Effect of COVID-19 on the characteristics and outcome of patients who have otitis media with effusion: a case-control study.

BACKGROUND: Few studies have examined the otologic symptoms of Coronavirus disease 2019 (COVID-19). The objective of this study was to identify the effect of COVID-19 on the characteristics and outcomes of patients who have otitis media with effusion (OME). METHODS: This case-control study compared the characteristics and outcomes of OME patients who did or did not have COVID-19. A total of 65 patients with previous COVID-19 and 40 patients who did not have COVID-19 (controls) were enrolled from October 1, 2022 to January 31, 2023 at a single institution in China. Demographics, medical histories, morbidities, hearing test results, treatments, and outcomes of the two groups were compared. RESULTS: The COVID-19 group had significantly better outcomes from OME than the control group, with higher rates of complete resolution (64.6% vs. 30%) and improvement (30.8% vs. 17.5%), and a lower rate of persistent OME (4.6% vs. 52.5%). Previous COVID-19 was independently associated with a more favorable OME outcome in three multivariate logistic regression models. The COVID-19 group also had a greater improvement in hearing threshold based on air-bone gap measurements. CONCLUSION: The outcomes of OME patients who had previous COVID-19 were generally good, in that most patients responded well to treatment and achieved complete resolution or improvement within one month.

Functional and Genetic Analyses Unveil the Implication of CDC27 in Hemifacial Microsomia.

Hemifacial microsomia (HFM) is a rare congenital genetic syndrome primarily affecting the first and second pharyngeal arches, leading to defects in the mandible, external ear, and middle ear. The pathogenic genes remain largely unidentified. Whole-exome sequencing (WES) was conducted on 12 HFM probands and their unaffected biological parents. Predictive structural analysis of the target gene was conducted using PSIPRED (v3.3) and SWISS-MODEL, while STRING facilitated protein-to-protein interaction predictions. CRISPR/Cas9 was applied for gene knockout in zebrafish. In situ hybridization (ISH) was employed to examine the spatiotemporal expression of the target gene and neural crest cell (NCC) markers. Immunofluorescence with PH3 and TUNEL assays were used to assess cell proliferation and apoptosis. RNA sequencing was performed on mutant and control embryos, with rescue experiments involving target mRNA injections and specific gene knockouts. CDC27 was identified as a novel candidate gene for HFM, with four nonsynonymous de novo variants detected in three unrelated probands. Structural predictions indicated significant alterations in the secondary and tertiary structures of CDC27. cdc27 knockout in zebrafish resulted in craniofacial malformation, spine deformity, and cardiac edema, mirroring typical HFM phenotypes. Abnormalities in somatic cell apoptosis, reduced NCC proliferation in pharyngeal arches, and chondrocyte differentiation issues were observed in cdc27-/- mutants. cdc27 mRNA injections and cdkn1a or tp53 knockout significantly rescued pharyngeal arch cartilage dysplasia, while sox9a mRNA administration partially restored the defective phenotypes. Our findings suggest a functional link between CDC27 and HFM, primarily through the inhibition of CNCC proliferation and disruption of pharyngeal chondrocyte differentiation.

Injectable thermo-sensitive hydrogel enhances anti-tumor potency of engineered Lactococcus lactis by activating dendritic cells and effective memory T cells.

Engineered bacteria have shown great potential in cancer immunotherapy by dynamically releasing therapeutic payloads and inducing sustained antitumor immune response with the crosstalk of immune cells. In previous studies, FOLactis was designed, which could secret an encoded fusion protein of Fms-related tyrosine kinase 3 ligand and co-stimulator OX40 ligand, leading to remarkable tumor suppression and exerting an abscopal effect by intratumoral injection. However, it is difficult for intratumoral administration of FOLactis in solid tumors with firm texture or high internal pressure. For patients without lesions such as abdominal metastatic tumors and orthotopic gastric tumors, intratumoral injection is not feasible and peritumoral maybe a better choice. Herein, an engineered bacteria delivery system is constructed based on in situ temperature-sensitive poloxamer 407 hydrogels. Peritumoral injection of FOLactis/P407 results in a 5-fold increase in the proportion of activated DC cells and a more than 2-fold increase in the proportion of effective memory T cells (TEM), playing the role of artificial lymph island. Besides, administration of FOLactis/P407 significantly inhibits the growth of abdominal metastatic tumors and orthotopic gastric tumors, resulting in an extended survival time. Therefore, these findings demonstrate the delivery approach of engineered bacteria based on in situ hydrogel will promote the efficacy and universality of therapeutics.

Metastable Grain Boundaries: The Roles of Structural and Chemical Disorders in Their Energetics, Non-Equilibrium Kinetic Evolution, and Mechanical Behaviors.

Complex environments in advanced manufacturing usually involve ultrafast laser or ion irradiation which leads to rapid heating and cooling and drives grain boundaries (GBs) to non-equilibrium states, featuring distinct energetics and kinetic behaviors compared to conventional equilibrium or near-equilibrium GBs. In this topical review, we provide an overview of both recent experimental and computational studies on metastable GBs, i.e. their energetics, kinetic behaviors, and mechanical properties. In contrast to GBs at thermodynamic equilibrium, the inherent structure energy of metastable GBs exhibits a spectrum instead of single value for a particular misorientation, due to the existence of microstructural and chemical disorder. The potential energy landscape governs the energetic and kinetic behaviors of metastable GBs, including the ageing/rejuvenating mechanism and activation barrier distributions. The unique energetics and structural disorder of metastable GBs lead to unique mechanical properties and tunability of interface-rich nanocrystalline materials. We also discuss that, in addition to structural disorder, chemical complexity in multi-components alloys could also drive the GBs away from their ground states and, subsequently, significantly impact on the GBs-mediated deformation. And under some extreme conditions such as irradiation, structural disorders and chemical complexity may simultaneously present at interfaces, further enriching of metastability of GBs and their physical and mechanical behaviors. Finally, we discuss the machine learning techniques, which have been increasingly employed to predict and understand the complex behaviors of metastable GBs in recent years. We highlight the potential of data-driven approaches to revolutionize the study of disorder systems by efficiently extracting the relationship between structural features and material properties. We hope this topical review paper could shed light and stimulate the development of new GBs engineering strategies that allow more flexibility and tunability for the design of nano-structured materials.

Quality Characteristics and Storage Stability of Frying Steak Utilizing Wax-Based Korean Pine Seed Oil.

To investigate the disparities in product quality and storage stability between wax-based Korean pine seed oil gel and butter when used for frying steak, a comparative analysis was conducted on cooking loss, color, texture characteristics, sensory evaluation, and volatile flavor substances using headspace solid phase microextraction combined with GM-MS. Furthermore, the storage stability was assessed. The findings revealed that the cooking loss rate of steaks significantly increased with doneness, with butter steak exhibiting a significantly higher loss rate compared to the three oil gel steaks. Hardness, chewiness, and adhesiveness greatly increased as doneness progressed; however, cohesiveness, elasticity, and resilience showed minimal variation. The L* value and b* value of steaks initially increased before stabilizing with increasing doneness levels while the a* value first rose before gradually declining. Medium rare steak received the highest sensory score among all categories tested and 69 volatile flavor compounds were detected. Multivariate data analysis indicated similarities in volatile compounds between butter steak and BW (wax-based Korean pine seed oil gel) steak groups. Additionally, during storage at 4 °C temperature conditions pH level retention water content TVB-N (total volatile basic nitrogen), TBARS (thiobarbituric acid reactive substances) were evaluated to determine advantages or disadvantages within each group: Beeswax (BW) > Carnauba wax (CW) > Rice bran wax (RBW) > butter based on these parameters' values. It can be concluded that utilizing wax-based Korean pine seed oil gel for frying steaks not only effectively retains significant amounts of unsaturated fatty acids but also preserves steak quality while extending shelf life-a healthier cooking method resulting in reduced oil absorption.

Fast and high-precision tracking technology for image-based closed-loop cascaded control system with a Risley prism and fast steering mirror.

The Risley prism's compact structure, dynamic responsiveness, and high tracking accuracy make it ideal for photoelectric image tracking. To realize fast and high-precision tracking of the target, we propose an image-based closed-loop tracking cascade control (IBCLTCR-F) system using a single image detector that integrates the Risley prism and fast steering mirror (FSM). Firstly, We propose a cascade control input-decoupling method (CCIDM) for the IBCLTCR-F system to solve the complex problem of coarse-fine control input decoupling in traditional single detector cascaded control systems. Moreover, the CCIDM method ensures that the FSM deflection angle is small and does not exceed its range during the fine tracking process, by using the Risley prism to compensate for the FSM deflection angle. Next, we design the image-based closed-loop tracking controllers of the Risley prism system and FSM system and analyze the stability of the IBCLTCR-F system. Finally, we track static and moving targets through experiments. The experimental results verify the feasibility of the IBCLTCR-F system, the effectiveness of the decoupling method, and the fast and high-precision tracking of the targets.

Petersen's hernia after gastric cancer surgery: Unravelling clinical characteristics and optimal management approaches.

INTRODUCTION: Petersen's hernia is a rare and serious complication that can occur after radical gastrectomy and digestive tract reconstruction for gastric cancer. This article summarises the symptoms, diagnosis and treatment of Petersen's hernia after surgery for gastric cancer. PATIENTS AND METHODS: A retrospective analysis was conducted on 11 male patients who were diagnosed with Petersen's hernia and underwent surgical treatment at our hospital from January 2020 to December 2022. Their clinical manifestations, perioperative conditions and follow-up after treatment were collected. RESULTS: The median age was 58.5 years (range: 45-73), and the median time since gastrectomy was 24 months (range: 4-125). Open distal gastrectomy (45.5%) and open total gastrectomy (27.3%) were the most common procedures. Roux-en-Y (81.8%) was the predominant anastomosis method. All patients underwent emergency surgery within a median time of 30 h (range: 4-45). Intestine necrosis occurred in 36.4% of cases, with a perioperative death rate of 27.3%. CONCLUSION: Petersen's hernia after gastric cancer surgery can quickly lead to necrotising intestinal obstruction and poor prognosis. Enhanced abdominal computed tomography should be performed as soon as possible, and early exploratory laparotomy should be done to avoid intestinal necrosis. Routine closure of the mesenteric defect after gastric cancer resection can prevent the occurrence of Petersen's hernia. This article highlights the need for increased awareness and preventive measures to minimise the occurrence of Petersen's hernia in gastric cancer patients. It emphasises the importance of early detection and appropriate management strategies for improved patient outcomes.

Powerful and accurate detection of temporal gene expression patterns from multi-sample multi-stage single-cell transcriptomics data with TDEseq.

We present a non-parametric statistical method called TDEseq that takes full advantage of smoothing splines basis functions to account for the dependence of multiple time points in scRNA-seq studies, and uses hierarchical structure linear additive mixed models to model the correlated cells within an individual. As a result, TDEseq demonstrates powerful performance in identifying four potential temporal expression patterns within a specific cell type. Extensive simulation studies and the analysis of four published scRNA-seq datasets show that TDEseq can produce well-calibrated p-values and up to 20% power gain over the existing methods for detecting temporal gene expression patterns.

Anti-fogging/dry-dust transparent superhydrophobic surfaces based on liquid-like molecule brush modified nanofiber cluster structures.

Transparent protective coatings capable of preventing fog and dust accumulation have broad application prospect in photovoltaic systems, optical devices and consumer electronics. Although a number of superhydrophobic coatings have been developed for self-cleaning purpose over the past three decades, there is still a lack of surfaces that can simultaneously possess high transparency, remarkable superhydrophobicity, and excellent fog and dust resistance. In this study, we have prepared surfaces featuring sub-wavelength nanofiber cluster structures through a facile plasma etching method, and further modified the surface with liquid-like perfluoropolyether (PFPE) brushes. The prepared PFPE modified nanofibrous surface (PFPE-NS) exhibits superior optical transparency (transmittance 90.4 % ± 0.7 %) and water repellency, with a water contact angle as high as 171.0° ± 0.6° and sliding angle down to 0.5° ± 0.1° (5 µL). More importantly, benefitted from the nanofiber cluster structures and the slippery liquid-like surface chemistry, the adhesion and accumulation of fog droplets and dust particles on PFPE-NS is greatly inhibited. As a consequence, PFPE-NS can keep excellent optical clearness after 2 h fogging test and maintain an average transmittance above 87 % after 24 h dusting test. Our study provides a promising strategy through constructing liquid-like nanofibrous coating for optical protection that could be applicable in practical rainy, foggy, and dusty environments.

Engineered lactococcus lactis intrapleural therapy promotes regression of malignant pleural effusion by enhancing antitumor immunity.

Intrapleural immunotherapies have emerged as a prominent field in treating malignant pleural effusion (MPE). Among these, bacteria-based intrapleural therapy has exerted an anti-MPE effect by immuno-stimulating or cytotoxic properties. We previously engineered a probiotic Lactococcus lactis (FOLactis) expressing a fusion protein of Fms-like tyrosine kinase 3 and co-stimulator OX40 ligands. FOLactis activates tumor antigen-specific immune responses and displays systemic antitumor efficacy via intratumoral delivery. However, no available lesions exist in the pleural cavity of patients with MPE for intratumoral administration. Therefore, we further optimize FOLactis to treat MPE through intrapleural injection. Intrapleural administration of FOLactis (I-Pl FOLactis) not only distinctly suppresses MPE and pleural tumor nodules, but also significantly extends noticeable survival in MPE-bearing murine models. The proportion of CD103+ dendritic cells (DCs) in tumor-draining lymph nodes increases three-fold in FOLactis group, compared to the wild-type bacteria group. The enhanced DCs recruitment promotes the infiltration of effector memory T and CD8+ T cells, as well as the activation of NK cells and the polarization of macrophages to M1. Programmed death 1 blockade antibody combination further enhances the antitumor efficacy of I-Pl FOLactis. In summary, we first develop an innovative intrapleural strategy based on FOLactis, exhibiting remarkable efficacy and favorable biosafety profiles. These findings suggest prospective clinical translation of engineered probiotics for managing MPE through direct administration into the pleural cavity.

Effects of forest regeneration types on phosphorus fractions of soil aggregates in subtropical forest.

Soil aggregates are important for the storage and availability of phosphorus in the soil. However, how forest regeneration types affect phosphorus fractions of soil aggregates remains unclear. In this study, we examined the composition of aggregate particle size, phosphorus fractions, phosphorus sorption capacity index (PSOR), legacy phosphorus index (PLGC) and degree of phosphorus saturation by Mehlich 3 (DPSM3) in bulk soils and soil aggregates of Castanopsis carlesii secondary forest (slight disturbance), C. carlesii human-assisted regeneration forest (moderate disturbance), and Cunninghamia lanceolata plantation (severe disturbance), aiming to explore the impact of forest regeneration types on phosphorus availability and supply potential of bulk soils and soil aggregates. The results showed that forest regeneration types significantly influenced the composition of soil aggregates. The proportion of coarse macroaggregates (>2 mm) in the soil of C. carlesii secondary forest and human-assisted regeneration forest was significantly higher than that in the C. lanceolata plantation, while the proportion of silt and clay fraction (<0.053 mm) showed an opposite trend. The composition of soil aggregates significantly affected the contents of different phosphorus fractions. The contents of soil labile phosphorus fractions (PSOL and PM3) decreased as aggregate particle size decreased. The contents of soil total phosphorus (TP), total organic phosphorus (Po), mode-rately labile phosphorus fractions (PiOH and PoOH), and occluded phosphorus (POCL), as well as PSOR and PLGC, exhibited a trend of decreasing at the beginning and then increasing as particle size decreased. The contents of TP, Po, and PiOH in coarse and silt macroaggregates was significantly higher than that in fine macroaggregates (0.25-2 mm) and microaggregates (0.053-0.25 mm). Forest regeneration types significantly influenced the contents of phosphorus fractions of bulk soils and soil aggregates. The contents of TP, Po, PSOL, and PM3 in the soil of C. carlesii secondary forests was significantly higher than that in C. carlesii human-assisted regeneration forest and C. lanceolata plantation. The contents of PSOL and PM3 in different-sized aggregates of C. carlesii secondary forests were significantly higher than that in the C. lanceolata plantation. Forest regeneration types significantly influenced the composition and supply potential of phosphorus fractions in soil aggregates. The proportions of PSOL, and PM3 to TP in different-sized soil aggregates were significantly lower in C. carlesii human-assisted regeneration forest compared with C. carlesii secondary forest. PSOR and DPSM3 in different-sized soil aggregates were significantly lower in C. lanceolata plantation than that in C. carlesii secondary forest. Overall, our results indicated that natural regeneration is more favorable for maintaining soil phosphorus availability, and that forest regeneration affects soil phosphorus availa-bility and its supply potential by altering the composition of soil aggregates.

An Injectable Magnesium-Based Cement Stimulated with NIR for Drug-Controlled Release and Osteogenic Potential.

Magnesium phosphate bone cement (MPC) has gained widespread usage in orthopedic implantation due to its fast-setting and high initial strength benefits. However, the simultaneous attainment of drug-controlled release and osteogenic potential in MPC remains a significant challenge. Herein, a strategy to create a smart injectable cement system using nanocontainers and chondroitin sulfate is proposed. It employs nanocontainers containing alendronate-loaded mesoporous silica nanoparticles, which are surface-modified with polypyrrole to control drug release in response to near-infrared (NIR) stimulation. The alendronate-incorporated cement (ACMPC) exhibits improved compressive strength (70.6 ± 5.9 MPa), prolonged setting time (913 s), and exceptional injectability (96.5% of injection rate and 242 s of injection time). It also shows the capability to prevent degradation, thus preserving mechanical properties. Under NIR irradiation, the cement shows good antibacterial properties due to the combined impact of hyperthermia, reactive oxygen species, and alendronate. Furthermore, the ACMPC (NIR) group displays good biocompatibility and osteogenesis capabilities, which also lead to an increase in alkaline phosphatase activity, extracellular matrix mineralization, and the upregulation of osteogenic genes. This research has significant implications for developing multifunctional biomaterials and clinical applications.

IbNF-YA1 is a key factor in the storage root development of sweet potato.

As a major worldwide root crop, the mechanism underlying storage root yield formation has always been a hot topic in sweet potato [Ipomoea batatas (L.) Lam.]. Previously, we conducted the transcriptome database of differentially expressed genes between the cultivated sweet potato cultivar "Xushu18," its diploid wild relative Ipomoea triloba without storage root, and their interspecific somatic hybrid XT1 with medium-sized storage root. We selected one of these candidate genes, IbNF-YA1, for subsequent analysis. IbNF-YA1 encodes a nuclear transcription factor Y subunit alpha (NF-YA) gene, which is significantly induced by the natural auxin indole-3-acetic acid (IAA). The storage root yield of the IbNF-YA1 overexpression (OE) plant decreased by 29.15-40.22% compared with the wild type, while that of the RNAi plant increased by 10.16-21.58%. Additionally, IAA content increased significantly in OE plants. Conversely, the content of IAA decreased significantly in RNAi plants. Furthermore, real-time quantitative reverse transcription-PCR (qRT-PCR) analysis demonstrated that the expressions of the key genes IbYUCCA2, IbYUCCA4, and IbYUCCA8 in the IAA biosynthetic pathway were significantly changed in transgenic plants. The results indicated that IbNF-YA1 could directly target IbYUCCA4 and activate IbYUCCA4 transcription. The IAA content of IbYUCCA4 OE plants increased by 71.77-98.31%. Correspondingly, the storage root yield of the IbYUCCA4 OE plant decreased by 77.91-80.52%. These findings indicate that downregulating the IbNF-YA1 gene could improve the storage root yield in sweet potato.

Intra-bone marrow injection with engineered Lactococcus lactis for the treatment of metastatic tumors: Primary report.

Bone marrow has the capacity to produce different types of immune cells, such as natural killer cells, macrophages, dendritic cells (DCs) and T cells. Improving the activation of immune cells in the bone marrow can enhance the therapy of bone metastases. Previously, we designed an engineered probiotic Lactococcus lactis, capable of expressing a fusion protein of Fms-like tyrosine kinase 3 ligand and co-stimulator OX40 ligand (FOLactis), and proved that it can induce the activation and differentiation of several immune cells. In this research, we successfully establish mouse models of bone metastasis, lung metastasis and intraperitoneal dissemination, and we are the first to directly inject the probiotics into the bone marrow to inhibit tumor growth. We observe that injecting FOLactis into the bone marrow of mice can better regulate the immune microenvironment of tumor-bearing mice, resulting in a tumor-suppressive effect. Compared to subcutaneous (s.c.) injection, intra-bone marrow (IBM) injection is more effective in increasing mature DCs and CD8+ T cells and prolonging the survival of tumor-bearing mice. Our results confirm that IBM injection of FOLactis reprograms the immune microenvironment of bone marrow and has remarkable effectiveness in various metastatic tumor models.

Magnetic-Actuated Jumping of Droplets on Superhydrophobic Grooved Surfaces: A Versatile Strategy for Three-Dimensional Droplet Transportation.

On-demand droplet transportation is of great significance for numerous applications. Although various strategies have been developed for droplet transportation, out-of-surface three-dimensional (3D) transportation of droplets remains challenging. Here, a versatile droplet transportation strategy based on magnetic-actuated jumping (MAJ) of droplets on superhydrophobic grooved surfaces (SHGSs) is presented, which enables 3D, remote, and precise manipulation of droplets even in enclosed narrow spaces. To trigger MAJ, an electromagnetic field is utilized to deform the droplet on the SHGS with the aid of an attached magnetic particle, thereby the droplet acquires excess surface energy. When the electromagnetic field is quickly removed, the excess surface energy is partly converted into kinetic energy, allowing the droplet to jump atop the surface. Through high-speed imaging and numerical simulation, the working mechanism and size matching effect of MAJ are unveiled. It is found that the MAJ behavior can only be observed if the sizes of the droplets and the superhydrophobic grooves are matched, otherwise unwanted entrapment or pinch-off effects would lead to failure of MAJ. A regime diagram which serves as a guideline to design SHGSs for MAJ is proposed. The droplet transportation capacities of MAJ, including in-surface and out-of-surface directional transportation, climbing stairs, and crossing obstacles, are also demonstrated. With the ability to remotely manipulate droplets in enclosed narrow spaces without using any mechanical moving parts, MAJ can be used to design miniaturized fluidic platforms, which exhibit great potential for applications in bioassays, microfluidics, droplet-based switches, and microreactions.

Unveiling inflammatory and prehypertrophic cell populations as key contributors to knee cartilage degeneration in osteoarthritis using multi-omics data integration.

OBJECTIVES: Single-cell and spatial transcriptomics analysis of human knee articular cartilage tissue to present a comprehensive transcriptome landscape and osteoarthritis (OA)-critical cell populations. METHODS: Single-cell RNA sequencing and spatially resolved transcriptomic technology have been applied to characterise the cellular heterogeneity of human knee articular cartilage which were collected from 8 OA donors, and 3 non-OA control donors, and a total of 19 samples. The novel chondrocyte population and marker genes of interest were validated by immunohistochemistry staining, quantitative real-time PCR, etc. The OA-critical cell populations were validated through integrative analyses of publicly available bulk RNA sequencing data and large-scale genome-wide association studies. RESULTS: We identified 33 cell population-specific marker genes that define 11 chondrocyte populations, including 9 known populations and 2 new populations, that is, pre-inflammatory chondrocyte population (preInfC) and inflammatory chondrocyte population (InfC). The novel findings that make this an important addition to the literature include: (1) the novel InfC activates the mediator MIF-CD74; (2) the prehypertrophic chondrocyte (preHTC) and hypertrophic chondrocyte (HTC) are potentially OA-critical cell populations; (3) most OA-associated differentially expressed genes reside in the articular surface and superficial zone; (4) the prefibrocartilage chondrocyte (preFC) population is a major contributor to the stratification of patients with OA, resulting in both an inflammatory-related subtype and a non-inflammatory-related subtype. CONCLUSIONS: Our results highlight InfC, preHTC, preFC and HTC as potential cell populations to target for therapy. Also, we conclude that profiling of those cell populations in patients might be used to stratify patient populations for defining cohorts for clinical trials and precision medicine.

Design of highly robust super-liquid-repellent surfaces that can resist high-velocity impact of low-surface-tension liquids.

Super-liquid-repellent surfaces capable of preventing wetting with various liquids have tremendous application. However, high liquid repellency relies on surface texturing to minimize the solid-liquid interfacial contact, which generally results in impaired interface robustness and pressure resistance. Consequently, the surface tends to undergo a Cassie-Baxter to Wenzel wetting transition and loses liquid repellency under high-velocity liquid impact, especially for low-surface-tension liquids. Here, surface design through combining the nanoscale effect and doubly reentrant structure is demonstrated to solve the above challenge. By utilizing a facile colloidal lithography process, robust liquid repellent surfaces featuring nanoscale doubly reentrant (NDR) structures are constructed. The nanoscale features ensure sufficient triple contact line density at a low solid-liquid contact fraction to enhance the capillary force for liquid suspension. In conjunction with the doubly reentrant topography that maximizes the upward component of capillary force, such NDR surfaces enable an extremely robust solid-liquid-gas composite interface. As a result, the prepared NDR surface maintain excellent repellency upon high-velocity impact of various liquids, including ethylene glycol drops with a Weber number (We) above 306 and ethanol drops with a We of 57. The above findings can help the development of super-liquid-repellent surfaces applicable to harsh conditions of high-velocity liquid impact or high hydrostatic pressure.

Genome-wide identification, evolution, and role of SPL gene family in beet (Beta vulgaris L.) under cold stress.

BACKGROUND: SPL transcription factors play vital roles in regulating plant growth, development, and abiotic stress responses. Sugar beet (Beta vulgaris L.), one of the world's main sugar-producing crops, is a major source of edible and industrial sugars for humans. Although the SPL gene family has been extensively identified in other species, no reports on the SPL gene family in sugar beet are available. RESULTS: Eight BvSPL genes were identified at the whole-genome level and were renamed based on their positions on the chromosome. The gene structure, SBP domain sequences, and phylogenetic relationship with Arabidopsis were analyzed for the sugar beet SPL gene family. The eight BvSPL genes were divided into six groups (II, IV, V, VI, VII, and VIII). Of the BvSPL genes, no tandem duplication events were found, but one pair of segmental duplications was present. Multiple cis-regulatory elements related to growth and development were identified in the 2000-bp region upstream of the BvSPL gene start codon (ATG). Using quantitative real-time polymerase chain reaction (qRT-PCR), the expression profiles of the eight BvSPL genes were examined under eight types of abiotic stress and during the maturation stage. BvSPL transcription factors played a vital role in abiotic stress, with BvSPL3 and BvSPL6 being particularly noteworthy. CONCLUSION: Eight sugar beet SPL genes were identified at the whole-genome level. Phylogenetic trees, gene structures, gene duplication events, and expression profiles were investigated. The qRT-PCR analysis indicated that BvSPLs play a substantial role in the growth and development of sugar beet, potentially participating in the regulation of root expansion and sugar accumulation.

amer1 Regulates Zebrafish Craniofacial Development by Interacting with the Wnt/ß-Catenin Pathway.

Microtia-atresia is a rare type of congenital craniofacial malformation causing severe damage to the appearance and hearing ability of affected individuals. The genetic factors associated with microtia-atresia have not yet been determined. The AMER1 gene has been identified as potentially pathogenic for microtia-atresia in two twin families. An amer1 mosaic knockdown zebrafish model was constructed using CRISPR/Cas9. The phenotype and the development process of cranial neural crest cells of the knockdown zebrafish were examined. Components of the Wnt/ß-catenin pathway were examined by qPCR, Western blotting, and immunofluorescence assay. IWR-1-endo, a reversible inhibitor of the Wnt/ß-catenin pathway, was applied to rescue the abnormal phenotype. The present study showed that the development of mandibular cartilage in zebrafish was severely compromised by amer1 knockdown using CRISPR/Cas9. Specifically, amer1 knockdown was found to affect the proliferation and apoptosis of cranial neural crest cells, as well as their differentiation to chondrocytes. Mechanistically, amer1 exerted an antagonistic effect on the Wnt/ß-catenin pathway. The application of IWR-1-endo could partially rescue the abnormal phenotype. We demonstrated that amer1 was essential for the craniofacial development of zebrafish by interacting with the Wnt/ß-catenin pathway. These findings provide important insight into the role of amer1 in zebrafish mandibular development and the pathology of microtia-atresia caused by AMER1 gene mutations in humans.

Superhydrophobic Surface-Assisted Preparation of Microspheres and Supraparticles and Their Applications.

Superhydrophobic surface (SHS) has been well developed, as SHS renders the property of minimizing the water/solid contact interface. Water droplets deposited onto SHS with contact angles exceeding 150°, allow them to retain spherical shapes, and the low adhesion of SHS facilitates easy droplet collection when tilting the substrate. These characteristics make SHS suitable for a wide range of applications. One particularly promising application is the fabrication of microsphere and supraparticle materials. SHS offers a distinct advantage as a universal platform capable of providing customized services for a variety of microspheres and supraparticles. In this review, an overview of the strategies for fabricating microspheres and supraparticles with the aid of SHS, including cross-linking process, polymer melting, and droplet template evaporation methods, is first presented. Then, the applications of microspheres and supraparticles formed onto SHS are discussed in detail, for example, fabricating photonic devices with controllable structures and tunable structural colors, acting as catalysts with emerging or synergetic properties, being integrated into the biomedical field to construct the devices with different medicinal purposes, being utilized for inducing protein crystallization and detecting trace amounts of analytes. Finally, the perspective on future developments involved with this research field is given, along with some obstacles and opportunities.