Influence of Laser Irradiation Settings, during Diode-Assisted Endodontics, on the Intraradicular Adhesion of Self-Etch and Self-Curing Luting Cement during Restoration-An Ex Vivo Study.

Background: Diode-assisted endodontics is nowadays utilized for pulp space disinfection, but little is known on the bonding potential of this lased root dentin when the tooth is restored with an intracanal polymer post. Objectives: to investigate the influence of diode laser irradiation settings, in laser-assisted endodontics, on the intraradicular bonding of composite materials. Methods: Sixteen two-rooted, maxillary first premolars were collected, prepared up to F4 (Protaper Universal. Dentsply-Maillefer, Ballaigues, Switzerland), and randomly assigned in two groups: group A (chopped mode or short pulse), diode irradiated according to protocol, pulse 25 ms, power 2.5 W, and group B (microchopped mode or ultrashort pulse), pulse 25 µs, peak power 12 W (both groups GentleRay. KaVo Dental, Biberach an der Riss, Germany). Buccal canals were irradiated, palatal ones served as controls. Canals were then obturated, post space was created in all canals, and quartz-fiber posts (ICE light Danville. Danville Materials, San Ramon, CA, USA) were cemented by self-etch self-curing cement (Max Cem Elite. Kerr, West Collins Orange, CA, USA) (Max Cem Elite. Kerr, Brea, CA, USA). A week later, teeth were sectioned horizontally in 1 mm increments. Push-out test was conducted in a Zwick testing machine (Zwick Roell, Ulm, Germany) at 1 mm/min speed, and the force required to dislodge the post from each specimen (F-max) was recorded. Weibull regression models were applied for statistical analyses. Results: Differences in F-max by group (control vs. chopped mode vs. microchopped mode) and height (meaning the apical-to-coronal position of each specimen along the root) were statistically significant (p < 0.05 in all cases). Conclusions: Short pulses (or chopped mode) had a profound positive effect on the quality of intraradicular bonding, while Ultrashort pulses (or microchopped mode) affected it negatively. In addition, apically positioned bonding proved weaker compared with more coronally located specimens.

Air Quality in a Dental Clinic during Er:YAG Laser Usage for Cavity Preparation on Human Teeth-An Ex-Vivo Study.

Chemical air pollution in dental clinics consists of the emission of gases and particulate matter (PM), both generated by dental equipment and tooth tissues. One basic application of Erbium Laser devices is cavity preparation on human teeth due to its strong affinity to water and hydroxyapatite. The objective of this study was the evaluation of indoor air quality during the application of an Er:YAG laser, as a dentin removal instrument, in a Dental Clinic. Particulate Matter (PM) was measured using the standard method of EN legislation. In order to measure total Volatile Organic compounds (VOCs), a portable monitor was used. In the first experiment, PM10 and PM2.5 concentrations were increased by approximately 10 and 15 times, respectively. From the second experiment it can be concluded that neither of the measured particle concentrations exceeded the recommended indoor limit values while windows were open, although laser influence was still detectable. Within the limitations applied herein, it was found that Er:YAG laser activity for hard dental tissue removal was associated with high PM and TVOCs concentration values in the working environment, under insufficient or no ventilation. Physical ventilation in the aforementioned setting proved to be an important key factor in improving air quality, as both PM and TVOCs concentrations decreased significantly.

The efficacy of ultrasonic and PIPS (photon-induced acoustic streaming) irrigation to remove artificially placed dentine debris plugs out of an artificial and natural root model.

The aim was to validate an artificial resin 'root canal wall groove model' (RCWGM) mimicking the situation of natural roots with a groove of identical dimensions on debris removal out of these grooves, and to evaluate Erbium 'laser-activated irrigation' (LAI) with two conical tips at PIPS (photon-induced photoacoustic streaming) settings, with different activation times and different root canal positions on debris removal out of the grooves. A split RCWGM was used (resin blocks and roots of maxillary canines) with a canal size 40/0.06. The grooves in the apical third were filled with stained dentinal debris. Seventeen irrigation protocols (n = 20) were used: syringe-needle irrigation (3× 20 s), manual dynamic activation (1× 60 s), ultrasonically activated irrigation (UAI) with 25/25 Irrisafe (3× 20 s) and LAI (2940 nm Er:YAG) with X-Pulse or PIPS tips at PIPS settings (20 mJ, 50 µs, 20 Hz) and with the fibre (IN) or (OUT) the canal: IN during 1× 20 s, and OUT during 1× 20 s, 2× 20 s, 3× 20 s, 30 s, 2× 30 s and 1× 60 s. The quantity of remaining dentine debris in the groove was evaluated on a numerical scale. Statistical analysis was performed by means of proportional odds logistic regression, equivalence testing and Wald tests. The level of significance was set at 0.05. Resin models and the RCWGM with natural teeth can be called equivalent (log odds ratio 0.185). There were mostly no statistically significant differences for debris removal between UAI and LAI (p > 0.05) and between LAI with PIPS and X-Pulse (p > 0.05). Although not statistically different, the numbers of completely cleaned grooves were higher with LAI than with UAI for a 1-min activation, confirming findings from other studies. There is no difference in cleaning efficacy between X-Pulse and PIPS tips at PIPS settings.

The Effect of Low-Level Laser Therapy on Bone Healing After Rapid Maxillary Expansion: A Systematic Review.

OBJECTIVE: The study aimed to systematically appraise the evidence on the effects of low level laser therapy (LLLT) on bone healing following rapid maxillary expansion (RME). METHODS: Electronic search was performed in MEDLINE, Scopus, and Embase databases using appropriate Medical Subject Heading terms, with no time restriction. ClinicalTrials.gov ( www.clinicaltrials.gov ) was also searched using the terms "low level laser therapy" and "maxillary expansion." SELECTION CRITERIA: Original research articles on human clinical trials that involved both RME and LLLT were included. Animal studies were also assessed on an exploratory basis. RESULTS: The search strategy resulted in 12 publications (4 randomized controlled trials, 8 animal studies). In human studies, bone density was assessed radiographically (either two-dimensional or three-dimensional imaging). Regardless of the discrepancies in the intervention protocols, the total of the trials revealed that LLLT had stimulatory effects on bone regeneration after RME. The studies in animal models measured the formation and maturation of new bone qualitatively or quantitatively. CONCLUSIONS: Despite the limited evidence, LLLT seems to be a promising intervention for stimulating immediate bone regeneration and healing after midpalatal suture expansion. Long-term, randomized clinical trials are needed to formulate safe results and establish a reliable clinical protocol, rendering the method clinically applicable.

Temperature Development on the External Root Surface During Laser-Assisted Endodontic Treatment Applying a Microchopped Mode of a 980 nm Diode Laser.

OBJECTIVE: The aim of this article was to investigate the temperature increase of the external root surface during laser-assisted endodontic treatment using a diode laser (980 nm) in a microchopped mode. METHODS: Ten freshly extracted, human maxillary incisors with mature apices were collected, prepared to size F4 at working length (ProTaper; Dentsply Maillefer, Ballaigues, Switzerland), mounted to a holder, and irradiated (using spiral movements in coronal direction) with a diode laser (GENTLEray 980 Classic Plus; KaVo, Biberach, Germany) with a 200 µm fiber in four different treatment groups: Group 1 (control group) was irradiated in six cycles of 5-sec irradiation/20-sec pause with 2.5 W in the pulse mode. Groups 2 to 4 were irradiated at six cycles of 5-sec irradiation/20-sec pause in the microchopped mode (Group 2-1.6 W; Group 3-2.0 W; Group 4-2.5 W). The applied mode was 25 ms on/25 ms off. Within the on period, the laser delivered an intermittent sequence of energy complexes and the maximum output was equal to the nominated output of the device (12 W). Canals were kept moist by sterile saline irrigation in between irradiations, and temperature changes were continuously measured using a thermal imaging camera. Recordings were analyzed by a mixed model (analysis of variance [ANOVA] for repeated measurements). RESULTS: The highest mean of temperature rise, 1.94°C ± 1.07°C, was measured in Group 4, followed by Group 3 (1.74°C ± 1.22°C) and Group 2 (1.58°C ± 1.18°C). The lowest increase occurred in Group 1 (1.06°C ± 1.20°C). There was a significant difference (p = 0.041) between the groups. Significant differences were found between Groups 1 and 4 (p = 0.007) and 1 and 2 (p = 0.035). In addition, a marginally significant difference between Groups 1 and 2 (p = 0.052) was noted. There was no significant difference between Groups 2, 3, and 4. Despite the low mean values reported, the highest temperature increase (+5.7°C) was measured in one of the specimens of treatment Group 2 at the middle third. CONCLUSIONS: Under the conditions used and within the limitations of the study, the microchopped diode laser irradiation is a safe possible treatment option in laser-assisted endodontic treatment, concerning the temperature elevation on the external root surface.

Emergency care provided in a Greek dental school and analysis of the patients' demographic characteristics: a prospective study.

OBJECTIVES: The aim of this study was to evaluate the incidence of pain of endodontic origin and its relationship with socio-economic and demographic factors among patients seeking unscheduled urgent dental care. METHODS: Patients attending the Emergency Clinic of Athens Dental School, Greece, between November 2011 and June 2012, were evaluated to determine their socio-economic profile, dental problem and treatment required. The facility operated from Monday to Friday, from 8.30 am to 1.00 pm, excluding the 4 weeks encompassing the Christmas and Easter holidays. In total, 533 patients were assessed regarding gender, age, ethnicity, occupation, reason for visiting, diagnosis and treatment provided. The data obtained were recorded, reviewed, coded and analysed using Poisson regression models. RESULTS: Mondays and Wednesdays were the busiest days of the week. The most common occupation among the patients was 'unemployed'. Pain of endodontic origin (reversible or irreversible pulpitis, or acute apical periodontitis) was the prevailing reason for the visit. The most frequent treatments administered were pulpectomy and drainage. Prescriptions for medications were rare. CONCLUSION: Services were requested primarily by individuals who were experiencing acute pain of endodontic origin, had low or no income and were available during morning hours, probably because of the service's low cost and operational hours. Prospective studies, such as the present investigation, can provide epidemiological evidence and indicate areas in the infrastructure of emergency services which may be improved. Additionally, such studies can provide rationale for public insurance programs and can generate profiles of the patients who utilise these low-cost public services.

Apical debris extrusion associated with oval shaped canals: a comparative study of WaveOne vs Self-Adjusting File.

OBJECTIVES: The aim was to evaluate ex vivo apical debris extrusion associated with WaveOne and Self-Adjusting File instruments when used in oval canals. METHODS: Twenty-four extracted human mandibular premolars with oval-shaped canals were assigned in two equal groups. Following coronal cavity preparation, a glide path was created. Group A was subjected to canal preparation using a WaveOne primary file, which was used along with syringe and needle irrigation and 10 mL of 2.4 % NaOCl solution, followed by flushing with 10 mL of 17 % EDTA solution, activation with EndoActivator for 1 min and final flushing with 10 mL of 2.4 % NaOCl solution, and activation for 30 s. Group B, the SAF system was used with continuous simultaneous irrigation, provided by the system's pump. The irrigant was supplied at 5 mL/min, alternating every minute between 2.4 % NaOCl solution and 17 % EDTA solution, over a total of 4 min followed by final flushing with 10 mL of 2.4 % NaOCl solution. Extruded apical debris from each root canal was collected into a preweighed glass vial and dried. The mean weight of the debris from each group was assessed and analyzed statistically. Both systems resulted in apical debris extrusion. RESULTS: The WaveOne system was associated with a statistically significant greater mean mass of apically extruded debris (2.18 ± 0.44 mg) than the SAF system (0.49 ± 0.33 mg, permutation-based Wilcoxon test, p < 0.001). CONCLUSION: Both WaveOne and the SAF systems were associated with apical debris extrusion. The amount of debris extruded by the WaveOne system was 4.4 times greater than that extruded by the SAF system. CLINICAL RELEVANCE: The results of the present ex vivo comparative study cannot be directly applied to the clinical situation. Difference between both groups remains completely unclear; maybe the amount of extrusion is harmless in both groups or similarly deleterious for the periradicular tissues in both groups or may be dose-related to the amount of the extruded material.

Diagnosis and conservative treatment of extraoral submental sinus tract of endodontic origin: a case report.

Sinus tracts (or fistulas) are a common manifestation of pulpal necrosis that requires conventional -or rarely surgical- endodontic treatment in order to heal. They are mainly identified intraorally and in rare cases they manifestate extraorally, depending on the causative tooth, root location, bone thickness and muscle inserts. Such conditions may be misdiagnosed and confused with other non-pulpal pathologies. A case of extra-oral submental sinus tract that was initially misdiagnosed by a physician as a non-odontogenic lesion is presented. Facial fistulas of endodontic origin, despite sparse, should be considered as an option in the differential diagnosis procedure. It is important that interaction occurs between physicians and dentists to avoid exposing patients to insufficient treatment schemes.

The influence of different power settings of Nd:YAG laser irradiation, bioglass and combination to the occlusion of dentinal tubules.

OBJECTIVE: The purpose of this study was to investigate the influence of bioglass, Nd:YAG laser irradiation and their combination on dentinal tubuli occlusion as a potential dentinal hypersensitivity treatment for cervical dentinal hypersensitivity (CDH). BACKGROUND DATA: CDH affects 8-30% of adults and nearly 85% of perio-treated patients. Various treatment schemes have been applied for treating CDH, among them being fluoride application, laser irradiation, and, recently, bioglass (NovaMin(®)). In this in vitro study, we evaluated the efficacy of NovaMin(®) paste (NM) (Denshield, Sultan, USA), Nd:YAG laser irradiation (L) at various power settings, and their combination, on dentinal orifice occlusion (DOO) as potential treatments for CDH. METHODS: Forty-nine human dentin surfaces were organized into seven equal groups: groups A and B received NM followed by L (0.5 and 1 W, respectively); groups C and D received L (0.5 and 1 W, respectively) followed by NM; group E received NM; and groups F and G received L (0.5 and 1 W, respectively). Specimens were evaluated with regard to DOO under environmental scanning electron microscope. RESULTS: Treatment modality significantly affected DOO (p=0.012). Groups B and G scored higher DOO than the rest. By ordinal logistic regression (with boostrap standard errors), the combination of NM followed by 1 W Nd:YAG laser irradiation (group B) significantly (p<0.001) contributed to DOO, compared with groups A, C, D, E, and F. CONCLUSIONS: Under the limitations of this study, Nd:YAG laser irradiation at 1 W, alone or combined with NM, is a superior method for producing DOO, and may lead to an effective treatment modality for CDH.

Comparative in vitro antibacterial activity of six root canal sealers against Enterococcus faecalis and Proteus vulgaris.

AIM: To evaluate the antimicrobial properties of six endodontic sealers in unset and set states against Enterococcus faecalis and Proteus vulgaris. METHODS: Six endodontic sealers were investigated in the unset and set state against Enterococcus feacalis and Proteus vulgaris using agar diffusion and direct contact tests. RESULTS: The mean inhibition zones for agar diffusion tests with Enterococcus feacalis were 19 mm for AH-26, 11 mm for TopSeal and Roth 601, 1 mm for AH-Plus, and 0 mm for GuttaFlow and EndoREZ (Kruskal-Wallis, P < 0.001). The mean inhibition zones with Proteus vulgaris were 24 mm for Roth 601, 19 mm for TopSeal, 17 mm for AH-Plus, 16 mm for AH-26, and 0 mm for GuttaFlow and EndoREZ (Kruskal-Wallis, P < 0.001). Direct contact tests showed inhibition of both Enterococcus feacalis and Proteus vulgaris with AH-Plus, TopSeal, Roth 601, and AH-26 in the unset state. Only Roth 601 in the set state affected both the log and the stationary phase of Proteus vulgaris (logistic regression P < 0.001). CONCLUSIONS: With the exception of Roth 601, which retained its antimicrobial activity, the AH-Plus, TopSeal, and AH-26 sealers all demonstrated antimicrobial properties against Enterococcus feacalis and Proteus vulgaris that diminished when set. TopSeal significantly affected Enterococcus feacalis when compared with AH-Plus. GuttaFlow and EndoREZ expressed no antimicrobial activity.

In vitro evaluation of dentin tubule occlusion by Denshield and Neodymium-doped yttrium-aluminum-garnet laser irradiation.

INTRODUCTION: This in vitro study evaluated the efficacy of bioglass (Denshield; Novamin Technology, Alachua, FL) and Neodymium-doped yttrium-aluminum-garnet (Nd:YAG) laser irradiation on dentinal tubuli orifice occlusion (DOO) by comparing samples examined under environmental scanning electron microscope (ESEM) after applying each desensitizing approach separately and in combination. METHODS: Forty-eight human molars were collected, randomly organized in 4 equal groups, and had their cervical dentin exposed. Additionally, in half of the specimens of each experimental group, the smear layer was removed (subgroups A1, B1, C1, and D1). Group A received NovaMin paste treatment for 5 minutes (NM) to the experimental surface. Group B received Nd:YAG laser irradiation (0.5 w, 10 Hz, and 50 mJ) (L). Group C received NM followed by L. Group D was treated with L followed by NM. All specimens were stored for 24 hours and evaluated for DOO under ESEM by 4 blinded observers. RESULTS: The presence of a smear layer significantly contributed to DOO regardless of the treatment modality (ordinal logistic regression, P < .001). Compared with group A, all other treatments delivered significantly more occluded dentin orifices (P < .001 for groups B and D and P < .05 for group C). A layer formation was observed in subgroups C2 and D2. CONCLUSIONS: Under these experimental conditions, a smear layer was essential for successful DOO. Laser irradiation alone and combined with NovaMin proved superior to NovaMin alone on DOO. This combined approach has the potential to improve the outcome of treatment for cervical dentin hypersensitivity. The biological significance of this newly formed layer needs to be elucidated.

Prevalence of impacted teeth in a Greek population.

AIM: Τo determine the prevalence of impacted teeth in an adult Greek population, according to type, sex, and age. METHODS: The major source of data for this study was the orthopantomographic films and the physical examinations of 425 patients (202 males and 223 females) with impacted teeth. The elements that were examined and processed were relevant to the age, sex, total number of impacted teeth, and the type and frequency of impaction of each tooth. Moreover, the associated pathology, if any, of the impacted tooth was recorded. RESULTS: A total of 152 patients (35.8%) had one impacted tooth, 134 patients (31.5%) had two impacted teeth, and 139 patients (32.7%) had three or more impacted teeth; 777 (82.7%) impacted teeth revealed associated pathology. CONCLUSIONS: The third molars revealed the highest frequency of impaction (P<0.001); the number of impacted teeth of the mandible was larger than that of the maxilla (P<0.001), and the number of impacted anterior teeth in the maxilla was larger than that in the mandible (P<0.001). Cases of impacted posterior teeth were more numerous than anterior teeth (P<0.001). The majority of patients revealed pathological signs, which dictated the surgical removal of the impacted tooth/teeth.

Comparison of isthmus detection methods in the apical third of mesial roots of maxillary and mandibular first molars: macroscopic observation versus operating microscope.

The aims of this study were to assess the presence and the frequency of isthmuses in the mesial roots of the maxillary and mandibular first molars (at two resection levels from the apex), and to compare the findings obtained by macroscopic observation (MO) and operating microscope (OM). Forty maxillary and 40 mandibular mesial roots were observed at 3 and 5 mm from the apex initially macroscopically and then with the use of an OM. The presence of an isthmus and the number of root canals detected were recorded. Data were analyzed statistically by Fisher's exact test for isthmus evaluation and Wilcoxon signed rank-test for number of root canals at a confidence interval of 95%. Comparison between MO and OM regarding the number of roots with isthmuses provided the following results: Mandibular group: At 3 mm level: MO 19 ?s. OM 27; at 5 mm level: MO 31 ?s. OM 32. Maxillary group: At 3 mm level: MO 9 ?s. OM 14; at 5 mm level: MO 19 ?s. OM 21. Significant differences (p<0.05) were found concerning the accuracy of the isthmus detection methods at both resection levels (3 and 5 mm) and both types of roots, as well as for the number of the canals inspected under the OM between the two resection levels of the mesial roots of the maxillary first molars. Under the tested conditions, OM increased the diagnostic accuracy of isthmus detection at both resection levels and root types.

Comparison of isthmus detection methods in the apical third of mesial roots of maxillary and mandibular first molars: macroscopic observation versus operating microscope

The aims of this study were to assess the presence and the frequency of isthmuses in the mesial roots of the maxillary and mandibular first molars (at two resection levels from the apex), and to compare the findings obtained by macroscopic observation (MO) and operating microscope (OM). Forty maxillary and 40 mandibular mesial roots were observed at 3 and 5 mm from the apex initially macroscopically and then with the use of an OM. The presence of an isthmus and the number of root canals detected were recorded. Data were analyzed statistically by Fisher's exact test for isthmus evaluation and Wilcoxon signed rank-test for number of root canals at a confidence interval of 95 percent. Comparison between MO and OM regarding the number of roots with isthmuses provided the following results: Mandibular group: At 3 mm level: MO 19 ?s. OM 27; at 5 mm level: MO 31 ?s. OM 32. Maxillary group: At 3 mm level: MO 9 ?s. OM 14; at 5 mm level: MO 19 ?s. OM 21. Significant differences (p<0.05) were found concerning the accuracy of the isthmus detection methods at both resection levels (3 and 5 mm) and both types of roots, as well as for the number of the canals inspected under the OM between the two resection levels of the mesial roots of the maxillary first molars. Under the tested conditions, OM increased the diagnostic accuracy of isthmus detection at both resection levels and root types.

Os objetivos deste estudo foram avaliar a presença e a freqüência de istmos nas raízes mesiais de primeiros molares superiores e inferiores (em dois níveis de ressecção a partir do ápice), e comparar os achados obtidos por observação macroscópica (OM) e microscópio operativo (MO). Quarenta raízes mesiais superiores e inferiores foram examinadas a 3 e 5 mm do ápice, inicialmente macroscopicamente e em seguida com o uso do MO. A presença de istmo e o número de canais radiculares detectado foram registrados. Os dados foram analisados estatisticamente usando o teste exato de Fisher para avaliação do istmo e o teste de Wilcoxon (signed rank-test) para o número de canais radiculares, com um intervalo de confiança de 95 por cento. A comparação entre OM e MO com relação ao número de raízes com istmos forneceu os seguintes resultados: Grupo mandibular: 3 mm: OM 19 vs. MO 27; 5 mm: OM 31 vs. MO 32. Grupo maxilar: 3 mm: OM 9 vs. MO 14; 5 mm: OM 19 vs. MO 21. Diferenças significantes (p<0,05) foram encontradas com relação à precisão dos métodos de detecção de istmos em ambos os níveis de ressecção (3 e 5 mm), e ambos os tipos de raízes, bem como quanto ao número de canais radiculares inspecionados sob MO entre os dois níveis de ressecção das raízes mesiais dos primeiros molares superiores. Nas condições testadas, MO aumentou a precisão diagnóstica na detecção de istmos em ambos os níveis de ressecção e tipos de raízes.