Quantifying the effects of anesthesia on intracellular oxygen via low-cost portable microscopy using dual-emissive nanoparticles.

Intracellular oxygenation is an important parameter for numerous biological studies. While there are a variety of methods available for acquiring in vivo measurements of oxygenation in animal models, most are dependent on indirect oxygen measurements, restraints, or anesthetization. A portable microscope system using a Raspberry Pi computer and Pi Camera was developed for attaching to murine dorsal window chambers. Dual-emissive boron nanoparticles were used as an oxygen-sensing probe while mice were imaged in awake and anesthetized states. The portable microscope system avoids altered in vivo measurements due to anesthesia or restraints while enabling increased continual acquisition durations.

Nitric oxide stimulates type IV MSHA pilus retraction in Vibrio cholerae via activation of the phosphodiesterase CdpA.

Bacteria use surface appendages called type IV pili to perform diverse activities including DNA uptake, twitching motility, and attachment to surfaces. The dynamic extension and retraction of pili are often required for these activities, but the stimuli that regulate these dynamics remain poorly characterized. To address this question, we study the bacterial pathogen Vibrio cholerae, which uses mannose-sensitive hemagglutinin (MSHA) pili to attach to surfaces in aquatic environments as the first step in biofilm formation. Here, we use a combination of genetic and cell biological approaches to describe a regulatory pathway that allows V. cholerae to rapidly abort biofilm formation. Specifically, we show that V. cholerae cells retract MSHA pili and detach from a surface in a diffusion-limited, enclosed environment. This response is dependent on the phosphodiesterase CdpA, which decreases intracellular levels of cyclic-di-GMP to induce MSHA pilus retraction. CdpA contains a putative nitric oxide (NO)-sensing NosP domain, and we demonstrate that NO is necessary and sufficient to stimulate CdpA-dependent detachment. Thus, we hypothesize that the endogenous production of NO (or an NO-like molecule) in V. cholerae stimulates the retraction of MSHA pili. These results extend our understanding of how environmental cues can be integrated into the complex regulatory pathways that control pilus dynamic activity and attachment in bacterial species.

Difluoroboron ß-diketonate polylactic acid oxygen nanosensors for intracellular neuronal imaging.

Critical for metabolism, oxygen plays an essential role in maintaining the structure and function of neurons. Oxygen sensing is important in common neurological disorders such as strokes, seizures, or neonatal hypoxic-ischemic injuries, which result from an imbalance between metabolic demand and oxygen supply. Phosphorescence quenching by oxygen provides a non-invasive optical method to measure oxygen levels within cells and tissues. Difluoroboron ß-diketonates are a family of luminophores with high quantum yields and tunable fluorescence and phosphorescence when embedded in certain rigid matrices such as poly (lactic acid) (PLA). Boron nanoparticles (BNPs) can be fabricated from dye-PLA materials for oxygen mapping in a variety of biological milieu. These dual-emissive nanoparticles have oxygen-insensitive fluorescence, oxygen-sensitive phosphorescence, and rigid matrix all in one, enabling real-time ratiometric oxygen sensing at micron-level spatial and millisecond-level temporal resolution. In this study, BNPs are applied in mouse brain slices to investigate oxygen distributions and neuronal activity. The optical properties and physical stability of BNPs in a biologically relevant buffer were stable. Primary neuronal cultures were labeled by BNPs and the mitochondria membrane probe MitoTracker Red FM. BNPs were taken up by neuronal cell bodies, at dendrites, and at synapses, and the localization of BNPs was consistent with that of MitoTracker Red FM. The brain slices were stained with the BNPs, and the BNPs did not significantly affect the electrophysiological properties of neurons. Oxygen maps were generated in living brain slices where oxygen is found to be mostly consumed by mitochondria near synapses. Finally, the BNPs exhibited excellent response when the conditions varied from normoxic to hypoxic and when the neuronal activity was increased by increasing K+ concentration. This work demonstrates the capability of BNPs as a non-invasive tool in oxygen sensing and could provide fundamental insight into neuronal mechanisms and excitability research.

Multi-Stimuli Responsive Luminescent ß-Diketones and Difluoroboron Complexes with Heterocyclic Substituents.

Emissive ß-diketones (bdks) and difluoroboron complexes (BF2bdks) exhibit multi-stimuli responsive luminescence, including solvatochromism, viscochromism, aggregation induced emission, thermal and mechanochromic luminescence, halochromism and pH sensing. In this study, a series of six-membered heterocycle-substituted (piperidine, morpholine, 1-methyl piperazine) bdk ligands and boron complexes were synthesized, and their luminescent properties were investigated. All the compounds exhibited red-shifted emission in more polar solvents due to intramolecular charge transfer as well as higher emission intensity in more viscous environments. In response to solubility changes in water/tetrahydrofuran mixtures, while the piperazine bdk ligand showed aggregation caused quenching, the piperidine and morpholine bdks displayed enhanced emission upon aggregation. In the solid state, all ligands exhibited mechanochromism. More dramatic halochromism was observed for the piperidine boron dye spin cast film. In solution, for the boron dyes under varying pH values (1-13), different protonated and deprotonated forms were analyzed according to the measured emission spectra. Graphical abstract Multi-stimuli responsive luminescent properties were investigated for the six-membered heterocycle-substituted ß-diketone ligands and difluoroboron complexes.

Dual-emissive, oxygen-sensing boron nanoparticles quantify oxygen consumption rate in breast cancer cells.

SIGNIFICANCE: Decreasing the oxygen consumption rate (OCR) of tumor cells is a powerful method for ameliorating tumor hypoxia. However, quantifying the change in OCR is challenging in complex experimental systems. AIM: We present a method for quantifying the OCR of two tumor cell lines using oxygen-sensitive dual-emissive boron nanoparticles (BNPs). We hypothesize that our BNP results are equivalent to the standard Seahorse assay. APPROACH: We quantified the spectral emissions of the BNP and accounted for external oxygen diffusion to quantify OCR over 24 h. The BNP-computed OCR of two breast cancer cell lines, E0771 and 4T07, were compared with their respective Seahorse assays. Both cell lines were also irradiated to quantify radiation-induced changes in the OCR. RESULTS: Using a Bland-Altman analysis, our BNPs OCR was equivalent to the standard Seahorse assay. Moreover, in an additional experiment in which we irradiated the cells at their 50% survival fraction, the BNPs were sensitive enough to quantify 24% reduction in OCR after irradiation. CONCLUSIONS: Our results conclude that the BNPs are a viable alternative to the Seahorse assay for quantifying the OCR in cells. The Bland-Altman analysis showed that these two methods result in equivalent OCR measurements. Future studies will extend the OCR measurements to complex systems including 3D cultures and in vivo models, in which OCR measurements cannot currently be made.

Oxygen-Sensing Biomaterial Construct for Clinical Monitoring of Wound Healing.

OBJECTIVE: Oxygen is essential to wound healing; therefore, accurate monitoring can guide clinical decisions. Clinical wound assessment is often subjective, and tools to monitor wound oxygen are typically expensive, indirect, and highly variable. This study demonstrates the utility of a novel, low-cost oxygen-sensing thin film for serial assessment of wound oxygenation. DESIGN: Dual-layer films were fabricated with boron oxygen-sensing nanoparticles (BNPs) impregnated into a chitosan-polycaprolactone layer for direct wound bed contact with a relatively oxygen impermeable calcium alginate surface layer. The BNPs are a dual-emissive difluoroboron ß-diketonate dye incorporated into poly(lactic acid) nanoparticles. Under UV excitation, the BNPs emit fluorescence based on concentration and oxygen-sensitive phosphorescence. The fluorescence/phosphorescence ratio is directly proportional to oxygen concentration. METHODS: A series of in vitro oxygen challenges and in vivo murine and porcine wound healing models were used to validate the utility of the film in sensing wound oxygenation. MAIN RESULTS: In vitro testing demonstrated the oxygen-sensing capability of the BNP film and its ability to shield ambient oxygen to isolate wound oxygen. In vivo testing demonstrated the ability of the film to accurately monitor relative oxygen changes in a murine wound over time, measuring a 22% fluorescence/phosphorescence increase during acute healing. CONCLUSIONS: This study presents a low-cost, noninvasive, direct, and serial oxygen mapping technology to detect spatial differences in wound oxygenation. Clinical use of the films has the potential to monitor wound healing trajectories and guide wound care decisions.

Biosurfactant-Mediated Membrane Depolarization Maintains Viability during Oxygen Depletion in Bacillus subtilis.

The presence or absence of oxygen in the environment is a strong effector of cellular metabolism and physiology. Like many eukaryotes and some bacteria, Bacillus subtilis primarily utilizes oxygen during respiration to generate ATP. Despite the importance of oxygen for B. subtilis survival, we know little about how populations adapt to shifts in oxygen availability. Here, we find that when oxygen was depleted from stationary phase B. subtilis cultures, ∼90% of cells died while the remaining cells maintained colony-forming ability. We discover that production of the antimicrobial surfactin confers two oxygen-related fitness benefits: it increases aerobic growth yield by increasing oxygen diffusion, and it maintains viability during oxygen depletion by depolarizing the membrane. Strains unable to produce surfactin exhibited an ∼50-fold reduction in viability after oxygen depletion. Surfactin treatment of these cells led to membrane depolarization and reduced ATP production. Chemical and genetic perturbations that alter oxygen consumption or redox state support a model in which surfactin-mediated membrane depolarization maintains viability through slower oxygen consumption and/or a shift to a more reduced metabolic profile. These findings highlight the importance of membrane potential in regulating cell physiology and growth, and demonstrate that antimicrobials that depolarize cell membranes can benefit cells when the terminal electron acceptor in respiration is limiting. This foundational knowledge has deep implications for environmental microbiology, clinical anti-bacterial therapy, and industrial biotechnology.

Labelling primary immune cells using bright blue fluorescent nanoparticles.

Tracking cell movements is an important aspect of many biological studies. Reagents for cell tracking must not alter the biological state of the cell and must be bright enough to be visualized above background autofluorescence, a particular concern when imaging in tissue. Currently there are few reagents compatible with standard UV excitation filter sets (e.g. DAPI) that fulfill those requirements, despite the development of many dyes optimized for violet excitation (405 nm). A family of boron-based fluorescent dyes, difluoroboron ß-diketonates, has previously served as bio-imaging reagents with UV excitation, offering high quantum yields and wide excitation peaks. In this study, we investigated the use of one such dye as a potential cell tracking reagent. A library of difluoroboron dibenzoylmethane (BF2dbm) conjugates were synthesized with biocompatible polymers including: poly(l-lactic acid) (PLLA), poly(ε-caprolactone) (PCL), and block copolymers with poly(ethylene glycol) (PEG). Dye-polymer conjugates were fabricated into nanoparticles, which were stable for a week at 37 °C in water and cell culture media, but quickly aggregated in saline. Nanoparticles were used to label primary splenocytes; phagocytic cell types were more effectively labelled. Labelling with nanoparticles did not affect cellular viability, nor basic immune responses. Labelled cells were more easily distinguished when imaged on a live tissue background than those labelled with a commercially available UV-excitable cytoplasmic labelling reagent. The high efficiency in terms of both fluorescence and cellular labelling may allow these nanoparticles to act as a short-term cell labelling strategy while wide excitation peaks offer utility across imaging and analysis platforms.

Ring Size Effects on Multi-Stimuli Responsive Luminescent Properties of Cyclic Amine Substituted ß-Diketones and Difluoroboron Complexes.

Emissive ß-diketones (bdks) and difluoroboron complexes (BF2 bdks) show multi-stimuli responsive luminescence in both solution and the solid state. A series of bdk ligands and boron coordinated dyes were synthesized with different cyclic amine substituents in the 4-position to explore ring size effects on various luminescent properties, including solvatochromism, viscochromism, aggregation-induced emission (AIE), mechanochromic luminescence (ML) and halochromism. Red-shifted absorption and emission were observed in CH2 Cl2 for both bdk ligands and boron dyes with increasing substituent ring size. The compounds displayed bathochromic emission in more polar solvents, and higher fluorescence intensity in more viscous media. The AIE compounds exhibited enhanced emission when aggregated. For solid-state properties, a large emission wavelength shift was shown for the piperidine substituted bdk after melt quenching on weighing paper. Large blue-shifted emissions were observed in all the boron dye spin cast films after trifluoroacetic acid vapor annealing, and the original emissions were partially recovered after triethylamine vapor treatment.

Modified VEGF-A mRNA induces sustained multifaceted microvascular response and accelerates diabetic wound healing.

Capable of mediating efficient transfection and protein production without eliciting innate immune responses, chemically modified mRNA holds great potential to produce paracrine factors at a physiologically beneficial level, in a spatiotemporally controlled manner, and with low toxicity. Although highly promising in cardiovascular medicine and wound healing, effects of this emerging therapeutic on the microvasculature and its bioactivity in disease settings remain poorly understood. Here, we longitudinally and comprehensively characterize microvascular responses to AZD8601, a modified mRNA encoding vascular endothelial growth factor A (VEGF-A), in vivo. Using multi-parametric photoacoustic microscopy, we show that intradermal injection of AZD8601 formulated in a biocompatible vehicle results in pronounced, sustained and dose-dependent vasodilation, blood flow upregulation, and neovessel formation, in striking contrast to those induced by recombinant human VEGF-A protein, a non-translatable variant of AZD8601, and citrate/saline vehicle. Moreover, we evaluate the bioactivity of AZD8601 in a mouse model of diabetic wound healing in vivo. Using a boron nanoparticle-based tissue oxygen sensor, we show that sequential dosing of AZD8601 improves vascularization and tissue oxygenation of the wound bed, leading to accelerated re-epithelialization during the early phase of diabetic wound healing.

Phosphorescence Tuning through Heavy Atom Placement in Unsymmetrical Difluoroboron ß-Diketonate Materials.

Difluoroboron ß-diketonates (BF2 bdks) show both fluorescence (F) and room-temperature phosphorescence (RTP) when confined to a rigid matrix, such as poly(lactic acid). These materials have been utilized as optical oxygen sensors (e.g., in tumors, wounds, and cells). Spectral features include charge transfer (CT) from the major aromatic donor to the dioxaborine acceptor. A series of naphthyl-phenyl dyes (BF2 nbm) (1-6) were prepared to test heavy-atom placement effects. The BF2 nbm dye (1) was substituted with Br on naphthyl (2), phenyl (3), or both rings (4) to tailor the fluorescence/phosphorescence ratio and RTP lifetime-important features for designing O2 sensing dyes by means of the heavy atom effect. Computational studies identify the naphthyl ring as the major donor. Thus, Br substitution on the naphthyl ring produced greater effects on the optical properties, such as increased RTP intensity and decreased RTP lifetime compared to phenyl substitution. However, for electron-donating piperidyl-phenyl dyes (5), the phenyl aromatic is the major donor. As a result, Br substitution on the naphthyl ring (6) did not alter the optical properties significantly. Experimental data and computational modeling show the importance of Br position. The S1 and T1 states are described by two singly occupied MOs (SOMOs). When both of these SOMOs have substantial amplitude on the heavy atom, passage from S1 to T1 and emission from T1 to S0 are both favored. This shortens the excited-state lifetimes and enhances phosphorescence.

Meta-Alkoxy-Substituted Difluoroboron Dibenzoylmethane Complexes as Environment-Sensitive Materials.

The optical properties of meta-alkoxy-substituted difluoroboron dibenzoylmethane dyes were investigated in solution and in the solid state. Meta-alkoxy substitution induced strong intramolecular charge transfer (ICT) from the oxygen-donating substituent to the halide and boron acceptors in the excited state, as compared to the π-π* transition that is observed with para-alkoxy substitution. The optical properties of para- and meta-substituted alkoxy boron dyes were evaluated by calculations, in dilute solution, and in solid-state films. When embedded in amorphous matrixes (e.g., PLA, PMMA, PS, cholesterol), all dyes showed fluorescence (F) and phosphorescence (P) emission. In this report, we show that meta-substitution resulted in enhanced solvatochromism and an increased phosphorescence-to-fluorescence ratio in solid-state films compared to analogous para-substituted samples. With enhanced phosphorescence intensity via the heavy-atom effect, iodo-substituted dyes were further studied in PLA-PEG nanoparticles. Oxygen calibrations revealed stronger phosphorescence and a greater oxygen-sensing range for the meta- versus para-alkoxy-substituted dyes, features that are important for oxygen-sensing materials design.

Camera Method for Monitoring a Mechanochromic Luminescent ß-Diketone Dye with Rapid Recovery.

Mechanochromic luminescent (ML) materials, which show a change in emission due to an applied mechanical stimulus, are useful components in a variety of applications, including organic light-emitting diodes, force sensors, optical memory storage, and next-generation lighting materials. While there are many different ML active derivatives, few show room temperature self-erasing. Thin films of the methoxy substituted ß-diketone, gbmOMe, initially exhibited blue (428 nm) emission; however, green (478 nm) emission was observed after smearing. The mechanically generated smeared state recovered so rapidly that characterization of its emission was difficult at room temperature using traditional luminescence techniques. Thus, a new complementary metal oxide semiconductor camera imaging method was developed and used to calculate the decay time of the mechanically generated smeared state (i.e., smeared-state decay; τSM) for gbmOMe thin films. Additionally, this method was used to evaluate substrate and film thickness effects on ML recovery for glass and weighing paper films. The recovery behavior of gbmOMe was largely substrate-independent for the indicated matrixes; however, thickness effects were observed. Thus, film thickness may be the main factor in determining ML recovery behavior and must be accounted for when comparing the recovery dynamics of different ML materials. Moreover, when heated above the melting point (Tm = 119 °C), bulk gbmOMe powders assumed a metastable state that eventually crystallized after a few minutes at room temperature. However, melted thin films remained in an amorphous state indefinitely despite annealing at different temperatures (50-110 °C). The amorphous phase was identified as a supercooled liquid via changing the rate of cooling in differential scanning calorimetry thermograms.

Luminescent Difluoroboron ß-Diketonate PLA-PEG Nanoparticle.

Luminescent difluoroboron ß-diketonate poly(lactic acid) (BF2bdkPLA) materials serve as biological imaging agents. In this study, dye structures were modified to achieve emission colors that span the visible region with potential for multiplexing applications. Four dyes with varying π-conjugation (phenyl, naphthyl) and donor groups (-OMe, -NMe2) were coupled to PLLA-PEG block copolymers (∼11 kDa) by a postpolymerization Mitsunobu reaction. The resulting dye-polymer conjugates were fabricated as nanoparticles (∼55 nm diameter) to produce nanomaterials with a range of emission colors (420-640 nm). For increased stability, dye-PLLA-PEG conjugates were also blended with dye-free PDLA-PEG to form stereocomplex nanoparticles of smaller size (∼45 nm diameter). The decreased dye loading in the stereoblocks blue-shifted the emission, generating a broader range of fluorescence colors (410-620 nm). Tumor accumulation was confirmed in a murine model through biodistribution studies with a red emitting dimethyl amino-substituted dye-polymer analogue. The synthesis, optical properties, oxygen-sensing capabilities, and stability of these block copolymer nanoparticles are presented.

Stimuli Responsive Furan and Thiophene Substituted Difluoroboron ß-Diketonate Materials.

Difluoroboron ß-diketonate (BF2bdk) compounds exhibit solid-state switchable luminescence under excitation by UV light. This property is usually manifested as a blue-shift in emission when dye films are thermally annealed followed by a red-shift in response to mechanical shear (i.e. mechanochromic luminescence). Here we report thiophene and furan heterocycle-substituted dyes bearing short methoxy and long dodecyloxy chain substituents. Optical properties of the dyes were investigated in solution, pristine powders, and films on paper and glass. The structural and thermal properties of the dyes were also investigated by powder x-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The methoxy-substituted dyes exhibited neither thermal nor mechano-responsive behavior, however, addition of a longer C12 alkoxyl chain substituent resulted in stimuli-responsive behavior. The furan and thiophene dodecyloxy-substituted dyes both exhibit high-contrast reversible luminescence switching between crystalline, blue-shifted and amorphous red-shifted emissive states. For the furan dye, gentle heating produced a green emissive form while melting followed by rapid cooling produced an orange emissive form. The thiophene dye, on the other hand, exhibited blue-shifted emission when annealed below its melting temperature and red-shifted emission when smeared with a cotton swab (mechanochromic luminescence). These transformations for both dyes were found to be completely reversible, making them potential candidates for applications requiring reusable, functional materials.

Multi-stimuli responsive luminescent azepane-substituted ß-diketones and difluoroboron complexes.

Difluoroboron ß-diketonate (BF2bdk) compounds show environment-sensitive optical properties in solution, aggregation-induced emission (AIE) and multi-stimuli responsive fluorescence switching in the solid state. Here, a series of 4-azepane-substituted ß-diketone (bdk) ligands (L-H, L-OMe, L-Br) and their corresponding difluoroboron dyes (D-H, D-OMe, D-Br) were synthesized, and various responsive fluorescence properties of the compounds were studied, including solvatochromism, viscochromism, AIE, mechanochromic luminescence (ML) and halochromism. Compared to the ß-diketones, the boron complexes exhibited higher extinction coefficients but lower quantum yields, and red-shifted absorption and emission in CH2Cl2. Computational studies showed that intramolecular charge transfer (ICT) dominated rather than π-π* transitions in all the compounds regardless of boron coordination. In solution, all the bdk ligands and boron dyes showed red-shifted emission in more polar solvents and increased fluorescence intensity in more viscous media. Upon aggregation, the emission of the ß-diketones was quenched, however, the boronated dyes showed increased emission, indicative of AIE. Solid-state emission properties, ML and halochromism, were investigated on spin cast films. For ML, smearing caused a bathochromic emission shift for L-Br, and powder X-ray diffraction (XRD) patterns showed that the "as spun" and thermally annealed states were more crystalline and the smeared state was amorphous. No obvious ML emission shift was observed for L-H or L-OMe, and the boronated dyes were not mechano-active. Trifluoroacetic acid (TFA) and triethylamine (TEA) vapors were used to study halochromism. Large hypsochromic emission shifts were observed for all the compounds after TFA vapor was applied, and reversible fluorescence switching was achieved using the acid/base pair.

Oxygen-Sensing Difluoroboron Thienyl Phenyl ß-Diketonate Polylactides.

Difluoroboron ß-diketonate-polylactides are versatile oxygen-sensing materials. These materials have both fluorescence (F) and oxygen-sensitive, room-temperature phosphorescence (RTP). The fluorescence, being insensitive to oxygen, can act as an internal standard to the changing phosphorescence, and ratiometric sensing of oxygen can be achieved with these simple, single-component materials. To expand the range of colors for this family of fluorophores, a series of thienyl-phenyl-substituted dyes were synthesized with initiator sites for the ring-opening polymerization of lactide. Heavy atoms (Br and I) were added to the dye to modulate the phosphorescence intensity. These halide-substituted thiophene dyes readily aggregated in the poly(lactic acid) (PLA) matrix, generating two fluorescence peaks in air, one for monomer emission and another for aggregate emission. When the dye was dilute in PLA, as a blend, the iodo-thienyl derivative showed impressive singlet-triplet splitting, with blue fluorescence (440 nm) and orange phosphorescence (585 nm), the largest gap recorded for a boron ß-diketonate dye. Nanoparticles fabricated from a mixture of PLA and dye-PLA conjugated polymer benefited from the large singlet-triplet splitting to yield oxygen sensitivity at levels between 0 and 21 %, which can be utilized in biological oxygen-sensing applications.

Difluoroboron ß-Diketonate Materials with Long-Lived Phosphorescence Enable Lifetime Based Oxygen Imaging with a Portable Cost Effective Camera.

Lifetime-based oxygen imaging is useful in many biological applications but instrumentation can be stationary, expensive, and complex. Herein, we present a portable, cost effective, simple alternative with high spatiotemporal resolution that uses a complementary metal oxide silicon (CMOS) camera to measure oxygen sensitive lifetimes on the millisecond scale. We demonstrate its compatibility with difluoroboron ß-diketonate poly(lactic acid) (BF2bdkPLA) polymers which are nontoxic and exhibit long-lived oxygen sensitive phosphorescence. Spatially resolved lifetimes of four BF2bdkPLA variants are measured using nonlinear least squares (NLS) and rapid lifetime determination (RLD) both of which are shown to be accurate and precise. Real-time imaging in a dynamic environment is demonstrated by determining lifetime pixel-wise. The setup costs less than $5000, easily fits into a backpack, and can operate on battery power alone. This versatility combined with the inherent utility of lifetime measurements make this system a useful tool for a wide variety of oxygen sensing applications. This study serves as an important foundation for the development of dual mode real time lifetime plus ratiometric imaging with bright, long lifetime difluoroboron ß-diketonate probes.

Thienyl Difluoroboron ß-Diketonates in Solution and Polylactide Media.

Difluoroboron ß-diketonates have impressive optical properties in both solution and the solid state. In particular, both fluorescence and room-temperature phosphorescence are present when the dyes are confined to a rigid matrix, such as poly(lactic acid) (PLA). To expand current knowledge and color range capabilities of this unique type of multi-emitting chromophore, a series of thienyl-substituted BF2bdk complexes have been synthesized. The photophysical properties were investigated in methylene chloride solution and in the solid state as dye/PLA blends. By varying donor ability, i.e. methyl, phenyl, methoxyl, and thienyl substituents, and by changing the dye loading in the PLA media (0.1-10% dye loading) red-shifted emission was achieved, important for biological imaging applications. In dilute CH2Cl2 solution, complexes exhibited absorptions ranging from 350 - 420 nm, solid-state fluorescence in PLA ranging from 390 - 500 nm, and oxygen sensitive phosphorescence ranging from 540 - 585 nm in PLA blends. Promising candidates as dye/PLA blends serve as models for dyepolymer conjugates for application as biological oxygen nanoprobes.

Mechanochromic Luminescence and Aggregation Induced Emission of Dinaphthoylmethane ß-Diketones and Their Boronated Counterparts.

Mechanochromic luminescence has been observed in many boron coordinated ß-diketonate (BF2bdk) complexes. Recently, it was shown that the metal-free methoxy-substituted dinaphthoylmethane ß-diketone (dnmOMe) also displayed aggregation induced emission (AIE), solvatochromism, and high contrast mechanochromic luminescence (ML) that recovered rapidly at room temperature. In order to understand how substituents and boron coordination affect solution and solid-state optical properties, a series of methoxy- and bromo-substituted derivatives (dnm, dnmOMe, dnmBr, and dnmBrOMe) and their corresponding boron complexes (BF2dnm, BF2dnmOMe, BF2dnmBr, and BF2dnmBrOMe) were synthesized and their AIE, ML, and room temperature recovery properties were compared. All boron complexes exhibited red-shifted absorption and emission, in addition to larger solution and solid-state quantum yields than ß-diketones. While AIE studies show increased emission for dnmOMe and dnmBrOMe, the emission of corresponding boron complexes diminished upon aggregation. However, boron complexes were still strongly emissive in the solid state. ML properties were investigated using spin-cast films. Smearing resulted in the appearance of blue-green emission in ligands and a color change from green to yellow-orange in boron complexes. Bromide substituted derivatives showed increased room temperature recovery times compared to other dnm ligands, and boron complexes show only partial recovery over several days.