RESUMEN
Metals are essential in our daily lives and have a finite supply, being simultaneously contaminants of concern. The current carbon emissions and environmental impact of mining are untenable. We need to reclaim metals sustainably from secondary resources, like waste. Biotechnology can be applied in metal recovery from waste streams like fly ashes and bottom ashes of municipal solid waste incineration (MSWI). They represent substantial substance flows, with roughly 46 million tons of MSWI ashes produced annually globally, equivalent in elemental richness to low-grade ores for metal recovery. Next-generation methods for resource recovery, as in particular bioleaching, give the opportunity to recover critical materials and metals, appropriately purified for noble applications, in waste treatment chains inspired by circular economy thinking. In this critical review, we can identify three main lines of discussion: (1) MSWI material characterization and related environmental issues; (2) currently available processes for recycling and metal recovery; and (3) microbially assisted processes for potential recycling and metal recovery. Research trends are chiefly oriented to the potential exploitation of bioprocesses in the industry. Biotechnology for resource recovery shows increasing effectiveness especially downstream the production chains, i.e., in the waste management sector. Therefore, this critical discussion will help assessing the industrial potential of biotechnology for urban mining of municipal, post-combustion waste.
Asunto(s)
Metales Pesados , Eliminación de Residuos , Administración de Residuos , Residuos Sólidos/análisis , Incineración , Administración de Residuos/métodos , Metales , Ceniza del Carbón , Carbono , Metales Pesados/análisisRESUMEN
The inter-element relationships and the forms in which metals exist strongly influence their mobility and, in turn, have a signature on the environment and human health. Located in the northern Apennines within the Emilia-Romagna region, the Ridracoli artificial lake is one of Italy's most important reservoirs that provides drinking water for about one million people. This work characterized the reservoir sediments by ICP-MS after aqua regia digestion (ARD), comparing the limits by law to assess environmental compliance and XRF data from the same sample-set taken as total concentrations. The Degree of Extraction (DE) from pseudo-total concentrations of ARD analysis allows assessing elements mobility and the associated environmental risk. Principal Component Analysis (PCA) on the obtained data helped to investigate inter-element relationships better; for example, we observed carbonate-sourced sediments, many trace elements (e.g., Ni, Zn) linked to FeMn oxyhydroxides, the importance of the grain size in elements distribution, and the central role of the organic matter in element partitioning. In addition, a Sequential Extraction Procedure (SEP) was applied to the sediment samples to understand the partitioning of many analytes, including Potentially Harmful Elements (PHE) such as Fe, Mn, Cu, Cr, Ni, Pb, and Zn. The results indicated that the most easily mobilized forms were predominant in the area near the dam, in correspondence to sediments affected by the formation of a seasonal anoxic layer.
Asunto(s)
Metales Pesados , Contaminantes Químicos del Agua , Digestión , Monitoreo del Ambiente/métodos , Sedimentos Geológicos/análisis , Humanos , Ácido Clorhídrico , Lagos , Metales Pesados/análisis , Ácido Nítrico , Contaminantes Químicos del Agua/análisisRESUMEN
Trace Metals (TMs: Pb, Zn, Cu, Cr, Cd, and Ni), major elements (Al and Fe) and radionuclides (210Pb/137Cs) investigations on EL-C01 sediment core provides new information on sedimentary regime and anthropogenic impacts during the last 175 years in the Po river prodelta area. The results allow to identify some TMs/Al peak in the upper part of the core, likely related to the major flood events of the Po river during the XXth century. Sediments deposited after the year 1900 exhibit a gradual increase of some TMs concentrations compared to pre-industrial era values. In particular, Pb, Zn, and Cu high contents are detected after the World War II and during the "Italian Economic Miracle" period. The decrease of heavy metal (Zn and Pb) contents from the second half of the 1980s is probably the effect of the Italian Law 319/76 and anti-pollution environmental policies concerning industrial and urban emitters.
Asunto(s)
Metales Pesados , Contaminantes Químicos del Agua , Monitoreo del Ambiente/métodos , Sedimentos Geológicos , Metales Pesados/análisis , Ríos , Contaminantes Químicos del Agua/análisisRESUMEN
The sea area around Dajin Island in the Pearl River Estuary is the second-largest habitat in China for the Indo-Pacific humpback dolphin (Sousa Chinensis). However, the rapid economic development of this area brings potential threats to the aquatic ecology around Dajin Island. Real-time monitoring and evaluation of the ecological health of the sea area are urgent. In this study, band ratio and single-band inversion algorithms were performed to obtain Chlorophyll-a (Chl-a) and Suspended Sediment Concentration (SSC), relying on both Compact Airborne Spectrographic Imager (CASI) and Moderate resolution Imaging Spectrometer (MODIS) images. The CASI/Chl-a with high spatial resolution was adopted to assess the eutrophication status, while the dissolved organic carbon (DOC) concentration and chromophoric dissolved organic matter (CDOM) optical properties were used to derive the material composition and sources. The results suggest that the study area is under a low to medium eutrophication state with evenly distributed low Chl-a concentration. However, higher Chl-a is observed in the outer estuary with MODIS/Chl-a. The relatively high DOC concentration, especially in the north, where aquaculture is practiced, and near the estuary's main axis, i.e., east Dajin Island, indicates that the eutrophication state might be underestimated using satellite chlorophyll alone. CDOM optical properties indicated that terrestrial materials are the DOC's primary material sources, but the DOC derived from fishery aquaculture cannot be ignored. The low Chl-a concentration is likely due to the turbulent hydrodynamic regime caused by jet flow and reciprocating flow in this marine area. Comprehensive observation, including the assessment of different technological platforms, is suggested for the aquatic environment.
Asunto(s)
Carbono , Monitoreo del Ambiente , Carbono/análisis , China , Clorofila A , EutrofizaciónRESUMEN
Mechatronic and soft robotics are taking inspiration from the animal kingdom to create new high-performance robots. Here, we focused on marine biomimetic research and used innovative bibliographic statistics tools, to highlight established and emerging knowledge domains. A total of 6980 scientific publications retrieved from the Scopus database (1950-2020), evidencing a sharp research increase in 2003-2004. Clustering analysis of countries collaborations showed two major Asian-North America and European clusters. Three significant areas appeared: (i) energy provision, whose advancement mainly relies on microbial fuel cells, (ii) biomaterials for not yet fully operational soft-robotic solutions; and finally (iii), design and control, chiefly oriented to locomotor designs. In this scenario, marine biomimicking robotics still lacks solutions for the long-lasting energy provision, which presently hinders operation autonomy. In the research environment, identifying natural processes by which living organisms obtain energy is thus urgent to sustain energy-demanding tasks while, at the same time, the natural designs must increasingly inform to optimize energy consumption.
RESUMEN
The discharge of toxic elements from tailings soils in the aquatic environments occurs chiefly in the presence of indigenous bacteria. The biotic components may interact in the opposite direction, leading to the formation of a passivation layer, which can inhibit the solubility of the elements. In this work, the influence of jarosite on the bio-immobilization of toxic elements was studied by native bacteria. In batch experiments, the bio-immobilization of heavy metals by an inhibitory layer was examined in the different aquatic media using pure cultures of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. A variety of analyses also investigated the mechanisms of metals bio-immobilization. Among different tests, the highest metal solubility yielded 99% Mn, 91% Cr, 95% Fe, and 78% Cu using A. ferrooxidans in 9KFe medium after ten days. After 22 days, these percentages decreased down to 30% Mn and about 20% Cr, Fe, and Cu, likely due to metal immobilization by biogenic jarosite. The formation of jarosite was confirmed by an electron probe micro-analyzer (EPMA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The mechanisms of metal bio-immobilization by biogenic jarosite from tailings soil confirmed three main steps: 1) the dissolution of metal sulfides in the presence of Acidithiobacillus bacteria; 2) the nucleation of jarosite on the surface of sulfide minerals; 3) the co-precipitation of dissolved elements with jarosite during the bio-immobilization process, demonstrated by a structural study for jarosite. Covering the surface of soils by the jarosite provided a stable compound in the acidic environment of mine-waste.
Asunto(s)
Compuestos Férricos/química , Sustancias Peligrosas/análisis , Sulfatos/química , Acidithiobacillus , Acidithiobacillus thiooxidans , Bacterias , Sustancias Peligrosas/toxicidad , Metales Pesados , Minerales , Solubilidad , Sulfuros/química , Difracción de Rayos XRESUMEN
This paper reports supplementary information to "Understanding room-temperature magnetic properties of anthropogenic ashes from municipal solid waste incineration to assess potential impacts and resources" [1]. The sample-set is composed of 47 samples of bottom (BA) and fly (FA) ashes from Municipal Solid Waste Incineration (MSWI), including eight magnetic extracts of selected BA and FA materials. The sampling relies on a simple random sampling strategy at four different MSWI sites in Northern Italy [2]. X-Ray Fluorescence (XRF) analysis on pressed powder pellets, microscopic observations on thin sections and stubs, and magnetic analysis were carried out. Various magnetic measurements are presented: the magnetic susceptibility measured at two different frequencies (0.47 and 4.7 kHz); the mass-specific susceptibility of ARM (χARM), expressed in m3/kg, calculated after mass-normalization and bias DC field correction; experiments for isothermal remanent magnetization (IRM) experimented were also conducted. The latter measurement allowed the calculation of additional parameters, such as the coercivity of remanence (B0cr) and the S-ratio [3]. The IRM acquired in a field of 1.0 T was regarded as the saturation IRM (SIRM). Mass-specific magnetic susceptibility (χ) was calculated by dividing the volume susceptibility by the sample mass. Finally, hysteresis loops and backfield curves at room temperature were measured on selected samples and are available. Data can be reused as groundwork information in future studies on MSWI residues. It would be essential to produce new data on geochemical and magnetic characteristics of MSWI residues to assure good coverage of data for enhanced sustainability of these heterogeneous streams of anthropogenic materials. This combination of methods will contribute to paving the way for quick and reliable resource assessment as well as to promote environmental sustainability.
RESUMEN
Municipal solid waste incineration (MSWI) is one of the leading technologies for municipal solid waste (MSW) treatment in Europe. Incineration bottom ash (IBA) is the main solid residue from MSWI, and its annual European production is about 20 million tons. The composition of IBA depends on the composition of the incinerated waste; therefore, it may contain significant amounts of ferrous and non-ferrous (NFe) metals as well as glass that can be recovered. Technologies for NFe metals recovery have emerged in IBA treatment since the 1990s and became common practice in many developed countries. Although the principles and used apparatus are nearly the same in all treatment trains, the differences in technological approaches to recovery of valuable components from IBA - with a special focus on NFe metals recovery - are summarized in this paper.
RESUMEN
Hydrocarbon seepage is overlooked in the marine environment, mostly due to the lack of high-resolution exploration data. This contribution is about the set-up of a relocatable and cost-effective monitoring system, which was tested on two seepages in the Central Adriatic Sea. The two case studies are an oil spill at a water depth of 10 m and scattered biogenic methane seeps at a water depth of 84 m. Gas plumes in the water column were detected with a multibeam system, tightened to sub-seafloor seismic reflection data. Dissolved benthic fluxes of nutrients, metals and Dissolved Inorganic Carbon (DIC) were measured by in situ deployment of a benthic chamber, which was used also for the first time to collect water samples for hydrocarbons characterization. In addition, the concentration of polycyclic aromatic hydrocarbons, as well as major and trace elements were analyzed to provide an estimate of hydrocarbon contamination in the surrounding sediment and to make further inferences on the petroleum system.
RESUMEN
Bioleaching (or microbial leaching) is a biohydrometallurgical technology that can be applied for metal recovery from anthropogenic waste streams. In particular, fly ashes and bottom ashes of municipal solid waste incineration (MSWI) can be used as a target material for biomining. Globally, approximately 46 million tonnes of MSWI ashes are produced annually. Currently landfilled or used as aggregate, these contain large amounts of marketable metals, equivalent to low-grade ores. There is opportunity to recover critical materials as the circular economy demands, using mesophile, moderately thermophile, and extremophile microorganisms for bioleaching. A Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis was developed to assess the potential of this biotechnology to recover critical metals from MSWI wastes. Bioleaching has potential as a sustainable technology for resource recovery and enhanced waste management. However, stakeholders can only reap the full benefits of bioleaching by addressing both the technical engineering challenges and regulatory requirements needed to realise and integrated approach to resource use.
Asunto(s)
Administración de Residuos , Ceniza del Carbón , Incineración , Metales Pesados , Eliminación de Residuos , Residuos SólidosRESUMEN
The continuous presence of toxic elements in the aquatic environments around mine tailings occurs due to bioleaching or chemical extraction promoted by the mining operations. Biogenic passivation treatment of tailings dams can be a new environment-friendly technique to inhibit the solubility of heavy metals. In spite of current bioleaching researches, we tried to minimize the mobility of the trace elements in the laboratory scale through the formation of a passivation layer in the presence of a mixed culture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. The X-ray diffraction (XRD) and scanning electron microscope (SEM) represented the jarosite generation as an inhibitory layer on the mineral surfaces of the tested materials. More detailed observations on electron probe micro-analyzer (EPMA) showed the co-precipitation of metals with the passivation layer. Thereby, the passivation layer demonstrates potential in elements immobilization which, in turn, can be optimized in the natural systems. Our working hypothesis was to exploit and optimize the formation of the passivation layer to maximize the immobilization of heavy metals (e.g., Cu, Cr). The optimization process of bioleaching experiments using indigenous bacteria caused a reduced solubility for Cu (from around 20% to 4.5%) and Cr (from around 30% to 10.6%) and the formation of 6.5 gr passivation layer. The analyses finally represented the high efficiency of the passivation technique to minimize metals bioleaching in comparison to earlier studies.
Asunto(s)
Metales Pesados/química , Minería , Sulfuros/química , Contaminantes Químicos del Agua/química , Acidithiobacillus , Acidithiobacillus thiooxidans , Bacterias , Biodegradación Ambiental , Compuestos Férricos , Metales Pesados/análisis , Minerales , Solubilidad , Sulfatos , Sulfuros/análisis , Contaminantes Químicos del Agua/análisisRESUMEN
Steel slag is a major by-product of the steel industry and a potential resource of technology critical elements. For this study, a basic oxygen furnace (BOF) steel slag was tested for bacterial leaching and recovery of aluminium (Al), chromium (Cr), and vanadium (V). Mixed acidophilic bacteria were adapted to the steel slag up to 5% (w/v). In the batch tests, Al, Cr, and V were bioleached significantly more from steel slag than in control treatments. No statistical difference was observed arising from the duration of the leaching (3 vs 6â¯d) in the batch tests. Al and Cr concentrations in the leachate were higher for the smaller particle size of the steel slag (<75⯵m), but no difference was observed for V. In the column tests, no statistical difference was found for pH, Al, Cr and V between the live culture (one-step bioleaching) and the supernatant (two-step bioleaching). The results show that the culture supernatant can be effectively used in an upscaled industrial application for metal recovery. If bioleaching is used in the 170-250 million tonnes of steel slag produced per year globally, significant recoveries of metals (100% of Al, 84% of Cr and 8% of V) can be achieved, depending on the slag composition. The removal and recovery percentages of metals from the leachate with Amberlite®IRA-400 are relatively modest (<67% and <5%, respectively), due to the high concentration of competing ions (SO42-, PO43-) in the culture medium. Other ion exchange resins can be better suited for the leachate or methods such as selective precipitation could improve the performance of the resin. Further research is needed to minimise interference and maximise metal recovery.
Asunto(s)
Aluminio/aislamiento & purificación , Cromo/aislamiento & purificación , Acero , Vanadio/aislamiento & purificación , Residuos Industriales , ReciclajeRESUMEN
Environmental policies in the European Union focus on the prevention of hazardous waste and aim to mitigate its impact on human health and ecosystems. However, progress is promoting a shift in perspective from environmental impacts to resource recovery. Municipal solid waste incineration (MSWI) has been increasing in developed countries, thus the amount of air pollution control residues (APCr) and fly ashes (FA) have followed the same upward trend. APCr from MSWI is classified as hazardous waste in the List of Waste (LoW) and as an absolute entry (19 01 07*), but FA may be classified as a mirror entry (19 0 13*/19 01 14). These properties arise mainly from their content in soluble salts, potentially toxic metals, trace organic pollutants and high pH in contact with water. Since these residues have been mostly disposed of in underground and landfills, other possibilities must be investigated to recover secondary raw materials and products. According to the literature, four additional routes of recovery have been found: detoxification (e.g. washing), product manufacturing (e.g. ceramic products and cement), practical applications (e.g. CO2 sequestration) and recovery of materials (e.g. Zn and salts). This work aims to identify the best available technologies for material recovery in order to avoid landfill solutions. Within this scope, six case studies are presented and discussed: recycling in lightweight aggregates, glass-ceramics, cement, recovery of zinc, rare metals and salts. Finally, future perspectives are provided to advance understanding of this anthropogenic waste as a source of resources, yet tied to safeguards for the environment.
RESUMEN
Osmium release from Municipal Solid Waste Incinerators (MSWI), even if acknowledged to occur at least over the last fifteen years, remains overlooked in the majority of recent studies. We present the osmium concentration and (187)Os/(188)Os isotopic measurements of different kinds of bottom and fly ash samples from MSWI plants and reference materials of incinerator fly ash (BCR176 and BCR176R). The analysis of the unknown ash samples shows a relatively wide range of (187)Os/(188)Os ratios (0.24-0.70) and Os concentrations (from 0.026 ng/g to 1.65 ng/g). Osmium concentrations and isotopic signatures differ from those of other known Os sources, either natural or manmade, suggesting a mixture of both contributions in the MSWI feedstock material. Furthermore, the comparison between the BCR176 and the renewed BCR176R indicates a decrease in Os concentration of one order of magnitude over the years (from 1 to 0.1 ng/g) due to improved recycling efficiency of Os-bearing waste. The estimated annual amount of Os from a typical incinerator (using average Os values and MSWI mass balance) is 13.4 g/a. The osmium potentially released from MSWI smokestacks is predicted to be from 16 to 38 ng Os/m(2)/a, considering a medium size country having 50 MSWI facilities; therefore much higher than the naturally transported osmium from continental dust in the atmosphere (about 1 pg Os/m(2)/a). MSWI systems are considered one of the best options for municipal solid waste management in industrialised countries, but their contribution to the Os budget can be significant.
RESUMEN
Bottom and fly ashes from Municipal Solid Waste Incinerators (MSWI) are hazardous products that present concern for their safe management. An attractive option to reduce their impact both on the environment and the financial commitment is turning MSWI ashes into secondary raw materials. In this study we present the REE content and distribution of bottom and fly ashes from MSWI after a highly effective digestion method and samples analysis by ICP-MS. The chondrite-normalised REE patterns of MSWI bottom and fly ash are comparable with that of crustal averages, suggesting a main geogenic source. Deviations from typical crustal pattern (e.g., Eu, Tb) disclose a contribution of likely anthropogenic provenance. The correlation with major elements indicates possible sources for REE and facilitates a preliminary resource assessment. Moreover, magnetic susceptibility measurements can be a useful prospecting method in urban ores made of MSWI ashes. The relationship between REE and some influencing parameters (e.g., Pricing Influence Factor) emphasises the importance of MSWI ash as alternative source of REE and the need of further efforts for REE recovery and purification from low concentrations but high flows waste.
RESUMEN
The incineration of municipal solid wastes is an important part of the waste management system along with recycling and waste disposal, and the solid residues produced after the thermal process have received attention for environmental concerns and the recovery of valuable metals. This study focuses on the Critical Raw Materials (CRM) content in solid residues from two Italian municipal waste incinerator (MSWI) plants. We sampled untreated bottom ash and fly ash residues, i.e. the two main outputs of common grate-furnace incinerators, and determined their total elemental composition with sensitive analytical techniques such as XRF and ICP-MS. After the removal of a few coarse metallic objects from bottom ashes, the corresponding ICP solutions were obtained using strong digestion methods, to ensure the dissolution of the most refractory components that could host significant amounts of precious metals and CRM. The integration of accurate chemical data with a substance flow analysis, which takes into account the mass balance and uncertainties assessment, indicates that bottom and fly ashes can be considered as a low concentration stream of precious and high-tech metals. The magnesium, copper, antimony and zinc contents are close to the corresponding values of a low-grade ore. The distribution of the elements flow between bottom and fly ash, and within different grain size fractions of bottom ash, is appraised. Most elements are enriched in the bottom ash flow, especially in the fine grained fractions. However, the calculated transfer coefficients indicate that Sb and Zn strongly partition into the fly ashes. The comparison with available studies indicates that the CRM concentrations in the untreated solid residues are comparable with those residues that undergo post-treatment beneficiations, e.g. separation between ferrous and non-ferrous fractions. The suggested separate collection of "fresh" bottom ash, which could be processed for further mineral upgrading, can constitute an attractive option of the waste management system, when physical-mechanical devices are not available or could not be implemented in old MSWI systems. The suggested procedure may lead to the improvement of recovery efficiency up to 83% for CRM and 94% for other valuable metals.