Spatial Confinement of Co Nanoparticles in N-Doped Carbon Nanorods for Wastewater Purification via CaSO3 Activation.

Spatial confinement of organic pollutants and reactive oxygen species (e.g., SO4•- and •OH) with ultrashort lifetime inside the scale of chemical theoretical diffusion could provide a greatly promising strategy to overcome the limitation of mass transfer in the heterogeneous Fenton-like oxidation process. Herein, we first reported spatial confinement of cobalt nanoparticles in N-doped carbon nanorods (Co-NCNRs), by encapsulating Co nanoparticles into N-doped carbon nanorods, in activating CaSO3 for antibiotic degradation. Compared to Na2SO3 and NaHSO3, CaSO3 could slowly and persistently discharge SO32- due to its low solubility, thus avoiding the depletion of the generated SO3•- and •OH under the high concentration of sulfite ions. Fully physical characterizations confirmed that the 3D hydrogel was mostly transformed into the nanorod structure of Co-NCNRs at 550 °C. Co atoms were successfully nanoconfined into N-doped carbon nanorods, which contributes to mass transfer and prevents the agglomeration of Co nanoparticles, thus enhancing its catalytic activity and stability in activating CaSO3 for water decontamination. The catalytic performance, kinetic research, influences of inorganic anions, pH, and degradation mechanism of chlortetracycline degradation catalyzed by the Co-NCNRs/CaSO3 system have been studied in detail. This work not only proposed a facile method for synthesis of nanoconfined catalyst but also provided an excellent Co-NCNRs/CaSO3 system for wastewater treatment.

Atomically Precise Silver Clusters Stabilized by Lacunary Polyoxometalates with Photocatalytic CO2 Reduction Activity.

The syntheses of atomically precise silver (Ag) clusters stabilized by multidentate lacunary polyoxometalate (POM) ligands have been emerging as a promising but challenging research direction, the combination of redox-active POM ligands and silver clusters will render them unexpected geometric structures and catalytic properties. Herein, we report the successful construction of two structurally-new lacunary POM-stabilized Ag clusters, TBA6 H14 Ag14 (DPPB)4 (CH3 CN)9 [Ag24 (Si2 W18 O66 )3 ] ⋅ 10CH3 CN ⋅ 9H2 O ({Ag24 (Si2 W18 O66 )3 }, TBA=tetra-n-butylammonium, DPPB=1,4-Bis(diphenylphosphino)butane) and TBA14 H6 Ag9 Na2 (H2 O)9 [Ag27 (Si2 W18 O66 )3 ] ⋅ 8CH3 CN ⋅ 10H2 O ({Ag27 (Si2 W18 O66 )3 }), using a facile one-pot solvothermal approach. Under otherwise identical synthetic conditions, the molecular structures of two POM-stabilized Ag clusters could be readily tuned by the addition of different organic ligands. In both compounds, the central trefoil-propeller-shaped {Ag24 }14+ and {Ag27 }17+ clusters bearing 10 delocalized valence electrons are stabilized by three C-shaped {Si2 W18 O66 } units. The femtosecond/nanosecond transient absorption spectroscopy revealed the rapid charge transfer between {Ag24 }14+ core and {Si2 W18 O66 } ligands. Both compounds have been pioneeringly investigated as catalysts for photocatalytic CO2 reduction to HCOOH with a high selectivity.

Facile MOF Support Improvement in Synergy with Light Acceleration for Efficient Nanoalloy-Catalyzed H2 Production from Formic Acid.

Hydrogen (H2) generation and storage are actively investigated to provide a green source of energy, and formic acid (HCOOH), a major product obtained from the biomass, is regarded as a productive source of H2. Therefore, improvements in heterogeneous catalysts are called for. Here, a novel type of catalyst support is proposed involving simple addition of the mixture of metal ion precursors to core-shell ZIF-8@ZIF-67, followed by reduction with NaBH4, with performances surpassing those obtained using nanocatalysts in ZIF-8 or ZIF-67. The nanocatalysts PdxAg were optimized with ZIF-8@Pd2Ag1@ZIF-67 under visible-light illumination for selective HCOOH dehydrogenation involving a turnover frequency value of 430 h-1 under light irradiation at 353 K. These results also reveal the crucial roles of the Pd sites electronically promoted in the presence of visible light by the Ag plasmon resonance and the advantageous core-shell MOF structure. In order to examine the potential of extending this catalyst improvement principle to other catalytic reactions, 4-nitrophenol reduction, a benchmarking model of catalytic reaction, was tested, and the results also confirmed the superiority of the performance of ZIF-8@Pd2Ag1@ZIF-67 over Pd2Ag1@ZIF-8 and Pd2Ag1@ZIF-67, confirming the interest in the novel catalyst design.

Robust Enantiomeric Two-Dimensional Assembly of Atomically Precise Silver Clusters.

The facile syntheses of enantiomeric atomically precise silver clusters starting from achiral ligands remain a substantial challenge to explore. In this work, a pair of atomically precise enantiomers of R/S-[Ag17Cl(iPrS)9S(CH3COO)5H2O] (R/S-Ag17, iPrS = isopropanethiolate) clusters have been synthesized using a viable solvothermal approach. The chirality of the resulting enantiomeric R/S-Ag17 clusters is attributed to the asymmetric arrangement of surface achiral ligands. Both R/S-Ag17 enantiomers could form the two-dimensional (2D) assemblies via intercluster interactions of basic building blocks containing Ag16S8 moieties, iPrS-Ag motifs, and S2- linkers. Such a small ligand-induced 2D assembly greatly contributes to the enhancement of thermal stability and photocatalytic activity of R/S-Ag17 clusters, providing possibilities for exploring robust coinage cluster-based assembly with attractive catalytic properties.

The Metallocene Battery: Ultrafast Electron Transfer Self Exchange Rate Accompanied by a Harmonic Height Breathing.

The first all-metallocene rechargeable battery consisting of poly-cobaltocenium/- and poly-ferrocene/reduced graphene oxide composites as anode and cathode was prepared. The intrinsically fast ET self-exchange rate of metallocenes was successfully combined with an efficient ion-percolation achieved by molecular self-assembly. The resulting battery materials show ideal Nernstian behavior, is thickness scalable up to >1.2 C cm-2 , and exhibit high coulombic efficiency at ultrafast rates (200 A g-1 ). Using aqueous LiClO4 , the charge is carried exclusively by the anion. The ClO4 - intercalation is accompanied by a reciprocal height change of the active layers. Principally, volume changes in organic battery materials during charging/discharging are not desirable and represent a major safety issue. However, here, the individual height changes-due to ion breathing-are reciprocal and thus prohibiting any internal pressure build-up in the closed-cell, leading to excellent cycling stability.

Pentadecanuclear Fe-Containing Polyoxometalate Catalyst for Visible-Light-Driven Generation of Hydrogen.

The structurally new, carbon-free pentadecanuclear Fe-containing polyoxometalate, Na21[NaFe15(OH)12(PO4)4(A-α-SiW9O34)4]·85H2O (Na21-Fe15P4(SiW9)4), was synthesized using a facile one-pot, solution-based synthetic approach and systematically characterized by various spectroscopic techniques. Single-crystal X-ray diffraction reveals that the title complex is composed of two [Fe4(A-α-SiW9O34)] fragments and two [Fe3.5(A-α-SiW9O34)] fragments stabilized by four PO4 linkers in a tetrameric style with idealized Td point group symmetry. When coupling with (4,4'-ditert-butyl-2,2'-dipyridyl)-bis(coumarin)-iridium(III) hexafluorophosphate ([Ir(coumarin)2(dtbbpy)][PF6]) photosensitizer and triethanolamine (TEOA) sacrificial electron donor, polyoxoanion Fe15P4(SiW9)4 effectively catalyzed hydrogen production with a minimally optimized TON of 986, which represents, to our knowledge, one of the highest values among known Fe-substituted POM-catalyzed hydrogen production systems. Both a mercury-poisoning test and FT-IR characterizations proved the structural stability of Fe15P4(SiW9)4 catalyst under photocatalytic conditions. The photocatalytic mechanism of the present hydrogen-evolving system was investigated by time-solved luminescence and static emission quenching measurements.

Visible-Light Acceleration of H2 Evolution from Aqueous Solutions of Inorganic Hydrides Catalyzed by Gold-Transition-Metal Nanoalloys.

Production of hydrogen (H2) upon hydrolysis of inorganic hydrides potentially is a key step in green energy production. We find that visible-light irradiation of aqueous solutions of ammonia-borane (AB) or NaBH4 containing "click"-dendrimer-stabilized alloyed nanocatalysts composed of nanogold and another late transition-metal nanoparticle (LTMNP) highly enhances catalytic activity for H2 generation while also inducing alloy to Au core@M shell nanocatalyst restructuration. In terms of visible-light-induced acceleration of H2 production from both AB and NaBH4, the Au1Ru1 alloy catalysts show the most significant light-boosting effect. Au-Rh and Au-PtNPs are also remarkable with total H2 release time from AB and NaBH4 down to 1.3 min at 25 °C (AuRh), 3 times less than in the dark, and Co is the best earth-abundant metal alloyed with nanogold. This boosting effect is explained by the transfer of plasmon-induced hot electron from the Au atoms to the LTMNP atoms facilitating water O-H oxidative addition on the LTMNP surface, as shown by the large primary kinetic isotope effect kH/kD upon using D2O obtained for both AB and NaBH4. The second simultaneous and progressive effect of visible-light irradiation during these reactions, alloy to Au core@M shell restructuration, enhances the catalytic activity in the recycling, because, in the resulting Au core@M shell, the surface metal (such as Ru) is much more active than the original Au-containing alloy surface in dark reactions. There is no light effect on the rate of hydrogen production for the recycled nanocatalyst because of the absence of Au on the NP surface, but it is still very efficient in hydrogen release during four cycles because of the initial light-induced restructuration, although it is slightly less efficient than the original nanoalloy in the presence of light. The dendritic triazole coordination on each LTMNP surface appears to play a key role in these remarkable light-induced processes.

Hydrogen Generation upon Nanocatalyzed Hydrolysis of Hydrogen-Rich Boron Derivatives: Recent Developments.

ConspectusProduction of hydrogen from nonfossil sources is essential toward the generation of sustainable energy. Hydrogen generation upon hydrolysis of stable hydrogen-rich materials has long been proposed as a possibility of hydrogen disposal on site, because transport of explosive hydrogen gas is dangerous. Hydrolysis of some boron derivatives could rapidly produce large amounts of hydrogen, but this requires the presence of very active catalysts. Indeed, late transition-metal nanocatalysts have recently been developed for the hydrolysis of a few hydrogen-rich precursors.Our research group has focused on the improvement and optimization of highly performing Earth-abundant transition-metal-based nanocatalysts, optimization of remarkable synergies between different metals in nanoalloys, supports including positive synergy with nanoparticles (NPs) for rapid hydrogen generation, comparison between various endo- or exoreceptors working as homogeneous and heterogeneous supports, mechanistic research, and comparison of the nanocatalyzed hydrolysis of several boron hydrides.First, hydrogen production upon hydrolysis of ammonia borane, AB (3 mol H2 per mol AB) was examined with heterogeneous endoreceptors. Thus, a highly performing Ni@ZIF-8 nanocatalyst was found to be superior over other Earth-abundant nanocatalysts and supports. With 85.7 molH2·molcat-1·min-1 at 25 °C, this Ni nanocatalyst surpassed the results of previous Earth-abundant nanocatalysts. The presence of NaOH accelerated the reaction, and a remarkable pH-dependent "on-off" control of the H2 production was established. Bimetallic nanoalloys Ni-Pt@ZIF-8 showed a dramatic volcano effect optimized with a nanoalloy containing 2/3 Ni and 1/3 Pt. The rate reached 600 molH2·molcat-1·min-1 and 2222 molH2·molPt-1·min-1 at 20 °C, which much overtook the performances of both related nanocatalysts Ni@ZIF-8 and Pt@ZIF-8. Next, hydrogen production was also researched via hydrolysis of sodium borohydride (4 mol H2 per mol NaBH4) using nanocatalysts in ZIF-8, and, among Earth-abundant nanocatalysts, Co@ZIF-8 showed the best performance, outperforming previous Co nanocatalysts. For exoreceptors, "click" dendrimers containing triazole ligands on their tripodal tethers were used as supports for homogeneous (semiheterogeneous) catalysis of both AB and NaBH4 hydrolysis. For both reactions, Co was found to be the best Earth-abundant metal, Pt the best noble metal, and Co1Pt1 the best nanoalloy, with synergistic effects. Based on kinetic measurements and kinetic isotope effects for all of these reactions, mechanisms are proposed and the hydrogen produced was further used in tandem reactions. Overall, dramatic triple synergies between these nanocatalyst components have allowed hydrogen release within a few seconds under ambient conditions. These nanocatalyst improvements and mechanistic findings should also inspire further nanocatalyst design in various areas of hydrogen production.

Stabilization of a new nanocomposite family by reduction of gold nanoclusters with electron-reservoir complexes.

Four stable 19-electron Fe and Co sandwich electron-reservoirs and three hydride reservoir complexes reduce the prototypal nanocluster Au25(SR)18 (R = CH2CH2Ph) leading to a largely increased kinetic stabilization of the anionic nanocluster form compared to previously known nanocluster anion salts; these salts represent new and robust nanocomposite anionic gold clusters with 18-electron sandwich complexes as counter cations.

KSCN-induced Interfacial Dipole in Black TiO2 for Enhanced Photocatalytic CO2 Reduction.

Tuning the electronic band structure of black titania to improve photocatalytic performance through conventional band engineering methods has been challenging because of the defect-induced charge carrier and trapping sites. In this study, KSCN-modified hydrogenated nickel nanocluster-modified black TiO2 (SCN-H-Ni-TiO2) exhibits enhanced photocatalytic CO2 reduction due to the interfacial dipole effect. Upon combining the experimental and theoretical simulation approach, the presence of an electrostatic interfacial dipole associated with chemisorption of SCN has dramatic effects on the photocatalyst band structure in SCN-H-Ni-TiO2. An interfacial dipole possesses a more negative zeta potential shift of the isoelectric point from 5.20 to 3.20, which will accelerate the charge carrier separation and electron transfer process. Thiocyanate ion passivation on black TiO2 demonstrated an increased work function around 0.60 eV, which was induced by the interracial dipole effect. Overall, the SCN-H-Ni-TiO2 photocatalyst showed an enhanced CO2 reduction to solar fuel yield by 2.80 times higher than H-Ni-TiO2 and retained around 88% product formation yield after 40 h.

Highly Selective and Sharp Volcano-type Synergistic Ni2Pt@ZIF-8-Catalyzed Hydrogen Evolution from Ammonia Borane Hydrolysis.

Ammonia borane hydrolysis is considered as a potential means of safe and fast method of H2 production if it is efficiently catalyzed. Here a series of nearly monodispersed alloyed bimetallic nanoparticle catalysts are introduced, optimized among transition metals, and found to be extremely efficient and highly selective with sharp positive synergy between 2/3 Ni and 1/3 Pt embedded inside a zeolitic imidazolate framework (ZIF-8) support. These catalysts are much more efficient for H2 release than either Ni or Pt analogues alone on this support, and for instance the best catalyst Ni2Pt@ZiF-8 achieves a TOF of 600 molH2·molcatal-1·min-1 and 2222 molH2·molPt-1·min-1 under ambient conditions, which overtakes performances of previous Pt-base catalysts. The presence of NaOH boosts H2 evolution that becomes 87 times faster than in its absence with Ni2Pt@ZiF-8, whereas NaOH decreases H2 evolution on the related Pt@ZiF-8 catalyst. The ZIF-8 support appears outstanding and much more efficient than other supports including graphene oxide, active carbon and SBA-15 with these nanoparticles. Mechanistic studies especially involving kinetic isotope effects using D2O show that cleavage by oxidative addition of an O-H bond of water onto the catalyst surface is the rate-determining step of this reaction. The remarkable catalyst activity of Ni2Pt@ZiF-8 has been exploited for successful tandem catalytic hydrogenation reactions using ammonia borane as H2 source. In conclusion the selective and remarkable synergy disclosed here together with the mechanistic results should allow significant progress in catalyst design toward convenient H2 generation from hydrogen-rich substrates in the close future.

Electron Flow in Large Metallomacromolecules and Electronic Switching of Nanoparticle Stabilization: Click Ferrocenyl Dentromers that Reduce AuIII to Au Nanoparticles.

Click ferrocenyl-terminal dentromers, a family of arene-cored dendrimers with triple branching (9-Fc, 27-Fc, 81-Fc, and 243-Fc), reduce AuIII to ferricinium dentromer-stabilized Au nanoparticles (AuNPs). Cyclic voltammetry studies in CH2 Cl2 show reversible CV waves with some adsorption for the 243-Fc dentromer and the number of redox groups found, 255±25, by using the Bard-Anson method, is close to the theoretical number of 243. The dentromers reduce aqueous HAuCl4 to water-soluble ferricinium chloride dentromer-stabilized AuNPs with core sizes between 30 and 47 nm. These triazolylferricinium dentromer-stabilized AuNPs are reduced by cobaltocene to cobalticinium chloride and ferrocene dentromer weakly stabilized AuNPs together with a redshift of the AuNP plasmon. The weakness of the AuNP stabilization is characterized by dentromer extraction with CH2 Cl2 along with irreversible AuNP agglomeration for the 9, 27, and 81-ferrocenyl dentromer, with only the 243-ferrocenyl dentromer-AuNP withstanding this process. Altogether, this demonstrates the electronic switching of the dentromer-mediated AuNP stabilization.

Electron- and Hydride-Reservoir Organometallics as Precursors of Catalytically Efficient Transition Metal Nanoparticles in Water.

Nanoparticles (NPs) are actively investigated for their efficient use in catalysis, but their means of synthesis is a key factor influencing their catalytic properties owing to surface coverage with byproducts. Here, neutral electron- and hydride-rich late transition metal organometallics are compared for the synthesis of late transition metal NPs in the presence of poly(vinylpirolidone) (PVP). In particular, the effect of electron-reservoir donors, hydride-reservoir donors, and electron-rich dimers yielding NPs electrostatically stabilized by cationic organometallics are compared in terms of NP size and catalytic efficiency. The catalytic reactions scrutinized with excellent results include 4-nitrophenol reduction to 4-aminophenol by NaBH4 for the AuNPs and PdNPs, and Suzuki-Miyaura reactions for the PdNPs. The nature of the reductant has more influence on the NP size in the case of AuNPs than PdNPs, and the best NP catalysts are obtained with hydride-reservoir complexes as reductants. The less bulky hydride donors are superior, with the complex [CoCp(ŋ4 -C5 H6 )] (Cp=ŋ5 -C5 H5 ) giving the NPs with the best catalyst efficiencies for both reactions. Protection of the NP cores by the organometallic sandwich salt is found to be the key to catalytic efficiency.

Carbon-doped SnS2 nanostructure as a high-efficiency solar fuel catalyst under visible light.

Photocatalytic formation of hydrocarbons using solar energy via artificial photosynthesis is a highly desirable renewable-energy source for replacing conventional fossil fuels. Using an L-cysteine-based hydrothermal process, here we synthesize a carbon-doped SnS2 (SnS2-C) metal dichalcogenide nanostructure, which exhibits a highly active and selective photocatalytic conversion of CO2 to hydrocarbons under visible-light. The interstitial carbon doping induced microstrain in the SnS2 lattice, resulting in different photophysical properties as compared with undoped SnS2. This SnS2-C photocatalyst significantly enhances the CO2 reduction activity under visible light, attaining a photochemical quantum efficiency of above 0.7%. The SnS2-C photocatalyst represents an important contribution towards high quantum efficiency artificial photosynthesis based on gas phase photocatalytic CO2 reduction under visible light, where the in situ carbon-doped SnS2 nanostructure improves the stability and the light harvesting and charge separation efficiency, and significantly enhances the photocatalytic activity.

Ni-Nanocluster Modified Black TiO2 with Dual Active Sites for Selective Photocatalytic CO2 Reduction.

One of the key challenges in artificial photosynthesis is to design a photocatalyst that can bind and activate the CO2 molecule with the smallest possible activation energy and produce selective hydrocarbon products. In this contribution, a combined experimental and computational study on Ni-nanocluster loaded black TiO2 (Ni/TiO2[Vo] ) with built-in dual active sites for selective photocatalytic CO2 conversion is reported. The findings reveal that the synergistic effects of deliberately induced Ni nanoclusters and oxygen vacancies provide (1) energetically stable CO2 binding sites with the lowest activation energy (0.08 eV), (2) highly reactive sites, (3) a fast electron transfer pathway, and (4) enhanced light harvesting by lowering the bandgap. The Ni/TiO2[Vo] photocatalyst has demonstrated highly selective and enhanced photocatalytic activity of more than 18 times higher solar fuel production than the commercial TiO2 (P-25). An insight into the mechanisms of interfacial charge transfer and product formation is explored.

Exposure to air boosts CuAAC reactions catalyzed by PEG-stabilized Cu nanoparticles.

New PEG-stabilized CuNP catalysts are designed upon Cu(ii) reduction with sodium naphthalenide in MeCN followed by simple purification using the salting-out effect. Their catalytic activity in CuAAC is boosted upon 30 min exposure to air, producing Cu2O NPs. These NPs are also supported on SBA-15, providing excellent recyclable heterogeneous catalysts that are applied in low amounts for efficient "click" functionalization.

The Magic Au60 Nanocluster: A New Cluster-Assembled Material with Five Au13 Building Blocks.

Herein, we report the synthesis and atomic structure of the cluster-assembled [Au60Se2(Ph3P)10(SeR)15](+) material. Five icosahedral Au13 building blocks from a closed gold ring with Au-Se-Au linkages. Interestingly, two Se atoms (without the phenyl tail) locate in the center of the cluster, stabilized by the Se-(Au)5 interactions. The ring-like nanocluster is unprecedented in previous experimental and theoretical studies of gold nanocluster structures. In addition, our optical and electrochemical studies show that the electronic properties of the icosahedral Au13 units still remain unchanged in the penta-twinned Au60 nanocluster, and this new material might be a promising in optical limiting material. This work offers a basis for deep understanding on controlling the cluster-assembled materials for tailoring their functionalities.

Au25 clusters as electron-transfer catalysts induced the intramolecular cascade reaction of 2-nitrobenzonitrile.

Design of atomically precise metal nanocluster catalysts is of great importance in understanding the essence of the catalytic reactions at the atomic level. Here, for the first time, Au25(z) nanoslusters were employed as electron transfer catalysts to induce an intramolecular cascade reaction at ambient conditions and gave rise to high conversion (87%) and selectivity (96%). Electron spin-resonance spectra indeed confirmed the consecutive electron transfer process and the formation of N radical. UV-vis absorption spectra also verified Au25(z) was intact after the catalytic circle. Our research may open up wide opportunities for extensive organic reactions catalyzed by Au25(z).

Design of an ultrasmall Au nanocluster-CeO2 mesoporous nanocomposite catalyst for nitrobenzene reduction.

In this work we are inspired to explore gold nanoclusters supported on mesoporous CeO2 nanospheres as nanocatalysts for the reduction of nitrobenzene. Ultrasmall Au nanoclusters (NCs) and mesoporous CeO2 nanospheres were readily synthesized and well characterized. Due to their ultrasmall size, the as-prepared Au clusters can be easily absorbed into the mesopores of the mesoporous CeO2 nanospheres. Owing to the unique mesoporous structure of the CeO2 support, Au nanoclusters in the Au@CeO2 may effectively prevent the aggregation which usually results in a rapid decay of the catalytic activity. It is notable that the ultrasmall gold nanoclusters possess uniform size distribution and good dispersibility on the mesoporous CeO2 supports. Compared to other catalyst systems with different oxide supports, the as-prepared Au nanocluster-CeO2 nanocomposite nanocatalysts showed efficient catalytic performance in transforming nitrobenzene into azoxybenzene. In addition, a plausible mechanism was deeply investigated to explain the transforming process. Au@CeO2 exhibited efficient catalytic activity for reduction of nitrobenzene. This strategy may be easily extended to fabricate many other heterogeneous catalysts including ultrasmall metal nanoclusters and mesoporous oxides.