In vitro in vivo relations for the parenteral liposomal formulation of Amphotericin B: A biorelevant and clinically relevant approach.

There is limited information on how to perform in vitro release tests for intravenously administered parenteral formulations and how to relate the in vitro release with an in vivo pharmacokinetic parameter after the administration of the formulation. In this study, the effect of hydrodynamics (using sample and separate and continuous flow conditions) and medium components (synthetic surfactants, albumin and buffers) on the release of Amphotericin B from the liposomal Ambisome® formulation were investigated. Pharmacokinetic modeling of plasma concentration profiles from healthy subjects administered Ambisome® was used to estimate the in vivo release rate constant of drug from the formulation in order to compare it with the in vitro release profiles. With the estimated in vivo and in vitro release rate constants, release profiles were generated. Two approaches were followed: comparison of in vivo and in vitro release rate constants and comparison of the area under the percent release-time curve from observed in vitro release data and simulated in vivo release data. Albumin was found to be most critical factor for the release of the drug by having a negative effect on the amount of Amphotericin B released. The release profiles obtained with the sample and separate method in both Krebs Ringer buffer- and Phosphate Saline buffer - albumin 4.0% w/v were predictive of the in vivo release profiles in healthy subjects. Determining the factors affecting drug release from parenteral formulations and relating the release profiles to a pharmacokinetic parameter in vivo supports the development of in vitro in vivo relations for parenteral products.

In Vivo Predictive Dissolution Testing of Montelukast Sodium Formulations Administered with Drinks and Soft Foods to Infants.

In vitro dissolution testing conditions that reflect and predict in vivo drug product performance are advantageous, especially for the development of paediatric medicines, as clinical testing in this population is hindered by ethical and technical considerations. The aim of this study was to develop an in vivo predictive dissolution test in order to investigate the impact of medicine co-administration with soft food and drinks on the dissolution performance of a poorly soluble compound. Relevant in vitro dissolution conditions simulating the in vivo gastrointestinal environment of infants were used to establish in vitro-in vivo relationships with corresponding in vivo data. Dissolution studies of montelukast formulations were conducted with mini-paddle apparatus on a two-stage approach: infant fasted-state simulated gastric fluid (Pi-FaSSGF; for 1 h) followed by either infant fasted-state or infant fed-state simulated intestinal fluid (FaSSIF-V2 or Pi-FeSSIF, respectively; for 3 h). The dosing scenarios tested reflected in vivo paediatric administration practices: (i.) direct administration of formulation; (ii.) formulation co-administered with vehicles (formula, milk or applesauce). Drug dissolution was significantly affected by co-administration of the formulation with vehicles compared with after direct administration of the formulation. Montelukast dissolution from the granules was significantly higher under fed-state simulated intestinal conditions in comparison with the fasted state and was predictive of the in vivo performance when the granules are co-administered with milk. This study supports the potential utility of the in vitro biorelevant dissolution approach proposed to predict in vivo formulation performance after co-administration with vehicles, in the paediatric population.

BCS-based biowaivers: Extension to paediatrics.

A BCS-based biowaiver allows extrapolation of drug product bioequivalence (when applicable) based on the BCS class of the drug and in vitro dissolution testing. Drug permeability and solubility considerations for adult BCS might not apply directly to paediatric subpopulations and bridging of adult and paediatric formulations should be undertaken with caution. The aims of this study were to: (i.) identify compounds which would change drug solubility classification in the paediatric population, and (ii.) to assess the risk of extending BCS-based biowaiver criteria into paediatric products of these compounds. Amoxicillin, prednisolone, and amlodipine were selected as the model compounds. Dissolution studies of IR formulations of these compounds were conducted with USP II (paddle) and mini-paddle apparatus, in media of three pHs (pH 1.2, 4.5 and 6.8). Three dissolution setups were tested: (1) 'typical' BCS-based biowaiver conditions, (2) "BE" setup derived from BE study protocols (volume: 250 mL), and (3) "paediatric" setup based on representative volume for the paediatric population (50 mL). Results revealed that extension of regulated BCS-based biowaiver criteria for paediatric application is not as simple as scaling down volumes. It was further shown that BCS-based biowaiver criteria should not be applied when there is the risk of change of the drug solubility class, from the adult to paediatric populations. A deeper knowledge of the paediatric gastrointestinal environment is still lacking and would assist in refining the biopharmaceutical tools needed to appropriately evaluate formulation performance across age groups. This would potentially reduce the number of clinical studies required and speed up formulation development.

Biopharmaceutical implications of excipient variability on drug dissolution from immediate release products.

Elucidating the impact of excipient variability on oral product performance in a biopharmaceutical perspective would be beneficial and allow excipient implementation on Quality by Design (QbD) approaches. The current study investigated the impact of varying viscosity of binders (hypromellose (HPMC)) and superdisintegrants (sodium starch glycolate (SSG)) and particle size distribution of lubricants (magnesium stearate (MgSt)) on the in vitro dissolution of a highly and a poorly soluble drug from immediate release formulations. Compendial (pharmacopoeia buffers) and biorelevant (media simulating the gastrointestinal fluids) media and the USP 2 and USP 4 apparatuses were used to assess the exerted excipient effects on drug dissolution. Real-time dissolution UV imaging provided mechanistic insights into disintegration and dissolution of the immediate release formulations. Varying the viscosity type of HPMC or SSG did not significantly affect drug dissolution irrespective of the compound used. Faster drug dissolution was observed when decreasing the particle size of MgSt for the highly soluble drug. The use of real-time dissolution UV Imaging revealed the influential role of excipient variability on tablet disintegration, as for the highly soluble drug, tablets containing high viscosity HPMC or low particle size MgSt disintegrated faster as compared to the control tablets while for the poorly soluble drug, slower tablet disintegration was observed when increasing the viscosity of the HPMC as compared to the control tablets. Changes in drug dissolution when varying excipients may be anticipated if the excipient change has previously affected drug solubility. The use of multivariate data analysis revealed the influential biopharmaceutical factors such as critical excipient types/properties, drug aqueous solubility, medium/hydrodynamic characteristics affecting the impact of excipient variability on in vitro drug dissolution.

Impact of Food and Drink Administration Vehicles on Paediatric Formulation Performance: Part 1-Effects on Solubility of Poorly Soluble Drugs.

Food and drinks are commonly used to facilitate administration of paediatric medicines to improve palatability and enhance patient compliance. However, the impact of this practice on drug solubility and on oral drug bioavailability is not usually studied. Based on recommended strategies for oral administration of paediatric medicines with food and drink vehicles, the aims of this study were (i) to measure the physicochemical properties of (soft) food and drink vehicles, commonly mixed with paediatric medicines prior to administration, and (ii) to assess the impact of the co-administered vehicles on the solubility of two poorly soluble paediatric drugs. Montelukast (sodium) and mesalazine were selected as the model compounds. Distinct differences were observed between the physicochemical properties (i.e. pH, surface tension, osmolality, viscosity and buffer capacity) and macronutrient composition (i.e. fat, sugar and protein content) of the different soft foods and drinks, not only among vehicle type but also within vehicles of the same subtype. Solubility studies of the two model compounds in selected drinks and soft foods resulted in considerably different drug solubility values in each vehicle. The solubility of the drugs was significantly affected by the vehicle physicochemical properties and macronutrient composition, with the solubility of montelukast being driven by the pH, fat and protein content of the vehicles and the solubility of mesalazine by vehicle osmolality, viscosity and sugar content. This vehicle-dependent impact on drug solubility could compromise its bioavailability, and ultimately affect the safety and/or efficacy of the drug and should be taken into consideration during paediatric product development.

In vitro - in vivo relations for the parenteral liposomal formulation of Amphotericin B: A clinically relevant approach with PBPK modeling.

In vitro release testing is a useful tool for the quality control of controlled release parenteral formulations, but in vitro release test conditions that reflect or are able to predict the in vivo performance are advantageous. Therefore, it is important to investigate the factors that could affect drug release from formulations and relate them to in vivo performance. In this study the effect of media composition including albumin presence, type of buffer and hydrodynamics on drug release were evaluated on a liposomal Amphotericin B formulation (Ambisome®). A physiologically based pharmacokinetic (PBPK) model was developed using plasma concentration profiles from healthy subjects, in order to investigate the impact of each variable from the in vitro release tests on the prediction of the in vivo performance. It was found that albumin presence was the most important factor for the release of Amphotericin B from Ambisome®; both hydrodynamics setups, coupled with the PBPK model, had comparable predictive ability for simulating in vivo plasma concentration profiles. The PBPK model was extrapolated to a hypothetical hypoalbuminaemic population and the Amphotericin B plasma concentration and its activity against fungal cells were simulated. Selected in vitro release tests for these controlled release parenteral formulations were able to predict the in vivo AmB exposure, and this PBPK driven approach to release test development could benefit development of such formulations.

Biopharmaceutical Understanding of Excipient Variability on Drug Apparent Solubility Based on Drug Physicochemical Properties: Case Study-Hypromellose (HPMC).

Identification of the biopharmaceutical risks of excipients and excipient variability on oral drug performance can be beneficial for the development of robust oral drug formulations. The current study investigated the impact of Hypromellose (HPMC) presence and varying viscosity type, when used as a binder in immediate release formulations, on the apparent solubility of drugs with wide range of physicochemical properties (drug ionization, drug lipophilicity, drug aqueous solubility). The role of physiological conditions on the impact of excipients on drug apparent solubility was assessed with the use of pharmacopoeia (compendial) and biorelevant media. Presence of HPMC affected drug solubility according to the physicochemical properties of studied compounds. The possible combined effects of polymer adsorption (drug shielding effect) or the formation of a polymeric viscous layer around drug particles may have retarded drug dissolution leading to reduced apparent solubility of highly soluble and/or highly ionized compounds and were pronounced mainly at early time points. Increase in the apparent solubility of poorly soluble low ionized drugs containing a neutral amine group was observed which may relate to enhanced drug solubilization or reduced drug precipitation. The use of multivariate data analysis confirmed the importance of drug physicochemical properties on the impact of excipients on drug apparent solubility and revealed that changes in HPMC material properties or amount may not be critical for oral drug performance when HPMC is used as a binder. The construction of a roadmap combining drug, excipient, and medium characteristics allowed the identification of the cases where HPMC presence may present risks in oral drug performance and bioavailability.

Surface dissolution UV imaging for characterization of superdisintegrants and their impact on drug dissolution.

Superdisintegrants are a key excipient used in immediate release formulations to promote fast tablet disintegration, therefore understanding the impact of superdisintegrant variability on product performance is important. The current study examined the impact of superdisintegrant critical material attributes (viscosity for sodium starch glycolate (SSG), particle size distribution (PSD) for croscarmellose sodium (CCS)) on their performance (swelling) and on drug dissolution using surface dissolution UV imaging. Acidic and basic pharmacopoeia (compendial) media were used to assess the role of varying pH on superdisintegrant performance and its effect on drug dissolution. A highly soluble (paracetamol) and a poorly soluble (carbamazepine) drug were used as model compounds and drug compacts and drug-excipient compacts were prepared for the dissolution experiments. The presence of a swelled SSG or CCS layer on the compact surface, due to the fast excipient hydration capacity, upon contact with dissolution medium was visualized. The swelling behaviour of superdisintegrants depended on excipient critical material attributes and the pH of the medium. Drug dissolution was faster in presence compared to superdisintegrant absence due to improved compact wetting or compact disintegration. The improvement in drug dissolution was less pronounced with increasing SSG viscosity or CCS particle size. Drug dissolution was slightly more complete in basic compared to acidic conditions in presence of the studied superdisintegrants for the highly soluble drug attributed to the increased excipient hydration capacity and the fast drug release through the swelled excipient structure. The opposite was observed for the poorly soluble drug as potentially the improvement in drug dissolution was compromised by drug release from the highly swelled structure. The use of multivariate data analysis revealed the influential role of excipient and drug properties on the impact of excipient variability on drug dissolution.

Investigation and simulation of dissolution with concurrent degradation under healthy and hypoalbuminaemic simulated parenteral conditions- case example Amphotericin B.

Guidance on dissolution testing for parenteral formulations is limited and not often related in vivo performance. Critically ill patients represent a target cohort, frequently hypoalbuminaemic, to whom certain parenteral formulations are administered. Amphotericin B (AmB) is a poorly soluble, highly protein-bound drug, available as lipid-based formulations and used in critical illness. The aim of this study was to develop media representing hypoalbuminaemic and healthy plasma, and to understand and simulate the dissolution profile of AmB in biorelevant media. Dissolution media were prepared with bovine serum albumin (BSA) in Krebs-Ringer buffer, and tested in a flow through cell apparatus and a bottle/stirrer setup. Drug activity was tested against Candida albicans. BSA concentration was positively associated with solubility, degradation rate and maximum amount dissolved and negatively associated with dissolution rate constant and antifungal activity. In the bottle/stirrer setup, a biexponential model successfully described simultaneous dissolution and degradation and increased in agitation reduced the discriminatory ability of the test. The hydrodynamics provided by the flow-through cell apparatus was not adequate to dissolve the drug. Establishing discriminating test methods with albumin present in the dissolution media, representing the target population, supports future development of biorelevant and clinically relevant tests for parenteral formulations.

Biopharmaceutical aspects and implications of excipient variability in drug product performance.

Implementation of Quality by Design approaches in pharmaceutical industry requires a sound understanding of the parameters triggering final product variability. Excipients, although generally regarded as inert components, are of great significance in terms of solid dosage form development and any variation in the material attributes may impact drug product performance. Sourcing, production and processing are contributing factors to excipient variability. Interchange between different suppliers can lead to final products with different quality attributes. Identification of excipient critical material attributes is not straightforward, as criticality must be linked to functionality and it is well recognized that the mechanisms by which excipients exert their action are not fully understood. Investigating the impact of excipient variability on in vitro dissolution could enable scientists to get an insight on the in vivo behavior of drug products and potentially tolerate variability. A thorough understanding of excipient material properties, product components interactions and the effect of the gastrointestinal tract heterogeneity on excipients and drug release is recommended. This review aims to present current knowledge on excipient critical material attributes and their link to biopharmaceutical behavior and dissolution characteristics. Attempts to describe the impact of physiological conditions on excipient functionality are also addressed. Excipient properties that are considered crucial to drug product performance in a biorelevant perspective are elucidated.

Understanding and predicting the impact of critical dissolution variables for nifedipine immediate release capsules by multivariate data analysis.

In this study the selection of in vivo predictive in vitro dissolution experimental set-ups using a multivariate analysis approach, in line with the Quality by Design (QbD) principles, is explored. The dissolution variables selected using a design of experiments (DoE) were the dissolution apparatus [USP1 apparatus (basket) and USP2 apparatus (paddle)], the rotational speed of the basket/or paddle, the operator conditions (dissolution apparatus brand and operator), the volume, the pH, and the ethanol content of the dissolution medium. The dissolution profiles of two nifedipine capsules (poorly soluble compound), under conditions mimicking the intake of the capsules with i. water, ii. orange juice and iii. an alcoholic drink (orange juice and ethanol) were analysed using multiple linear regression (MLR). Optimised dissolution set-ups, generated based on the mathematical model obtained via MLR, were used to build predicted in vitro-in vivo correlations (IVIVC). IVIVC could be achieved using physiologically relevant in vitro conditions mimicking the intake of the capsules with an alcoholic drink (orange juice and ethanol). The multivariate analysis revealed that the concentration of ethanol used in the in vitro dissolution experiments (47% v/v) can be lowered to less than 20% v/v, reflecting recently found physiological conditions.

An in vitro-in vivo correlation study for nifedipine immediate release capsules administered with water, alcoholic and non-alcoholic beverages: Impact of in vitro dissolution media and hydrodynamics.

The impact of hydrodynamics and media composition on nifedipine dissolution profile from IR (immediate release) soft capsules was investigated using dissolution apparatus USP1, USP2, USP3 and USP4 (United State Pharmacopoeia). Media composition was varied in terms of pH and content, to mimic the dosage form intake with water or non-alcoholic beverages (orange juice) and alcoholic beverages (orange juice/ethanol mixture (47% v/v)). Through construction of in vitro-in vivo correlations (IVIVC) with corresponding in vivo data from the literature, it was possible to evaluate the in vitro conditions that are likely to simulate the in vivo formulation behaviour. Both linear and nonlinear correlations were obtained depending on experimental set-ups. Testing of 20mg nifedipine capsules in FaSSGFst (Fasted State Simulated Gastric Fluid pH 1.6; water administration) produced IVIVC with the USP3 (after time scaling) and USP4 apparatus. IVIVC were obtained for USP2, USP3 and USP4 in FaSSGFoj (Fasted State Simulated Gastric Fluid pH 3.4; orange juice administration). Linear and nonlinear correlations were obtained with the USP1, USP2 and USP3 apparatus when testing the capsules in FaSSGFoj/EtOH (orange juice/ethanol administration). This study highlighted that selection of physiologically relevant dissolution set-ups is critical for predicting the in vivo impact of formulations co-administration with water, non-alcoholic and alcoholic beverages.

BU08073 a buprenorphine analogue with partial agonist activity at µ-receptors in vitro but long-lasting opioid antagonist activity in vivo in mice.

BACKGROUND AND PURPOSE: Buprenorphine is a potent analgesic with high affinity at µ, δ and κ and moderate affinity at nociceptin opioid (NOP) receptors. Nevertheless, NOP receptor activation modulates the in vivo activity of buprenorphine. Structure activity studies were conducted to design buprenorphine analogues with high affinity at each of these receptors and to characterize them in in vitro and in vivo assays. EXPERIMENTAL APPROACH: Compounds were tested for binding affinity and functional activity using [(35) S]GTPγS binding at each receptor and a whole-cell fluorescent assay at µ receptors. BU08073 was evaluated for antinociceptive agonist and antagonist activity and for its effects on anxiety in mice. KEY RESULTS: BU08073 bound with high affinity to all opioid receptors. It had virtually no efficacy at δ, κ and NOP receptors, whereas at µ receptors, BU08073 has similar efficacy as buprenorphine in both functional assays. Alone, BU08073 has anxiogenic activity and produces very little antinociception. However, BU08073 blocks morphine and U50,488-mediated antinociception. This blockade was not evident at 1 h post-treatment, but is present at 6 h and remains for up to 3-6 days. CONCLUSIONS AND IMPLICATIONS: These studies provide structural requirements for synthesis of 'universal' opioid ligands. BU08073 had high affinity for all the opioid receptors, with moderate efficacy at µ receptors and reduced efficacy at NOP receptors, a profile suggesting potential analgesic activity. However, in vivo, BU08073 had long-lasting antagonist activity, indicating that its pharmacokinetics determined both the time course of its effects and what receptor-mediated effects were observed. LINKED ARTICLES: This article is part of a themed section on Opioids: New Pathways to Functional Selectivity. To view the other articles in this section visit http://dx.doi.org/10.1111/bph.2015.172.issue-2.

Phase I clinical study to select a novel oral formulation for ibandronate containing the excipient sodium N-[8-(2-hydroxybenzoyl) amino] caprylate (SNAC).

The aim of this study was to select a novel oral formulation for ibandronate (IBN, CAS number: 13892619). In four cohorts of 28, 21, 19 and 29 healthy volunteers, the impact of the carrier molecule sodium N-[8-(2-hydroxybenzoyl) amino] caprylate (SNAC, CAS number: 203787-91-1) on the bioavailability of IBN was investigated. Within each cohort different oral formulations with one dose of ibandronate (30 mg) and three different ratios of IBN:SNAC (1:5, 1:10 and 1:20) were compared to the approved oral IBN tablet formulations (150 and 50 mg IBN) in a 4-way cross-over design and a one week washout between the administrations. The highest mean IBN exposure was achieved with a capsule formulation containing drug-coated beadlets and an IBN:SNAC ratio of 1:5. AUC(last) and C(max) of IBN were approximately 1.3- and 2.2-fold higher compared to the reference treatment (150 mg IBN without SNAC). Increasing the post-dose fasting duration from 15 to 30 min resulted in a more than 2-fold increase in AUC(last), while superimposable IBN serum concentration-time profiles were achieved after a 30 and 60 min fast. The tolerability of the IBN/SNAC treatments in all cohorts was similar to that in the IBN reference groups and most adverse events (AEs) were of mild to moderate intensity.

A comparative study of different release apparatus in generating in vitro-in vivo correlations for extended release formulations.

The importance of hydrodynamics in the development of in vitro-in vivo correlations (IVIVCs) for a BCS Class II compound housed in a hydrophilic matrix formulation and for a BCS Class I compound housed in an osmotic pump formulation was assessed. In vitro release data were collected in media simulating the fasted state conditions in the stomach, small intestine and the ascending colon using the USP II, the USP III and the USP IV release apparatuses. Using the data collected with the USP II apparatus, the plasma profiles were simulated and compared with human plasma profiles obtained after administration of the same dosage forms to healthy fasted volunteers. Data obtained with the USP III and USP IV apparatuses were directly correlated with the deconvoluted human plasma profiles. In vitro hydrodynamics affected the release profile from the hydrophilic matrix. For both formulations, based on the values of the difference factor, all three apparatuses were equally useful in predicting the actual in vivo profile on an average basis. Although some hydrodynamic variability is likely with low solubility drugs in hydrophilic matrices, the hydrodynamics of USP II, III and IV may all be adequate as a starting point for generating IVIVCs for monolithic dosage forms in the fasted state.