Aqueous mixtures of cornstarch and Pluronic® F127 studied by experimental and computational techniques.

The possibility of interaction between cornstarch (CS) and amphiphilic molecules, such as the micelle-forming triblock copolymer Pluronic® F127 (F127), also known by Poloxamer 407, indicates that CS-F127 aqueous mixtures can regulate either the starch solubility or the copolymer micellization. Herein experimental and computational techniques were used to investigate CS-F127 aqueous mixtures aiming to highlight the role of these compounds on the molecular complexation. Dynamic light scattering results show that CS in water is highly polydisperse, while the F127 concentration and temperature influence the micellization process and the interaction with CS. Circular dichroism data of CS supernatants indicate the existence of small helical-like granules (Dh ≈ 800 nm) in the CS-F127 mixed aqueous solutions at 25 °C. UV-Vis spectrophotometry shows a small absorption band around 267 or 275 nm characteristic of micelles, granules, or molecular complexes, while FTIR and X-ray diffractometry indicate negligible structural changes. Lugol iodine tests at 25 °C show that both the precipitate and supernatant in the mixtures undergo some structural changes also indicating molecular complexation. Molecular dynamic simulations show the formation of stabilized inclusion complexes (V-amylose), where the propylene oxide segment of the copolymer inside the amylose helix and the ethylene oxide branches facing the aqueous media. These results together reveal weak CS-F127 interactions, evidencing a small solubility of CS both in the absence and presence of F127 as a solubilizing agent. Furthermore, moderate CS amounts do not change the F127 micelle structure.

Modulating the lipid profile of blastocyst cell membrane with DPPC multilamellar vesicles.

The aim of this study was to evaluate the effect of multilamellar vesicles (MLVs) of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) in co-culture with in vitro-produced bovine embryos (IVPEs). The stability of five concentrations of MLVs (1.0, 1.25, 1.5, 1.75, and 2.0 mM) produced using ultrapure water or embryonic culture medium with 24 or 48 h of incubation at 38.5 °C with 5% CO2 was assessed. In addition, the toxicity of MLVs and their modulation of the lipid profile of the plasma membrane of IVPEs were evaluated after 48 h of co-culture. Both media allowed the production of MLVs. Incubation (24 and 48 h) did not impair the MLV structure but affected the average diameter. The rate of blastocyst production was not reduced, demonstrating the nontoxicity of the MLVs even at 2.0 mmol/L. The lipid profile of the embryos was different depending on the MLV concentration. In comparison with control embryos, embryos cultured with MLVs at 2.0 mmol/L had a higher relative abundance of six lipid ions (m/z 720.6, 754.9, 759.0, 779.1, 781.2, and 797.3). This study sheds light on a new culture system in which the MLV concentration could change the lipid profile of the embryonic cell membrane in a dose-dependent manner.

Interactions of Lipid Polar Headgroups with Carbendazim Fungicide.

Carbendazim (MBC) is a fungicide widely used in agriculture which allows the high productivity of several cultures, a necessary condition considering the growing of the world population. Moreover, MBC has environmental impact mainly on the soil and water sources, and consequently, on animal and human lives. However, even though the toxicity of fungicides is well established, their action mechanism in cell membranes are not completely understood. Herein, we investigate the interaction of different polar headgroups: dimethyldioctadecylammonium bromide (DODAB), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG); and different chain unsaturation degrees DPPC, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) with MBC. Lipid monolayers at the air/water interface were applied as mimetic systems of cell membranes to investigate the interaction with MBC dissolved in the ultrapure water subphase. It was found that the interaction is driven preferably by electrostatic forces of the headgroups, with higher affinity for DODAB (cationic), intermediate for DPPC (zwitterionic), and absent for DPPG (anionic), considering the monolayer in the condensed phase. DODAB-MBC electrostatic interaction was consistent with FTIR (cast films). We also investigated giant unilamellar vesicles (GUVs) of zwitterionic lipids (DPPC, POPC, and DOPC) with distinct chain unsaturations in the presence of MBC by confocal microscopy and molecular dynamic (MD) simulations. The results indicate that, unlike the chain unsaturation, the polar headgroups play key role on the lipid-MBC interaction.

Dioctadecyldimethylammonium:monoolein nanocarriers for efficient in vitro gene silencing.

This study describes a novel liposomal formulation for siRNA delivery, based on the mixture of the neutral lipid monoolein (MO) and cationic lipids of the dioctadecyldimethylammonium (DODA) family. The cationic lipids dioctadecyldimethylammonium bromide (DODAB) and chloride (DODAC) were compared in order to identify which one will most efficiently induce gene silencing. MO has a fluidizing effect on DODAC and DODAB liposomes, although it was more homogeneously distributed in DODAC bilayers. All MO-based liposomal formulations were able to efficiently encapsulate siRNA. Stable lipoplexes of small size (100-160 nm) with a positive surface charge (>+45 mV) were formed. A more uniform MO incorporation in DODAC:MO may explain an increase of the fusogenic potential of these liposomes. The siRNA-lipoplexes were readily internalized by human nonsmall cell lung carcinoma (H1299) cells, in an energy dependent process. DODAB:MO nanocarriers showed a higher internalization efficiency in comparison to DODAC:MO lipoplexes, and were also more efficient in promoting gene silencing. MO had a similar gene silencing ability as the commonly used helper lipid 1,2-dioleyl-3-phosphatidylethanolamine (DOPE), but with much lower cytotoxicity. Taking in consideration all the results presented, DODAB:MO liposomes are the most promising tested formulation for systemic siRNA delivery.

Thermal and structural behavior of dioctadecyldimethylammonium bromide dispersions studied by differential scanning calorimetry and X-ray scattering.

Dioctadecyldimethylammonium bromide (DODAB) is a double chain cationic lipid, which assembles as bilayer structures in aqueous solution. The precise structures formed depend on, e.g., lipid concentration and temperature. We here combine differential scanning calorimetry (DSC) and X-ray scattering (SAXS and WAXS) to investigate the thermal and structural behavior of up to 120 mM DODAB in water within the temperature range 1-70 °C. Below 1 mM, this system is dominated by unilamellar vesicles (ULVs). Between 1 and 65 mM, ULVs and multilamellar structures (MLSs) co-exist, while above 65 mM, the MLSs are the preferred structure. Depending on temperature, DSC and X-ray data show that the vesicles can be either in the subgel (SG), gel, or liquid crystalline (LC) state, while the MLSs (with lattice distance d = 36.7 Å) consist of interdigitated lamellae in the SG state, and ULVs in the LC state (no Bragg peak). Critical temperatures related to the thermal transitions of these bilayer structures obtained in the heating and cooling modes are reported, together with the corresponding transition enthalpies.

Aggregation behavior of aqueous dioctadecyldimethylammonium bromide/monoolein mixtures: a multitechnique investigation on the influence of composition and temperature.

A recently described non-viral gene delivery system [dioctadecyldimethylammonium bromide (DODAB)/monoolein (MO)] has been studied in detail to improve knowledge on the interactions between lamellar (DODAB) and non-lamellar-forming (MO) lipids, as a means to enhance their final cell transfection efficiency. Indeed, the morphology, fluidity, and size of these cationic surfactant/neutral lipid mixtures play an important role in the ability of these systems to complex nucleic acids. The different techniques used in this work, namely dynamic light scattering (DLS), fluorescence spectroscopy, differential scanning calorimetry (DSC), cryogenic transmission electron microscopy (cryo-TEM), light microscopy (LM), and surface pressure-area isotherms, allowed fully characterization of the phase behavior and aggregate morphology of DODAB/MO mixtures at different molar ratios. Overall, the results indicate that the final morphology of DODAB/MO aggregates depends on the balance between the tendency of DODAB to form zero-curvature bilayer structures and the propensity of MO to form non-bilayer structures with negative curvature. These results also show that in the MO-rich region, an increase in temperature has a similar effect on aggregate morphology as an increase in MO concentration.

Plasmid DNA partitioning and separation using poly(ethylene glycol)/poly(acrylate)/salt aqueous two-phase systems.

Phase diagrams of poly(ethylene glycol)/polyacrylate/Na(2)SO(4) systems have been investigated with respect to polymer size and pH. Plasmid DNA from Escherichia coli can depending on pH and polymer molecular weight be directed to a poly(ethylene glycol) or to a polyacrylate-rich phase in an aqueous two-phase system formed by these polymers. Bovine serum albumin (BSA) and E. coli homogenate proteins can be directed opposite to the plasmid partitioning in these systems. Two bioseparation processes have been developed where in the final step the pDNA is partitioned to a salt-rich phase giving a total process yield of 60-70%. In one of them the pDNA is partitioned between the polyacrylate and PEG-phases in order to remove proteins. In a more simplified process the plasmid is partitioned to a PEG-phase and back-extracted into a Na(2)SO(4)-rich phase. The novel polyacrylate/PEG system allows a strong change of the partitioning between the phases with relatively small changes in composition or pH.

Interaction between Pluronic F127 and dioctadecyldimethylammonium bromide (DODAB) vesicles studied by differential scanning calorimetry.

A number of fundamental studies on the interactions between lipid bilayers and (ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide) copolymers (PEO-PPO-PEO, Pluronics) have been carried out recently as model systems for the complex behavior of cell membranes with this class of polymers often employed in pharmaceutical formulations. We report here a study by differential scanning calorimetry (DSC) of the interactions in water between Pluronic F127 (F127), and the cationic vesicles of di-n-octadecyldimethylammonium bromide (DODAB), as a function of concentration of the two components (DODAB 0.1 and 1.0 mM; F127 0.1 to 5.0 mM) and of the sample preparation protocol. The DSC studies follow the critical micellization temperature (cmt ≈ 27 °C at 1.0 mM) of F127 and the gel-liquid crystal transition (T(m) ≈ 45 °C) of the DODAB bilayer and of F127/DODAB mixtures. Upon heating past T(m), vesicle/polymer mixtures undergo an irreversible conversion into mixed DODAB/F127 micelles and/or F127-bearing vesicles, depending on the relative amount of each component, together with, in some cases, residual intact F127 micelles or DODAB vesicles. Sample preparation protocol is shown to have little impact on the composition of mixed systems once they are heated above T(m).

Kinetic asymmetry in the gel-liquid crystalline state transitions of DDAB vesicles studied by differential scanning calorimetry.

Didodecyldimethylammonium bromide (DDAB) (1.0 mM) vesicles in water were investigated by differential scanning calorimetry (DSC) to highlight the existing kinetic asymmetry in the gel-liquid crystalline (LC) state transitions. The experiments were performed in the range of temperature, scan rate and pre-scanning time 5-45 degrees C, 15-90 degrees C/h and 0-16 h, respectively, in the up- and down-scanning modes. Depending on the input parameters and number of heating-cooling cycles, the DSC thermograms exhibit a sharp peak, a broad band or a flat shape. A melting temperature T(m)=15.6-16.0 degrees C, given by the peak position, was obtained independently of the scan rate used in the up-scanning mode. The data reveal that DDAB vesicles exhibit much slower kinetics for the LC to gel state than for the opposite transition. Such an asymmetry is supported by: (a) the absence of peak for shorter pre-scanning times but longer scan rates, (b) the increasing intensity of the DSC peak with increasing pre-scanning time and decreasing scan rate, and (c) the complete absence of peak in the down-scan mode. Longer pre-scanning time, however, yields crystal precipitates due to a Krafft phenomenon, which also reduces the peak intensity. The overall results depend on whether the sample is fresh or not, that is, after some heating-cooling cycles, the melting peak requires a longer pre-scanning time to be detected. The kinetic asymmetry explains, for example, the lack of any DSC melting peak reported for "non-fresh" DDAB vesicles, which was as yet unexplained.

The role of counterion on the thermotropic phase behavior of DODAB and DODAC vesicles.

Dioctadecyldimethylammonium bromide and chloride surfactants (DODAX, X representing Br(-) or Cl(-) counterions) assemble in water, above their melting temperatures (T(m)), as cationic unilamellar vesicles at the typical surfactant concentration of 1.0mM. The larger T(m) of DODAC (49 degrees C) relative to DODAB (45 degrees C) has been attributed to the differing affinity and binding specificity of the counterions to the vesicle interfaces. In this communication it is reported differential scanning calorimetry (DSC), conductimetry and dynamic light scattering (DLS) data for mixtures of DODAB and DODAC in water at 1.0mM total surfactant concentration and varying surfactant concentration, to investigate the effect of counterion on the pre-, main- and post-transition temperatures (T(s), T(m) and T(p)), and the data compared to the neat surfactants in water. Accordingly, T(m) increases sigmoidally from 45.8 to 48.9 degrees C when DODAC molar fraction (x(DODAC)) is varied from 0 to 1. Neat DODAB exhibits in addition to T(m), T(s) and T(p) that are inhibited by DODAC. The main peak width DeltaT(1/2) does not depend on the surfactant molar fraction but the melting enthalpy change DeltaH is smaller for DODAB-rich dispersions due to the stronger affinity of Br(-). The conductivity and the apparent hydrodynamic diameter as well do not vary much with x(DODAB), indicating that the surface charge density is similar for DODAB and DODAC, evidencing the role of the counterion binding specificity and affinity on the properties of DODAX vesicles.

Extruded vesicles of dioctadecyldimethylammonium bromide and chloride investigated by light scattering and cryogenic transmission electron microscopy.

Combined dynamic and static light scattering (DLS, SLS) and cryogenic transmission electron microscopy (cryo-TEM) were used to investigate extruded cationic vesicles of dioctadecyldimethylammonium chloride and bromide (DODAX, X being Cl(-) or Br(-)). In salt-free dispersions the mean hydrodynamic diameter, D(h), and the weight average molecular weight, M(w), are larger for DODAB than for DODAC vesicles, and both D(h) and M(w) increase with the diameter (varphi) of the extrusion filter. NaCl (NaBr) decreases (increases) the DODAB (DODAC) vesicle size, reflecting the general trend of DODAB to assemble as larger vesicles than DODAC. The polydispersity index is lower than 0.25, indicating the dispersions are rather polydisperse. Cryo-TEM micrographs show that the smaller vesicles are spherical while the larger ones are oblong or faceted, and the vesicle samples are fairly polydisperse in size and morphology. They also indicate that the vesicle size increases with phi and DODAB assembles as larger vesicles than DODAC. Lens-shaped vesicles were observed in the extruded preparations. Both light scattering and cryo-TEM indicate that the vesicle size is larger or smaller than phi when phi is smaller or larger than the optimal phi approximately 200 nm.

Spontaneous vesicles of sodium dihexadecylphosphate in HEPES buffer.

The formation of spontaneous vesicles of dihexadecylphosphate (DHP) in a HEPES buffered solution at pH 7.4, the size, morphology and melting temperature, obtained by cryogenic transmission electron microscopy (cryo-TEM) and differential scanning calorimetry (DSC), are reported. The vesicles were formed by simply mixing a 5.0 mM lipid-solvent mixture at a temperature (75 degrees C) safely above the higher melting temperature T(m)=70.4 degrees C of DHP. The vesicle diameter ranges from 100 to 332 nm and their geometry is spherical, faceted or oblong. T(m) increases from 66.8 to 70.4 as DHP concentration is raised from 0.6 to 5.0 mM.

Protein partitioning in poly(ethylene glycol)/sodium polyacrylate aqueous two-phase systems.

The partition of hemoglobin, lysozyme and glucose-6-phosphate dehydrogenase (G6PDH) in a novel inexpensive aqueous two-phase system (ATPS) composed by poly(ethylene glycol) (PEG) and sodium polyacrylate (NaPA) has been studied. The effect of NaCl and Na(2)SO(4), pH and PEG molecular size on the partitioning has been studied. At high pH (above 9), hemoglobin partitions strongly to the PEG-phase. Although some precipitation of hemoglobin occurs, high recovery values are obtained particularly for lysozyme and G6PDH. The partitioning forces are dominated by the hydrophobic and electrochemical (salt) effects, since the positively charged lysozyme and negatively charged G6PDH partitions to the non-charged PEG and the strongly negatively charged polyacrylate enriched phase, respectively.

Vesicle-micelle transition in aqueous mixtures of the cationic dioctadecyldimethylammonium and octadecyltrimethylammonium bromide surfactants.

The vesicle-micelle transition in aqueous mixtures of dioctadecyldimethylammonium and octadecyltrimethylammonium bromide (DODAB and C(18)TAB) cationic surfactants, having respectively double and single chain, was investigated by differential scanning calorimetry (DSC), steady-state fluorescence, dynamic light scattering (DLS) and surface tension. The experiments performed at constant total surfactant concentration, up to 1.0 mM, reveal that these homologous surfactants mix together to form mixed vesicles and/or micelles, depending on the relative amount of the surfactants. The melting temperature T(m) of the mixed DODAB-C(18)TAB vesicles is larger than that for the neat DODAB in water owing to the incorporation of C(18)TAB in the vesicle bilayer. The surface tension decreases sigmoidally with C(18)TAB concentration and the inflection point lies around x(DODAB) approximately 0.4, indicating the onset of micelle formation owing to saturation of DODAB vesicles by C(18)TAB molecules. When x(DODAB)>0.5 C(18)TAB molecules are mainly solubilised by the vesicles, but when x(DODAB)<0.25 micelles are dominant. Fluorescence data of the Nile Red probe incorporated in the system at different surfactant molar fractions indicate the formation of micelle and vesicle structures. These structures have apparent hydrodynamic radius R(H) of about 180 and 500-800 nm, respectively, as obtained by DLS measurements.

Dispersed lipid liquid crystalline phases stabilized by a hydrophobically modified cellulose.

Aqueous dispersions of monoolein (MO) with a commercial hydrophobically modified ethyl hydroxyethyl cellulose ether (HMEHEC) have been investigated with respect to the morphologies of the liquid crystalline nanoparticles. Only very low proportions of HMEHEC are accepted in the cubic and lamellar phases of the monoolein-water system. Due to the broad variation of composition and size of the commercial polymer, no other single-phase regions were found in the quasi-ternary system. Interactions of MO with different fractions of the HMEHEC sample induced the formation of lamellar and reversed hexagonal phases, identified from SAXD, polarization microscopy, and cryogenic TEM examinations. In excess water (more than 90 wt %) coarse dispersions are formed more or less spontaneously, containing particles of cubic phase from a size visible by the naked eye to small particles observed by cryoTEM. At high polymer/MO ratios, vesicles were frequently observed, often oligo-lamellar with inter-lamellar connections. After homogenization of the coarse dispersions in a microfluidizer, the large particles disappeared, apparently replaced by smaller cubic particles, often with vesicular attachments on the surfaces, and by vesicles or vesicular particles with a disordered interior. At the largest polymer contents no proper cubic particles were found directly after homogenization but mainly single-walled defected vesicles with a peculiar edgy appearance. During storage for 2 weeks, the dispersed particles changed toward more well-shaped cubic particles, even in dispersions with the highest polymer contents. In some of the samples with low polymer/MO ratio, dispersed particles of the reversed hexagonal type were found. A few of the homogenized samples were freeze-dried and rehydrated. Particles of essentially the same types, but with a less well-developed cubic character, were found after this treatment.

Vesicle-micelle transition in mixtures of dioctadecyldimethylammonium chloride and bromide with nonionic and zwitterionic surfactants.

We have investigated the effect of mixing spontaneously formed dispersions of the cationic vesicle-forming dioctadecyldimethylammonium chloride and bromide (DODAX, with X being anions Cl- (C) or Br- (B)) with solutions of the micelle-forming nonionic ethylene oxide surfactants penta-, hepta-, and octaethyleneglycol mono-n-dodecyl ether, C12E(n) (n = 5, 7, and 8), and the zwitterionic 3-(N-hexadecyl-N,N-dimethylammonio)propane sulfonate (HPS). We used for this purpose differential scanning calorimetry (DSC), turbidity, and steady-state fluorescence spectroscopy to investigate the vesicle-micelle (V-M) transition yielded by adding C12E(n) and HPS to 1.0 mM vesicle dispersions of DODAC and DODAB. The addition of these surfactants lowers the gel-to-liquid crystalline phase transition temperature (T(m)) of DODAC and DODAB, and the transition becomes less cooperative, that is, the thermogram transition peak shifts to lower temperature and broadens to disappear when the V-M transition is complete, the vesicle bilayer becomes less organized, and the T(m) decreases, in agreement with measurements of the fluorescence quantum yield of trans-diphenylpolyene (t-DPO) fluorescence molecules incorporated in the vesicle bilayer. Turbidity data indicate that the V-M transition comes about in three stages: first surfactants are solubilized into the vesicle bilayer; after saturation, the vesicles are ruptured, and, finally, the vesicles are completely solubilized and only mixed micelles are formed. The critical points of bilayer saturation and vesicle solubilization were obtained from the turbidity and fluorescence curves, and are reported in this communication. The solubility of DODAX is stronger for C12E(n) than it is for HPS, meaning that C12E(n) solubilizes DODAX more efficiently than does HPS. The surfactant solubilization depends slightly on the counterion, and varies according to the sequence C12E5 > C12E7 > C12E8 > HPS.

Cationic liposomes in mixed didodecyldimethylammonium bromide and dioctadecyldimethylammonium bromide aqueous dispersions studied by differential scanning calorimetry, Nile Red fluorescence, and turbidity.

The thermotropic phase behavior of cationic liposomes in mixtures of two of the most investigated liposome-forming double-chain lipids, dioctadecyldimethylammonium bromide (DODAB) and didodecyldimethylammonium bromide (DDAB), was investigated by differential scanning calorimetry (DSC), turbidity, and Nile Red fluorescence. The dispersions were investigated at 1.0 mM total surfactant concentration and varying DODAB and DDAB concentrations. The gel to liquid-crystalline phase transition temperatures (Tm) of neat DDAB and DODAB in aqueous dispersions are around 16 and 43 degrees C, respectively, and we aim to investigate the Tm behavior for mixtures of these cationic lipids. Overall, DDAB reduces the Tm of DODAB, the transition temperature depending on the DDAB content, but the Tm of DDAB is roughly independent of the DODAB concentration. Both DSC and fluorescence measurements show that, within the mixture, at room temperature (ca. 22 degrees C), the DDAB-rich liposomes are in the liquid-crystalline state, whereas the DODAB-rich liposomes are in the gel state. DSC results point to a higher affinity of DDAB for DODAB liposomes than the reverse, resulting in two populations of mixed DDAB/DODAB liposomes with distinctive phase behavior. Fluorescence measurements also show that the presence of a small amount of DODAB in DDAB-rich liposomes causes a pronounced effect in Nile Red emission, due to the increase in liposome size, as inferred from turbidity results.

Structural organization of cetyltrimethylammonium sulfate in aqueous solution: The effect of Na2SO4.

We used dynamic light scattering (DLS), steady-state fluorescence, time resolved fluorescence quenching (TRFQ), tensiometry, conductimetry, and isothermal titration calorimetry (ITC) to investigate the self-assembly of the cationic surfactant cetyltrimethylammonium sulfate (CTAS) in aqueous solution, which has SO(2-)4 as divalent counterion. We obtained the critical micelle concentration (cmc), aggregation number (N(agg)), area per monomer (a0), hydrodynamic radius (R(H)), and degree of counterion dissociation (alpha) of CTAS micelles in the absence and presence of up to 1 M Na2SO4 and at temperatures of 25 and 40 degrees C. Between 0.01 and 0.3 M salt the hydrodynamic radius of CTAS micelle R(H) approximately 16 A is roughly independent on Na2SO4 concentration; below and above this concentration range R(H) increases steeply with the salt concentration, indicating micelle structure transition, from spherical to rod-like structures. R(H) increases only slightly as temperature increases from 25 to 40 degrees C, and the cmc decreases initially very steeply with Na2SO4 concentration up to about 10 mM, and thereafter it is constant. The area per surfactant at the water/air interface, a0, initially increases steeply with Na2SO4 concentration, and then decreases above ca. 10 mM. Conductimetry gives alpha = 0.18 for the degree of counterion dissociation, and N(agg) obtained by fluorescence methods increases with surfactant concentration but it is roughly independent of up to 80 mM salt. The ITC data yield cmc of 0.22 mM in water, and the calculated enthalpy change of micelle formation, Delta H(mic) = 3.8 kJ mol(-1), Gibbs free energy of micellization of surfactant molecules, Delta G(mic) = -38.0 kJ mol(-1) and entropy TDelta S(mic) = 41.7 kJ mol(-1) indicate that the formation of CTAS micelles is entropy-driven.

Unilamellar vesicles obtained by simply mixing dioctadecyldimethylammonium chloride and bromide with water.

Optically clear dispersions of dioctadecyldimethylammonium bromide and chloride (DODAX, X = Br-, Cl-) in water can be obtained by simply mixing the amphiphiles at low concentrations (1 mM) and at a temperature safely above the gel to liquid crystalline phase transition temperature (Tm approximately 45-48 degrees C) of DODAX in water. Under these conditions, dynamic light scattering shows that, at room temperature, the dispersions contain two well-defined populations of large vesicles with average hydrodynamic radii (R(H)) of 80 and 337 nm for DODAB and of 69 and 247 nm for DODAC. Cryo-transmission electron microscopy (cryo-TEM) micrographs show that DODAX vesicles are unilamellar and polydisperse with apparent radius up to 800 nm. The vesicles are stable for at least 1 month according to the ageing time-dependence of the turbidity and molar absorption coefficient.

Dioctadecyldimethylammonium bromide vesicles prepared by the surfactant removal method.

Dioctadecyldimethylammonium bromide (DODAB) is a double chain vesicle-forming cationic surfactant, whereas octa-ethyleneglycol mono-n-dodecyl ether (C12E8) is a single chain micelle-forming nonionic surfactant. At room temperature (ca. 22 degrees C) C12E8 molecules self-assemble in water as micelles while DODAB is insoluble. A mixture of DODAB and C12E8, however, can be soluble in water at room temperature depending on the relative amount of the compounds. We report the formation of small unilamellar vesicles (SUVs) by dialyzing at room temperature a mixture of 1.0 mM DODAB with 10 mM C12E8 in water. Extended bilayers are formed as well in equilibrium with vesicles. Such structures are viewed by a cryogenic transmission electron microscopy (cryo-TEM) image.