The wingspan suspension approach: A modified semilunar technique for multiple areas of recession.

BACKGROUND: Gingival recession can be considered an undesirable condition that results in the exposure of the root surface. There are many techniques that can be employed to address gingival recession; however, they frequently involve a second surgical site. Other approaches have been introduced in the past to address this concern, and this case study discusses the use of a modified technique to achieve root coverage. METHODS: A patient presented to the periodontics clinic with concerns regarding gingival recession. A modification to the semilunar technique was employed to address the recession, whereas double sling sutures were utilized to maintain the coronal repositioning of the flap. RESULTS: Maxillary central incisors initially presented with 2-3 mm of facial recession and root coverage was achieved by use of a modified surgical semilunar approach. No rebound noted over a 6-month period, newly established gingival margin deemed clinically stable. CONCLUSIONS: This case study provides an alternative to addressing gingival recession in the maxillary anterior region, when <3 mm of recession is noted. Avoidance of a second surgical procedure and/or donor site is of particular benefit, as well as maintenance of the blood supply. KEY POINTS: Why is this case new information? There is insufficient evidence on the use of a modified wingspan incision design Phenotype modification with elimination of a second surgical site is most ideal for the patient. What are the keys to successful management of this case? Comprehensive diagnosis and proper case selection Meticulous flap management and adequate release to allow for repositioning without tension Appropriate use ofsuture and suturing technique. What are the primary limitations to success in this case? Thin periodontal phenotype Poor oral hygiene and plaque accumulation postoperatively Loss to follow-up.

Semi-customized three-dimensional ultra-fine titanium meshes in guided bone regeneration for implant therapy in severe alveolar bone defect: a case report.

This case report provides a detailed description of a simple and fast bone regeneration procedure using a semi-customized three-dimensional ultra-fine titanium mesh. A 50-year-old male with a severe vertical and horizontal bone defect in the anterior mandible underwent implant treatment in a staged approach. The autologous bone was combined with a xenograft, and the mixture was grafted to augment the bone defect and covered with semi-customized ultra-fine titanium meshes, which were selected among its various types according to size and configuration of the bone defect, directly connected and immobilized on the tenting screws with minimal shaping. In a postoperative 6 months re-entry surgery, the performed titanium meshes were removed, implants were placed, and a bone core biopsy was obtained that demonstrated satisfactory new bone formation. Finally, two months later, the definitive prosthesis was installed. This semi-customized ultra-fine titanium mesh could help an implant clinician obtain more predictable results in the guided bone regeneration (GBR).

A novel investigational preclinical model to assess fluence rate for dental oral craniofacial tissues.

OBJECTIVE: Photodynamic Therapy (PDT) and Photobiomodulation (PBM) are recognized for their potential in treating head and neck conditions. The heterogeneity of human tissue optical properties presents a challenge for effective dosimetry. The porcine mandible cadaver serves as an excellent model and has several similarities to human tissues of the dental oral craniofacial complex. This study aims to validate a novel modeling system that will help refine PDT and PBM dosimetry for the head and neck region. METHODS AND MATERIALS: Light transmission was analyzed through several tissue combinations at distances of 2 mm to 10 mm. Maximum light fluence rates (mW/cm2) were compared across tissue types to reveal the effects of tissue heterogeneity. RESULTS: The study revealed that light fluence is affected by tissue composition, with dentin/enamel showing reduced transmission and soft tissue regions exhibiting elevated values. The porcine model has proven to be efficient in mimicking human tissue responses to light, enabling the potential to optimize future protocols. CONCLUSION: The porcine mandible cadaver is a novel model to understand the complex interactions between light and tissue. This study provides a foundation for future investigations into dosimetry optimization for PDT and PBM.

Three-dimensional printing of the human lung pleural cavity model for PDT malignant mesothelioma.

OBJECTIVE: The primary aim was to investigate emerging 3D printing and optical acquisition technologies to refine and enhance photodynamic therapy (PDT) dosimetry in the management of malignant pleural mesothelioma (MPM). MATERIALS AND METHODS: A rigorous digital reconstruction of the pleural lung cavity was conducted utilizing 3D printing and optical scanning methodologies. These reconstructions were systematically assessed against CT-derived data to ascertain their accuracy in representing critical anatomic features and post-resection topographical variations. RESULTS: The resulting reconstructions excelled in their anatomical precision, proving instrumental translation for precise dosimetry calculations for PDT. Validation against CT data confirmed the utility of these models not only for enhancing therapeutic planning but also as critical tools for educational and calibration purposes. CONCLUSION: The research outlined a successful protocol for the precise calculation of light distribution within the complex environment of the pleural cavity, marking a substantive advance in the application of PDT for MPM. This work holds significant promise for individualizing patient care, minimizing collateral radiation exposure, and improving the overall efficiency of MPM treatments.

Facially Driven Digital Workflow for Maxillary and Mandibular Milled Implant- Retained Overdentures Using Two Different Unsplinted Attachment Systems: Case Report.

Unsplinted attachment systems for implant overdentures offer various benefits for edentulous patients, including cost-effectiveness, enhanced cleansability, and less need for manual dexterity. This article describes a facially driven digital workflow for fabricating a maxillary implant overdenture retained by conometric-style attachments (Atlantis® Conus) with a palateless design opposing an implant overdenture retained by standard attachments (LOCATOR®). This procedure provides a predictable and accurate technique to digitally scan the master casts with wax rims for articulation and to guide the digital teeth design set-up for a predictable esthetic outcome. The removable prosthesis workflow involves virtual teeth set-up, a 3D-printed trial denture, a milled definitive prosthesis, and intraoral pick-up for both unsplinted attachment systems. The clinical and laboratory steps are described.

A Periodontal Perspective on the Successful Treatment of Recurrent Benign Gingival Lesions Affecting the Anterior Dentition: Two Case Reports.

Recurrent benign gingival lesions occurring in the anterior dentition are clinical dilemmas. While complete removal of such lesions is required to prevent recurrence, this can result in a poor esthetic outcome. Relative to this conundrum, this report discusses the diagnosis, psychologic management, and clinical treatment of two patients with recurring lesions on the facial gingiva of the mandibular and maxillary incisors, respectively. Patient A, a 55-year-old woman, presented with a recurrent peripheral ossifying fibroma (POF); Patient B, a 76-year-old man, presented with a recurrent pyogenic granuloma (PG). Both patients underwent multiple procedures and were ultimately treated without lesion recurrence. The efficacious surgical treatment of recurrent gingival lesions like POF and PG requires an aggressive approach involving lesion removal of the lesion as well as a 1.0- to 2.0-mm margin of normal tissue, underlying alveolar bone, and associated periodontal ligament (PDL). The rationale for this approach stresses the potential periodontal and esthetic ramifications that were considered. In summary, when recurrent benign gingival lesions are localized to the anterior part of the mouth, the approach to their surgical removal should be modified to minimize the extent of gingival recession and other potential esthetic issues.

Reliability of Cone Beam Computed Tomography in Predicting Implant Treatment Outcomes in Edentulous Patients.

Since the development of CBCT has been utilized in dentistry, the images of the CBCT can assist the surgeon to evaluate the anatomy carefully. Despite the value of radiology evaluation, implant procedures may require additional consideration rather than only evaluating the anatomical factors. The purpose of this study is to evaluate the predictability of using CBCT alone to plan for implant placement in edentulous patients digitally. CBCT images were analyzed by clinicians, measuring the maxillary and mandibular ridge heights and widths digitally of four predetermined implant sites in the maxillary and two selected implant sites in the mandibular arches of 91 patients planning for implant-supported overdenture. A total of 47 patients out of the 91 had completed implant placement on the edentulous ridge, contributing to 55 upper and/or lower arches (136 dental implants). Both predictabilities are low, implying that CBCT planning for implant placement on the edentulous ridge is not a good index and is insufficient to predict the surgical procedures as a solo method. The findings of this study indicate that digital planning by CBCT is insufficient to serve as an individual tool to predict implant procedures. Further information and evaluation must be considered for implant placement in the edentulous ridge.

Ceramic Dental Implants: A Systematic Review and Meta-analysis.

Purpose: To evaluate the performance of one- and two-piece ceramic implants regarding implant survival and success and patient satisfaction. Materials and Methods: This review followed the PRISMA 2020 guidelines using PICO format and analyzed clinical studies of partially or completely edentulous patients. The electronic search was conducted in PubMed/MEDLINE using Medical Subject Headings (MeSH) keywords related to dental zirconia ceramic implants, and 1,029 records were received for detailed screening. The data obtained from the literature were analyzed by single-arm, weighted meta-analyses using a random-effects model. Forest plots were used to synthesize pooled means and 95% CI for the change in marginal bone level (MBL) for short-term (1 year), mid-term (2 to 5 years), and long-term (over 5 years) follow-up time intervals. Results: Among the 155 included studies, the case reports, review articles, and preclinical studies were analyzed for background information. A meta-analysis was performed for 11 studies for one-piece implants. The results indicated that the MBL change after 1 year was 0.94 ± 0.11 mm, with a lower bound of 0.72 and an upper bound of 1.16. For the mid term, the MBL was 1.2 ± 0.14 mm with a lower bound of 0.92 and an upper bound of 1.48. For the long term, the MBL change was 1.24 ± 0.16 mm with a lower bound of 0.92 and an upper bound of 1.56. Conclusion: Based on this literature review, one-piece ceramic implants achieve osseointegration similar to titanium implants, with a stable MBL or a slight bone gain after an individual initial design depending on crestal remodeling. The risk of implant fracture is low for current commercially available implants. Immediate loading or temporization of the implants does not interfere with the course of osseointegration. Scientific evidence for two-piece implants is rare.

Validating Homogeneity for a Novel 3-Dimensional Tissue Phantom Modeling System of the Human Maxilla.

Silicon phantom models have been utilized to calculate light fluence in patients being treated with Photodynamic Therapy (PDT). This application can be utilized for other non-ionizing wavelength therapies such as Photobiomodulation (PBM). We have developed a novel protocol to validate homogeneity for 3-dimensional silicon phantom models of the human maxilla. Accurately quantifying the light profiles of human tissue can accommodate for varying optical properties that occur between subjects. More importantly, this can help optimize light fluence dosimetry calculations to achieve intended results. Silicon models of identical composition were fabricated into two different shapes: 1 flat-planar cylindrical shaped model, 2) non-flat planar (3-dimensional) mold of the human maxilla. Fabricating homogenous silicon phantom models continues to be a challenge as micro-bubbles can contaminate the compound during the curing process. Integrating both proprietary CBCT and handheld surface acquisition imaging devices confirmed our results to be within 0.5mm of accuracy. This protocol was specifically used to cross-reference and validate homogeneity at various depths of penetration. These results present the first known successful validation of identical silicon tissue phantoms with a flat-planar surface vs. a non-flat 3D planar surface. This proof-of-concept phantom validation protocol is sensitive to the specific variations of 3-dimensional surfaces and can be applied to a workflow used to capture accurate light fluence calculations in the clinical setting.

PDT Light Fluence Phantom Modeling of the Human Pleural Cavity: A Proof-of-Concept Pre-Clinical Study.

We have developed a novel scanning protocol for a life-sized human phantom model using handheld three-dimensional (3D) surface acquisition devices. This technology will be utilized to develop light fluence modeling of the internal pleural cavity space during Photodynamic Therapy (PDT) of malignant mesothelioma. The external aspect of the chest cavity phantom was prefabricated of a hardened synthetic polymer resembling ordinary human anatomy (pleural cavity space) and the internal aspect remained hollow without any characterizations. Both surfaces were layered with non-reflective adhesive paper to create non-uniformed surface topographies. These surface characteristics were established in randomized X-Y-Z coordinates ranging in dimensions from 1-15mm. This protocol utilized the handheld Occipital Scanner and the MEDIT i700. The Occipital device required a minimum scanner-to-surface distance of 24cm and the MEDIT device 1cm respectively. The external and internal aspects of the phantom model were successfully scanned acquiring digital measurements in actual value and converted into a digital image file. The initial surface rendering was acquired by the Occipital device and applied with proprietary software to guide the MEDIT device to fill voided areas. This protocol is accompanied by a visualization tool that allows for real-time inspection of surface acquisition in 2D and 3D. This scanning protocol can be utilized to scan the pleural cavity for real-time guidance for light fluence modeling during PDT, which will be expanded to ongoing clinical trials.

Photobiomodulation in dental extraction therapy: Postsurgical pain reduction and wound healing.

BACKGROUND: This scoping review and analysis were designed to assess the amount of time spent delivering photobiomodulation (PBM) light therapy after dental extraction to improve postoperative pain and wound healing. TYPES OF STUDIES REVIEWED: The scoping review was performed according to the Cochrane Collaboration and Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria. Publications were specific for human randomized controlled clinical trials, PBM after dental extraction therapy, and related clinical outcomes. Online databases searched included PubMed, Embase, Scopus, and Web of Science. Analyses were conducted to analyze the prescribed intervals of time (seconds) per application of PBM. RESULTS: Of the 632 studies initially identified, 22 studies fulfilled the inclusion criteria. Postoperative pain and PBM were reported in 20 articles for 24 treatment groups, with treatment times ranging from 17 through 900 seconds and wavelengths from 550 through 1,064 nm. Clinical wound healing outcomes were reported in 6 articles for 7 groups with treatment times ranging from 30 through 120 seconds and wavelengths from 660 through 808 nm. PBM therapy was not associated with adverse events. CONCLUSIONS AND PRACTICAL IMPLICATIONS: There is future potential to integrate PBM after dental extraction therapy to improve postoperative pain and clinical wound healing. The amount of time spent delivering PBM will vary by wavelength and the type of device. Further investigation is needed to translate PBM therapy into human clinical care.

Improving Titanium Implant Stability with Photobiomodulation: A Review and Meta-Analysis of Irradiation Parameters.

Objective: This analysis was designed to present a summary of available evidence that will inform practice and guide future research for photobiomodulation (PBM) after titanium implant placement procedures. Materials and methods: A systematic review was performed according to the Cochrane Collaboration and in line with Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) criteria. Two investigators screened the titles and abstracts, and reviewed articles for risk of bias. Online databases searched included PubMed, Embase, Scopus, and Web of Science. Terms were specific to the effects of PBM on dental implant stability. Results: Eight hundred fifty-six studies were identified, and 15 studies fulfilled the inclusion criteria. Light sources included both laser and light emitting diode (LED) devices. Wavelengths ranged from 618 to 1064 nm. The meta-analysis concluded that all 15 published studies were able to safely apply PBM near dental implants without adverse events. Laser and LED wavelengths that reported significant results included 618, 626, 830, 940 (2 × ), and 1064 nm. Conclusions: The use of adjunctive PBM can be safely prescribed after surgical placement of titanium implants. Six groups reported statistical significance for improving implant stability (four laser diode, two LED) in wavelengths ranging from 618 to 1064 nm. The amount of time spent delivering PBM was not a variable that differentiated whether a study reported significant results.

Periodontal and Implant Radiology.

Dental radiography can be used to detect alveolar bone levels around periodontal and peri-implant structures. Periodontal radiographic images can assess alveolar bone height, periodontal ligament, furcation involvement, and evidence of bone destruction. Peri-implant radiographic images can assess the alveolar bone height in relation to the implant structure. As an adjunct to patient care, radiography can aid in the diagnosis of non-health.

Healed Edentulous Sites: Suitability for Dental Implant Placement, Need for Secondary Procedures, and Contemporary Implant Designs.

PURPOSE: The purpose of this retrospective computed tomography study was to evaluate bone availability for dental implant placement, frequency of bone augmentation procedures, frequency of anatomical structures that compromise implant placement, and frequency of implant dimensions, and to determine which edentulous sites would benefit from the use of a sloped implant versus a traditional flat design. MATERIALS AND METHODS: Recorded parameters included the width of the ridge, the buccal and lingual/palatal alveolar bone height in reference to different anatomical landmarks, determination of implant placement, selection of an implant with a flat or sloped top, and need for a secondary bone augmentation procedure. RESULTS: One thousand three hundred seventy edentulous sites were evaluated in 216 patients. Implants could be placed in 60.6% of the total sites, where the coronal portion would be sloped in 59% of sites and conventionally flat in 41%; 39.4% of sites were not adequate for implant placement, where 56.5% needed additional guided bone regeneration procedures and 43.5% required sinus augmentation procedures. The inferior alveolar canal was the most frequent anatomical structure limiting size and/or placement. CONCLUSION: The study indicates that implants can be placed in slightly over half of edentulous sites without a secondary grafting procedure. The possibility of dental implant placement varied according to the volume and morphology of alveolar bone and related anatomical structures. This decreased from anterior to posterior in both arches. The sloped implant design was beneficial. In addition, the sloped implant design resulted in the placement of a longer implant.

The Long-Term Evaluation of Two-Unit Fixed Partial Dentures on Short, Threaded Implants: Delayed Versus Immediate Loading.

Placement of short implants is a common approach to rehabilitate edentulous areas. The objective of this study was to evaluate the long-term survival of 7.0- and 8.5-mm implants placed in either a delayed or immediate loading protocol. Life table analysis revealed the implants treated with the delayed loading protocol had a 90.9% survival rate and the implants treated with the immediate loading protocol had a survival rate of 92.0%. The results of this 8-year prospective study demonstrate similar survival rates of short, cylindrical threaded implants placed by either a delayed or immediate loading protocol.

Diabetic Serum Inhibits Osteoblast Adhesion to Titanium Surface Through Advanced Glycation End Products: An In Vitro Study.

PURPOSE: Diabetes mellitus has been shown to delay osseointegration of titanium dental implants. This study tested the hypothesis that serum derived from diabetes negatively affects osteoblast adhesion to polystyrene and titanium surfaces, partly through the presence of advanced glycation end products (AGEs). MATERIALS AND METHODS: Twenty-four Sprague-Dawley rats were divided into three groups: normoglycemic control, streptozotocin-induced diabetic group, and diabetic group treated with the AGE inhibitor aminoguanidine. Polystyrene or titanium disks were preincubated in serum derived from each group. Human osteoblasts transfected with green fluorescent protein (GFP) were cultured, and the number of adherent osteoblasts was quantified. High-pressure liquid chromatography (HPLC) was used to fractionate eluates, which were further characterized by western blot with AGE antibody and adhesion assays. In parallel, sera derived from healthy patients, patients with controlled diabetes, and patients with uncontrolled diabetes were utilized for osteoblast adhesion assay and western blot. RESULTS: Diabetic serum significantly reduced the number of adherent osteoblast and osteoblast aggregates on titanium disks, whereas aminoguanidine-treated serum rescued the effect of diabetes on the number of adherent osteoblast aggregates. Fractionated diabetic serum revealed distinct AGE bands at ~100 kDa and 44 kDa, whereas healthy serum did not express any. In human serum samples, both controlled and uncontrolled diabetes led to a significant reduction in the number of adherent osteoblasts on polystyrene and titanium surfaces compared with normoglycemic serum. This correlated with presence of AGEs in western blot in diabetic but not in healthy serum. CONCLUSION: Osteoblast adhesion on the titanium surface was greatly reduced by the exposure of serum derived from diabetic rats or humans. Recovery of osteoblast aggregates by aminoguanidine treatment suggests that AGEs played a role in this negative effect. The correlating presence of AGEs from the fractionated sera of diabetic rats or humans and impaired osteoblast adhesion on the titanium surface further supports this role.

Peri-implant Mucosal Tissues and Inflammation: Clinical Implications.

PURPOSE: The purpose of this review was to explore the available literature and compile studies that discuss the relevance of the biofilm, onset and progression of disease, critical peri-implant pocket depth, frequency of supportive implant therapy, excess cement, and keratinized peri-implant tissues as related to peri-implant disease. MATERIALS AND METHODS: PubMed, Cochrane Oral Health Group Specialized Trial Register, and hand searches of related journals were performed in relationship to the focused question. Reports describing techniques, preclinical studies, and case reports were excluded. RESULTS: Due to the absence of controlled studies, a meta-analysis could not be performed. Summaries of relevant publications were completed for each topic area. Clinical recommendations were developed to provide guidance to the practitioner. CONCLUSION: The importance of proper diagnosis, planning, and clinical treatment cannot be overstated. Patient factors including systemic disease, periodontal status, and oral hygiene significantly impact peri-implant health. Clinician factors such as implant position, excess cement, and restorative design can contribute to development of peri-implant disease. Surveillance of implant status is essential and can be assisted by the assessment of risk factors, establishment of a proper recall program, and monitoring changes in bone and peri-implant pocket depths.

Effects of Conventional Synthetic Disease-Modifying Antirheumatic Drugs on Response to Periodontal Treatment in Patients with Rheumatoid Arthritis.

Rheumatoid arthritis (RA) and periodontitis are common chronic inflammatory diseases and periodontitis is known to be more common and more severe in patients with RA. Based on a paucity of studies about the relationship between common conventional synthetic disease-modifying antirheumatic drugs (csDMARDs) and periodontitis, this prospective study aimed to evaluate the adjunctive effect of csDMARDs on response to nonsurgical periodontal treatment in patients with RA. Thirty-two patients with RA (RA group) and 32 systemically healthy patients (control group) with periodontitis were included in this study. The RA group patients were treated with csDMARDs, such as methotrexate, hydroxychloroquine, and sulfasalazine. Conventional nonsurgical periodontal treatment with scaling and root planing was performed in both groups. The extent and severity of periodontitis were evaluated by plaque index (PI), gingival index (GI), probing depth (PD), clinical attachment level (CAL), and bleeding on probing (BOP) at baseline and 4 weeks after periodontal treatment. There was no statistically significant difference of periodontal parameters between the RA and control groups at baseline. Four weeks after scaling and root planing, PD reduction, and CAL gain were higher in the RA group treated with csDMARDs compared to the control group, and the difference was statistically significant (P = 0.006 and 0.003, respectively). A post hoc analysis of the RA group showed no statistically significant difference on the response to nonsurgical periodontal treatment in multiple csDMARDs therapy and addition of NSAIDs and/or steroids to csDMARDs. In patients with RA, csDMARDs showed beneficial effect on periodontal clinical parameters following the nonsurgical periodontal treatment.

Surgical Alternatives for Treating Peri-implantitis.

The objective of this case series was to describe surgical approaches that can be used to efficiently and effectively treat peri-implantitis as measured by positive changes in clinical parameters. A total of 32 patients with 45 implants were treated surgically to eliminate peri-implantitis. Baseline clinical parameters measured prior to surgery were compared to those made 6 months postsurgery to evaluate the efficacy of each procedure. Implants demonstrating signs of peri-implantitis were treated by one of three approaches: (1) regenerative surgery, (2) osseous resective surgery, or (3) apically repositioned flap surgery. In all instances, the exposed implant surfaces were debrided and decontaminated. Relative to baseline values, regenerative surgery yielded statistically significant changes in probing depth (PD) (7.21 ± 0.27 mm to 4.09 ± 0.14 mm) and percentage of sites exhibiting bleeding on probing (BoP) (100.0% ± 0.0% to 10.6% ± 3.3%) as measured at the 6-month recall visit (P ≤ .05). The decrease in probing depth was not dependent on the type of graft material used (P ≤ .05). Resective surgery yielded statistically significant changes in PD (5.86 ± 0.23 mm to 3.63 ± 0.14 mm) and the percentage of sites exhibiting BoP (100.0% ± 0.0% to none) (P ≤ .05). Finally, the implants treated via apically repositioned flap surgery demonstrated statistically significant decreases (P ≤ .05) in both PD (6.79 ± 0.27 mm to 4.32 ± 0.16 mm) and BOP (100.0% ± 0.0% to 14.3% ± 6.7%) (P ≤ .05). Regenerative, resective, and apically positioned flap surgery can be utilized to successfully treat peri-implantitis.

Alveolar Ridge Augmentation with Three-Dimensional Printed Hydroxyapatite Devices: A Preclinical Study.

The objective of this study was to evaluate the effectiveness of precise three-dimensional hydroxyapatite printed micro- and macrochannel devices for alveolar ridge augmentation in a canine model. All grafts induced minimal inflammatory and fibrotic reactions. Examination of undecalcified sections revealed that both types of grafts demonstrated bone ingrowth. The majority of the bone growth into the block graft was into the channels, though a portion grew directly into the construct in the form of small bony spicules. In conclusion, bone ingrowth was readily demonstrated in the middle of the implanted printed devices.