All-Fullerene-Based Cells for Nonaqueous Redox Flow Batteries.

Redox flow batteries have the potential to revolutionize our use of intermittent sustainable energy sources such as solar and wind power by storing the energy in liquid electrolytes. Our concept study utilizes a novel electrolyte system, exploiting derivatized fullerenes as both anolyte and catholyte species in a series of battery cells, including a symmetric, single species system which alleviates the common problem of membrane crossover. The prototype multielectron system, utilizing molecular based charge carriers, made from inexpensive, abundant, and sustainable materials, principally, C and Fe, demonstrates remarkable current and energy densities and promising long-term cycling stability.

In situ X-ray absorption near edge structure studies and charge transfer kinetics of Na6[V10O28] electrodes.

Polyoxometalates (POMs) have been reported as promising electrode materials for energy storage applications due to their ability to undergo fast redox reactions with multiple transferred electrons per polyanion. Here we employ a polyoxovanadate salt, Na6[V10O28], as an electrode material in a lithium-ion containing electrolyte and investigate the electron transfer properties of Na6[V10O28] on long and short timescales. Looking at equilibrated systems, in situ V K-edge X-ray absorption near edge structure (XANES) studies show that all 10 V5+ ions in Na6[V10O28] can be reversibly reduced to V4+ in a potential range of 4-1.75 V vs. Li/Li+. Focusing on the dynamic response of the electrode to potential pulses, the kinetics of Na6[V10O28] electrodes and the dependence of the fundamental electron transfer rate k0 on temperature are investigated. From these measurements we calculate the reorganization energy and compare it with theoretical predictions. The experimentally determined reorganization energy of λ = 184 meV is in line with the theoretical estimate and confirms the hypothesis of small values of λ for POMs due to electrostatic shielding of the redox center from the solvent.

A novel SWCNT-polyoxometalate nanohybrid material as an electrode for electrochemical supercapacitors.

A novel nanohybrid material that combines single-walled carbon nanotubes (SWCNTs) with a polyoxometalate (TBA)5[PVMoO40] (TBA-PV2Mo10, TBA: [(CH3(CH2)3)4N](+), tetra-n-butyl ammonium) is investigated for the first time as an electrode material for supercapacitors (SCs) in this study. The SWCNT-TBA-PV2Mo10 material has been prepared by a simple solution method which electrostatically attaches anionic [PV2Mo10O40](5-) anions with organic TBA cations on the SWCNTs. The electrochemical performance of SWCNT-TBA-PV2Mo10 electrodes is studied in an acidic aqueous electrolyte (1 M H2SO4) by galvanostatic charge/discharge and cyclic voltammetry. In this SWCNT-TBA-PV2Mo10 nanohybrid material, TBA-PV2Mo10 provides redox activity while benefiting from the high electrical conductivity and high double-layer capacitance of the SWCNTs that improve both energy and power density. An assembled SWCNT-TBA-PV2Mo10 symmetric SC exhibits a 39% higher specific capacitance as compared to a symmetric SC employing only SWCNTs as electrode materials. Furthermore, the SWCNT-TBA-PV2Mo10 SC exhibits excellent cycling stability, retaining 95% of its specific capacitance after 6500 cycles.

A polyoxovanadate as an advanced electrode material for supercapacitors.

Polyoxovanadate Na(6)V(10)O(28) is investigated for the first time as electrode material for supercapacitors (SCs). The electrochemical properties of Na(6)V(10)O(28) electrodes are studied in Li(+) -containing organic electrolyte (1 M LiClO(4) in propylene carbonate) by galvanostatic charge/discharge and cyclic voltammetry in a three-electrode configuration. Na(6)V(10)O(28) electrodes exhibit high specific capacitances of up to 354 F g(-1). An asymmetric SC with activated carbon as positive electrode and Na(6)V(10)O(28) as negative electrode is fabricated and exhibits a high energy density of 73 Wh kg(-1) with a power density of 312 W kg(-1), which successfully demonstrates that Na(6)V(10)O(28) is a promising electrode material for high-energy SC applications.

Synthesis and characterization of multinuclear manganese-containing tungstosilicates.

The five manganese-containing, Keggin-based tungstosilicates [Mn(II)3(OH)3(H2O)3(A-α-SiW9O34)](7-) (1), [Mn(III)3(OH)3(H2O)3(A-α-SiW9O34)](4-) (2), [Mn(III)3(OH)3(H2O)3(A-ß-SiW9O34)](4-) (3), [Mn(III)3Mn(IV)O3(CH3COO)3(A-α-SiW9O34)](6-) (4), and [Mn(III)3Mn(IV)O3(CH3COO)3(A-ß-SiW9O34)](6-) (5) were synthesized in aqueous medium by interaction of [A-α-SiW9O34](10-) or [A-ß-SiW9O34H](9-) with either MnCl2 (1) or [Mn(III)8Mn(IV)4O12(CH3COO)16(H2O)4] (2-5) under carefully adjusted reaction conditions. The obtained salts of these polyanions were analyzed in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric analysis. The salts of polyanions 1, 2, and 4 were further characterized in the solid state by magnetic studies, as well as in solution by electrochemistry.

Single mode quantum cascade lasers with shallow-etched distributed Bragg reflector.

We report the fabrication of single mode quantum cascade lasers using a shallow-etched distributed Bragg reflector as frequency selective element. Quasi-continuous single mode tuning over 15 cm-1 at room temperature and 25 cm-1 via temperature tuning at Peltier temperatures is demonstrated. The behavior of both electro-optic and spectral characteristics under variation of the segment currents is analyzed, showing a maximum peak output power at room temperature of 600 mW. Thermal crosstalk between the laser segments is investigated. The spectral resolution of a gas absorption experiment is determined to be better than 0.0078 cm-1.