Cellulose nanocrystals-reinforced core-shell hydrogels for sustained release of fertilizer and water retention.

Core-shell (CS) hydrogels show great potential for the controlled release of fertilizers. In this work, we prepared an alginate-coated gelatin-cellulose nanocrystals (CNCs) hydrogel by a simple layer-by-layer process. CNCs were prepared from cotton linter fibers by the sulfuric acid process. They were incorporated into the gelatin hydrogel, and an external alginate membrane was applied to the inner membrane. Compared to neat gelatin hydrogel, the compressive modulus of the nanocomposite with 5.0 wt% CNCs was enhanced by 288 %. In addition, the CS hydrogel showed a slow-release property and better water retention capacity than neat gelatin hydrogel. The main results of this work are listed below: compression test revealed that the addition of the CNC increases the mechanical properties of the hydrogel, and ii) the addition of a second layer of alginate to CNC-reinforced gelatin hydrogel increase the water retention and improve the sustained release of fertilizer. Our study provides easy and green routes to produce CS hydrogels for potential agricultural applications.

Dual responsive dextran-graft-poly (N-isopropylacrylamide)/doxorubicin prodrug via Schiff base reaction.

Stimulus-responsive nanoparticles stand out in studies for cancer treatment since these systems can promote a selective release of the drug in tumor tissues and cells, minimizing the effects caused by conventional chemotherapy. Dextran-graft-poly (N-isopropylacrylamide) copolymers were synthesized via Schiff base formation. The synthesis of copolymers was confirmed by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (NMR) and the analyses of dynamic light scattering (DLS) showed that the copolymers were thermal and pH dual-responsive. The chemotherapy drug doxorubicin (DOX) was conjugated to the copolymers via Schiff base formation, obtaining nanoparticles by self-assembling with size smaller than 130 nm. A higher percentage of doxorubicin was released at pH 5.0 (59.1 ± 2.1%) compared to physiological pH (34.9 ± 4.8%), confirming a pH-sensitive release profile. The in vitro cytotoxicity assay demonstrated that DOX-loaded nanoparticles can inhibit cancer cell proliferation and promote reduced cytotoxicity in non-tumor cells. The D45kP30k-DOX nanoparticles induced morphological changes in HCT-116 cells suggesting cell death and the cell uptake assay indicated that the nanoparticles can be internalized by endocytosis. Therefore, DOX-loaded nanoparticles exhibited potential as smart systems for cancer treatment.

Protective effect against gastric mucosa injury of a sulfated agaran from Acanthophora spicifera.

In this study, a polysaccharide from marine alga Acanthophora spicifera (PAs) was isolated and structurally characterized. Its protective potential against chemically-induced gastric mucosa injury was evaluated. The gel permeation chromatography experiments and spectroscopy spectrum showed that PAs is a sulfated polysaccharide with a high molecular mass (6.98 × 105g/mol) and degree of sulfation of 1.23, exhibiting structural characteristic typical of an agar-type polysaccharide. Experimental results demonstrated that PAs reduced the hemorrhagic gastric injury, in a dose-dependent manner. Additionally, PAs reduced the intense gastric oxidative stress, measured by glutathione (GSH) and malondialdehyde (MDA) levels. PAs also prevented the reduction of mucus levels adhered to the gastric mucosa, promoted by the aggressive effect of ethanol. In summary, the sulfated polysaccharide from A. spicifera protected the gastric mucosa through the prevention of lipid peroxidation and enhanced the defense mechanisms of the gastric mucosa, suggesting as a promising functional food as gastroprotective agent.

Poly(ε-caprolactone) grafted cashew gum nanoparticles as an epirubicin delivery system.

Polysaccharide based copolymers have been the focus of several research, particularly for the development of drug delivery systems. This study reports on the preparation of nanoparticles from an amphiphilic copolymer obtained by the poly(ε-caprolactone) graft in the structure of cashew gum, via ring-opening polymerization. The synthesis of copolymers was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance. The copolymers exhibit self-organization capability in water, with critical association concentration of 42 and 50 µg mL-1. The nanoparticle hydrodynamic diameters (212 and 202 nm) revealed a decreasing trend with increasing poly(ε-caprolactone) graft percentage. Epirubicin was used as an anticancer drug model and incorporated into the nanoparticles. The encapsulation efficiency reached 50% and 5.0% drug load. Nanoparticles showed an epirubicin controlled release profile, with maximum release of 93.0 ± 4.0% in 72 h, as well as excellent biocompatibility, according to hemolysis and cytotoxicity assays.

Poly(N-isopropylacrylamide)/galactomannan from Delonix regia seed thermal responsive graft copolymer via Schiff base reaction.

Aminated poly(N-isopropylacrylamide) (PNIPAm-NH2) was grafted onto oxidized galactomannan polysaccharide extracted from Delonix regia (OXGM) via Schiff base reaction by a simple, rapid synthetic route, deprived of the use of organic solvents. Grafting was confirmed by FTIR and 1H NMR and the self-organizing ability of the obtained nanoparticle copolymers was investigated by dynamic light scattering (DLS). The minimum concentration required for self-organization (CAC) at 25 °C was higher than at 50 °C. Lower critical solution temperature (LCST) was in the range 34-40 °C, depending on both inserted PNIPAm-NH2 molar mass and on the presence of reduced imine bond. Synthesized copolymers are promising candidates for drug delivery as they show good cell viability, particle size around 250 nm and transition temperature closer to that of human body. Reaction success points out to the possibility of use free aldehyde groups of oxidized polysaccharide, not used in the copolymerization, to form a pro-drug with substances that possess NH2 groups in their structure, such as doxorubicin.

Influence of galactomannan molar mass on particle size galactomannan-grafted-poly-N-isopropylacrylamide copolymers.

In order to synthesize nanoparticles of galactomannan-g-poly-N-isopropylacrylamide copolymers, galactomannan from fava d'anta was partially hydrolyzed using hydrochloric acid. Degradation reduced the molar mass and increase mannose/galactose molar ratio. This study shows that high molar mass of galatomannan lead to formation of copolymers with particle size in the order of micrometer, however reducing molar mass from 106 to 104 g mol-1, thermo-sensitive copolymer with low critical aggregation concentration, transition temperature close to body temperature (37 °C) and particle size in the range of 300-170 nm can be obtained. As a proof of concept, partially degraded galactomannan-g-NIPAm copolymer was used to incorporated indomethacin. Good encapsulation efficiency and a controlled release were observed indicating that this material has potential to be used as nanocarrier system.

Self-assembling cashew gum-graft-polylactide copolymer nanoparticles as a potential amphotericin B delivery matrix.

Amphotericin B is an antibiotic used in the treatment of fungal disease and leishmania; however, it exhibits side effects to patients, hindering its wider application. Therefore, nanocarriers have been investigated as delivery systems for amphotericin B (AMB) in order to decrease its toxicity, besides increase bioavailability and solubility. Amphiphilic copolymers are interesting materials to encapsulate hydrophobic drugs such as AMB, hence copolymers of cashew gum (CG) and l-lactide (LA) were synthesized using two different CG:LA molar ratios (1:1 and 1:10). Data obtained revealed that copolymer nanoparticles present similar figures for particle sizes and zeta potentials; however, particle size of encapsulated AMB increases if compared to unloaded nanoparticles. The 1:10 nanoparticle sample has better stability although higher polydispersity index (PDI) if compared to 1:1 sample. High amphotericin (AMB) encapsulation efficiencies and low hemolysis were obtained. AMB loaded copolymers show lower aggregation pattern than commercial AMB solution. AMB loaded nanoparticles show antifungal activities against four C. albicans strains. It can be inferred that cashew gum/polylactide copolymers have potential as nanocarrier systems for AMB.

Development of amphotericin B-loaded propionate Sterculia striata polysaccharide nanocarrier.

This work was aimed at the production and characterization of a new nanocarrier based on a Sterculia striata polysaccharide (SSP) modified via acylation reaction with propionic anhydride. Nanocapsules of propionated SSP (PSSP) were produced via spontaneous nanoemulsification process and tested as a potential amphotericin B (AMB) nanocarrier. Stable nanoparticles with a very low polydispersity index (0.08-0.29) and high zeta potential (ζ -42.7 to -53.8 mV) were obtained. Particle size was dependent on the degree of substitution and ranged from 205 to 286 nm. A nanocapsule with a degree of substitution (DS) of 2.53 (NCP 2.53) was selected for encapsulation, biocompatibility, and antifungal evaluation against Candida albicans strains. A maximum of 98.3% AMB encapsulation was achieved. Encapsulated AMB was in its monomeric form and showed good biocompatibility and antifungal activity against four C. albicans strains. Data indicate that PSSP has potential as a nanocarrier system for AMB.

Synthesis and characterization of non-toxic and thermo-sensitive poly(N-isopropylacrylamide)-grafted cashew gum nanoparticles as a potential epirubicin delivery matrix.

Cashew gum (CG) was grafted with N-isopropylacrylamide (NIPA) by radical polymerization to originate a stimuli-sensitive copolymer for drug delivery purposes. NMR and IR spectroscopy confirmed the insertion of NIPA onto the cashew gum chains. The graft copolymer (CG:NIPA) demonstrated thermal responsiveness. The critical aggregation concentration of the copolymers at 25°C was higher than at 50°C. At temperatures lower than the LCST, the nanoparticle size ranged from 12 to 21nm, depending on the CG:NIPA ratio, but above the LCST the particles aggregated, increasing the particle size. Regarding the potential for future oral application, the nanoparticles showed no cytotoxic activity against the Caco-2 and HT29-MTX intestine cell lines. Epirubicin was encapsulated into nanoparticles of CG-NIPA (1:1), resulting in a 64% association efficiency and 22% loading capacity. Thus, the CG:NIPA graft copolymer demonstrates good potential for used in controlled drug delivery systems.

Sulfated polysaccharide fraction from marine algae Solieria filiformis: Structural characterization, gastroprotective and antioxidant effects.

A sulfated polysaccharide (SFP) fraction from the marine alga Solieria filiformis was extracted and submitted to microanalysis, molar mass estimation and spectroscopic analysis. We evaluated its gastroprotective potential in vivo in an ethanol-induced gastric damage model and its in vitro antioxidant properties (DPPH, chelating ferrous ability and total antioxidant capacity). Its chemical composition revealed to be essentially an iota-carrageenan with a molar mass of 210.9kDa and high degree of substitution for sulfate groups (1.08). In vivo, SFP significantly (P<0.05) reduced, in a dose dependent manner, the ethanol-induced gastric damage. SFP prevents glutathione consume and increase of malondialdehyde and hemoglobin levels. SFP presented an IC50 of 1.77mg/mL in scavenging DPPH. The chelating ferrous ability was 38.98%, and the total antioxidant capacity was 2.01mg/mL. Thus, SFP prevents the development of ethanol-induced gastric damage by reducing oxidative stress in vivo and possesses relevant antioxidant activity in vitro.

Structural characteristics are crucial to the benefits of guar gum in experimental osteoarthritis.

Protein-free guar gum (DGG) was oxidized (DGGOX) or sulfated (DGGSU) by insertion of new groups in C-6 (manose) and C-6 (galactose), for DGGOX and DGGSU, respectively. Rats were subjected to anterior cruciate ligament transection (ACLT) of the knee, joint pain recorded using the articular incapacitation test, and the analgesic effect of intraarticular 100µg DGG, DGGOX or DGGSU solutions at days 4-7 was evaluated. Other groups received DGG or saline weekly, from days 7 to 70 and joint damage assessed using histology and biochemistry as the chondroitin sulfate (CS) content of cartilage. The molar mass of CS samples was obtained by comparing their relative electrophoretic mobility to standard CS. DGG but not DGGOX or DGGSU significantly inhibited joint pain. DGG significantly reversed the increase in CS, its reduced electrophoretic mobility, and histological changes following ACLT, as compared to vehicle. Structural integrity accounts for DGG benefits in experimental osteoarthritis.

Chitosan/Sterculia striata polysaccharides nanocomplex as a potential chloroquine drug release device.

Nanoparticles are produced by means of polyelectrolyte complexation (PEC) of oppositely charged polycationic chitosan (CH) with polyanionic polysaccharide extracted from Sterculia striata exudates (rhamnogalacturonoglycan (RG)-type polysaccharide). The nanoparticles formed with low-molar-mass CH are larger than those formed with high-molar-mass CH. This behavior is in contrast with that previously observed for other systems and may be attributed to different mechanisms related to the association of CH with RG of higher persistence length chain than that of CH. Nanoparticles harnessed with a charge ratio (n(+)/n(-)) of <1 are smaller than particles with an excess of polycations. Particles with hydrodynamic sizes smaller than 100nm are achieved using a polyelectrolyte concentration of 10(-4)gmL(-1) and charge ratio (n(+)/n(-)) of <1. The CH/RG nanoparticles are associated with chloroquine (CQ) with an efficiency of 28% and release it for up to ∼60% within ∼10h, whereas in the latter, only ∼40% of the CQ was released after 24h. The main factor that influenced drug release rate is the nanoparticle charge ratio.

Self-assembled nanoparticles of acetylated cashew gum: characterization and evaluation as potential drug carrier.

Acetylated cashew gum (ACG) was synthesized and self-assembled nanoparticles were obtained through the dialysis of an organic solution (DMSO) against a non-solvent (water). The ACG was characterized by infrared spectroscopy. The degree of substitution was 2.8 as determined by NMR spectroscopy. The physicochemical properties of the self-assembled nanoparticles in aqueous media were characterized by DLS, SEM and fluorescence spectroscopy. The mean diameter of the self-assembled nanoparticles obtained was 179 nm and the critical aggregation concentration (CAC) in water was 2.1×10(-3) g/L. Indomethacin (IND) was used as a hydrophobic model drug and was incorporated into the hydrophobized polysaccharide. Both loaded and unloaded nanoparticles were found to be spherical with diameters in the ranges of 70-170 nm and 108-314 nm (determined by SEM), respectively. Controlled drug release was observed for up to 72 h.

Improvement of polyvinyl alcohol properties by adding nanocrystalline cellulose isolated from banana pseudostems.

Cellulose nanocrystals (CNCs) isolated from banana pseudostems fibers (BPF) of the Pacovan variety were used as fillers in a polyvinyl alcohol (PVOH) matrix to yield a nanocomposite. The fibers from the external fractions of the BPF were alkaline bleached and hydrolyzed under acidic conditions (H2SO4 62% w/w, 70 min, 45 °C) to obtain CNCs with a length (L) of 135.0 ± 12.0 nm and a diameter (D) of 7.2 ± 1.9 nm to yield an aspect ratio (L/D) of 21.2. The CNCs were applied to PVOH films at different concentrations (0%, 1%, 3%, and 5% w/w, dry basis). With higher concentrations of CNCs, the water-vapor barrier of the films increased, while the optical properties changed very little. Increasing the concentration of the CNCs up to 3% significantly improved the mechanical properties of the nanocomposite.

A novel green approach for the preparation of cellulose nanowhiskers from white coir.

The aim of this work was to optimize the extraction of cellulose nanowhiskers (CNW) from unripe coconut husk fibers (CHF). The CHF was delignified using organosolv process, followed by alkaline bleaching (5% (w/w) H2O2+4% (w/w) NaOH; 50°C, 90 min). The CHF was subsequently hydrolyzed with 30% (v/v) sulfuric acid (60°C, 360 min). The process yielded a partially delignified acetosolv cellulose pulp and acetic black liquor, from which the lignin was recovered. The CNW from the acetosolv pulp exhibited an average length of 172±88 nm and a diameter of 8±3 nm, (aspect ratio of 22±8). The surface charge of the CNW was -33 mV, indicating a stable aqueous colloidal suspension. The nanocrystals presented physical characteristics close to those extracted from cellulose pulp made by CHF chlorine-pulping. This approach offers the additional advantage of extracting the lignin as an alternative to eradication.

Polysaccharide isolated from Agardhiella ramosissima: chemical structure and anti-inflammation activity.

The sulfated polysaccharide (PLS) fraction of Agardhiella ramosissima was characterized by microanalysis, infrared spectroscopy, NMR and gas-liquid-chromatography-mass-spectrometry. The main constituent of PLS was the ι carrageenan. The monosaccharide composition of the PLS showed galactose, 3,6-anhydrogalactose and 6-O-methylgalactose. The PLS (30 mg kg(-1)) significantly reduced the paw oedema induced by carrageenan, dextran, histamine and serotonin and also was able to significantly inhibit leucocyte migration into the peritoneal cavity and decrease the concentration of myeloperoxidase (MPO) in paw tissue. In the antinociceptive tests, the pre-treatment with PLS reduced the number of writhes, the licking time but did not increase the latency time of response. This study demonstrates for the first time the anti-inflammatory and anti-nociceptive effects of PLS from A. ramosissima. Thus, we concluded that PLS could be a new natural tool in pain and acute inflammatory conditions.

Sulfated chitosan as tear substitute with no antimicrobial activity.

Chitosan of high molar mass and with 82% deacetylation was sulfated using two procedures and characterized. In the first method sample chitosan-S1 was produced using chlorosulfonic acid as the sulfating agent and N,N-dimethylformamide as the medium, and in the second method (chitosan-S2) formic acid was also used. The degrees of sulfation were 0.87 (chitosan-S1) and 0.67 (chitosan-S2). FTIR spectra showed bands at 1230, 800 and 580 cm(-1), attributed to sulfation. Moisture content followed the order: chitosan-S-0.87>chitosan-S-0.67>chitosan. Chain depolymerization was verified by GPC. Aqueous solutions showed pseudoplastic behavior and the viscosity at a concentration of 0.3% (w/v) was higher than that of healthy human tears (close to 3 mPas at shear rate 130 s(-1)). Substitutions in the C2NH and in C6OH groups were verified by NMR. Antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa was not observed. Considering that chitosan-S-0.67 had a higher solubility, less chain depolymerization, higher yield and better thermal stability in comparison with chitosan-S-0.87, the derivative with DS 0.67 offered the greatest potential for use in formulations of tear substitutes.

Structural characterization of polysaccharide obtained from red seaweed Gracilaria caudata (J Agardh).

Seaweeds are considered an important source of bioactive molecules. In this work the marine red alga Gracilaria caudata was submitted to aqueous extraction of their polysaccharides for 2 h at 100 °C. The polysaccharide fraction (PGC) presented a recovery of 32.8%. The sulfate content of PGC, calculated by S%, is 1 ± 0.2% and the degree of sulfation accounts for 0.13 ± 0.2. High-Performance Size-Exclusion Chromatography demonstrated that PGC consists of a high molecular weight polysaccharide (2.5 × 10(5)gmol(-1)). Chemical analysis of PGC was performed by microanalysis, infrared (FT-IR) and nuclear magnetic resonance (NMR, 1 and 2D) spectroscopy. The structure of PGC is mainly constituted by the alternating residues 3-linked-ß-D-galactopyranose and 4-linked-3,6-α-L-anhydrogalactose; however some hydroxyl groups were substituted by methyl groups and pyruvic acid acetal. The biological precursor of 3,6-α-L-anhydrogalactose (6-sulfate-α-l-galactose) was also detected.

Polysaccharide isolated from Passiflora edulis: Characterization and antitumor properties.

A hot water-extracted polysaccharide fraction (PFCM) of Passiflora edulis was characterized by microanalysis, infrared spectroscopy, NMR and high performance size-exclusion chromatography. The major component in PFCM is (1→4) linked galacturonic acid (esterified and unesterified). Neutral sugars such as arabinose, glucose, rhamnose, mannose, and fucose were also present. Traces of xylose and ribose were detected. The PFCM sample had a similar molar mass to that of pectin extracted from P. edulis under acidic conditions. Sarcoma 180 tumors treated with PFCM showed a growth inhibition ratio ranging from 40.59% to 48.73% depending on the dosage and type of PFCM administration (oral or intraperitoneal). Toxicological analysis shows that PFCM increases the cell types involved in primary defense mechanisms and no significant changes in the biochemical parameters and organs (e.g., kidney and liver) were observed. However, the use of PFCM treatment increased the spleen weight when compared with the use of 5-fluorouracil.

Nanocapsule of cationic liposomes obtained using "in situ" acrylic acid polymerization: stability, surface charge and biocompatibility.

In this work, didecyldimethylammonium bromide (DDAB) and 1,2-dioleoyl-sn-glycero-3-phosphatidylethanolamine (DOPE) (2.5:1) were used to prepare liposomes coated with polyacrylic acid (PAA) using "in situ" polymerization with 2.5, 5 and 25 mM of acrylic acid (AA). The PAA concentrations were chosen to achieve partially to fully covered capsules, and the polymerization reaction was observed with real-time monitoring using dynamic light scattering (NanoDLS). The DDAB:DOPE liposomes showed stability in the tested temperature range (25-70°C), whereas the results confirmed the success of the polymerization according to superficial charge (zeta potential of +66.7±1.2 mV) results and AFM images. For the liposomes that were fully coated with PAA (zeta potential of +0.3±3.9 mV), cytotoxicity was independent of the concentration of albumin. Cationic liposomes and nanocapsules of the stable liposomes coated with PAA were obtained by controlling the surface charge, which was the most important factor related to cytotoxicity. Thus, a potential, safe drug nanocarrier was successfully developed in this work.