Targeted pH- and redox-responsive AuS/micelles with low CMC for highly efficient sonodynamic therapy of metastatic breast cancer.

The efficacy of injectable micellar carriers is hindered due to the disassembly of micelles into free surfactants in the body, resulting in their dilution below the critical micelle concentration (CMC). Copolymer micelles were developed to address this issue, containing a superhydrophilic zwitterionic block and a superhydrophobic block with a disulfide bond, which exhibited a CMC lower than conventional micellar carriers. Cleavable copolymers composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) zwitterion and polycaprolactone CHLZW as the shell, with gold nanoparticles as their core, were studied to deliver doxorubicin to tumor cells while reducing the side effect of the free cytotoxic agent. The research focused on the impact of gold nanoparticles present in targeted TMT-micelles core on stability and in vivo bioavailability and sonotoxicity of the nanoparticles, as well as their synergistic effect on targeted chemotherapy. The nanomicelles prepared in this study demonstrated excellent biocompatibility and responsiveness to stimuli. PCL-SS-MPC nanomicelles displayed drug release in response to GSH and pH, resulting in high DOX release at GSH 10 mM and pH 5. Our findings, supported by MTT, flow cytometry, and confocal laser scanning microscopy, demonstrated that AuS-PM-TMTM-DOX micelles effectively induced apoptosis and enhanced cellular uptake in MCF7 and MDA-MB231 cell lines. The cytotoxic effects of AuS-PM-DOX/US on cancer cells were approximately 38 % higher compared to AuS-PM-DOX samples at a concentration of IC50 0.68 nM. This increase in cellular toxicity was primarily attributed to the promotion of apoptosis. The introduction of disulfide linkages in AuSNPs resulted in increased ROS production when exposed to ultrasound stimulation, due to a reduction in GSH levels. Compared to other commercially available nanosensitizers such as titanium dioxide, exposure of AuS-PM to ultrasound radiation (1.0 W/cm, 2 min) significantly enhanced cavitation effects and resulted in 3 to 5 times higher ROS production. Furthermore, laboratory experiments using human breast cancer cells (MDA-MB-231, MCF7) demonstrated that the toxicity of AuS-PM in response to ultrasound waves is dose-dependent. The findings of this study suggest that this formulated nanocarrier holds great potential as a viable treatment option for breast cancer. It can induce apoptosis in cancer cells, reduce tumor size, and display notable therapeutic efficacy.

pH-sensitive bilayer electrospun nanofibers based on ethyl cellulose and Eudragit S-100 as a dual delivery system for treatment of the burn wounds; preparation, characterizations, and in-vitro/in-vivo assessment.

A pH-sensitive bilayer electrospun nanofibrous mat containing both antibiotic (gentamicin sulfate, GEN) and non-steroidal anti-inflammatory (diclofenac sodium, DIC) drugs was fabricated for burn wound dressing by electrospinning technique, in which ethyl cellulose (EC) and ethyl cellulose/Eudragit S-100 (EC/ES-100) formed the top and bottom layers, respectively. The fabricated pH-sensitive bilayer electrospun nanofibrous mats were characterized from aspects of both structure and efficiency. Physicochemical properties were investigated via SEM, FTIR, and TGA. The swelling ratio and in vitro drug release of the fabricated nanofibrous mats were studied in different pHs. MTT was applied to assess the safety of the fiber mats. Finally, the in vivo efficiency of the designed pH-sensitive bilayer electrospun nanofibrous mats was examined on the male Wistar rats. Based on the histological analysis and wound healing test (in vivo animal experiments), the (ES100/EC-DIC/GEN)-(EC) pH-sensitive bilayer nanofibrous mat displayed faster wound healing than other bilayer nanofibrous mat. As a result, (ES100/EC-DIC/GEN)-(EC) bilayer nanofibrous mat with pH-responsion could accelerate the burn wound healing process via decreasing the adverse effects of GEN and DIC as topical antimicrobial and anti-inflammatory agents, receptively.

Dual drug delivery system based on layered double hydroxides/carboxymethyl cellulose-poly ethylene oxide bionanocomposite electrospun fibrous mats: Fabrication, characterization, in-vitro and in-vivo studies.

The main goal of the present project was to design and develop ibuprofen (IBU) and layered double hydroxides-vancomycin (LDH-VAN) nanohybrid loaded bionanocomposite fibrous mats to increase the wound healing rate. Thus, first, LDH-VAN nanohybrid particles was synthesized by in-situ incorporation of VAN into the Mg-Al-LDH interlayers during the co-precipitation of hydroxides. Then, LDH-VAN/IBU/CMC-PEO bionanocomposite fibrous mats were fabricated by electrospinning technique. Test samples were examined XRD, SEM, TEM, TGA, and FTIR. In vitro drug release test was performed in the phosphate buffer solution (pH = 7.4) to prove the efficiency of the fabricated bionanocomposite fibrous mats as a sustained-release carrier for both VAN and IBU. All the fabricated bionanocomposite fibrous mats did not displayed any significant cytotoxicity on NIH/3 T3 fibroblast cells. The wound area in the rats treated with LDH-VAN/IBU/CMC-PEO bionanocomposite fibrous mats was less than other treatment groups. Based on histological analysis, the LDH-VAN/IBU/CMC-PEO bionanocomposite fibrous mats possess a faster wound healing than other nanofibrous mats. Data obtained from the present project indicated that LDH-VAN/IBU/CMC-PEO bionanocomposite fibrous mats could accelerate the wound healing process.

Montmorillonite-Famotidine/Chitosan Bio-nanocomposite Hydrogels as a Mucoadhesive/Gastroretentive Drug Delivery System.

The main purpose of the present study was to fabricate mucoadhesive bio-nanocomposite hydrogels to prolong the drug retention time in the stomach. In these bio-nanocomposite hydrogels, chitosan (CH) was used as a bioadhesive matrix, montmorillonite (MMT) was applied to modulate the release rate, and tripolyphosphate (TPP) was the cross-linking agent. The test samples were analyzed via different methods such as X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Drug incorporation efficacy and mucoadhesive strength of these nanocomposite hydrogel beads were studied. Swelling and in vitro drug release behaviors of these bio-nanocomposite hydrogels were evaluated in simulated gastric fluid (SGF; pH 1.2). The optimized MMT-famotidine (FMT)/CH bio-nanocomposite hydrogels displayed a controllable and sustainable drug release profile with suitable mucoadhesion and prolonged retention time in the stomach. Thus, the results demonstrated that the fabricated mucoadhesive bio-nanocomposite hydrogels could remarkably increase the therapeutic efficacy and bioavailability of FMT by the oral route.

Burgeoning Polymer Nano Blends for Improved Controlled Drug Release: A Review.

With continual rapid developments in the biomedical field and understanding of the important mechanisms and pharmacokinetics of biological molecules, controlled drug delivery systems (CDDSs) have been at the forefront over conventional drug delivery systems. Over the past several years, scientists have placed boundless energy and time into exploiting a wide variety of excipients, particularly diverse polymers, both natural and synthetic. More recently, the development of nano polymer blends has achieved noteworthy attention due to their amazing properties, such as biocompatibility, biodegradability and more importantly, their pivotal role in controlled and sustained drug release in vitro and in vivo. These compounds come with a number of effective benefits for improving problems of targeted or controlled drug and gene delivery systems; thus, they have been extensively used in medical and pharmaceutical applications. Additionally, they are quite attractive for wound dressings, textiles, tissue engineering, and biomedical prostheses. In this sense, some important and workable natural polymers (namely, chitosan (CS), starch and cellulose) and some applicable synthetic ones (such as poly-lactic-co-glycolic acid (PLGA), poly(lactic acid) (PLA) and poly-glycolic acid (PGA)) have played an indispensable role over the last two decades for their therapeutic effects owing to their appealing and renewable biological properties. According to our data, this is the first review article highlighting CDDSs composed of diverse natural and synthetic nano biopolymers, blended for biological purposes, mostly over the past five years; other reviews have just briefly mentioned the use of such blended polymers. We, additionally, try to make comparisons between various nano blending systems in terms of improved sustained and controlled drug release behavior.

Fabrication and In-vitro Evaluation of Buccal Mucoadhesive Tablet of Meloxicam.

In this study, buccal mucoadhesive tablets of meloxicam were formulated for drug delivery as an alternative route. Direct compression method was applied for the preparation of tablets. Also, different polymers, including hydroxypropyl methyl cellulose (HPMC) 1000, 4000, and 10000, as well as carbopol 934p and carbopol 971p were used as the mucoadhesive polymer and retardant polymer. Thirteen formulations were investigated with various concentrations of polymers. The physicochemical characteristics, in-vitro drug release, swelling index, and taste modification of tablets were evaluated. Also, Carr's index and Hausner ratio were studied. In addition, zero-order, first-order, and Higuchi kinetics were investigated and the results showed that the highest correlation coefficient (R2) is related to zero-order kinetic for formulations B2 and B3. Furthermore, the highest R2 is related to Higuchi kinetic for formulation C3. Formulation B2 showed the maximum release of 99% in 12 h. The results demonstrated that Formulation B2 can be considered as a proper buccal mucoadhesive tablet of meloxicam with desired property.

Crosslinked-polyvinyl alcohol-carboxymethyl cellulose/ZnO nanocomposite fibrous mats containing erythromycin (PVA-CMC/ZnO-EM): Fabrication, characterization and in-vitro release and anti-bacterial properties.

Recently, nanocomposite nanofibers have been extensively used for biomedical applications. It is expected that simultaneous incorporation of antibiotic drugs and ZnO nanoparticles into nanofiber resulted in providing the synergistic anti-bacterial effect. The main aim of the present study is to fabricate polyvinyl alcohol (PVA)/carboxymethyl cellulose (CMC)-ZnO nanocomposite fibrous mats containing erythromycin (EM) drug and crosslink them using 2% glutaraldehyde vapor and 3% AlCl3 alcoholic solution. The fabricated nanofibers characterized via TGA, FTIR, TEM, and SEM, indicating that the addition of ZnO nanoparticles and EM molecules into the fabricated nanofibers resulted in changing their average diameter. Their anti-bacterial activity was studied against S. aureus and E. coli and found that PVA-CMC/ZnO-EM nanofibers show excellent antimicrobial activity. In-vitro release profile showed that EM release from PVA-CMC/ZnO-EM nanofibers was slowly increased. Sustained drug release profile and excellent anti-bacterial activity of PVA-CMC/ZnO-EM nanofiber indicated that it was an ideal biomaterial for wound dressings.

Facile Synthesis and Characterization of Ibuprofen-mesoporous Hydroxyapatite Nanohybrid as a Sustained Drug Delivery System.

The present study deals with the fabrication of ibuprofen-mesoporous hydroxyapatite (IBU-MHA) particles via the incorporation of ibuprofen (IBU)-as a nonsteroidal anti-inflammatory drug-into mesoporous hydroxyapatite nanoparticles (MHANPs) using an impregnation process, as a novel drug delivery device. MHANPs were synthesized by a self-assembly process using cetyltrimethylammonium bromide (CTAB) as a cationic surfactant and 1-dodecanethiol as a pore expander under basic condition. The focus of the present study was to optimize the incorporation of IBU molecules into MHANPs under different loading conditions. The synthesized MHANPs and IBU-MHA particles were confirmed by X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FTIR), brunauer-emmett-teller (BET), transmission electron microscopy (TEM), and thermal analysis (TGA). Drug loading (DL) efficiency of IBU-MHA particles was determined by ultraviolet-visible (UV-Vis) spectroscopy, and indicated that the optimized IBU-MHA particles with high DL (34.5%) can be obtained at an IBU/ MHANPs ratio of 35/50 (mg/mg), impregnation period of 24 h, and temperature of 40 °C using ethanol as solvent. In-vitro drug release test was carried out to prove the efficiency of IBU-MHA particles as a sustained drug delivery system. A more sustained and controlled drug release was observed for this particles, indicating that it may be have good potential as drug reservoirs for local drug release.

Tripolyphosphate-crosslinked chitosan/poly (ethylene oxide) electrospun nanofibrous mats as a floating gastro-retentive delivery system for ranitidine hydrochloride.

The present study describes the fabrication of Tripolyphosphate (TPP)-crosslinked nanofibrous mats based on chitosan for use as a floating gastro-retentive delivery system. TPP-crosslinked chitosan (CH)/poly (ethylene oxide) (PEO)- ranitidine hydrochloride (RH) electrospun nanofibers (75.27 ±â€¯2.10 nm) were prepared by electrospinning 70% v/v acetic acid solutions, and followed by crosslinking by TPP anions. The mechanical, structural and morphological properties of the prepared nanofibers were evaluated via tensile testing, XRD, FT-IR, TGA, NMR, AFM and SEM experimental techniques. The prepared nanofibrous mats showed a pH sensitive swelling profile with maximum water absorbing at pH 1.2. Results obtained from above experimental techniques indicated that crosslinking process did not significantly altered morphological property of nanofibers but rather decreased their diameter and swelling degree, and increased their mechanical properties, thermal stability and bioadhesive strength. Viscosity measurements showed that the addition of PEO and RH to the chitosan solution, depending to its concentration lead to decrease in the viscosity of its solution. Also, floating test showed that the prepared nanofibrous mats remain floated onto surface of the dissolution medium for more than 48 h. Based on in- vitro drug release data analysis, TPP-crosslinked CH/PEO nanofibrous mats decreased initial burst release and it was exhibited a sustained release profile for the RH from the TPP-crosslinked CH/PEO-RH electrospun nanofibrous mats.

Facile preparation and characterization of pH sensitive Mt/CMC nanocomposite hydrogel beads for propranolol controlled release.

The main aim of the present study was to design pH-sensitive nanocomposite hydrogel beads, based on carboxymethyl cellulose (CMC) and montmorillonite (Mt)-propranolol (PPN) nanohybrid, and evaluate whether the prepared nanocomposite beads could potentially be used as oral drug delivery systems. PPN-as a model drug-was intercalated into the interlayer space of Mt clay mineral via the ion exchange procedure. The resultant nanohybrid (Mt-PPN) was applied to fabricate nanocomposite hydrogel beads by association with carboxymethyl cellulose. The characterization of test samples was performed using different techniques: X-Ray Diffraction (XRD), IR spectroscopy (FT-IR), thermal gravity analysis (TGA), and scanning electron microscopy (SEM). The drug encapsulation efficiency was evaluated by UV-vis spectroscopy, and was found to be high for Mt/CMC beads. In vitro drug release test was performed in the simulated gastrointestinal conditions to evaluate the efficiency of Mt-PPN/CMC nanocomposite beads as a controlled-release drug carrier. The drug release profiles indicated that the Mt-PPN/CMC nanocomposite beads had high stability against stomach acid and a sustained- and controlled-release profile for PPN under the simulated intestinal conditions.

Facile fabrication and characterization of a novel oral pH-sensitive drug delivery system based on CMC hydrogel and HNT-AT nanohybrid.

The main aim of the present study was to design pH-sensitive bionanocomposite hydrogel beads based on CMC and HNT-AT nanohybrid and evaluate whether prepared bionanocomposite beads have the potential to be used in drug delivery applications. Atenolol (AT), as a model drug, was incorporated into the lumen of HA nanotubes via the co-precipitation technique. HNT/AT nanohybrid and CMC/HNT-AT beads were characterized via XRD, SEM, TGA, and FT-IR techniques. Drug loading and encapsulation efficiency was found to be high for CMC/HNT3 beads. Moreover, the swelling and drug release properties of the prepared CMC/HA-AT beads were investigated, and showed a pH sensitive swelling behavior with maximum its content at pH 6.8. Also, it was found that the swelling ratio of CMC/HNT beads was lower than that of pristine CMC beads. Drug release behavior of CMC/HNT-AT bionanocomposite hydrogel beads were investigated. A more sustained and controlled drug releases were observed for CMC/HNT-AT beads.

PH-sensitive bionanocomposite hydrogel beads based on carboxymethyl cellulose/ZnO nanoparticle as drug carrier.

The present work explains the preparation of new pH-sensitive bionanocomposite beads based on carboxymethyl cellulose (CMC) and ZnO nanoparticles for use as controlled release drug delivery systems. Fe3+ ion as physical crosslinking agent was used to prepare ionic cross-linked bionanocomposite hydrogel beads. Propranolol hydrochloride (PPN) has been chosen as a model drug. Characterization of the pH-sensitive bionanocomposite beads resulting from incorporation of different content of ZnO nanoparticles into CMC matric was carried out using different experimental techniques: XRD, FT-IR, TGA, SEM and EDX. Propranolol incorporation efficiency in beads was determined by UV-vis spectroscopy and was found to be high. Moreover, the swelling and drug release properties of the bionanocomposite hydrogels were investigated. The prepared bionanocomposite beads showed a pH sensitive swelling behavior with maximum water absorbing at pH 7.4. Also, it was found that the swelling ratio of ZnO/CMC hydrogels in different aqueous solutions was rather higher in comparison with its neat hydrogel. In vitro drug release test was carried out to prove the effectiveness of this novel type of bionanocomposite hydrogel beads as a controlled drug delivery system. A more sustained and controlled drug releases were observed for ZnONPs containing NaCMC beads, which increased by the increase in ZnONPs content.

Facile synthesis of chitosan/ZnO bio-nanocomposite hydrogel beads as drug delivery systems.

ZnO nanoparticles were synthesized in situ during the formation of physically cross-linked chitosan hydrogel beads using sodium tripolyphosphate as the cross-linker. The aim of the study was to investigate whether these nanocomposite beads have the potential to be used in drug delivery applications. The formation of ZnO nanoparticles (ZnONPs) in the hydrogels was confirmed by X-ray diffraction and scanning electron microscopy studies. SEM micrographs revealed the formation of ZnONPs with size range of 10-25 nm within the hydrogel matrix. Furthermore, the swelling and drug release properties of the beads were studied. The prepared nanocomposite hydrogels showed a pH sensitive swelling behavior. The ZnO nanocomposite hydrogels have rather higher swelling ratio in different aqueous solutions in comparison with neat hydrogel. In vitro drug release test was carried out to prove the effectiveness of this novel type of nanocomposite beads as a controlled drug delivery system. A prolonged and more controlled drug releases were observed for ZnONPs containing chitosan beads, which increased by the increase in ZnONPs content.