Patient-Reported Outcomes of Maxillomandibular Surgery for Obstructive Sleep Apnea Treatment: A Scoping Review.

(1) Background: The present scoping review aims to scrutinize all existing patient-reported outcomes and assess the perspectives of obstructive sleep apnea patients after maxillomandibular surgery. (2) Methods: The review was carried out according to the extensions for scoping reviews using the PRISMA-ScR guidelines. Several databases were used to carry out the initial search. This study included randomized controlled trials, cohort studies, cross-sectional and case-control studies. The included studies considered patients with obstructive sleep apnea who were submitted to orthognathic surgery as the main subjects, and the patient's perception of quality of life, satisfaction, treatment experience and side effects were assessed. (3) Results: From 1407 examined articles, a total of 16 were included. Most of the included studies used more than one questionnaire to assess quality of life, except for five articles. The most commonly referred instruments were the Epworth Sleepiness Scale, SF-36, the Functional Outcomes of Sleep and Ottawa Sleep Apnea. The most commonly assessed outcomes were sleep quality, daytime function, facial aesthetics, dental function and emotional health. (4) Conclusions: The number of variables that can be evaluated from a patient's perspective are endless, as are the tools available to assess them. Not all of these tools, which are generally questionnaires, assess all the various outcomes, and some do not compare the pre- and post-surgical situations. Most of them are generic and lack specificity for obstructive sleep apnea.

Surface Treatment of Dental Mini-Sized Implants and Screws: A Systematic Review with Meta-Analysis.

Miniscrews are devices that allow for absolute skeletal anchorage. However, their use has a higher failure rate (10-30%) than dental implants (10%). To overcome these flaws, chemical and/or mechanical treatment of the surface of miniscrews has been suggested. There is no consensus in the current literature about which of these methods is the gold standard; thus, our objective was to carry out a systematic review and meta-analysis of the literature on surface treatments of miniscrews. The review protocol was registered (PROSPERO CRD42023408011) and is in accordance with the PRISMA guidelines. A bibliographic search was carried out on PubMed via MEDLINE, Cochrane Library, Embase and Web of Science. The initial search of the databases yielded 1684 results, with 98 studies included in the review, with one article originating from the search in the bibliographic references of the included studies. The results of this systematic review show that the protocols of miniscrew surface treatments, such as acid-etching; sandblasting, large-grit and acid-etching; photofunctionalization with ultraviolet light; and photobiomodulation, can increase stability and the success of orthodontic treatment. The meta-analysis revealed that the treatment with the highest removal torque is SLA, followed by acid-etching. On the other hand, techniques such as oxidative anodization, anodization with pre-calcification and heat treatment, as well as deposition of chemical compounds, require further investigation to confirm their effectiveness.

Comparison of in-office and at-home bleaching techniques: An umbrella review of efficacy and post-operative sensitivity.

Objectives: The objective of this umbrella review is to evaluate the efficacy and adverse effects of different teeth whitening techniques in-office (IO) and at-home (AH), regarding chromatic changes and teeth sensitivity. Materials and methods: The search was carried out from several databases. The included studies were all systematic reviews with or without meta-analysis of RCT or quasi-RCT. The participants were patients that underwent external dental bleaching in permanent vital teeth. The interventions were in-office (IO) bleaching techniques and at-home (AT) bleaching techniques with different bleaching agents and concentrations. Results: The search resulted in a total of 257 articles, and 28 SR were included in the qualitative analysis and nine in the quantitative analysis. There is no difference between in-office and at-home techniques in terms of color change (p = 0.95) and post-treatment sensitivity (p = 0.85). There is similarity risk and intensity of teeth sensitivity between AH and IO bleaching. IO bleaching with light-activated systems with low concentrations of bleaching agent showed similar results to IO bleaching techniques with high concentrated bleaching gels. With the application of the criteria of the AMSTAR 2 tool, the reviews were considered critically low to high. Conclusions: There are no significant differences in terms of color change between the different bleaching techniques compared. Teeth sensitivity is always present regardless of the technique used. The use of light activation systems did not increase the intensity and risk of post-operative sensitivity.

Frequency of CDH1, CTNNA1 and CTNND1 Germline Variants in Families with Diffuse and Mixed Gastric Cancer.

The most well-characterized hereditary form of gastric cancer is hereditary diffuse gastric cancer (HDGC), an autosomal dominant syndrome characterized by an increased risk of diffuse gastric and lobular breast cancer. HDGC is predominantly caused by germline pathogenic variants in the CDH1 gene, and more rarely in the CTNNA1 gene. Furthermore, the International Gastric Cancer Linkage Consortium (IGCLC) guidelines do not clarify whether or not mixed gastric cancer (with a diffuse component) should be considered in the HDGC genetic testing criteria. We aimed to evaluate the contribution of CTNNA1 and CTNND1 germline variants to HDGC. Additionally, we also intended to compare the frequencies of CDH1 and CTNNA1 (and eventually CTNND1) germline variants between patients with diffuse and mixed gastric carcinomas to evaluate if genetic testing for these genes should or should not be considered in patients with the latter. We analyzed the CDH1 gene in 67 cases affected with early-onset/familial mixed gastric carcinomas and the CTNNA1 and CTNND1 genes in 208 cases with diffuse or mixed gastric cancer who had tested negative for CDH1 pathogenic germline variants. A deleterious CTNNA1 germline variant was found in 0.7% (1/141) of diffuse gastric cancer patients meeting the 2020 IGCLC criteria, as compared to the rate of 2.8% of CDH1 deleterious variants found by us in this setting. No deleterious variants were found in CTNND1, but six variants of uncertain significance were identified in this gene. We did not find any pathogenic CDH1, CTNNA1 or CTNND1 variant in index patients with early-onset/familial mixed gastric cancer, so there is no evidence that supports including this tumor type in the testing criteria for germline variants in these genes. The role of the CTNND1 gene in inherited gastric cancer predisposition is still unclear.

NSCLC presents metabolic heterogeneity, and there is still some leeway for EGF stimuli in EGFR-mutated NSCLC.

BACKGROUND: Metabolic remodeling is crucial in carcinogenesis and cancer progression. Oncogenic mutations may promote metabolic reprogramming in cancer cells to support their energy and biomass requirements. EGFR mutations are commonly found in non-small cell lung cancer (NSCLC) and may induce NSCLC metabolic rewiring. Whether EGFR-driven metabolic reprogramming triggers cell vulnerabilities with therapeutic potential remains unknown. METHODS: The role of EGFR signaling activation by EGF was investigated using NSCLC cell lines with different EGFR and KRAS status: A549 (EGFR WT and KRAS c.34G > A), H292 (EGFR WT and KRAS WT) and PC-9 (EGFR exon 19 E746-A750 deletion and KRAS WT). The effect of EGF on NSCLC cell death and cell cycle was evaluated using flow cytometry, and cell migration was assessed through wound healing. EGFR, HER2, MCT1, and MCT4 expression was analyzed through immunofluorescence or western blotting. We explored the impact of glucose and lactate bioavailability on NSCLC cells' metabolic profile using nuclear magnetic resonance (NMR) spectroscopy. Moreover, the expression of several relevant metabolic genes in NSCLC cells or patient samples was determined by RT-qPCR. RESULTS: We showed that cell lines presented different metabolic profiles, and PC-9 cells were the most responsive to EGF stimulus, as they showed higher rates of cell proliferation and migration, together with altered metabolic behavior. By inhibiting EGFR with gefitinib, a decrease in glucose consumption was observed, which may be related to the fact that despite PC-9 harbor EGFR mutation, they still express the EGFR WT allele. The analysis of NSCLC patients' RNA showed a correlation between MCT1/MCT4 and GLUT1 expression in most cases, indicating that the metabolic information can serve as a reference in patients' follow-up. CONCLUSION: Together, this study shows that NSCLC cell lines have heterogeneous metabolic profiles, which may be underlaid by different genetic profiles, revealing an opportunity to identify and stratify patients who can benefit from metabolism-targeted therapies.

Bulk-Fill Resins versus Conventional Resins: An Umbrella Review.

Currently, composite resins have become the material of choice for the restoration of posterior teeth. Although bulk-fill resins represent a tempting alternative due to their lower complexity and faster use, some dentists are reluctant to use this material. The objective is to compare the performance of bulk-fill resins and conventional resins in direct restorations of posterior teeth based on the literature. The databases that were used to carry out the research were PubMed/MEDLINE, Embase, the Cochrane Library and the WOS. This umbrella literature review complies with PRISMA standards and assesses the quality of studies using the AMSTAR 2 tool. With the application of the criteria of the AMSTAR 2 tool, the reviews were considered low to moderate. The overall meta-analysis, although without statistical significance, favours mostly the use of conventional resin, as it is about five times more likely to obtain a favourable result than bulk-fill resin. Bulk-fill resins result in a simplification of the clinical process of posterior direct restorations, which is an advantage. The performance in terms of several properties of bulk-fill resins and conventional resins showed that they present similar behaviour.

Predictive Biomarkers for Checkpoint Inhibitor Immune-Related Adverse Events.

Immune-checkpoint inhibitors (ICIs) are antagonists of inhibitory receptors in the immune system, such as the cytotoxic T-lymphocyte-associated antigen-4, the programmed cell death protein-1 and its ligand PD-L1, and they are increasingly used in cancer treatment. By blocking certain suppressive pathways, ICIs promote T-cell activation and antitumor activity but may induce so-called immune-related adverse events (irAEs), which mimic traditional autoimmune disorders. With the approval of more ICIs, irAE prediction has become a key factor in improving patient survival and quality of life. Several biomarkers have been described as potential irAE predictors, some of them are already available for clinical use and others are under development; examples include circulating blood cell counts and ratios, T-cell expansion and diversification, cytokines, autoantibodies and autoantigens, serum and other biological fluid proteins, human leucocyte antigen genotypes, genetic variations and gene profiles, microRNAs, and the gastrointestinal microbiome. Nevertheless, it is difficult to generalize the application of irAE biomarkers based on the current evidence because most studies have been retrospective, time-limited and restricted to a specific type of cancer, irAE or ICI. Long-term prospective cohorts and real-life studies are needed to assess the predictive capacity of different potential irAE biomarkers, regardless of the ICI type, organ involved or cancer site.

Three-Dimensional Impression of Biomaterials for Alveolar Graft: Scoping Review.

Craniofacial bone defects are one of the biggest clinical challenges in regenerative medicine, with secondary autologous bone grafting being the gold-standard technique. The development of new three-dimensional matrices intends to overcome the disadvantages of the gold-standard method. The aim of this paper is to put forth an in-depth review regarding the clinical efficiency of available 3D printed biomaterials for the correction of alveolar bone defects. A survey was carried out using the following databases: PubMed via Medline, Cochrane Library, Scopus, Web of Science, EMBASE, and gray literature. The inclusion criteria applied were the following: in vitro, in vivo, ex vivo, and clinical studies; and studies that assessed bone regeneration resorting to 3D printed biomaterials. The risk of bias of the in vitro and in vivo studies was performed using the guidelines for the reporting of pre-clinical studies on dental materials by Faggion Jr and the SYRCLE risk of bias tool, respectively. In total, 92 publications were included in the final sample. The most reported three-dimensional biomaterials were the PCL matrix, ß-TCP matrix, and hydroxyapatite matrix. These biomaterials can be combined with different polymers and bioactive molecules such as rBMP-2. Most of the included studies had a high risk of bias. Despite the advances in the research on new three-dimensionally printed biomaterials in bone regeneration, the existing results are not sufficient to justify the application of these biomaterials in routine clinical practice.

H2S-Synthesizing Enzymes Are Putative Determinants in Lung Cancer Management toward Personalized Medicine.

Lung cancer is a lethal disease with no truly efficient therapeutic management despite the progresses, and metabolic profiling can be a way of stratifying patients who may benefit from new therapies. The present study is dedicated to profiling cysteine metabolic pathways in NSCLC cell lines and tumor samples. This was carried out by analyzing hydrogen sulfide (H2S) and ATP levels, examining mRNA and protein expression patterns of cysteine catabolic enzymes and transporters, and conducting metabolomics analysis using nuclear magnetic resonance (NMR) spectroscopy. Selenium-chrysin (SeChry) was tested as a therapeutic alternative with the aim of having an effect on cysteine catabolism and showed promising results. NSCLC cell lines presented different cysteine metabolic patterns, with A549 and H292 presenting a higher reliance on cystathionine ß-synthase (CBS) and cystathionine γ-lyase (CSE) to maintain H2S levels, while the PC-9 cell line presented an adaptive behavior based on the use of mercaptopyruvate sulfurtransferase (MST) and cysteine dioxygenase (CDO1), both contributing to the role of cysteine as a pyruvate source. The analyses of human lung tumor samples corroborated this variability in profiles, meaning that the expression of certain genes may be informative in defining prognosis and new targets. Heterogeneity points out individual profiles, and the identification of new targets among metabolic players is a step forward in cancer management toward personalized medicine.

Current Treatment of Cleft Patients in Europe from a Provider Perspective: A Cross-Sectional Survey.

The latest Eurocleft study reported several discrepancies in cleft care. Since then, no critical assessment has been performed. This study aimed to better understand the main strengths and inefficiencies of cleft care within Europe. The Google documents platform was used to create an online survey to investigate several aspects, i.e., provider characteristics, patient profile, services offered, and treatment protocols and complications. Descriptive statistics were calculated. The association between categorical variables was performed using Fisher's exact test. The significance level chosen was 0.05. A total of 69 individuals from 23 European countries completed the survey. Centralized care was the preferred system, and the majority of the countries have an association for cleft patients and professionals (53.6%). The largest percentage of patients was seen in the university hospital environment (Fisher's exact test p < 0.001). The majority of responders (98.6%) reported that an orthodontist was involved in cleft treatment, and 56.5% of them spend 76-100% of their time treating these patients. Despite cleft care having been reconfigured in Europe, a better consensus among the various centers regarding provider characteristics, services offered, and treatment protocols is still required. There is a need for better coordination between clinicians and national/international regulatory bodies.

Velopharyngeal Insufficiency Treatment in Cleft Palate Patients: Umbrella Review.

Velopharyngeal insufficiency may occur as a result of an anatomical or structural defect and may be present in patients with cleft lip and palate. The treatment options presented in the literature are varied, covering invasive and non-invasive methods. However, although these approaches have been employed and their outcomes reviewed, no conclusions have been made about which approach is the gold-standard. This umbrella review aimed to synthesize the current literature regarding velopharyngeal insufficiency treatments in cleft lip and palate patients, evaluating their effectiveness based on systematic reviews. A standardized search was carried out in several electronic databases, namely PubMed via Medline, Web of Science, Cochrane Library, and Embase. The quality of the included studies was evaluated using AMSTAR2 and degree of overlap was analyzed using Corrected Covered Area. Thirteen articles were included in the qualitative review, with only 1 in the non-invasive method category, and 12 in the invasive method category. All reviewed articles were judged to be of low quality. In symptomatic patients, treatment did not solely comprise speech therapy, as surgical intervention was often necessary. Although there was no surgical technique considered to be the gold standard for the correction of velopharyngeal insufficiency, the Furlow Z-plasty technique and minimal incision palatopharyngoplasty were the best among reported techniques.

Reconstruction of Oronasal Fistula with Tongue Flap: A Cleft Palate Report.

Oronasal fistula can persist after conventional secondary alveolar bone graft surgery, which may lead to functional issues, such as regurgitation of fluids from the oral to the nasal cavity. This manuscript describes a clinical case of a patient with a bilateral cleft lip and palate that underwent tongue graft surgery for closure of an oronasal fistula after three failed local mucosa flap surgeries. The multidisciplinary treatment was comprised of orthodontic treatment, mucosa and alveolar grafts for palate closure and aesthetic rehabilitation of the anterior maxillary teeth. Smile aesthetics were noticeably improved, enhancing the patient's self-perception and confidence.

Cleft Orthodontic Care in Europe: A Cross-Sectional Survey.

(1) Background: Orthodontists have an important role in cleft care. Over the two decades since the Eurocleft studies, a significant improvement in healthcare systems has been achieved but there has been no critical assessment regarding the establishment of proposed standard protocols. This study aimed to describe the current provider characteristics, orthodontic appliances, services offered, orthodontic complications, and cost analysis of cleft treatment in Europe. (2) Methods: A cross-sectional 22-question online survey, accessible from January 2021 to July 2021, was sent to 214 practitioners, pertaining to provider characteristics, orthodontic appliances, services offered, orthodontic complications, and cost analysis. Descriptive statistics were calculated for each question. Fisher's exact test was used to assess the association between categorical variables. (3) Results: A total of 79 responses from 23 European countries completed the survey (response rate = 37%), with 69 surveys being assessed after the exclusion of incomplete surveys. Rapid maxillary expansion was the preferred expansion protocol (45%). Distraction osteogenesis was the most reported alternative treatment to secondary bone grafts (19%), with private practitioners being less likely to perform these treatments (Fisher's exact test, p = 0.001). Orthodontic services offered were, however, rather similar in the various locations of provision (hospital and/or university, private). Compromised oral hygiene (77%) was the most reported orthodontic complication. The National Health Services support the majority of cleft orthodontic care (67%) in Europe. (4) Conclusion: An apparent improvement in orthodontic healthcare provision has been achieved within Europe in the last two decades, but there are several discrepancies, namely regarding treatment timing and the appliances offered.

Routine Immunohistochemical Analysis of Mismatch Repair Proteins in Colorectal Cancer-A Prospective Analysis.

Recognition of a hereditary colorectal cancer (CRC) syndrome is crucial and Lynch Syndrome (LS) is the most frequent immunohistochemistry (IHC)-screening for mismatch repair proteins (MMR) deficiency in CRC is therefore advocated. An unicentric cohort study was conducted in a central Oncological Hospital to assess its results. All patients under 70 years-old admitted between July 2017-June 2019 and submitted to surgery for CRC were included. Of 275 patients, 56.0% were male, median age 61.0 (IQR:54.5-65.0), with synchronous tumors in six. Histology revealed high grade adenocarcinoma in 8.4%; mucinous and/or signet ring differentiation in 11.3%; and lymphocytic infiltration in 29.8%. Amsterdam (AC) and Bethesda (BC) Criteria were fulfilled in 11 and 74 patients, respectively. IHC revealed loss of expression of MMR proteins in 24 (8.7%), mostly MLH1 and PMS2 (n = 15) and PMS2 (n = 4). Among these, no patients fulfilled AC and 13 fulfilled BC. BRAF mutation or MLH1 promoter hypermethylation was found in four patients with MLH1 loss of expression. Genetic diagnosis was performed in 51 patients, 11 of them with altered IHC. LS was diagnosed in four, and BC was present in three. One patient would not have been diagnosed without routine IHC screening. These results strengthen the important role of IHC screening for MMR proteins loss of expression in CRC.

Condylar Changes after Maxillary Expansion in Children with Cleft Lip and Palate-A Three-Dimensional Retrospective Study.

BACKGROUND: The presence of posterior crossbite can trigger aesthetic and functional changes as mandibular asymmetry in individuals, contributing to asymmetrical muscle function. Mandibular asymmetry and respective condyle adaptation may be an etiological factor in temporomandibular disorder. This study aims to evaluate the effects of maxillary expansion on the position and angulation of the condyles as well as the intercondylar distance in children with cleft lip and palate. METHODS: Twenty-five individuals with cleft lip and palate who underwent maxillary expansion were selected. Condylar changes were evaluated by cone beam computed tomography using the Pullinger and Hollender formula. To determine the statistically significant differences between the variables, the Student t-test and the Benjamini-Hochberg correction method for multiple comparisons were used. RESULTS: No statistically significant differences between angulation and condylar position before and after maxillary expansion were found. The intercondylar distance tended to increase in growing individuals with cleft lip and palate after maxillary expansion. CONCLUSIONS: Intercondylar distance shows a tendency to increase after expansion regardless of the cleft phenotype. No differences were found in angulation and condylar position with the changes in occlusion resulting from maxillary expansion.

Pharyngeal Airspace Alterations after Using the Mandibular Advancement Device in the Treatment of Obstructive Sleep Apnea Syndrome.

BACKGROUND: Mandibular Advancement Devices (MADs), inserted in non-surgical treatments for obstructive sleep apnea and hypopnea syndrome (OSAHS), are used intra-orally during the sleep period, with the aim of promoting mandibular protrusion. The aim of the study is to analyze the changes in the upper airway after the use of an MAD in the treatment of OSAHS. METHODS: 60 patients diagnosed with OSAHS, as established by the Sleep Medicine Service, underwent treatment with the Silensor SL device at the Stomatology Service of the University Hospital Center of Coimbra, from January 2018 to January 2019. All patients completed two polysomnographies and two lateral teleradiographies: one before starting treatment (T0) and one after 1 year of treatment (T1). In the lateral teleradiography performed after one year of treatment, the patient had the MAD placed intra-orally. The linear measurements of the airspace proposed by the Arnett/Gunson FAB Surgery cephalometric analysis were measured at four craniometric points: A, MCI, B, Pog. RESULTS: The results demonstrate an anteroposterior airway enlargement in two of the four points studied with the MAD placed intra-orally (B and Pog point). The greatest average increase is observed at point Pog (3 mm), followed by B (1 mm), and finally, point A (0.6 mm). CONCLUSIONS: This study proved that there is an improvement in anteroposterior measurements at various points in the upper airways after treatment with MAD.

Prediction of Immune-Related Adverse Events Induced by Immune Checkpoint Inhibitors With a Panel of Autoantibodies: Protocol of a Multicenter, Prospective, Observational Cohort Study.

Introduction: Immune checkpoint inhibitor (ICI) therapy is markedly improving the prognosis of patients with several types of cancer. On the other hand, the growth in the use of these drugs in oncology is associated with an increase in multiple immune-related adverse events (irAEs), whose optimal prevention and management remain unclear. In this context, there is a need for reliable and validated biomarkers to predict the occurrence of irAEs in patients treated with ICIs. Thus, the main objective of this study is to evaluate the diagnostic performance of a sensitive routinely available panel of autoantibodies consisting of antinuclear antibodies, rheumatoid factor, and antineutrophil cytoplasmic antibodies to identify patients at risk of developing irAEs. Methods and Analysis: A multicenter, prospective, observational, cohort study has been designed to be conducted in patients diagnosed with cancer amenable to ICI therapy. Considering the percentage of ICI-induced irAEs to be 25% and a loss to follow-up of 5%, it has been estimated that a sample size of 294 patients is required to detect an expected sensitivity of the autoantibody panel under study of 0.90 with a confidence interval (95%) of no less than 0.75. For 48 weeks, patients will be monitored through the oncology outpatient clinics of five hospitals in Spain. Immune-related adverse events will be defined and categorized according to CTCAE v. 5.0. All the patients will undergo ordinary blood tests at specific moments predefined per protocol and extraordinary blood tests at the time of any irAE being detected. Ordinary and extraordinary samples will be frozen and stored in the biobank until analysis in the same autoimmunity laboratory when the whole cohort reaches week 48. A predictive model of irAEs will be constructed with potential risk factors of immune-related toxicity including the autoantibody panel under study. Ethics and Dissemination: This protocol was reviewed and approved by the Ethical Committee of the Basque Country and the Spanish Agency of Medicines and Medical Devices. Informed consent will be obtained from all participants before their enrollment. The authors declare that the results will be submitted to an international peer-reviewed journal for their prompt dissemination.

Application of Three-Dimensional Digital Technology in Orthodontics: The State of the Art.

Three-dimensional technologies are one of the most recent and relevant advancements in the field of Dentistry. These systems, including intraoral scans, 3D imaging exams (CAT scan, CBCT and MRI), CAD/CAM 3D printing devices and 3D computer software, have enabled clinicians to greatly improve patient care along with reducing treatment planning time. The present descriptive study aims to explore possible applications of 3D technologies during the diagnosis, treatment plan, case monitoring and result assessment in orthodontics. The overall upgrade provided by these technologies can improve the clinicians' workflow and effectiveness by simplifying conventional techniques considered to be especially arduous.

The Biological Effects of 3D Resins Used in Orthodontics: A Systematic Review.

Three-dimensional (3D) resin medical-dental devices have been increasingly used in recent years after the emergence of digital technologies. In Orthodontics, therapies with aligners have gained popularity, mainly due to the aggressive promotion policies developed by the industry. However, their systemic effects are largely unknown, with few studies evaluating the systemic toxicity of these materials. The release of bisphenol A and other residual monomers have cytotoxic, genotoxic, and estrogenic effects. This systematic review aims to analyze the release of toxic substances from 3D resins used in Orthodontics and their toxic systemic effects systematically. The PICO question asked was, "Does the use of 3D resins in orthodontic devices induce cytotoxic effects or changes in estrogen levels?". The search was carried out in several databases and according to PRISMA guidelines. In vitro, in vivo, and clinical studies were included. The in vitro studies' risk of bias was assessed using the guidelines for the reporting of pre-clinical studies on dental materials by Faggion Jr. For the in vivo studies, the SYRCLE risk of bias tool was used, and for the clinical studies, the Cochrane tool. A total of 400 articles retrieved from the databases were initially scrutinized. Fourteen articles were included for qualitative analysis. The risk of bias was considered medium to high. Cytotoxic effects or estrogen levels cannot be confirmed based on the limited preliminary evidence given by in vitro studies. Evidence of the release of bisphenol A and other monomers from 3D resin devices, either in vitro or clinical studies, remains ambiguous. The few robust results in the current literature demonstrate the absolute need for further studies, especially given the possible implications for the young patient's fertility, which constitutes one of the largest groups of patients using these orthodontic devices.

What Is the Most Effective Technique for Bonding Brackets on Ceramic-A Systematic Review and Meta-Analysis.

Background: There has been an increase in demand for orthodontic treatment within the adult population, who likely receive restorative treatments using ceramic structures. The current state of the art regarding the most effective method to achieve an appropriate bond strength of brackets on ceramic surfaces isn't consensual. This systematic review aims to compare the available surface treatments to ceramics and determine the one that allows to obtain the best bond strength. Methods: This systematic review followed the PRISMA guidelines and the PICO methodology was used, with the question "What is the most effective technique for bonding brackets on ceramic crowns or veneers?". The research was carried out in PubMed, Web of Science, Embase and Cochrane Library databases. In vitro and ex vivo studies were included. The methodological quality was evaluated using the guidelines for reporting of preclinical studies on dental materials by Faggion Jr. Results: A total of 655 articles searched in various databases were initially scrutinized. Sevety one articles were chosen for quality analysis. The risk of bias was considered medium to high in most studies. The use of hydrofluoric acid (HF), silane and laser afforded the overall best results. HF and HF plus laser achieved significantly highest bond strength scores in felsdphatic porcelain, while laser was the best treatment in lithium disilicate ceramics. Conclusions: The most effective technique for bonding brackets on ceramic is dependent on the type of ceramic.