Synthesis and preclinical evaluation of novel 18F-vancomycin-based tracers for the detection of bacterial infections using positron emission tomography.

INTRODUCTION: Bacterial infections are a major problem in medicine, and the rapid and accurate detection of such infections is essential for optimal patient outcome. Bacterial infections can be diagnosed by nuclear imaging, but most currently available modalities are unable to discriminate infection from sterile inflammation. Bacteria-targeted positron emission tomography (PET) tracers have the potential to overcome this hurdle. In the present study, we compared three 18F-labelled PET tracers based on the clinically applied antibiotic vancomycin for targeted imaging of Gram-positive bacteria. METHODS: [18F]FB-NHS and [18F]BODIPY-FL-NHS were conjugated to vancomycin. The resulting conjugates, together with our previously developed [18F]PQ-VE1-vancomycin, were tested for stability, lipophilicity, selective binding to Gram-positive bacteria, antimicrobial activity and biodistribution. For the first time, the pharmacokinetic properties of all three tracers were compared in healthy animals to identify potential binding sites. RESULTS: [18F]FB-vancomycin, [18F]BODIPY-FL-vancomycin, and [18F]PQ-VE1-vancomycin were successfully synthesized with radiochemical yields of 11.7%, 2.6%, and 0.8%, respectively. [18F]FB-vancomycin exhibited poor in vitro and in vivo stability and, accordingly, no bacterial binding. In contrast, [18F]BODIPY-FL-vancomycin and [18F]PQ-VE1-vancomycin showed strong and specific binding to Gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA), which was outcompeted by unlabeled vancomycin only at concentrations exceeding clinically relevant vancomycin blood levels. Biodistribution showed renal clearance of [18F]PQ-VE1-vancomycin and [18F]BODIPY-FL-vancomycin with low non-specific accumulation in muscles, fat and bones. CONCLUSION: Here we present the synthesis and first evaluation of the vancomycin-based PET tracers [18F]BODIPY-FL-vancomycin and [18F]PQ-VE1-vancomycin for image-guided detection of Gram-positive bacteria. Our study paves the way towards real-time bacteria-targeted diagnosis of soft tissue and implant-associated infections that are oftentimes caused by Gram-positive bacteria, even after prophylactic treatment with vancomycin.

Controlling forward and backward rotary molecular motion on demand.

Synthetic molecular machines hold tremendous potential to revolutionize chemical and materials sciences. Their autonomous motion controlled by external stimuli allows to develop smart materials whose properties can be adapted on command. For the realisation of more complex molecular machines, it is crucial to design building blocks whose properties can be controlled by multiple orthogonal stimuli. A major challenge is to reversibly switch from forward to backward and again forward light-driven rotary motion using external stimuli. Here we report a push-pull substituted photo-responsive overcrowded alkene whose function can be toggled between that of a unidirectional 2nd generation rotary motor and a molecular switch depending on its protonation and the polarity of its environment. With its simplicity in design, easy preparation, outstanding stability and orthogonal control of distinct forward and backward motions, we believe that the present concept paves the way for creating more advanced molecular machines.

A light-responsive liposomal agent for MRI contrast enhancement and monitoring of cargo delivery.

Medical magnetic resonance imaging (MRI) produces high-resolution anatomical images of the human body, but has limited capacity to provide useful molecular information. The light-responsive, liposomal MRI contrast agent described herein could be used to provide an intrinsic theranostic aspect to MRI and enable tracking the distribution and cargo release of drug delivery systems upon light-triggered activation.

Dynamic control over catalytic function using responsive bisthiourea catalysts.

Two novel bisthiourea molecular motor-based catalysts were designed and their dynamic control of activity and stereoselectivity in the Henry reaction using heat and light as external stimuli was investigated. Enantioselective organocatalysis studies established that a basic functional group is not required within the catalyst core to effect efficient dual stereocontrol, illustrating novel stimuli responsive organocatalysts.

Chirality controlled responsive self-assembled nanotubes in water.

The concept of using chirality to dictate dimensions and to store chiral information in self-assembled nanotubes in a fully controlled manner is presented. We report a photoresponsive amphiphile that co-assembles with its chiral counterpart to form nanotubes and demonstrate how chirality can be used to effect the formation of either micrometer long, achiral nanotubes or shorter (∼300 nm) chiral nanotubes that are bundled. The nature of these assemblies is studied using a variety of spectroscopic and microscopic techniques and it is shown that the tubes can be disassembled with light, thereby allowing the chiral information to be erased.

One-pot sequential 1,2-addition, Pd-catalysed cross-coupling of organolithium reagents with Weinreb amides.

An efficient sequential 1,2-addition/cross-coupling of Weinreb amides with two organolithium reagents is reported. This synthetic approach allows access to a wide variety of functionalized ketones in a modular way. The one-pot procedure presented here takes advantage of a kinetically stable tetrahedral Weinreb intermediate during subsequent Pd-catalyzed cross-coupling with the second organolithium reagent leading, within short reaction times and under mild conditions, to the formation of ketones in excellent overall yields.

Controlling the activity of quorum sensing autoinducers with light.

Bacteria use a communication system, called quorum sensing (QS), to organize into communities and synchronize gene expression to promote virulence and secure survival. Here we report on a proof-of-principle for externally interfering with this bacterial communication system, using light. By employing photoswitchable small molecules, we were able to photocontrol the QS-related bioluminescence in an Escherichia coli reporter strain, and the expression of target QS genes and pyocyanin production in Pseudomonas aeruginosa.

Selective functionalization of patterned glass surfaces.

Tailored writing and specific positioning of molecules on nanostructures is a key step for creating functional materials and nano-optical devices, or interfaces for synthetic machines in various applications. We present a novel approach for the selective functionalization of patterned glass surfaces with functional probes of any nature. The presented strategy is optimized for imaging fluorophore labeled nanostructures for (single-molecule) fluorescence microscopy. The first step in the protocol is coating a glass surface, here a microscope cover slide, with a 60 nm thick diamond-like carbon film. Subsequently, the pattern is defined by either writing silicon oxide on the coating with a focused electron beam, or by etching the coating with a focused ion beam to expose the glass surface. Finally, the pattern is silanized and functionalized. We demonstrate the selective binding of organic fluorophores and imaging with high contrast, especially in total-internal-reflection mode. The presented approach is flexible and combines bottom-up assembly with high-resolution lithography on glass cover slides to precisely position and image functional molecules of any type.

Nanometer-scale lithography on microscopically clean graphene.

Focused-electron-beam-induced deposition, or FEBID, enables the fabrication of patterns with sub-10 nm resolution. The initial stages of metal deposition by FEBID are still not fundamentally well understood. For these investigations, graphene, a one-atom-thick sheet of carbon atoms in a hexagonal lattice, is ideal as the substrate for FEBID writing. In this paper, we have used exfoliated few-layer graphene as a support to study the early growth phase of focused-electron-beam-induced deposition and to write patterns with dimensions between 0.6 and 5 nm. The results obtained here are compared to the deposition behavior on amorphous materials. Prior to the deposition experiment, the few-layer graphene was cleaned. Typically, it is observed in electron microscope images that areas of microscopically clean graphene are surrounded by areas with amorphous material. We present a method to remove the amorphous material in order to obtain large areas of microscopically clean graphene flakes. After cleaning, W(CO)(6) was used as the precursor to study the early growth phase of FEBID deposits. It was observed that preferential adsorption of the precursor molecules on step edges and adsorbates plays a key role in the deposition on cleaned few-layer graphene.

Combining organic photochromism with inorganic paramagnetism--optical tuning of the iron(II) electronic structure.

The crystalline photochromism of a diarylethene pyridyl ligand is applied to the modulation of the electronic environment of a high-spin Fe(II) metal ion.

Ring closure dynamics of BTE-based photochromic switches: perfluoro- versus perhydrocyclopentene derivatives.

The switching behavior of 1,2-bis(5-phenyl-2-methylthien-3-yl)perfluorocyclopentene and its nonfluorinated (perhydro) analogue are compared. For both molecules, the dynamics after optical excitation can be separated into three regimes: preswiching due to excited state mixing; the ring closure itself; postswitching related to vibrational cooling. The fluorinated version switches faster than its nonfluorinated analogue by about a factor of 4.7. This is explained by electronic level shifts near the crossing region between the S(1) and S(0) potential energy surfaces. In the nonfluorinated molecule the various levels involved in the switching have well-separated transition frequencies, which allow for a clear interpretation of experimental data. Thus, the fluorinated molecule makes a better (more efficient and faster) switch, but the nonfluorinated molecule provides a better model system for fundamental studies.

One-way optoelectronic switching of photochromic molecules on gold.

We investigate photochromic molecular switches that are self-assembled on gold. We use two experimental techniques; namely, the mechanically controllable break-junction technique to measure electronic transport, and UV/Vis spectroscopy to measure absorption. We observe switching of the molecules from the conducting to the insulating state when illuminated with visible light (lambda=546 nm), in spite of the gold surface plasmon absorption present around this wavelength. However, we fail to observe the reverse process which should occur upon illumination with UV light (lambda=313 nm). We attribute this to quenching of the excited state of the molecule in the open form by the presence of gold.

Submolecular visualisation of palladium acetate complexation with a bipyridine derivative at a graphite surface.

In situ complexation of palladium acetate by a monolayer of a bipyridine derivative at a graphite/liquid interface has been observed using scanning tunneling microscopy.

In control of motion: from molecular switches to molecular motors.

The design of molecular systems in which controlled linear and rotary motion can be achieved under the influence of an external signal is a major endeavor toward future nanoscale machinery. In this Account we describe the development of molecular switches and the discoveries that culminated in the first light-driven molecular motor. Various chiral optical molecular switches and their use as trigger elements to control organization and functions will be discussed. The construction of the first and second generation molecular motors is presented.

Enantioselective copper-catalyzed allylic alkylation with dialkylzincs using phosphoramidite ligands.

[reaction: see text]. In the presence of a catalytic amount of copper salts, cinnamyl halides undergo a regio- and enantioselective S(N)2' alkylation with dialkylzincs using chiral phosphoramidites as ligands. An S(N)2':S(N)2 ratio of 85:15 and enantiomeric excesses up to 77% for the chiral S(N)2' products are found. Variation of solvent and reaction temperature revealed that the highest regio- and enantioselectivities are found using coordinating solvents of -40 degrees C.

Chiral overcrowded alkenes; asymmetric synthesis of (3S,3'S)-(M, M)-(E)-(+)-1,1',2,2',3,3',4,4'-octahydro-3,3',7,7'-tetramethyl-4, 4'-biphenanthrylidenes.

An asymmetric synthesis route towards (3S,3'S)-(M,M)-(E)-(+)-1,1',2, 2',3,3',4,4'-octahydro-3,3',7,7'-tetramethyl-4,4'-biphenanthrylidene was developed using the Evans procedure as a key step. The absolute configurations of the title compound and of its parent ketone were determined by CD spectroscopy and could be correlated with the stereochemical results of the asymmetric alkylation. Furthermore, a comparison was made with the known (3R,3'R)-(P,P)-(E)-(-)-1,1',2,2', 3,3',4,4'-octahydro-3,3',7,7'-dimethyl-4,4'-biphenanthrylidene. Finally, the X-ray crystallographic analysis of (3S,3'S)-(M, M)-(E)-(+)-1,1',2,2',3,3',4,4'-octahydro-3,3',7,7'-tetramethyl-4, 4'-biphenanthrylidene is presented.