Interaction between starch and dietary compounds: New findings and perspectives to produce functional foods.

Due to the increased prevalence of overweight, obesity, diabetes, colon cancer, cardiovascular diseases, and metabolic syndrome, dietary approaches to reduce starch digestion and regulate glucose homeostasis have gained attention. Starch is a polysaccharide in most daily food consumed as bakery products, snacks, breakfast cereals, and pasta, which are often vilified. However, it is also present in beans, lentils, and oatmeal, which are considered healthy food products. The difference relays on the food matrix and the thermal process that can produce interactions between starch and dietary compounds (protein, lipid, non-starch polysaccharide, and bioactive compounds) or among starch chains (retrogradation). Such interactions produce structural changes so the digestive enzymes cannot hydrolyze them; additionally, the physical barrier of some macromolecules (proteins, hydrocolloids) restricts starch gelatinization and accessibility of the digestive enzymes to hydrolyze the starch. The interactions mentioned above and the use of some macromolecules as physical barriers could be explored as a pathway to develop functional foods. This review analyzes the interactions between starch and dietary compounds influenced by the processing of some food matrices to better understand their potential for developing functional foods.

Impact of plasma-activated water on the supramolecular structure and functionality of small and large starch granules.

Hydrothermal (HMT) and water agitation (WA) treatments using plasma-activated water (PAW) were employed as sustainable methods to modify the molecular and functional performance of small (rice) and large (potato) starch granules. HMT-PAW and WA-PAW treatments resulted in etched and damaged granular surfaces that rearranged the long and short-range crystallinity of the modified starches. Both treatments seemed to predominantly occur in the amorphous region of the rice starch and the crystalline regions of the potato starch, changing the crystallinity values from 22.9 and 14.8 % to 31.8 and 10.4 %, respectively. Thus, the level of the arrangement of chains reached after PAW treatment decreased the ability of rice starch granules to swell (16 to 9 %) and leach out starch molecules from the granules (4.5 to 1.3 %), decreasing the viscosity and pasting profiles as indicated by n and k values. Opposite behavior was observed in the modified potato starches since starch components leached out to a higher extent (1.7 to 5.4 %). The results showed that HMT and WA treatments using PAW are feasible eco-friendly methods for modifying starch granules without chemical reagents. These modified starches could be suitable as functional ingredients or biopolymeric matrices for the food and packaging industry.

Effect of retrograded starch with different amylose content on the rheological properties of stored yogurt.

Resistant starch (RS) promotes health benefits; however, when added to foods, it could change the rheological properties. The effect of adding different concentrations (2.5, 5, 7.5, and 10%) of retrograded corn starch with 27% (RNS) or 70% (RHS) amylose content on the properties of yogurt was evaluated through measurements of flow behavior and gel structure. Syneresis and resistant starch content were also assessed. Results were analyzed using multiple regression to describe the effect of starch concentration and storage time on the properties of yogurt added with RNS or RHS. Syneresis was reduced, RNS reinforced the structure increasing the water absorption capacity and the consistency index; meanwhile, RHS provided a yogurt containing up to 10 g of RS in 100 g of sample, allowing obtaining a functional dairy product. Creep-recovery test showed that adding RNS or RHS favored the matrix conformation, and the yogurt samples were able to recover. The final product behaved like a solid material with a firmer and more stable gel structure, resulting in a strengthened gel without weakening the yogurt structure, showing a characteristic like Greek-style or stirred yogurt depending on the type and concentration of retrograded starch. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05735-x.

Rheological performance of film-forming solutions made from plasma-modified starches with different amylose/amylopectin content.

Normal and high amylose corn starches were modified using HMDSO plasma at different time treatments. Changes in functional properties of starch granule, film-forming solutions (FFS) and films were investigated. SEM analysis revealed HMDSO coating deposition on the granule surface, which limited the amylopectin leach out from the granules to the continuous matrix, affecting the rheological properties of the FFS. The amylopectin restriction resulted in a low reinforcement of the network decreasing the viscosity as indicated by n and k values. Also, a gel-like behavior (G' > G″) was observed when the amylose and time treatment increased, suggesting that the matrix becomes less elastic with softer entanglement. This behavior was confirmed by creep test and Burger model parameters. The plasma treatments allowed obtaining FFS with low viscosity, suitable for developing soft and hydrophobic films with low flexibility, as indicated by the decrease of the maximum stress, Hencky strain and permeance values.

Films made from plasma-modified corn starch: Chemical, mechanical and barrier properties.

In this study, the chemical, mechanical and barrier properties of films made from plasma-modified corn starch (MSF) were evaluated as a function of the amylose content (30, 50 and 70 %). SEM analysis revealed the presence of remnant starch granules (RSG) in all films, which promoted the ordering of helices as suggested by the FTIR results. Moreover, XPS analysis was used to identify the oxidation mechanism in all MSF as the atomic proportion of hydroxyl, carbonyl and carboxyl groups changed. Also, the increase of C-C proportions suggested crosslinking in MSF70. TGA analysis indicated low interaction between starch and the plasticizer as the tensile strength and elongation at break diminished in MSF50 and MSF70 due to the low plasticizing effect of glycerol, the oxidation phenomena and the depolymerization of starch chains. However, the crosslinking of MSF70 showed characteristics of rigid films with good hydrophobic performance.

Starch digestibility: past, present, and future.

In the last century, starch present in foods was considered to be completely digested. However, during the 1980s, studies on starch digestion started to show that besides digestible starch, which could be rapidly or slowly hydrolysed, there was a variable fraction that resisted hydrolysis by digestive enzymes. That fraction was named resistant starch (RS) and it encompasses those forms of starch that are not accessible to human digestive enzymes but can be fermented by the colonic microbiota, producing short-chain fatty acids. RS has been classified into five types, depending on the mechanism governing its resistance to enzymatic hydrolysis. Early research on RS was focused on the methods to determine its content in foods and its physiological effects, including fermentability in the large intestine. Later on, due to the interest of the food industry, methods to increase the RS content of isolated starches were developed. Nowadays, the influence of RS on the gut microbiota is a relevant research topic owing to its potential health-related benefits. This review summarizes over 30 years of investigation on starch digestibility, its relationship with human health, the methods to produce RS and its impact on the microbiome. © 2018 Society of Chemical Industry.

HMDSO plasma treatment as alternative to modify structural properties of granular starch.

In the present study, the effect of plasma treatment on the structural properties of three granular corn starches (normal, Hylon V and Hylon VII) was investigated. Thermal (TGA/DSC), structural (XRD/FTIR) and chemical (XPS) properties were evaluated. Plasma treatment resulted in partial evaporation of water molecules changing the organization level of the double helices in the crystalline lamellae. Moreover, XRD results suggested a decrease of the long-range crystallinity and suggested changes in amylose chains after treatments. The crosslinking of modified amylose chains measured by XPS analysis resulted in variations in the gelatinization parameters as well as in its heterogeneous crystalline structure. The results indicate that the type and extent of changes in the structure of plasma-treated corn starch depends on the distribution of the water molecules inside the crystalline regions (helical water) and on the amylose content. In addition, the obtained results indicated that plasma treatment is a suitable method to modify starch without any incorporation of new elements from hexamethyldisiloxane (HMDSO), which only promotes stronger interactions between the starch main components.

Extruded Unripe Plantain Flour as an Indigestible Carbohydrate-Rich Ingredient.

There is a growing interest in the development of functional ingredients, including those with high indigestible carbohydrate content. Unripe plantain flour (UPF) is a source of indigestible carbohydrates, type II resistant starch (RS) in particular. A major drawback of UPF, however, is that its RS content decreases sharply after wet heat treatment. Here, we explore the possibility of preparing an extruded UPF-based functional ingredient that retains limited starch digestibility features and high dietary fiber content. Both an unripe plantain pulp flour (UPFP) and a whole (pulp and peel) unripe plantain flour (UPFW) were prepared, extruded under identical conditions and evaluated for their gelatinization degree, total starch (TS), resistant starch (RS), and total dietary fiber (TDF) content; functional properties, such as pasting profile, water retention capacity, and solubility, and oil absorption index were also analyzed. The extruded functional ingredient was added to a yogurt and the rheological characteristics and in vitro starch digestibility of the product were evaluated. The extruded UPFW showed a lower gelatinization degree than the extruded UPFP, which may be due to the higher non-starch polysaccharide content of the former. A high TDF content was recorded in both extrudates (12.4% in UPFP and 18.5% in UPFW), including a significant RS fraction. The water retention capacity and solubility indices were higher in the extruded flours, particularly in UPFW, while only marginal differences in oil retention capacity were observed among the products. The addition of UPFP or UPFW (1.5 g TDF, w/v) to a yogurt did not alter the viscosity of the product, an important characteristic for the consumer's approval. Moreover, the composite yogurt showed a relatively low starch digestion rate. Extrusion of UPFs may be an alternative for the production of functional ingredients with important DF contents.

Multivariable Analysis of Gluten-Free Pasta Elaborated with Non-Conventional Flours Based on the Phenolic Profile, Antioxidant Capacity and Color.

The phenolic compounds, color and antioxidant capacity of gluten-free pasta prepared with non-conventional flours such as chickpea (CHF), unripe plantain (UPF), white maize (WMF) and blue maize (BMF) were analyzed. Fifteen phenolic compounds (five anthocyanins, five hydroxybenzoic acids, three hydroxycinnamic acids, one hydroxyphenylacetic acid and one flavonol) were identified in pasta prepared with blue maize, and 10 compounds were identified for samples prepared with white maize. The principal component analysis (PCA) led to results describing 98% of the total variance establishing a clear separation for each pasta. Both the proportion (25, 50 and 75%) and type of maize flour (white and blue) affected the color parameters (L*, C ab *, h ab and ΔE* ab ) and antioxidant properties (DPPH, ABTS and FRAP methods) of samples, thus producing gluten-free products with potential health benefits intended for general consumers (including the population with celiac disease).

Starch Structure Influences Its Digestibility: A Review.

Twenty-five years ago, it was found that a significant fraction of the starch present in foods is not digested in the small intestine and continues to the large intestine, where it is fermented by the microbiota; this fraction was named resistant starch (RS). It was also reported that there is a fraction of starch that is slowly digested, sustaining a release of glucose in the small intestine. Later, health benefits were found to be associated with the consumption of this fraction, called slowly digestible starch (SDS). The authors declare both fractions to be "nutraceutical starch." An overview of the structure of both fractions (RS and SDS), as well as their nutraceutical characteristics, is presented with the objective of suggesting methods and processes that will increase both fractions in starchy foods and prevent diseases that are associated with the consumption of glycemic carbohydrates.

Gluten-free snacks using plantain-chickpea and maize blend: chemical composition, starch digestibility, and predicted glycemic index.

An increase in celiac consumers has caused an increasing interest to develop good quality gluten-free food products with high nutritional value. Snack foods are consumed worldwide and have become a normal part of the eating habits of the celiac population making them a target to improve their nutritive value. Extrusion and deep-frying of unripe plantain, chickpea, and maize flours blends produced gluten-free snacks with high dietary fiber contents (13.7-18.2 g/100 g) and low predicted glycemic index (28 to 35). The gluten-free snacks presented lower fat content (12.7 to 13.6 g/100 g) than those reported in similar commercial snacks. The snack with the highest unripe plantain flour showed higher slowly digestible starch (11.6 and 13.4 g/100 g) than its counterpart with the highest chickpea flour level (6 g/100 g). The overall acceptability of the gluten-free snacks was similar to that chili-flavored commercial snack. It was possible to develop gluten-free snacks with high dietary fiber content and low predicted glycemic index with the blend of the 3 flours, and these gluten-free snacks may also be useful as an alternative to reduce excess weight and obesity problems in the general population and celiac community.