RESUMEN
Ga2O3 is a kind of wide-band gap semiconductor, which has great potential in deep ultraviolet detection because of its high efficiency and fast response. Doping can improve the photoelectric properties of Ga2O3 materials. In this paper, In and Al elements alloyed Ga2O3 nanowires (InAl-Ga2O3 NWs) were successfully grown on p-GaN using a cost-effective chemical vapor deposition method and a vertical structure. The GaN/InAl-Ga2O3 NWs p-n self-powered wide-gap UV photodetector (PD) was constructed based on sputtered gold film as the bottom and top electrodes, and spin coated with polymethyl methacrylate as the insulating layer in the vertical direction. The GaN/InAl-Ga2O3 UV PD exhibits excellent performances, including an extremely low dark current of 0.015 nA, a maximum photocurrent of about 16 nA at zero-bias voltage under 265 nm illumination, and a light-to-dark current ratio greater than 103. The responsivity is 0.94 mA W-1, the specific detectivity is 9.63 × 109 jones, and the good fast response/attenuation time is 31.2/69.6 ms. The self-powered characteristics are derived from the internal electric field formed between p-type GaN and n-type InAl-Ga2O3 NWs, which is conducive to the rapid separation and transfer of photogenerated carriers. This work provides an innovative mechanism of high-performance metal oxide nanowires for the application of p-n junction photodetectors, which can operate without any external bias.
RESUMEN
Antimony selenide (Sb2Se3) is a promising semiconductor for photodetector applications due to its unique photovoltaic properties. Achieving optimal carrier transport in (001)-Sb2Se3 by the material of contacting substrate requires in-depth study. In this paper, the induced growth of Sb2Se3 films from (hk0) to (hk1) planes is achieved on digenite (Cu9S5) films by post-annealing treatment. The flake-like and flower-like morphologies on the surface of Sb2Se3 films are caused by different thicknesses of the Cu9S5 films, which are related to the (hk0) and (hk1) planes of Sb2Se3 surface. The epitaxial growth of Sb2Se3 films on (105)-Cu9S5 surfaces exhibits thickness dependence. The results inform research into the controlled induced growth of low-dimensional materials. The device of Sb2Se3/Cu9S5/Si has good broadband response (visible to near-infrared), self-powered characteristics, and stability. As the crystalline quality of the Sb2Se3 film increases along the (hk1) plane, the carrier transport is enhanced correspondingly. Under the 980 nm light irradiation, the device has an excellent switching ratio of 2 × 104 at 0 bias, with responsivity, detectivity, and response time up to 17 µA W-1, 1.48 × 107 Jones, and 355/490 µs, respectively. This suggests that Sb2Se3 is suitable for self-powered photodetectors and related optical and optoelectronic devices.