials show varied crystal structures, making it difficult to establish coherent interfaces and consequently the oriented growth of these materials on transparent conducting oxides. Here, taking lattice-mismatched hexagonal α-Fe2O3 and tetragonal fluorine-doped tin oxide as the example, atomic-level investigations reveal that a coherent ordered structure forms at their interface, and via an oxygen-mediated dimensional and chemical-matching manner, that is, matched Voronoi cells of oxygen sublattices, [110]-oriented α-Fe2O3 films develop on fluorine-doped tin oxide. Further measurements of charge transport characteristics and photoelectronic effects highlight the importance and advantages of coherent interfaces and well-defined orientation in textured α-Fe2O3 films. Textured growth of lattice-mismatched oxides, including spinel Co3O4, fluorite CeO2, perovskite BiFeO3 and even halide perovskite Cs2AgBiBr6, on fluorine-doped tin oxide is also achieved, offering new opportunities to develop high-performance transparent-conducting-oxide-supported devices.

Fully Conjugated 2D sp2 Carbon-Linked Covalent Organic Frameworks for Photocatalytic Overall Water Splitting.

Covalent organic frameworks (COFs) hold great promise for solar-driven hydrogen production. However, metal-free COFs for photocatalytic overall water splitting remain elusive, primarily due to challenges in simultaneously regulating their band structures and catalytic sites to enable concurrent half-reactions. Herein, two types of π-conjugated COFs containing the same donor-acceptor structure are constructed via Knoevenagel condensation and Schiff base reaction to afford cyanovinylene- and imine-bridged COFs, respectively. The difference in the linkage leads to a remarkable difference in their photocatalytic activity toward water splitting. The 2D sp2 carbon-linked COF exhibits notable activity for photocatalytic overall water splitting, which can reach an apparent quantum efficiency of 2.53% at 420 nm. In contrast, the 2D imine-linked COF cannot catalyze the overall water-splitting reaction. Mechanistic investigations reveal that the cyanovinylene linkage is essential in modulating the band structure and promoting charge separation in COFs, thereby enabling overall water splitting. Moreover, it is further shown that crystallinity substantially impacts the photocatalytic performance of COFs. This study represents the first successful example of developing metal-free COFs with high crystallinity for photocatalytic overall water splitting.

Determining the Transformation Kinetics of Water Oxidation Intermediates on Hematite Photoanode.

The oxygen evolution reaction (OER) from water is a sequential oxidation reaction process, involved in transformation of multiple reaction intermediates. For photo(electro)catalytic OER, revealing the intermediates transformation kinetics is quite challenging due to its coupling with photogenerated charge dynamics. Herein, we specifically study the transformation kinetics of the OER intermediates in rationally thin hematite photoanodes through increasing the ratio between surface intermediates and photogenerated charges in bulk. We directly identify the formation and consumption kinetics of one-hole OER intermediate (FeIV═O) in photoelectrochemical water oxidation using operando transient absorption (TA) spectroscopy. The microsecond formation kinetics of the FeIV═O species are sensitively changed by the excitation mode of Fe2O3. The subsecond consumption kinetics are closely dependent on surface FeIV═O species density, demonstrating that the cooperation of FeIV═O intermediates is the key to accelerating water oxidation kinetics on the Fe2O3 surface. This work provides insight into understanding and controlling water oxidation reaction kinetics on Fe2O3 surface.

Visualizing the role of applied voltage in non-metal electrocatalysts.

Understanding how applied voltage drives the electrocatalytic reaction at the nanoscale is a fundamental scientific problem, particularly in non-metallic electrocatalysts, due to their low intrinsic carrier concentration. Herein, using monolayer molybdenum disulfide (MoS2) as a model system of non-metallic catalyst, the potential drops across the basal plane of MoS2 (ΔVsem) and the electric double layer (ΔVedl) are decoupled quantitatively as a function of applied voltage through in-situ surface potential microscopy. We visualize the evolution of the band structure under liquid conditions and clarify the process of EF keeping moving deep into Ec, revealing the formation process of the electrolyte gating effect. Additionally, electron transfer (ET) imaging reveals that the basal plane exhibits high ET activity, consistent with the results of surface potential measurements. The potential-dependent behavior of kf and ns in the ET reaction are further decoupled based on the measurements of ΔVsem and ΔVedl. Comparing the ET and hydrogen evolution reaction imaging results suggests that the low electrocatalytic activity of the basal plane is mainly due to the absence of active sites, rather than its electron transfer ability. This study fills an experimental gap in exploring driving forces for electrocatalysis at the nanoscale and addresses the long-standing issue of the inability to decouple charge transfer from catalytic processes.

A Surfactant-Free and General Strategy for the Synthesis of Bimetallic Core-Shell Nanocrystals on Reduced Graphene Oxide through Targeted Photodeposition.

Tunable physicochemical properties of bimetallic core-shell heterostructured nanocrystals (HNCs) have shown enormous potential in electrocatalytic reactions. In many cases, HNCs are required to load on supports to inhibit catalyst aggregation. However, the introduction of supports during the process of growing core-shell HNCs makes the synthesis much more complicated and difficult to control precisely. Herein, we reported a universal photochemical synthetic strategy for the controlled synthesis of well-defined surfactant-free core-shell metal HNCs on a reduced graphene oxide (rGO) support, which was assisted by the fine control of photogenerated electrons directly transferring to the targeted metal seeds via rGO and the precisely tuned adsorption capacity of the added second metal precursors. The surface photovoltage microscopy (SPVM) platform proved that photogenerated electrons flowed through rGO to Pd particles under illumination. We have successfully synthesized 24 different core-shell metal HNCs, i.,e., MA@MB (MA = Pd, Au, and Pt; MB = Au, Ag, Pt, Pd, Ir, Ru, Rh, Ni and Cu), on the rGO supports. The as-prepared Pd@Cu core-shell HNCs showed outstanding performance in the electrocatalytic reduction of CO2 to CH4. This work could shed light on the controlled synthesis of more functional bimetallic nanostructured materials on diverse supports for various applications.

Selective Exposure of Robust Perovskite Layer of Aurivillius-Type Compounds for Stable Photocatalytic Overall Water Splitting.

Aurivillius-type compounds ((Bi2 O2 )2+ (An -1 Bn O3 n +1 )2- ) with alternately stacked layers of bismuth oxide (Bi2 O2 )2+ and perovskite (An -1 Bn O3 n +1 )2- are promising photocatalysts for overall water splitting due to their suitable band structures and adjustable layered characteristics. However, the self-reduction of Bi3+ at the top (Bi2 O2 )2+ layers induced by photogenerated electrons during photocatalytic processes causes inactivation of the compounds as photocatalysts. Here, using Bi3 TiNbO9 as a model photocatalyst, its surface termination is modulated by acid etching, which well suppresses the self-corrosion phenomenon. A combination of comprehensive experimental investigations together with theoretical calculations reveals the transition of the material surface from the self-reduction-sensitive (Bi2 O2 )2+ layer to the robust (BiTiNbO7 )2- perovskite layer, enabling effective electron transfer through surface trapping and effective hole transfer through surface electric field, and also efficient transfer of the electrons to the cocatalyst for greatly enhanced photocatalytic overall water splitting. Moreover, this facile modification strategy can be readily extended to other Aurivillius compounds (e.g., SrBi2 Nb2 O9 , Bi4 Ti3 O12 , and SrBi4 Ti4 O15 ) and therefore justify its usefulness in rationally tailoring surface structures of layered photocatalysts for high photocatalytic overall water-splitting activity and stability.

Observation of Charge Separation Enhancement in Plasmonic Photocatalysts under Coupling Conditions.

Surface plasmon resonance-induced charge separation plays key roles in plasmon-related applications, especially in photocatalysis and photovoltaics. Plasmon coupling nanostructures exhibit extraordinary behaviors in hybrid states, phonon scattering, and ultrafast plasmon dephasing, but plasmon-induced charge separation in these materials remains unknown. Here, we design Schottky-free Au nanoparticle (NP)/NiO/Au nanoparticles-on-a-mirror plasmonic photocatalysts to support plasmon-induced interfacial hole transfer, evidenced by surface photovoltage microscopy at the single-particle level. In particular, we observe a nonlinear increase in charge density and photocatalytic performance with an increase in excitation intensity in plasmonic photocatalysts containing hot spots as a result of varying the geometry. Such charge separation increased the internal quantum efficiency by 14 times at 600 nm in catalytic reactions as compared to that of the Au NP/NiO without a coupling effect. These observations provide an improved understanding of charge transfer management and utilization by geometric engineering and interface electronic structure for plasmonic photocatalysis.

Modulating Oxygen Vacancies in Lead Chromate for Photoelectrocatalytic Water Splitting.

Although modulating oxygen vacancies in semiconductors has attracted broad interest in photocatalysis and photoelectrocatalysis, identifying the intrinsic roles of oxygen vacancies on photoelectrocatalytic properties is often elusive. In this work, the oxygen vacancies in a typical semiconductor lead chromate (PbCrO4 ) are regulated via controlling the oxygen chemical potentials of O-poor and O-rich post-annealing atmospheres. Oxygen vacancies identified in PbCrO4 can introduce electronically shallow energy levels and deep energy levels owing to the symmetry difference of oxygen atoms in the structure. A higher population of deep energy levels created under O-poor atmosphere induces the formation of more surface trapped states, resulting in a higher photovoltage for charge separation. Meanwhile, the existence of surface trapped states can significantly improve the charge injection efficiency of the PbCrO4 photoanode and enhance the water oxidation activity. By modulating oxygen vacancies in the PbCrO4 photoanode, a photocurrent density of 3.43 mA cm-2 at 1.23 V vs reversible hydrogen electrode (RHE) under simulated AM1.5G is acheived. Further passivation of surface trapped states and introducing the water oxidation cocatalyst CoPi lead to a record applied bias photon-to-current efficiency (ABPE) of 1.12%. This work provides a guide to understand the mechanism of oxygen vacancies in oxide-based semiconductor photocatalysis and photoelectrocatalysis.

Linking the Photoinduced Surface Potential Difference to Interfacial Charge Transfer in Photoelectrocatalytic Water Oxidation.

Charge transfer at the semiconductor/solution interface is fundamental to photoelectrocatalytic water splitting. Although insights into charge transfer in the electrocatalytic process can be gained from the phenomenological Butler-Volmer theory, there is limited understanding of interfacial charge transfer in the photoelectrocatalytic process, which involves intricate effects of light, bias, and catalysis. Here, using operando surface potential measurements, we decouple the charge transfer and surface reaction processes and find that the surface reaction enhances the photovoltage via a reaction-related photoinduced charge transfer regime as demonstrated on a SrTiO3 photoanode. We show that the reaction-related charge transfer induces a change in the surface potential that is linearly correlated to the interfacial charge transfer rate of water oxidation. The linear behavior is independent of the applied bias and light intensity and reveals a general rule for interfacial transfer of photogenerated minority carriers. We anticipate the linear rule to be a phenomenological theory for describing interfacial charge transfer in photoelectrocatalysis.

Boosting Photocatalytic Water Oxidation on Photocatalysts with Ferroelectric Single Domains.

Ferroelectric materials are considered as promising photocatalysts due to their efficient charge separation via a polarization-induced built-in electric field. However, the polydomain structures hinder spatial charge separation and transfer due to the cancellation of polarization vectors in the domains. In this work, taking BiFeO3 (BFO) as a prototype, single-domain BFO nanosheets with visible-light absorption are prepared, as evident by piezoresponse force microscopy (PFM), spatially resolved surface photovoltage spectroscopy (SRSPS), and photodeposition experiments. The single-domain BFO nanosheets show nine times activity in photocatalytic water oxidation reaction under visible-light irradiation, compared with that of the polydomain BFO particles. With the asymmetric driving force for charge separation in a single domain, selective deposition of cocatalysts further enhances the photocatalytic activity of single-domain ferroelectric BFO nanosheets. These results demonstrate the role of the single-domain structure in constructing the driving force of charge separation in ferroelectric photocatalysts. The fabrication of single-domain structures in ferroelectric photocatalysts to achieve enhanced photocatalytic activity offers a path to efficiently utilize the photogenerated charges in solar energy conversion.

Bulk Photovoltage Effect in Ferroelectric BaTiO3.

Due to the unusual charge separation mechanism and anomalous photovoltaic effects, the bulk photovoltage effect in ferroelectric semiconductors has attracted a great deal of attention in solar energy conversion, especially in attempts to utilize nonthermalized carriers. Among the various mechanisms that have been proposed for interpreting the photovoltaic effect, a shift mechanism was derived from quantum phenomena, which have been modeled and studied for many years. However, the concurrent shift and ballistic mechanism make investigating the ferroelectric bulk photovoltage effect complex and challenging. Here, taking a tetragonal ferroelectric BaTiO3 single crystal as a prototype, we report an approach for distinguishing the shift and ballistic mechanism-induced surface photovoltage. The results indicate different effects on the charge separation of the ballistic mechanism and shift mechanisms, as evidenced by surface photovoltage measurement. Interestingly, the shift and ballistic mechanisms afford charge separation in two opposite directions but on the same order of magnitude under monochromatic superband illumination. Our results provide facile and efficient methods for clarifying the shift and ballistic mechanisms in ferroelectrics.

Spatiotemporal imaging of charge transfer in photocatalyst particles.

The water-splitting reaction using photocatalyst particles is a promising route for solar fuel production1-4. Photo-induced charge transfer from a photocatalyst to catalytic surface sites is key in ensuring photocatalytic efficiency5; however, it is challenging to understand this process, which spans a wide spatiotemporal range from nanometres to micrometres and from femtoseconds to seconds6-8. Although the steady-state charge distribution on single photocatalyst particles has been mapped by microscopic techniques9-11, and the charge transfer dynamics in photocatalyst aggregations have been revealed by time-resolved spectroscopy12,13, spatiotemporally evolving charge transfer processes in single photocatalyst particles cannot be tracked, and their exact mechanism is unknown. Here we perform spatiotemporally resolved surface photovoltage measurements on cuprous oxide photocatalyst particles to map holistic charge transfer processes on the femtosecond to second timescale at the single-particle level. We find that photogenerated electrons are transferred to the catalytic surface quasi-ballistically through inter-facet hot electron transfer on a subpicosecond timescale, whereas photogenerated holes are transferred to a spatially separated surface and stabilized through selective trapping on a microsecond timescale. We demonstrate that these ultrafast-hot-electron-transfer and anisotropic-trapping regimes, which challenge the classical perception of a drift-diffusion model, contribute to the efficient charge separation in photocatalysis and improve photocatalytic performance. We anticipate that our findings will be used to illustrate the universality of other photoelectronic devices and facilitate the rational design of photocatalysts.

Multi-Function of the Ni Interlayer in the Design of a BiVO4-Based Photoanode for Photoelectrochemical Water Splitting.

BiVO4 with an appropriate band structure is considered to be an ideal candidate for photoanodes. However, slow water oxidation kinetics and low charge separation efficiency seriously restrict its application. To address these issues, an NF/N/BVO photoanode with a hierarchical network structure was successfully constructed by direct-current magnetron sputtering of Ni followed by electrochemical deposition of nickel-iron layered double hydroxide (NiFe-LDH) on BiVO4. A photocurrent density of 4.50 mA/cm2 was obtained for NF/N/BVO, which was 2.4 times that for pristine BiVO4. The introduction of the Ni layer contributed to the following growth of NiFe-LDH nanosheets with larger size, which acted as active sites and speeded up water oxidation kinetics. Furthermore, surface photovoltage microscopy revealed that Ni and NiFe-LDH acted as the electron collector and hole reservoir, respectively. The co-existence of the two components constituted a highly efficient surface charge separation structure, which was one of the important issues for the excellent water oxidation activity.

Bipolar charge collecting structure enables overall water splitting on ferroelectric photocatalysts.

Ferroelectrics are considered excellent photocatalytic candidates for solar fuel production because of the unidirectional charge separation and above-gap photovoltage. Nevertheless, the performance of ferroelectric photocatalysts is often moderate. A few studies showed that these types of photocatalysts could achieve overall water splitting. This paper proposes an approach to fabricating interfacial charge-collecting nanostructures on positive and negative domains of ferroelectric, enabling water splitting in ferroelectric photocatalysts. The present study observes efficient accumulations of photogenerated electrons and holes within their thermalization length (~50 nm) around Au nanoparticles located in the positive and negative domains of a BaTiO3 single crystal. Photocatalytic overall water splitting is observed on a ferroelectric BaTiO3 single crystal after assembling oxidation and reduction cocatalysts on the positively and negatively charged Au nanoparticles, respectively. The fabrication of bipolar charge-collecting structures on ferroelectrics to achieve overall water splitting offers a way to utilize the energetic photogenerated charges in solar energy conversion.

Enhancement of Plasmon-Induced Photoelectrocatalytic Water Oxidation over Au/TiO2 with Lithium Intercalation.

Plasmon-induced chemical reaction is an emerging field but its development faces huge challenges because of low quantum efficiency. Herein, we report that the solar energy conversion efficiency of Au/TiO2 in plasmon-induced water oxidation is greatly enhanced by intercalating Li+ into TiO2 . An incident photon-to-current efficiency as high as 2.0 %@520 nm is achieved by Au/Li0.2 TiO2 in photoelectrocatalytic water oxidation, realizing a 33-fold enhancement in photocurrent density compared with Au/TiO2 . The superior photoelectrocatalytic performance is mainly ascribed to the enhanced electric conductivity and higher catalytic activity of Li0.2 TiO2 . Furthermore, the ultrafast transient absorption spectroscopy suggests that lithium intercalation into TiO2 could change the dynamics of hot electron relaxation in Au nanoparticles. This work demonstrates that intercalation of alkaline ions into semiconductors can promote the charge separation efficiency of the plasmonic effect of Au/TiO2 .