Hollow micro and nanostructures for therapeutic and imaging applications.

Hollow particles have been extensively used in bioanalytical and biomedical applications for almost two decades due to their unique and tunable optoelectronic properties as well as their significantly high loading capacities. These intrinsic properties led them to be used in various bioimaging applications as contrast agents, controlled delivery (i.e. drugs, nucleic acids and other biomolecules) platforms and photon-triggered therapies (e.g. photothermal and photodynamic therapies). Since recent studies showed that imaging-guided targeted therapeutics have higher success rates, multimodal theranostic platforms (combination of one or more therapy and diagnosis modality) have been employed more often and hollow particles (i.e. nanoshells) have been one of the most efficient candidates to be used in multiple-purpose platforms, owing to their intrinsic properties that enable synergistic multimodal performance. In this review, recent advances in the applications of such hollow particles fabricated with various routes (either inorganic or organic based) were summarized to delineate strategies for tuning their properties for more efficient biomedical performance by overcoming common biological barriers. This review will pave the ways for expedited progress in design of next generation of hollow particles for clinical applications.

Templated fabrication of periodic arrays of metallic and silicon nanorings with complex nanostructures.

Here we report a scalable colloidal templating approach for fabricating periodic arrays of metallic and silicon nanorings with complex nanostructures. Non-close-packed monolayer silica colloidal crystal prepared by a simple spin-coating technology is first used as template for making periodic arrays of mushroom-like composite nanostructures consisting of silica spherical caps and polymer stems. Subsequent metal sputtering and reactive ion etching lead to the formation of ordered asymmetric nickel nanorings which can be further utilized as etching masks for patterning periodic arrays of symmetric silicon nanorings. Moreover, periodic arrays of metallic and silicon concentric double nanorings can be fabricated by using the asymmetric nickel nanorings as templates. We have also demonstrated that gold concentric double nanorings show strong surface-enhanced Raman scattering (SERS) with a SERS enhancement factor of ∼9.5 × 10(7) from adsorbed benzenethiol molecules. The SERS enhancement and the electric field amplitude distribution surrounding gold concentric double nanorings have been calculated by using finite element electromagnetic modeling. This new colloidal templating technique is compatible with standard microfabrication and enables wafer-scale production of a variety of periodic nanorings with hierarchical structures that could find important technological applications in plasmonic and magnetic devices.

Periodic arrays of metal nanorings and nanocrescents fabricated by a scalable colloidal templating approach.

Here, we report a scalable bottom-up approach for fabricating periodic arrays of metal nanorings and nanocrescents. Wafer-scale monolayer silica colloidal crystals with an unusual non-close-packed structure prepared by a simple and rapid spin-coating technology are used as both etching and shadowing masks to create nanoring-shaped trenches in between templated polymer posts and sacrificial nanoholes. Directional deposition of metals in the trenches followed by liftoff of the polymer posts and the sacrificial nanoholes results in forming ordered metal nanorings. The inner and outer radii of the final nanorings are determined by the sizes of the templated polymer posts and the silica microspheres which can be easily adjusted by tuning the spin-coating and templating conditions. Most importantly, by simply controlling the tilt angle of the substrate toward the directional metal beams, continuous geometric transition from concentric nanorings to eccentric nanorings to nanocrescents can be achieved. This new colloidal templating approach is compatible with standard semiconductor microfabrication, promising for mass-production and on-chip integration of periodic nanorings and nanocrescents for a wide spectrum of technological applications ranging from nanooptical devices and ultrasensitive biosensing to magnetic memories and logic circuits.

Generalized fabrication of monolayer nonclose-packed colloidal crystals with tunable lattice spacing.

Here, we report a simple colloidal transfer technology that enables scalable fabrication of monolayer nonclose-packed silica colloidal crystals on a large variety of substrates. Two-dimensional colloidal crystals with an unusual nonclose-packed structure are first assembled on silicon wafers by a spin-coating technique. A poly(vinyl alcohol) (PVA) film cast upon the spin-coated colloidal crystal is used to transfer the nonclose-packed particle arrays onto various substrates. The lattice spacing of the transferred monolayer colloidal crystal can easily be adjusted by thermally treating the PVA-silica spheres composite film for varied durations. We also have demonstrated the templating fabrication of periodic arrays of gold nanodots using a transferred monolayer nonclose-packed colloidal crystal as a structural template. The resultant plasmonic array exhibits high surface-enhanced Raman scattering enhancement factor (~3.8 × 10(7)) for adsorbed benzenethiol molecules.

Equilibrium and kinetics studies for adsorption of direct blue 71 from aqueous solution by wheat shells.

This paper deals with the application of wheat shells (WS), an agricultural by-product, for the removal of direct blue 71 (DR) from aqueous solution. The characteristics of WS surface, such as surface area, Bohem titration and scanning electron microscopy (SEM) were obtained. The removal of direct blue 71 onto WS from aqueous solution was investigated by using parameters, such as pH, temperature, adsorbent dose, contact time and initial concentration. The adsorption process attains equilibrium within 36 h. The extent of dye removal decreased with increasing adsorbent dosage and also increased with increasing contact time, temperature, in solution concentration. Optimum pH value for dye adsorption was determined between 6 and 8. The experimental data were analysed by the Langmuir and Freundlich models of adsorption. It was found that the Langmuir equation fit better than the Freundlich equation. Maximum adsorption capacity (Q(m)) was calculated as at different temperatures (293, 303 and 313 K) 40.82, 45.66 and 46.30 mgg(-1), respectively. In addition, the adsorption data obtained at different temperatures of DR by WS were applied to pseudo first-order, pseudo second-order and Weber-Morris equations, and the rate constants of first-order adsorption (k(1)), the rate constants of second-order adsorption (k(2)) and intraparticle diffusion rate constants (k(3)) at these temperatures were calculated, respectively. The rates of adsorption were found to conform to pseudo second-order kinetics with good correlation (R(2)>or=0.9904). Also, free energy of adsorption (DeltaG degrees), enthalpy (DeltaH degrees), and entropy (DeltaS degrees) changes were determined to predict the nature of adsorption. Furthermore, the results indicate that WS could be employed as a low-cost alternative to other adsorbents in the removal of direct blue 71 from aqueous solution.