Development of a maleic acid-based material to selectively solid-phase extract basic compounds from environmental samples.

This study presents a novel mixed-mode weak cation-exchange (WCX) material. This material was prepared by means of the functionalization of a mesoporous divinylbenzene (DVB) resin with maleic acid (maleic acid-DVB), which yielded a high carboxylic moiety content resulting in WCX interactions as well as suitable specific surface area for reversed-phase interactions. After the optimization of the solid-phase extraction (SPE) protocol to enhance the selectivity of the sorbent, this material was evaluated as a novel WCX sorbent in the SPE of a group of drugs from environmental water samples. The method is based on SPE followed by liquid chromatography (LC) coupled to high resolution mass spectrometry (HRMS) with an Orbitrap analyzer, and was validated and applied for the determination of basic drugs in river, effluent and influent wastewater samples. Maleic acid-DVB sorbent yielded suitable recovery rates (57% to 89%) and an acceptable matrix effect (<32%) thanks to the effective washing step included when these environmental waters were loaded through the novel resin. The method was applied to different environmental water samples and some basic drugs were suitably quantified in these environmental samples.

Solid-phase extraction followed by liquid chromatography-high resolution mass spectrometry to determine synthetic cathinones in different types of environmental water samples.

Synthetic cathinones have become popular in recent years, which would explain why their determination in influent sewage samples has already been documented. In the present study a method based on solid-phase extraction followed by liquid chromatography and high resolution mass spectrometry is developed, validated and applied to determine twelve cathinones and one of their metabolites in different environmental samples including influent and effluent sewage and river water. Two cation-exchange sorbents (Oasis MCX and Oasis WCX) were compared, with better results achieved with Oasis WCX in terms of apparent recoveries (70-100%) and matrix effects (lower than -34%). The method was validated with effluent sewage samples providing suitable figures of merit, with method quantification limits ranging from 1ng/L to 5ng/L and method detection limits from 0.1ng/L to 0.5ng/L for all the compounds. Of the different cathinones studied, three, namely methylone, mephedrone metabolite and methylenedioxypyrovalerone, were quantified at concentration levels of low ng/L in each of the different samples analysed, while a number of the other cathinones were also detected in some of the samples.

Pressurized liquid extraction and liquid chromatography-tandem mass spectrometry applied to determine iodinated X-ray contrast media in sewage sludge.

Pressurized liquid extraction (PLE) has been successfully applied for the first time to the extraction of five iodinated X-ray contrast media from sludge. Once optimized all PLE parameters, the extract has been analyzed by liquid chromatography-tandem mass spectrometry, being the method developed sensible enough to reach limit of quantifications (LOQs) of 25 µg kg(-1) (d.w.). The developed method has been applied to the analysis of sludge from urban sewage treatment plants and although some compounds such as iopromide, diatrizoic acid and iopamidol have been identified, their concentrations have been lower than their LOQs.

Determination of iodinated X-ray contrast media in sewage by solid-phase extraction and liquid chromatography tandem mass spectrometry.

A method for the quantitative determination of five iodinated X-ray contrast media (ICMs) in sewage was developed by solid-phase extraction and high-performance liquid chromatography-tandem mass spectrometry. A fused-core analytical column was successfully applied for the first time for the separation of ICMs. Oasis HLB was selected from the sorbents tested because of its higher recoveries. The optimized method allowed the determination of the ICMs at low ng/L levels in both influent and effluent sewage, with detection limits of 40 ng/L and 10 ng/L for most compounds in influent and effluent sewage, respectively. The five ICMs studied were determined in all samples analysed, with iopromide being the analyte found at the highest concentration (8.9 µg/L), while iopamidol was the analyte found at lowest concentration (1.3 µg/L) in influent sewage. Effluent sewage did not show a significant decrease in ICM concentrations.

Preparation of a polar monolithic stir bar based on methacrylic acid and divinylbenzene for the sorptive extraction of polar pharmaceuticals from complex water samples.

A monolithic, hydrophilic stir bar coating based upon a copolymer of methacrylic acid and divinylbenzene [poly(MAA-co-DVB)] was synthesised and evaluated as a new polymeric phase for the stir bar sorptive extraction (SBSE) of polar compounds from complex environmental water samples. The experimental conditions for the extraction and liquid desorption in SBSE were optimised. Liquid chromatography-triple quadrupole mass spectrometry (LC-MS/MS) was used for the determination of a group of polar pharmaceuticals in environmental water matrices. The extraction performance of the poly(MAA-co-DVB) stir bar was compared to the extraction performance of a commercially available polydimethylsiloxane stir bar; it was found that the former gave rise to significantly higher extraction efficiency of polar analytes (% recovery values near to 100% for most of the studied analytes) than the commercial product. The developed method was applied to determine the studied analytes at low ng L⁻¹ in different complex environmental water samples.

Development and application of a polar coating for stir bar sorptive extraction of emerging pollutants from environmental water samples.

In the present study, a stir bar coated with hydrophilic polymer based on poly(N-vinylpyrrolidone-co-divinylbenzene) was prepared for the sorptive extraction of polar compounds. The main parameters affecting the polymerisation of the coating were investigated. The new stir bar was applied successfully in stir bar sorptive extraction with liquid desorption followed by liquid chromatography-mass spectrometry in tandem with a triple quadrupole for the determination of a group of polar pharmaceuticals and personal care products (PPCPs) in environmental water matrices. Different variables affecting extraction and desorption such as agitation speed, temperature, ionic strength and extraction time were optimised. The results showed that the stir bar is able to enrich the selected analytes effectively. The developed method was applied to determine a group of PPCPs in different complex environmental samples, including river, effluent and influent waste water.

Synthesis and application of hypercrosslinked polymers with weak cation-exchange character for the selective extraction of basic pharmaceuticals from complex environmental water samples.

The synthesis of high specific surface area sorbents (HXLPP-WCX) in the form of hypercrosslinked polymer microspheres with narrow particle size distributions, average particle diameters around 6 microm, and weak cation-exchange (WCX) character, is described. The WCX character arises from carboxylic acid moieties in the polymers, derived from the comonomer methacrylic acid. A novel HXLPP-WCX sorbent with an attractive set of chemical and physical properties was then used in an off-line solid-phase extraction (SPE) protocol for the selective extraction of a group of basic compounds from complex environmental samples, a priority being the clean separation of the basic compounds of interest from acidic compounds and interferences. The separation power of the new sorbent for basic pharmaceuticals was compared to two commercially available, mixed-mode sorbents, namely Oasis WCX and Strata-X-CW. Under identical experimental conditions, HXLPP-WCX was found to deliver both higher capacity and better selectivity in SPE than either of the two commercially available materials. In an optimised SPE protocol, the HXLPP-WCX sorbent gave rise to quantitative and selective extractions of low microg l(-1) levels of basic pharmaceuticals present in 500 ml of river water and 250 ml of effluent waste water.

Hydrophilic hypercrosslinked polymeric sorbents for the solid-phase extraction of polar contaminants from water.

Three new hypercrosslinked polymers with hydrophilic character arising from hydroxyl moieties in their skeletons have been prepared in microsphere format and applied to the off-line solid-phase extraction (SPE) of polar compounds from water samples. For sample volumes of 1000 ml, the recoveries of various polar pesticides, such as oxamyl, methomyl, selected phenolic compounds, as well as some pharmaceuticals, were close to 90%. The HXLPP-polar polymer with the best performance characteristics was applied to real samples. Its performance was also compared to commercially available sorbents, such as LiChrolut EN (hydrophobic, hypercrosslinked), Oasis HLB (hydrophilic, macroporous) and Isolute ENV+ (hydrophilic, hypercrosslinked); the new sorbent out-performed the commercially available sorbents. The polymer was applied successfully in off-line SPE of river water samples followed by liquid chromatography and ultraviolet detection, providing a good linear range and detection limits of 0.2 microg l(-1) for the majority of the compounds, with the exception of oxamyl, methomyl, guaiacol and salicylic acid where the detection limit was 0.5 microg l(-1).

New materials in sorptive extraction techniques for polar compounds.

This paper provides an overview of the new developments in material and format technology that improve the extraction of polar compounds in several extraction techniques. They mainly include solid-phase extraction, but there are also other sorptive extraction techniques, such as stir bar sorptive extraction and solid-phase microextraction that use either fibers or in-tube devices. We focus on new synthesised materials that are both commercially available and "in-house". Most novel materials that enhance the extraction of polar compounds are hydrophilic and have large specific surface area; however, we also cover other leading technologies, such as sol-gel or monolith. We describe the morphological and chemical properties of these new sorbents so that we can better understand them and relate them to their capability of retaining polar compounds. We discuss the extraction efficiency for polar compounds when these polymers are used as sorptive material and compare them to other materials. We also mention some representative examples of applications.