RESUMEN
Hand-intensive work is strongly associated with work-related musculoskeletal disorders (WMSDs) of the hand/wrist and other upper body regions across diverse occupations, including office work, manufacturing, services, and healthcare. Addressing the prevalence of WMSDs requires reliable and practical exposure measurements. Traditional methods like electrogoniometry and optical motion capture, while reliable, are expensive and impractical for field use. In contrast, small inertial measurement units (IMUs) may provide a cost-effective, time-efficient, and user-friendly alternative for measuring hand/wrist posture during real work. This study compared six orientation algorithms for estimating wrist angles with an electrogoniometer, the current gold standard in field settings. Six participants performed five simulated hand-intensive work tasks (involving considerable wrist velocity and/or hand force) and one standardised hand movement. Three multiplicative Kalman filter algorithms with different smoothers and constraints showed the highest agreement with the goniometer. These algorithms exhibited median correlation coefficients of 0.75-0.78 for flexion/extension and 0.64 for radial/ulnar deviation across the six subjects and five tasks. They also ranked in the top three for the lowest mean absolute differences from the goniometer at the 10th, 50th, and 90th percentiles of wrist flexion/extension (9.3°, 2.9°, and 7.4°, respectively). Although the results of this study are not fully acceptable for practical field use, especially for some work tasks, they indicate that IMU-based wrist angle estimation may be useful in occupational risk assessments after further improvements.
Asunto(s)
Algoritmos , Muñeca , Humanos , Muñeca/fisiología , Masculino , Adulto , Femenino , Rango del Movimiento Articular/fisiología , Fenómenos Biomecánicos , Movimiento/fisiología , Mano/fisiología , Articulación de la Muñeca/fisiologíaRESUMEN
BACKGROUND: Neck pain remains a persistent challenge in modern society and is frequently encountered across a wide range of occupations, particularly those involving repetitive and monotonous tasks. It might be expected that patterns of trapezius muscle activity at work, characterized by few breaks and prolonged periods of sustained muscle activity, are linked to neck pain. However, previous cross-sectional studies have generally failed to establish a definitive association. While some longitudinal studies have suggested that extended periods of heightened muscle activity could be a risk factor for neck pain, these findings often relied on limited participant numbers or specific professional groups. This study aimed to investigate the relationship between trapezius muscle activity and neck pain by pooling data from seven Scandinavian research institutes encompassing a diverse range of occupational backgrounds. METHODS: Electromyographic (EMG) data for the upper trapezius muscle, collected during working hours, were coupled with questionnaire responses pertaining to neck pain, individual characteristics, and potential confounding variables for a total of 731 subjects. Additionally, longitudinal data from 258 subjects were available. The various EMG datasets were consolidated into a standardized format, and efforts were made to harmonize inquiries about neck pain. Regression analyses, adjusting for sex and height, were conducted to explore the associations between muscle activity variables and neck pain. An exposure index was devised to quantify the cumulative neck load experienced during working hours and to differentiate between various occupational categories. RESULTS: The cross-sectional data displayed a distinct pattern characterized by positive associations for brief periods of sustained muscle activity (SUMA) and negative associations for prolonged SUMA-periods and neck pain. The longitudinal data exhibited a contrasting trend, although it was not as pronounced as the cross-sectional findings. When employing the exposure index, notable differences in cumulative muscle load emerged among occupational groups, and positive associations with longitudinal neck pain were identified. DISCUSSION: The results suggest that individuals with neck pain experience higher cumulative workloads and extended periods of muscle activity over the long term. In the short term, they appear to compensate by taking frequent short breaks, resulting in a lower cumulative workload. Regardless of their occupation, it is crucial to distribute work breaks throughout the workday to ensure that the cumulative load remains manageable.
Asunto(s)
Electromiografía , Dolor de Cuello , Músculos Superficiales de la Espalda , Humanos , Dolor de Cuello/fisiopatología , Masculino , Femenino , Adulto , Músculos Superficiales de la Espalda/fisiopatología , Estudios Transversales , Persona de Mediana Edad , Descanso/fisiología , Enfermedades Profesionales/fisiopatología , Encuestas y Cuestionarios , Estudios LongitudinalesRESUMEN
An accurate rating of hand activity and force is essential in risk assessment and for the effective prevention of work-related musculoskeletal disorders. However, it is unclear whether the subjective ratings of workers and observers correlate to corresponding objective technical measures of exposure. Fifty-nine workers were video recorded while performing a hand-intensive work task at their workplace. Self-ratings of hand activity level (HAL) and force (Borg CR10) using the Hand Activity Threshold Limit Value® were assessed. Four ergonomist observers, in two pairs, also rated the hand activity and force level for each worker from video recordings. Wrist angular velocity was measured using inertial movement units. Muscle activity in the forearm muscles flexor carpi radialis (FCR) and extensor carpi radialis (ECR) was measured with electromyography root mean square values (RMS) and normalized to maximal voluntary electrical activation (MVE). Kendall's tau-b correlations were statistically significant between self-rated hand activity and wrist angular velocity at the 10th, 50th, and 90th percentiles (0.26, 0.31, and 0.23) and for the ratings of observers (0.32, 0.41, and 0.34). Significant correlations for force measures were found only for observer-ratings in five of eight measures (FCR 50th percentile 0.29, time > 10%MVE 0.43, time > 30%MVE 0.44, time < 5% -0.47) and ECR (time > 30%MVE 0.26). The higher magnitude of correlation for observer-ratings suggests that they may be preferred to the self-ratings of workers. When possible, objective technical measures of wrist angular velocity and muscle activity should be preferred to subjective ratings when assessing risks of work-related musculoskeletal disorders.
RESUMEN
Work-related musculoskeletal disorders (WMSDs) are a major contributor to disability worldwide and substantial societal costs. The use of wearable motion capture instruments has a role in preventing WMSDs by contributing to improvements in exposure and risk assessment and potentially improved effectiveness in work technique training. Given the versatile potential for wearables, this article aims to provide an overview of their application related to the prevention of WMSDs of the trunk and upper limbs and discusses challenges for the technology to support prevention measures and future opportunities, including future research needs. The relevant literature was identified from a screening of recent systematic literature reviews and overviews, and more recent studies were identified by a literature search using the Web of Science platform. Wearable technology enables continuous measurements of multiple body segments of superior accuracy and precision compared to observational tools. The technology also enables real-time visualization of exposures, automatic analyses, and real-time feedback to the user. While miniaturization and improved usability and wearability can expand the use also to more occupational settings and increase use among occupational safety and health practitioners, several fundamental challenges remain to be resolved. The future opportunities of increased usage of wearable motion capture devices for the prevention of work-related musculoskeletal disorders may require more international collaborations for creating common standards for measurements, analyses, and exposure metrics, which can be related to epidemiologically based risk categories for work-related musculoskeletal disorders.
Asunto(s)
Enfermedades Musculoesqueléticas , Enfermedades Profesionales , Salud Laboral , Dispositivos Electrónicos Vestibles , Humanos , Captura de Movimiento , Ergonomía/métodos , Enfermedades Musculoesqueléticas/prevención & control , Enfermedades Musculoesqueléticas/diagnóstico , Enfermedades Profesionales/prevención & control , Enfermedades Profesionales/diagnósticoRESUMEN
Risk assessments of hand-intensive and repetitive work are commonly done using observational methods, and it is important that the methods are reliable and valid. However, comparisons of the reliability and validity of methods are hampered by differences in studies, e.g., regarding the background and competence of the observers, the complexity of the observed work tasks and the statistical methodology. The purpose of the present study was to evaluate six risk assessment methods, concerning inter- and intra-observer reliability and concurrent validity, using the same methodological design and statistical parameters in the analyses. Twelve experienced ergonomists were recruited to perform risk assessments of ten video-recorded work tasks twice, and consensus assessments for the concurrent validity were carried out by three experts. All methods' total-risk linearly weighted kappa values for inter-observer reliability (when all tasks were set to the same duration) were lower than 0.5 (0.15-0.45). Moreover, the concurrent validity values were in the same range with regards to total-risk linearly weighted kappa (0.31-0.54). Although these levels are often considered as being fair to substantial, they denote agreements lower than 50% when the expected agreement by chance has been compensated for. Hence, the risk of misclassification is substantial. The intra-observer reliability was only somewhat higher (0.16-0.58). Regarding the methods ART (Assessment of repetitive tasks of the upper limbs) and HARM (Hand Arm Risk Assessment Method), it is worth noting that the work task duration has a high impact in the risk level calculation, which needs to be taken into account in studies of reliability. This study indicates that when experienced ergonomists use systematic methods, the reliability is low. As seen in other studies, especially assessments of hand/wrist postures were difficult to rate. In light of these results, complementing observational risk assessments with technical methods should be considered, especially when evaluating the effects of ergonomic interventions.
Asunto(s)
Mano , Extremidad Superior , Reproducibilidad de los Resultados , Medición de Riesgo/métodos , Ergonomía/métodosRESUMEN
Vibrotactile feedback training may be used as a complementary strategy to reduce time in demanding postures in manual handling. This study evaluated the short- and medium-term effects of concurrent posture-correction vibrotactile feedback training on trunk inclination exposure in real manual sorting work. Fifteen warehouse workers completed the training and the follow-up sessions. Trunk inclination angles were recorded using the ambulatory Smart Workwear System. Questionnaires were used for assessing system usability, perceived physical exertion, and work ability. The results showed reduced time in trunk inclination >30°, >45°, and >60°, and reductions in the 90th, 95th, and 99th percentile trunk inclination angles, when receiving feedback and immediately after feedback withdrawal. No significant reduction was retained after one and three weeks. The wearer's comfort was scored high, and the feedback did not increase the perceived cognitive demands. No significant effects attributed to changed trunk inclination exposure were observed for perceived physical exertion or work ability. The training program has the potential of contributing to reduced trunk inclination exposure in the short term. Future studies are needed to evaluate if improvements in the feedback training can transfer the short-term results to retained median- and long-term effects.Practitioner summary: A two-day training program with concurrent posture-correction vibrotactile feedback can contribute to reduced exposure of trunk inclination in real manual sorting work in the short term. More research is needed on how to design the feedback training programs in order to be effective in the long term.
Asunto(s)
Salud Laboral , Traumatismos Ocupacionales , Postura , Humanos , Retroalimentación , Encuestas y Cuestionarios , Traumatismos Ocupacionales/prevención & control , Salud Laboral/educación , Evaluación de Programas y Proyectos de SaludRESUMEN
Introduction: Recently developed prismatic loupes may mitigate the high physical workload and risk of neck disorders associated with traditional surgical loupes among surgeons. However, research in this area, particularly among surgeons, is sparse. This study examines the impact of prismatic loupes on surgeons' physical workload, musculoskeletal discomfort, and performance during simulated surgical tasks. Materials and methods: Nineteen out of twenty recruited surgeons performed three tasks in a fixed-order with their own loupes and both low-tilt (LT) and high-tilt (HT) prismatic loupes, in a randomized order. The primary outcomes were the median inclination angles and velocities of the head, trunk, and upper arms, along with the median muscle activity of the cervical erector spinae (CES), upper trapezius (UT), and lumbar erector spinae (LES) for each pair of loupes. The secondary outcomes included performance (completion time and errors), perceived body-part discomfort, and subjective evaluation of the three pairs of loupes. Results: Using prismatic loupes, either LT or HT, compared with the surgeons' own loupes yielded lower head inclinations (all p < 0.001), lower neck muscle activity (all p < 0.05), and lower neck discomfort in indirect comparisons (p < 0.01) with no significant difference in surgical errors (p = 0.628). However, HT loupes resulted in a longer task completion time in two tasks (p < 0.001). Most surgeons preferred LT loupes (N = 12) for their comfort and visual functions. Discussion: The results indicate that prismatic loupes can reduce physical workload in the neck during simulated surgical task, with no significant difference in surgical errors. Future studies are needed to investigate the long-term effects of prismatic loupes among surgeons.
Asunto(s)
Cirujanos , Humanos , Estudios Cruzados , ErgonomíaRESUMEN
We compared hand activity and force ratings in women and men doing identical hand-intensive work tasks. Musculoskeletal disorders are more common in women and hand-intensive work leads to an increased risk of these disorders. Knowledge of the gender influence in the rating of work exposure is lacking. The aim of this study was to investigate whether women and men performing identical hand-intensive work tasks were equally rated using hand activity and normalized peak force levels with the Hand Activity Threshold Limit Value®. Fifty-six workers participated, comprising 28 women-men pairs. Four observers-two woman-man pairs-were also involved. Self-ratings and observers' ratings of hand activity and force level were collected. The results of these ratings showed no significant gender differences in self-rated hand activity and force, as well as observer-rated hand activity. However, there was a significant gender difference in the observer-rated force, where the women were rated higher (mean (SD): women 3.9 (2.7), men 3.1 (1.8) (p = 0.01)). This difference remained significant in the adjusted model (p = 0.04) with grip strength and forearm-finger anthropometrics. The results provide new insights that observers' estimates of force can be higher in women compared with men in the same work tasks. Force should be further investigated and preferably compared to objective measurements.
Asunto(s)
Enfermedades Musculoesqueléticas , Análisis y Desempeño de Tareas , Masculino , Humanos , Femenino , Mano , Extremidad Superior , Dedos , Enfermedades Musculoesqueléticas/epidemiología , Enfermedades Musculoesqueléticas/etiología , Fuerza de la ManoRESUMEN
Background: Musculoskeletal disorders (MSDs) are critical occupational and social problems. With the improvement of production mechanization and automation, and the widespread application of computers, more occupations are exposed to static postures and load. This study explored the role of inflammation in the association between static postures exposure and MSDs. Methods: This study adopted a prospective nested case-control design in which 66 lower back MSDs cases and 66 healthy controls were selected from a cohort study of university employees. The personal information, postural load, musculoskeletal symptoms, pressure pain thresholds (PPTs), and inflammatory cytokines were collected. Logistic and linear regressions were used to investigate the association among postural load, inflammatory cytokines, and lower back MSDs. Mediation analysis was used to calculate the mediation effect. Results: The results of logistic and linear regressions showed that postural load and inflammatory cytokines were positively associated with lower back MSDs (P < 0.05), and postural load was positively associated with inflammatory cytokines (P < 0.05). Further, mediation analysis showed that the mediation effect of postural load on the lower back MSDs through TNF-α was 0.073 (95%CI: 0.025-0.128), and the mediation effect of posture load on the lower back MSDs through IL-6 was 0.098 (95%CI: 0.041-0.179), respectively. Conclusion: Static postures were associated with the occurrence of MSDs through inflammatory cytokines, and low-level inflammation may be a critical early event in the generation of MSDs. This study may help bridge the gap of potential mechanisms linking static postures to increased risks of MSDs, and provide new evidence for targeted protection against the global increasing MSDs.
Asunto(s)
Enfermedades Musculoesqueléticas , Enfermedades Profesionales , Humanos , Enfermedades Profesionales/epidemiología , Enfermedades Profesionales/prevención & control , Universidades , Estudios Prospectivos , Estudios de Cohortes , Enfermedades Musculoesqueléticas/epidemiología , Enfermedades Musculoesqueléticas/etiología , Postura , Inflamación , CitocinasRESUMEN
INTRODUCTION: Multi-site musculoskeletal symptoms (MSS) are considered to be more common and have more serious consequences than single-site MSS. This study aimed to determine whether derived patterns of MSS may be identified in electronic assembly workers and if extracted MSS classes are associated with personal and work-related factors. METHOD: A cross-sectional questionnaire study was performed with 700 participating electronic assembly workers. The questionnaire included individual factors, psychosocial and physical exposures, and MSS. The derived patterns of MSS and their relationships with ergonomic factors were analyzed using latent class analysis (LCA) and multinomial logistic regression models (MLRM). RESULTS: The 1-year prevalence of MSS affecting only one body site or two or more body sites was 14.9% and 32.7%, respectively. The results of LCA showed three distinct classes of MSS patterns, which were labelled 'MSS in most sites' (5.0%), 'MSS in neck and shoulder' (27.0%), and 'MSS in one or no site' (68.0%). The results of MLRM showed that the 'MSS in neck and shoulder' was associated with job tenure (OR 5.579, 95% CI 2.488-12.511), excessive dynamic and static loads (OR 3.868, 95% CI 1.702-8.793 and OR 5.270, 95% CI 2.020-13.747, respectively); while the 'MSS in most sites' was associated with high job demands (OR 4.528, 95% CI 1.647-12.445) and excessive dynamic loads (OR 111.554, 95% CI 4.996-2490.793). CONCLUSIONS: The results showed unique patterns of MSS among electronic assembly workers that were associated with personal and work-related factors. PRACTICAL APPLICATIONS: The findings highlight that the high prevalence of multi-site MSS in this group should be a focus. It also provides further evidence that LCA considering the number and location of anatomical sites involving MSS can be used to determine distinct classes of MSS patterns, which is of great significance for the epidemiological study and management of MSS in the future.
Asunto(s)
Enfermedades Musculoesqueléticas , Enfermedades Profesionales , Estudios Transversales , Electrónica , Ergonomía , Humanos , Análisis de Clases Latentes , Prevalencia , Factores de Riesgo , Encuestas y CuestionariosRESUMEN
Sensor type (accelerometers only versus inertial measurement units, IMUs) and angular velocity computational method (inclination versus generalized velocity) have been shown to affect the measurements of arm and trunk movements. This study developed models for conversions between accelerometer and IMU measurements of arm and trunk inclination and between accelerometer and IMU measurements of inclination and generalized (arm) velocities. Full-workday recordings from accelerometers and IMUs of arm and trunk postures and movements from 38 warehouse workers were used to develop 4 angular (posture) and 24 angular velocity (movement) conversion models for the distributions of the data. A power function with one coefficient and one exponent was used, and it correlated well (r2 > 0.999) in all cases to the average curves comparing one measurement with another. These conversion models facilitate the comparison and merging of measurements of arm and trunk movements collected using the two sensor types and the two computational methods.
RESUMEN
OBJECTIVE: Forward bending of the back is common in many jobs and a risk factor for sickness absence. However, this knowledge is based on self-reported forward bending that is generally imprecise. Thus, we aimed to investigate the dose-response relation between device-measured forward bending at work and prospective register-based risk of long-term sickness absence (LTSA). METHODS: At baseline, 944 workers (93% from blue-collar jobs) wore accelerometers on their upper back and thigh over 1-6 workdays to measure worktime with forward bending (>30Ë and >60Ë) and body positions. The first event of LTSA (≥6 consecutive weeks) over a 4-year follow-up were retrieved from a national register. Compositional Cox proportional hazard analyses were used to model the association between worktime with forward bending of the back in an upright body position and LTSA adjusted for age, sex, body mass index (BMI), occupational lifting/carrying, type of work, and, in an additional step, for leisure time physical activity (PA) on workdays. RESULTS: During a mean worktime of 457 minutes/day, the workers on average spent 40 and 10 minutes on forward bending >30Ë and >60Ë in the upright position, respectively. Five more minutes forward bending >30Ë and >60Ë at work were associated with a 4% [95% confidence interval (CI) 1.01-1.07] and 8% (95% CI 1.01-1.16) higher LTSA risk, respectively. Adjustment for leisure-time PA did not influence the results. CONCLUSION: We found a dose-response association between device-measured forward bending of the back and prospective LTSA risk. This knowledge can be integrated into available feasible methods to measure forward bending of the back for improved workplace risk assessment and prevention.
Asunto(s)
Análisis de Datos , Ausencia por Enfermedad , Humanos , Estudios Prospectivos , Lugar de Trabajo , Ocupaciones , DinamarcaRESUMEN
BACKGROUND: Musculoskeletal disorders (MSDs) are common among surgeons, and its prevalence varies among surgical modalities. There are conflicting results concerning the correlation between adverse work exposures and MSD prevalence in different surgical modalities. The progress of rationalization in health care may lead to job intensification for surgeons, but the literature is scarce regarding to what extent such intensification influences the physical workload in surgery. The objectives of this study were to quantify the physical workload in open surgery and compare it to that in (1) nonsurgical tasks and (2) two surgeon roles in robot-assisted surgery (RAS). METHODS: The physical workload of 22 surgeons (12 performing open surgery and 10 RAS) was measured during surgical workdays, which includes trapezius muscle activity from electromyography, and posture and movement of the head, upper arms and trunk from inertial measurement units. The physical workload of surgeons in open surgery was compared to that in nonsurgical tasks, and to the chief and assistant surgeons in RAS, and to the corresponding proposed action levels. Mixed-effects models were used to analyze the differences. RESULTS: Open surgery constituted more than half of a surgical workday. It was associated with more awkward postures of the head and trunk than nonsurgical tasks. It was also associated with higher trapezius muscle activity levels, less muscle rest time and a higher proportion of sustained low muscle activity than nonsurgical tasks and the two roles in RAS. The head inclination and trapezius activity in open surgery exceeded the proposed action levels. CONCLUSIONS: The physical workload of surgeons in open surgery, which exceeded the proposed action levels, was higher than that in RAS and that in nonsurgical tasks. Demands of increased operation time may result in higher physical workload for open surgeons, which poses an increased risk of MSDs. Risk-reducing measures are, therefore, needed.
Asunto(s)
Enfermedades Musculoesqueléticas , Procedimientos Quirúrgicos Robotizados , Cirujanos , Humanos , Procedimientos Quirúrgicos Robotizados/efectos adversos , Carga de Trabajo , Ergonomía , Postura/fisiología , Enfermedades Musculoesqueléticas/epidemiologíaRESUMEN
Using a novel approach, this exploratory study investigated whether the physical activity (PA) paradox extends to cardiovascular load and musculoskeletal pain. At baseline, 1-2 days of 24 h heart rate was assessed in 72 workers from construction and healthcare. Workers then reported pain intensity in 9 body regions (scale 0-3) every 6 months for two years. The 2 year average of musculoskeletal pain (sum of 9 pain scores; scale 0-27) was regressed on time spent during work and leisure above three thresholds of percentage heart rate reserve (%HRR), i.e., ≥20 %HRR, ≥30 %HRR, and ≥40 %HRR, using a novel ilr structure in compositional data analysis. Analyses were stratified for several important variables. Workers spending more time in physical activity at work had higher pain, while workers with more time in physical activity during leisure had less pain (i.e., the PA paradox), but none of the associations were statistically significant. Higher aerobic capacity and lower body mass index lowered the pain score among those with higher physical activity at work. This exploratory study suggests that the PA paradox may apply to musculoskeletal pain and future studies with larger sample sizes and additional exposure analyses are needed to explain why this occurs.
Asunto(s)
Dolor Musculoesquelético , Ejercicio Físico/fisiología , Personal de Salud , Frecuencia Cardíaca , Humanos , Actividades Recreativas , Dolor Musculoesquelético/epidemiologíaRESUMEN
OBJECTIVE: To survey the prevalence of lower extremity musculoskeletal disorders (MSDs) among Chinese manufacturing workers, and to identify the associated factors. DESIGN: Observational study with cross-sectional design. SETTING: A self-administered questionnaire survey was conducted in four manufacturing factories in China. PARTICIPANTS: 7908 manufacturing workers were included in this study after excluding non-conforming personnel. OUTCOME MEASURES: Individual and work-related information, and MSDs in the whole leg and knee region were measured by the anonymous self-administered questionnaire. Individual and work-related factors associated with MSDs and their effects were identified through multivariate logistic regression. RESULTS: Of all respondents, 3241 (41.0%) reported having had lower extremity MSDs in the recent 12 months, and for the knees, ankles/feet and hips/thighs were 29.5%, 23.9% and 16.7%, respectively. After confounder-adjusted single-factor analysis, 22 variables (of 24) were significantly related to the disorders. Factors like always kneeling/squatting for long periods, always standing for long periods and often lifting in an uncomfortable position were shown to have higher risks, with ORs of 2.77 (95% CI: 2.33 to 3.30), 2.30 (1.96 to 2.69) and 2.25 (2.04 to 2.47). Comparable results were found on knee disorders. The final model included 15 variables of demography, biomechanics and work organisation. The following factors showed increased risks of lower extremity MSDs: being female, being older, longer working years, higher body mass index (BMI), keeping the same posture for a long time, awkward position, shift work and monotonous work. Whereas having enough breaks reduced the risk. CONCLUSION: The prevalence of lower extremity MSDs among Chinese manufacturing workers is high. The most commonly affected body regions were the knees and ankles/feet. Multiple factors were found associated with lower extremity MSDs including age, BMI, work experience, work organisations, physical ergonomics exposures, etc.
Asunto(s)
Enfermedades Musculoesqueléticas , Enfermedades Profesionales , China/epidemiología , Estudios Transversales , Femenino , Humanos , Extremidad Inferior , Masculino , Enfermedades Musculoesqueléticas/etiología , Enfermedades Profesionales/epidemiología , Enfermedades Profesionales/etiología , Prevalencia , Factores de Riesgo , Encuestas y CuestionariosRESUMEN
OBJECTIVE: Elevated arm work is prevalent in many jobs. Feasible device-based methods are available to measure elevated arm work. However, we lack knowledge on the association between device-measured elevated arm work and prospective risk of long-term sickness absence (LTSA). We aimed to investigate this association. METHODS: At baseline, 937 workers wore accelerometers on the right arm and thigh over 1-5 workdays to measure work time spent with elevated arms in an upright position. Between baseline and 4-year prospective follow-up in the national registers, we obtained information on the individuals` first event of LTSA (≥6 consecutive weeks). We performed compositional Cox proportional hazard analyses to model the association between work time with arm elevation >30Ë, >60Ë, or >90Ë and the probability of LTSA. RESULTS: Workers spent 21% of their work time with >30Ë arm elevation, 4% with >60Ë arm elevation, and 1% with >90Ë arm elevation; in the upright body position. We found a positive dose-response association between work time spent with elevated arm work and the risk of LTSA. Specifically, we found that increasing two minutes of work time spent with arm elevation at (i) >90Ë increased the risk of LTSA by 14% [hazard ratio (HR) 1.14, 95% confidence intervals (95% CI 1.04-1.25)] (ii) >60Ë increased the LTSA risk by 3% (HR 1.03, 95% CI 1.03-1.06), and (iii) >30Ë increased the LTSA risk by 1% (HR 1.01, 95% CI 1.00-1.02). CONCLUSION: Device-measured elevated arm work is associated with increased prospective LTSA. This information ought to be brought into preventive workplace practice by accessible and feasible device-based methods of elevated arm work.
Asunto(s)
Brazo , Ausencia por Enfermedad , Acelerometría , Humanos , Estudios Prospectivos , Lugar de TrabajoRESUMEN
Inclinometry and video analyses can provide objective measures of physical workloads. The study aim was to measure and observe arm, back and head postures and movements among forklift truck operators (FLTOs) during a working day, analyzing differences between types of forklift trucks and to assess reported workload and health. Twenty-five male FLTOs in a high-level warehouse were randomly included. The data collected comprised technical measurements, video analyses of postures and movements, and a questionnaire measuring health, pain and workload. On average, the FLTOs rotated their head more than 45°, in total, 232 times/h. Video analysis revealed that FLTOs periodically drive the forklift truck sideways with the head rotated in the direction of travel, and in periods look upwards, in which the head is highly rotated and extended. Inclinometry and observations during the working day has the potential to be a valuable part of risk assessment promoting occupational safety and health.
Asunto(s)
Enfermedades Profesionales , Salud Laboral , Humanos , Masculino , Vehículos a Motor , Movimiento , Postura , Carga de TrabajoRESUMEN
Objective. The aim of this qualitative study was to explore how ergonomists experienced an e-learning concept as a tool for knowledge translation; furthermore, to explore what, if any, impact the knowledge translation had regarding the ergonomists' work with risk assessments. Methods. Twelve Swedish ergonomists employed in the occupational health service (OHS) participated in a research project, which included an e-learning program in risk assessment training. Focus group interviews and individual interviews were used for data collection. Results. The ergonomists appreciated the e-learning concept, e.g., its flexibility enabled them to decide when and where to practice. The concept was considered feasible within the context of the OHS. The ergonomists experienced an increased knowledge of different observation-based risk assessment tools, which expanded their professional toolboxes. Additionally, they began to reflect more regarding the reliability of risk assessment tools and how to enhance quality in risk assessment assignments. Conclusion. This study showed that e-learning may comprise an efficient knowledge translation for improved risk assessments in the OHS. The program contributed to changes in ergonomists' risk assessment procedures, e.g., in the selection of tools, increasing the number of observers, employing a participatory approach and more often actively involving stakeholders during the risk assessment process.
Asunto(s)
Servicios de Salud del Trabajador , Humanos , Ocupaciones , Investigación Cualitativa , Reproducibilidad de los Resultados , Medición de Riesgo/métodosRESUMEN
BACKGROUND: In the 90s, digital human manikins (DHMs) were introduced in planning of workstations, by static or semi-static simulations. Modern DHMs can simulate dynamic work and offer a rapid way for a virtual pre-production ergonomic evaluation. Work-related musculoskeletal disorders may affect surgical performance and patient safety. A prototype of an open console, which is contrary to the conventional closed consoles and may be seen as a representative for a new generation, has been designed to reduce workload for robotic surgery surgeons. OBJECTIVE: The aim of this project was to test a new DHM tool with improved usability to evaluate the ergonomics of a console of a robotic surgical system in a pre-production stage. METHODS: The DHM tool IMMA was used together with a 3D model of the prototype console. Twelve manikins who represented females and males from two national populations were introduced. Manikin-console distances, after console adjustments per manikin, were compared with a US checklist and Swedish standard for VDU work. RESULTS: The DHM tool was useful for this case, but the distances of the checklist and the standard were needed to be obtained "manually". The automatic functions of the DHM worked smoothly but were not optimized for VDU work. The prototype fulfilled most, but not all, of the ergonomic criteria of the checklist and the standard. CONCLUSIONS: There is room for improvements of the adjustable ranges of the console prototype. DHMs may facilitate rapid pre-production evaluation of workstations for static work; if ergonomic assessment models for VDU work are built-in, there may be a revival of DHMs in static work situations.