RESUMEN
Simultaneous high-speed stereo-particle image velocimetry, OH planar-laser-induced fluorescence (PLIF), and CH2O PLIF measurements in a vitiated bluff body combustor are considered. An ex situ, simultaneous, time-resolved laser sheet intensity profile correction procedure is introduced. This procedure is easily implemented experimentally and is capable of correcting multiple sheets at the same time. As a proof of concept, the procedure is applied to perform correction of the CH2O PLIF images in vitiated and unvitiated conditions. The challenges associated with CH2O PLIF under these combustor operating conditions are also discussed.
RESUMEN
Megahertz-rate hydroxyl radical planar laser-induced fluorescence (OH-PLIF) was demonstrated in a hydrogen/air rotating detonation combustor for the first time, to the best of our knowledge. A custom injection-seeded optical parametric oscillator (OPO) pumped by the 355 nm output of a high-energy burst-mode laser produced narrowband pulses near 284 nm for OH excitation. The system generated sequences of more than 150 ultraviolet pulses with 400 µJ/pulse at 1 MHz and 150 µJ/pulse at 2 MHz. The order of magnitude improvement in the repetition rate over prior OH-PLIF measurements and in the number of pulses over previous megahertz burst-mode OPOs enables spatiotemporal analysis of complex detonation combustion dynamics.
RESUMEN
Planar laser-induced fluorescence (PLIF) of hydroxyl (OH) and formaldehyde (CH2O) radicals was performed alongside stereo particle image velocimetry (PIV) at a 20 kHz repetition rate in a highly turbulent Bunsen flame. A dual-pulse burst-mode laser generated envelopes of 532 nm pulse pairs for PIV as well as a pair of 355 nm pulses, the first of which was used for CH2O PLIF. A diode-pumped solid-state Nd:YAG/dye laser system produced the excitation beam for the OH PLIF. The combined diagnostics produced simultaneous, temporally resolved two-dimensional fields of OH and CH2O and two-dimensional, three-component velocity fields, facilitating the observation of the interaction of fluid dynamics with flame fronts and preheat layers. The high-fidelity data acquired surpass the previous state of the art and demonstrate dual-pulse burst-mode laser technology with the ability to provide pulse pairs at both 532 and 355 nm with sufficient energy for scattering and fluorescence measurement at 20 kHz.
RESUMEN
This paper discusses a novel model combustion experiment that was built for studying the structure and dynamics of a reacting jet in an unsteady crossflow. A natural-gas-fired dump combustor is used to generate and sustain an acoustically oscillating vitiated flow that serves as the crossflow for transverse jet injection. Unlike most other techniques that are limited in operating pressure or acoustic amplitude, this method of generating an unsteady flow field is demonstrated at a pressure of 10 atm with peak-to-peak oscillation amplitudes approaching 20% of the mean pressure. An optically accessible test section designed for these conditions provides access for advanced laser and optical diagnostic measurements. Detailed measurements provide insight into the complex acoustic-hydrodynamic-combustion coupling processes and offer high-quality, high-resolution validation data for numerical simulations. Careful instrumentation port design considerations for the higher amplitude acoustics are detailed. As a whole, this paper focuses on select representative segments of the experiment operational space that highlight our strategy of providing an oscillatory flowfield. This includes presenting the acoustic operational space such as acoustic amplitudes, frequencies, and mode shapes. Select imaging results are then reported to support our strategies capability to produce high-fidelity measurements.