Probing the Role of Integrins in Keratinocyte Migration Using Bioengineered Extracellular Matrix Mimics.

Bioengineered extracellular matrix (ECM) mimetic materials have tunable properties and can be engineered to elicit desirable cellular responses for wound repair and tissue regeneration. By incorporating relevant cell-instructive domains, bioengineered ECM mimics can be designed to provide well-defined ECM-specific cues to influence cell motility and differentiation. More importantly, bioengineered ECM surfaces are ideal platforms for studying cell-material interactions without the need to genetically alter the cells. Here, we showed that bioengineered ECM mimics can be employed to clarify the role of integrins in keratinocyte migration. Particularly, the roles of α5ß1 and α3ß1 in keratinocytes were examined, given their known importance in keratinocyte motility. Two recombinant proteins were constructed; each protein contains a functional domain taken from fibronectin (FN-mimic) and laminin-332 (LN-mimic), designed to bind α5ß1 and α3ß1, respectively. We examined how patient-derived primary human keratinocytes migrate when sparsely seeded as well as when allowed to move collectively. We found, consistently, that FN-mimic promoted cell migration while the LN-mimic did not support cell motility. We showed that, when keratinocytes utilize α5ß1 integrins on FN-mimics, they were able to form stable focal adhesion plaques and stabilized lamellipodia. On the other hand, keratinocytes on LN-mimic utilized primarily α3ß1 integrins for migration and, strikingly, cells were unable to activate Rac1 and form stable focal adhesion plaques. Taken together, employment of our bioengineered mimics has allowed us to clarify the roles of α5ß1 and α3ß1 integrins in keratinocyte migration, as well as further provided a mechanistic explanation for their differences.

Genetic improvement of Magnetospirillum gryphiswaldense for enhanced biological removal of phosphate.

OBJECTIVES: To improve its phosphate accumulating abilities for phosphate recycling from wastewater, a magnetotactic bacterium, Magnetospirillum gryphiswaldense, was genetically modified to over-express polyphosphate kinase. RESULTS: Polyphosphate kinase was over-expressed in the bacterium. The recombinant strain accumulated ninefold more polyphosphate from synthetic wastewater compared to original wild type. The magnetic property of the recombinant M. gryphiswaldense strain was retained. CONCLUSIONS: The recombinant M. gryphiswaldense can be used for phosphate removal and recovery in bioremediation.

Using elastin protein to develop highly efficient air cathodes for lithium-O2 batteries.

Transition metal-nitrogen/carbon (M-N/C, M = Fe, Co) catalysts are synthesized using environmentally friendly histidine-tag-rich elastin protein beads, metal sulfate and water soluble carbon nanotubes followed by post-annealing and acid leaching processes. The obtained catalysts are used as cathode materials in lithium-O2 batteries. It has been discovered that during discharge, Li2O2 nanoparticles first nucleate and grow around the bead-decorated CNT regions (M-N/C centres) and coat on the catalysts at a high degree of discharge. The Fe-N/C catalyst-based cathodes deliver a capacity of 12,441 mAh g(-1) at a current density of 100 mA g(-1). When they were cycled at a limited capacity of 800 mAh g(-1) at current densities of 200 or 400 mA g(-1), these cathodes showed stable charge voltages of ∼3.65 or 3.90 V, corresponding to energy efficiencies of ∼71.2 or 65.1%, respectively. These results are considerably superior to those of the cathodes based on bare annealed CNTs, which prove that the Fe-N/C catalysts developed here are promising for use in non-aqueous lithium-O2 battery cathodes.

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from Escherichia coli for Skin Tissue Engineering.

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins that have incorporated functional domains derived from nature (or created de novo) have been reported. In particular, artificial extracellular matrix (aECM) proteins have been developed; these aECM proteins consist of biological domains taken from fibronectin, laminins and collagens and are combined with structural domains including elastin-like repeats, silk and collagen repeats. To date, aECM proteins have been widely investigated for applications in tissue engineering and wound repair. Recently, Tjin and coworkers developed integrin-specific aECM proteins designed for promoting human skin keratinocyte attachment and propagation. In their work, the aECM proteins incorporate cell binding domains taken from fibronectin, laminin-5 and collagen IV, as well as flanking elastin-like repeats. They demonstrated that the aECM proteins developed in their work were promising candidates for use as substrates in artificial skin. Here, we outline the design and construction of such aECM proteins as well as their purification process using the thermo-responsive characteristics of elastin.

Biochemistry-Enabled 3D Foams for Ultrafast Battery Cathodes.

Metal vanadium phosphates (MVP), particularly Li3V2(PO4)3 (LVP) and Na3V2(PO4)3 (NVP), are regarded as the next-generation cathode materials in lithium/sodium ion batteries. These materials possess desirable properties such as high stability, theoretical capacity, and operating voltages. Yet, low electrical/ionic conductivities of LVP and NVP have limited their applications in demanding devices such as electric vehicles. In this work, a novel synthesis route for the preparation of LVP/NVP micro/mesoporous 3D foams via assembly of elastin-like polypeptides is demonstrated. The as-synthesized MVP 3D foams consist of microporous networks of mesoporous nanofibers, where the surfaces of individual fibers are covered with MVP nanocrystallites. TEM images further reveal that LVP/NVP nanoparticles are about 100-200 nm in diameter, with each particle enveloped by a 5 nm thick carbon shell. The MVP 3D foams prepared in this work exhibit ultrafast rate capabilities (79 mA h g(-1) at 100C and 66 mA h g(-1) at 200C for LVP 3D foams; 73 mA h g(-1) at 100C and 51 mA h g(-1) at 200C for NVP 3D foams) and excellent cycle performance (almost 100% performance retention after 1000 cycles at 100C); their properties are far superior compared to current state-of-the-art active materials.

Recycling bacteria for the synthesis of LiMPO4 (M = Fe, Mn) nanostructures for high-power lithium batteries.

In this work, a novel waste-to-resource strategy to convert waste bacteria into a useful class of cathode materials, lithium metal phosphate (LiMPO4; M = Fe, Mn), is presented. Escherichia coli (E. coli) bacteria used for removing phosphorus contamination from wastewater are harvested and used as precursors for the synthesis of LiMPO4. After annealing, LiFePO4 and LiMnPO4 nanoparticles with dimensions around 20 nm are obtained. These particles are found to be enveloped in a carbon layer with a thickness around 3-5 nm, generated through the decomposition of the organic matter from the bacterial cell cytoplasm. The battery performance for the LiFePO4 is evaluated. A high discharge capacity of 140 mAh g(-1) at 0.1 C with a flat plateau located at around 3.5 V is obtained. In addition, the synthesized particles display excellent stability and rate capabilities. Even under a high C rate of 10 C, a stable discharge capacity of 75.4 mAh g(-1) can still be achieved.

Platinum and palladium nanotubes based on genetically engineered elastin-mimetic fusion protein-fiber templates: synthesis and application in lithium-O2 batteries.

The coupling of proteins with self-assembly properties and proteins that are capable of recognizing and mineralizing specific inorganic species is a promising strategy for the synthesis of nanoscale materials with controllable morphology and functionality. Herein, GPG-AG3 protein fibers with both of these properties were constructed and served as templates for the synthesis of Pt and Pd nanotubes. The protein fibers of assembled GPG-AG3 were more than 10 µm long and had diameters of 20-50 nm. The as-synthesized Pt and Pd nanotubes were composed of dense layers of ~3-5 nm Pt and Pd nanoparticles. When tested as cathodes in lithium-O2 batteries, the porous Pt nanotubes showed low charge potentials of 3.8 V, with round-trip efficiencies of about 65% at a current density of 100 mA g(-1).

Human epidermal keratinocyte cell response on integrin-specific artificial extracellular matrix proteins.

Cell-matrix interactions play critical roles in regulating cellular behavior in wound repair and regeneration of the human skin. In particular, human skin keratinocytes express several key integrins such as alpha5beta1, alpha3beta1, and alpha2beta1 for binding to the extracellular matrix (ECM) present in the basement membrane in uninjured skin. To mimic these key integrin-ECM interactions, artificial ECM (aECM) proteins containing functional domains derived from laminin 5, type IV collagen, fibronectin, and elastin are prepared. Human skin keratinocyte cell responses on the aECM proteins are specific to the cell-binding domain present in each construct. Keratinocyte attachment to the aECM protein substrates is also mediated by specific integrin-material interactions. In addition, the aECM proteins are able to support the proliferation of keratinocyte stem cells, demonstrating their promise for use in skin tissue engineering.

A synergistic capture strategy for enhanced detection and elimination of bacteria.

Despite the advanced detection and sterilization techniques available today, the sensitive diagnosis and complete elimination of bacterial infections remain a significant challenge. A strategy is reported for efficient bacterial capture (ca. 90%) based on the synergistic effect of the nanotopography and surface chemistry of the substrate on bacterial attachment and adhesion. The outstanding bacterial-capture capability of the functionalized nanostructured substrate enables rapid and highly sensitive bacterial detection down to trace concentrations of pathogenic bacteria (10 colony-forming units mL(-1)). In addition, this synergistic biocapture substrate can be used for efficient bacterial elimination and shows great potential for clinical antibacterial applications.

Elastin-based silver-binding proteins with antibacterial capabilities.

AIM: To develop novel elastin-like materials with antibacterial capabilities. MATERIALS & METHODS: Artificial proteins bearing AG3 silver-binding motifs (GPG-AG3) were constructed using genetic engineering. GPG-AG3 materials were prepared as GPG-AG3 protein aggregates as well as chemically crosslinked spin-coated thin films. Both GPG-AG3 protein aggregates and thin films were incubated in silver nitrate solution and characterized using electron microscopy. RESULTS & DISCUSSION: The GPG-AG3 substrates prepared in this work have the ability to nucleate silver under physiological conditions. When tested against gram-negative Escherichia coli bacterial culture, silver-coated GPG-AG3 materials were able to inhibit bacterial growth, confirming their antibacterial properties. CONCLUSION: Antibacterial artificial protein materials were successfully developed, demonstrating promise for use as wound dressings and biomedical implant coatings.

Synthesis and cell adhesive properties of linear and cyclic RGD functionalized polynorbornene thin films.

Described herein is the efficient synthesis and evaluation of bioactive arginine-glycine-aspartic acid (RGD) functionalized polynorbornene-based materials for cell adhesion and spreading. Polynorbornenes containing either linear or cyclic RGD peptides were synthesized by ring-opening metathesis polymerization (ROMP) using the well-defined ruthenium initiator [(H(2)IMes)(pyr)(2)(Cl)(2)Ru═CHPh]. The random copolymerization of three separate norbornene monomers allowed for the incorporation of water-soluble polyethylene glycol (PEG) moieties, RGD cell recognition motifs, and primary amines for postpolymerization cross-linking. Following polymer synthesis, thin-film hydrogels were formed by cross-linking with bis(sulfosuccinimidyl) suberate (BS(3)), and the ability of these materials to support human umbilical vein endothelial cell (HUVEC) adhesion and spreading was evaluated and quantified. When compared to control polymers containing either no peptide or a scrambled RDG peptide, polymers with linear or cyclic RGD at varying concentrations displayed excellent cell adhesive properties in both serum-supplemented and serum-free media. Polymers with cyclic RGD side chains maintained cell adhesion and exhibited comparable integrin binding at a 100-fold lower concentration than those carrying linear RGD peptides. The precise control of monomer incorporation enabled by ROMP allows for quantification of the impact of RGD structure and concentration on cell adhesion and spreading. The results presented here will serve to guide future efforts for the design of RGD functionalized materials with applications in surgery, tissue engineering, and regenerative medicine.

Boundary crossing in epithelial wound healing.

The processes of wound healing and collective cell migration have been studied for decades. Intensive research has been devoted to understanding the mechanisms involved in wound healing, but the role of cell-substrate interactions is still not thoroughly understood. Here we probe the role of cell-substrate interactions by examining in vitro the healing of monolayers of human corneal epithelial (HCE) cells cultured on artificial extracellular matrix (aECM) proteins. We find that the rate of wound healing is dependent on the concentration of fibronectin-derived (RGD) cell-adhesion ligands in the aECM substrate. The wound closure rate varies nearly sixfold on the substrates examined, despite the fact that the rates of migration and proliferation of individual cells show little sensitivity to the RGD concentration (which varies 40-fold). To explain this apparent contradiction, we study collective migration by means of a dynamic Monte Carlo simulation. The cells in the simulation spread, retract, and proliferate with probabilities obtained from a simple phenomenological model. The results indicate that the overall wound closure rate is determined primarily by the rate at which cells cross the boundary between the aECM protein and the matrix deposited under the cell sheet.