Evaluation of Different Procedures for Titanium Dental Implant Surface Decontamination-In Vitro Study.

Polymicrobial biofilm removal and decontamination of the implant surface is the most important goal in the treatment of periimplantitis. The aim of this study is to evaluate the efficacy of four different decontamination methods for removing Acinetobacter baumannii and Staphylococcus aureus biofilms in vitro. Seventy-five dental implants were contaminated with a bacterial suspension and randomly divided into five groups (n = 15): the negative control group, which received no treatment; the positive control group, treated with 0.2% chlorhexidine; group 1, treated with a chitosan brush (Labrida BioCleanTM, Labrida AS, Oslo, Norway); group 2, treated with a chitosan brush and 0.2% chlorhexidine; and group 3, treated with a device based on the electrolytic cleaning method (GalvoSurge, GalvoSurge Dental AG, Widnau, Switzerland). The colony-forming unit (CFU) count was used to assess the number of viable bacteria in each sample, and statistical analyses were performed. When compared to the negative control group, all the decontamination methods reduced the CFU count. The electrolytic cleaning method decontaminated the implant surface more effectively than the other three procedures, while the chitosan brush was the least effective. Further research in more realistic settings is required to assess the efficacy of the decontamination procedures described in this study.

Comparison of Three Different Orthodontic Adhesives Bonded to Metallic and Ceramic Brackets: SEM and SEM/EDX Analysis (In Vitro Study).

Objectives: To compare three different orthodontic adhesives (Transbond XT Light Cure Adhesive, Heliosit Orthodontic, Fuji Ortho LC) bonded to two types of orthodontic brackets: ceramic brackets (Fascination Roth 0.22) and metallic brackets (Topic Roth 0.22, Dentaurum). Materials and methods: The study was performed on 18 human teeth (6 for each adhesive). The prepared teeth were divided into three groups according to the examination time. Subsequently, they were observed after 1, 2 and 3 weeks following bonding. After the experimental procedure, the teeth samples were cut in half along the longitudinal axis in the vestibulo-oral direction, fixed with conductive carbon cement, placed in a high-vacuum evaporator and then coated with carbon. One half of each sample was observed under a Field-emission gun scanning electron microscope (FEG-SEM Hitachi SU 8030, Japan), while on the second half of the samples qualitative (X-ray line-scans) and semi-quantitative point X-ray energy dispersive analyses (EDX) were performed with Thermo Noran (USA) NSS System 7, equipped with Ultra Dry detector (30 mm2 window). Results: Transbond XT had an ideal bond with the enamel and the bracket base, with rare presence of microgaps and cracks in the enamel. Heliosit Orthodontic demonstrated a better bond relationship with the bracket base than the enamel, whereas in the latter the presence of microgaps in the bond was observed. The microphotographs of Fuji Ortho LC demonstrated many cracks inside the adhesive, and some of them continued to move forward into the enamel surface. Therefore, an impression of a very solid bond relationship with the enamel exists, with cracks being present in the enamel surface and never at the enamel-adhesive interface. Microgaps also appeared at the bracket-adhesive interface. Conclusion: Transbond XT is a highly filled composite resin and is an ideal orthodontic adhesive in each aspect examined, with an ideal enamel-adhesive and bracket-adhesive interface. Heliosit Orthodontic provides better bracket-adhesive interface compared to the enamel. Fuji Ortho LC as a solid resin-modified GIC provides a better enamel-adhesive interface, compared to the bracket base.

Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold-In Vitro Pilot Study.

The alveolar ridge reconstruction of vertical and combined bone defects is a non-predictable procedure with varying percentages of success. The greatest challenge for vertical and combined bone augmentation is to maintain mechanical stability of the bone graft; therefore, it is mandatory to provide and preserve space for bone regeneration. The development of biomaterials and 3D printing has enabled the use of polymer scaffolds in the reconstruction of alveolar ridge defects. The aim of this pilot study was to evaluate the mechanical characteristics of an innovative individualized biodegradable polylactic acid (PLA) scaffold, under dynamic conditions, simulating biodegradation and the influence of masticatory forces. After the design and 3D printing of PLA scaffolds, two groups of 27 scaffolds were formed according to the compression testing procedure. The compression tests were performed in occlusal and lateral directions. In each of the two groups, nine subgroups of three scaffolds were formed for different testing periods during in vitro degradation with a total period of 16 weeks. Results showed that biodegradation and load application had no significant influence on mechanical characteristics of tested scaffolds. It can be concluded that simulated masticatory forces and biodegradation do not significantly influence the mechanical characteristics of an individualized biodegradable augmentation scaffold.

Effect of sodium hypochlorite and ethylenediaminotetraacetic acid activated by laser and ultrasonic energy on surface morphology and chemical composition of intracanal dentin.

The aim of the study was to evaluate the structural and chemical changes in intracanal dentin after root canal irrigation with sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA) using additional activation with a novel Er:YAG Shock Wave-Enhanced Emission Photoacoustic Streaming (SWEEPS), ultrasonic irrigation (UI), and Nd:YAG irradiation. Root canals of extracted human premolars were instrumented with distilled water and distributed into groups according to the irrigation protocol used: Group 1: conventional needle irrigation (CI) with 3% NaOCl; group 2: CI with 15% EDTA; and group 3: CI with NaOCl+EDTA. In group 4, root canals were irrigated with NaOCl+EDTA+NaOCl using the following techniques: CI (group 4A), SWEEPS (group 4B), UI (group 4C). In group 4D, root canals were finally irradiated with Nd:YAG laser. After the irrigation, the intracanal dentin sample was collected and analyzed using spectroscope with a Fourier transformation of infrared spectrum in Attenuated total reflection technique (FTIR-ATR) to calculate apatite/collagen ratio. Scanning electron microscopy (SEM) and energy dispersive x-ray spectrometry (EDS) were used to determine its chemical composition. FTIR-ATR showed no significant difference in the phosphate/amid I ratio between the control and the experimental groups (p > 0.05). SWEEPS and UI of NaOCl+EDTA+NaOCl caused the most pronounced decrease of Ca and P (p < 0.05) value compared to CI and control group, and canal wall erosion. SWEEPS and UI of NaOCl+EDTA+NaOCl caused the most pronounced decrease of Ca and P value and significant canal wall erosion. However, no difference in phosphate/amide ratio was reported among groups. RESEARCH HIGHLIGHTS: SWEEPS and UI of NaOCl+EDTA+NaOCl caused the most pronounced decrease of Ca and P values and significant canal wall erosion. There was no difference in phosphate/amide ratio among the irrigation protocols.

Detection and Segmentation of Radiolucent Lesions in the Lower Jaw on Panoramic Radiographs Using Deep Neural Networks.

Background and Objectives: The purpose of this study was to develop and evaluate a deep learning model capable of autonomously detecting and segmenting radiolucent lesions in the lower jaw by utilizing You Only Look Once (YOLO) v8. Materials and Methods: This study involved the analysis of 226 lesions present in panoramic radiographs captured between 2013 and 2023 at the Clinical Hospital Dubrava and the School of Dental Medicine, University of Zagreb. Panoramic radiographs included radiolucent lesions such as radicular cysts, ameloblastomas, odontogenic keratocysts (OKC), dentigerous cysts and residual cysts. To enhance the database, we applied techniques such as translation, scaling, rotation, horizontal flipping and mosaic effects. We have employed the deep neural network to tackle our detection and segmentation objectives. Also, to improve our model's generalization capabilities, we conducted five-fold cross-validation. The assessment of the model's performance was carried out through metrics like Intersection over Union (IoU), precision, recall and mean average precision (mAP)@50 and mAP@50-95. Results: In the detection task, the precision, recall, mAP@50 and mAP@50-95 scores without augmentation were recorded at 91.8%, 57.1%, 75.8% and 47.3%, while, with augmentation, were 95.2%, 94.4%, 97.5% and 68.7%, respectively. Similarly, in the segmentation task, the precision, recall, mAP@50 and mAP@50-95 values achieved without augmentation were 76%, 75.5%, 75.1% and 48.3%, respectively. Augmentation techniques led to an improvement of these scores to 100%, 94.5%, 96.6% and 72.2%. Conclusions: Our study confirmed that the model developed using the advanced YOLOv8 has the remarkable capability to automatically detect and segment radiolucent lesions in the mandible. With its continual evolution and integration into various medical fields, the deep learning model holds the potential to revolutionize patient care.

Pink Esthetic Score Around Single-Tooth Implant Crowns After Socket-Shield Technique: A Prospective Cohort Study.

Esthetics is important for any dental implant but crucial for implants in the anterior region. Restorations in this region are demanding, and the goal of re-establishing an attractive smile without revealing differences from the natural teeth is difficult to achieve. The aim of this study was to examine the clinical success of the socket-shield technique regarding soft tissue stability and overall esthetic outcome. Pink esthetic scores (PESs) were collected at two time points (T1: 6 months; T2: 6 years) by three different specialists. This prospective cohort clinical study involved 30 patients (7 women and 23 men) with a mean age of 42.3 years. There were no significant differences in PES values assessed by the oral surgeon and prosthodontist (P > .05) at either of the assigned time points. The periodontist found differences in PES values between T1 and T2 (P < .05), but they were modest in value. Analyses of each individual variable at given time intervals revealed significant differences in the shape of the distal papillae (χ2 = 6.182; P < .05) and soft tissue margin level (χ2 = 6.507; P < .05). The final results suggest that the socket-shield technique is promising for implant placement in the esthetic zone.

Evaluation of the Photoactivation Effect of 3% Hydrogen Peroxide in the Disinfection of Dental Implants: In Vitro Study.

Photoactivation of 3% hydrogen peroxide with a 445 nm diode laser represents a relatively new, insufficiently researched antimicrobial method in the treatment of peri-implantitis. The purpose of this work is to evaluate the effect of photoactivation of 3% hydrogen peroxide with a 445 nm diode laser, and to compare the obtained results with 0.2% chlorhexidine treatment and 3% hydrogen peroxide treatment without photoactivation, in vitro, on the surface of dental implants contaminated with S. aureus and C. albicans biofilms. Previously, 80 infected titanium implants with S. aureus and C. albicans cultures were divided into four groups: G1-negative control (no treatment), G2-positive control (0.2% chlorhexidine), G3 (3% hydrogen peroxide), and G4 (photoactivated 3% hydrogen peroxide). The number of viable microbes in each sample was determined by the colony forming unit (CFU) count. The results were statistically processed and analyzed, showing a statistically significant difference across all groups compared to the negative control (G1), and the absence of a statistically significant difference between groups G1-G3. The new antimicrobial treatment, according to the results, could be worthy of further analysis and research.

Antimicrobial Efficacy and Permeability of Various Sealing Materials in Two Different Types of Implant-Abutment Connections.

The presence of a microgap along an implant-abutment connection (IAC) is considered the main disadvantage of two-piece implant systems. Its existence may lead to mechanical and biological complications. Different IAC designs have been developed to minimise microleakage through the microgap and to increase the stability of prosthodontic abutments. Furthermore, different sealing materials have appeared on the market to seal the gap at the IAC. The purpose of this study was to evaluate the antimicrobial efficacy and permeability of different materials designed to seal the microgap, and their behaviour in conical and straight types of internal IACs. One hundred dental implants with original prosthodontic abutments were divided into two groups of fifty implants according to the type of IAC. Three different sealing materials (GapSeal, Flow.sil, and Oxysafe gel) were applied in the test subgroups. The contamination of implant-abutment assemblies was performed by a joint suspension containing Candida albicans and Staphylococcus aureus. It was concluded that the IAC type had no significant influence on microleakage regarding microbial infection. No significant difference was found between the various sealing agents. Only one sealing agent (GapSeal) was found to significantly prevent microleakage. A complete hermetic seal was not achieved with any of the sealing agents tested in this study.

A Novel Technique for Disinfection Treatment of Contaminated Dental Implant Surface Using 0.1% Riboflavin and 445 nm Diode Laser-An In Vitro Study.

BACKGROUND: Antimicrobial photodynamic therapy (PDT) has been introduced as a potential option for peri-implantitis treatment. The aim of this study is to evaluate the antimicrobial effect of a novel technique involving a combination of 445 nm diode laser light with 0.1% riboflavin solution (used as a photosensitizing dye) as applied on a bacterial-fungal biofilm formed on implants and to compare the performance of this technique with that of the commonly used combination of 660 nm diode laser with 0.1% methylene blue dye. METHODS: An in vitro study was conducted on 80 titanium dental implants contaminated with Staphylococcus aureus (SA) and Candida albicans (CA) species. The implants were randomly divided into four groups: negative control (NC), without surface treatment; positive control (PC), treated with a 0.2% chlorhexidine (CHX)-based solution; PDT1, 660 nm (EasyTip 320 µm, 200 mW, Q power = 100 mW, 124.34 W/cm2, 1240 J/cm2) with a 0.1% methylene blue dye; and PDT2, 445 nm (EasyTip 320 µm, 200 mW, Q power = 100 mW, 100 Hz, 124.34 W/cm2, 1.24 J/cm2) with a 0.1% riboflavin dye. RESULTS: The PDT1 and PDT2 groups showed greater reduction of SA and CA in comparison to the NC group and no significant differences in comparison to the PC group. No statistically significant differences between the PDT1 and PDT2 groups were observed. CONCLUSIONS: A novel antimicrobial treatment involving a combination of 445 nm diode laser light with riboflavin solution showed efficiency in reducing SA and CA biofilm formation on dental implant surfaces comparable to those of the more commonly used PDT treatment consisting of 660 nm diode laser light with methylene blue dye or 0.2% CHX treatment.

Influence of titanium implant macrodesign on peri-implantitis occurrence: a cross-sectional study.

OBJECTIVES: To assess whether implant macrodesign parameters interacting with implant time in function (Tf) could influence the peri-implantitis occurrence. MATERIALS AND METHODS: One hundred and two patients (55.17 ± 11.2 years old) with diagnosed early/moderate peri-implantitis around endosseous implants with implant-supported prosthetics reconstruction (n = 139) were recruited. Implant macrodesign (implant shape, thread number, implant collar), clinical parameters (peri-implant probing depth (PPD), clinical attachment level (CAL), keratinised tissue width (KTW), plaque index, bleeding on probe), implant placement localisation and region, and Tf were assessed and compared. RESULTS: Peri-implantitis occurred approximately 6.1 ± 3.38 years after implant loading. There was a significant positive correlation between the implant macrodesign and Tf. Peri-implantitis rates were statistically significantly higher in implants with a cylindric shape and triple-thread in the posterior part of the mandible (p = 0.037 and 0.012, respectively). The thread number and implant shape interacting with Tf showed statistically significant influences on CAL and PPD increase (p < 0.05). Results indicated a statistically positive interaction between Tf and KTW decrease around the implants with microthreaded collar (p < 0.001). CONCLUSION: Peri-implantitis might be presented as a time-dependent disease. Implant-based factors, such as Tf and implant macrodesign, could influence peri-implantitis occurrence, exacerbate clinical parameters, and promote progressive bone loss. CLINICAL RELEVANCE: Peri-implantitis can be affected by implant macrodesign and Tf. The implant body shape, thread number, and design of the implant collar may be considered peri-implantitis-related risk indicators that should be taken into account in proper implant planning and therapy.

Sealing Efficacy of the Original and Third-Party Custom-Made Abutments-Microbiological In Vitro Pilot Study.

Implant-abutment connection (IAC) is a key factor for the long-term success and stability of implant-supported prosthodontic restoration and its surrounding tissues. Misfit between prosthodontic abutment and implant at the IAC leads to technical and biological complications. Two kinds of prosthodontic abutments are currently available on the market: original and third-party abutments. The aim of this pilot study was to test and compare the internal fit (gap) at the implant-abutment interface depending on the abutment fabrication method based on microbial leakage in static conditions and the need for the use of gap sealing material. Two groups of 40 implants were formed on the basis of the type of abutment. In each of the groups of two implant systems, two subgroups of 10 implants were formed. The tested subgroups consisted of 10 implants with sealing material and a negative control subgroups consisting of 10 implants without any sealing material. The test material, GapSeal (Hager and Werken, Duisburg, Germany) was applied in the test subgroups. The implant-abutment assemblies were contaminated with a solution containing Staphylococcus aureus and Candida albicans for 14 days under aerobic conditions. Results showed that there was no statistically significant difference regarding the microbial leakage between the original and third-party custom-made abutments, regardless of the use of sealing material. It can be concluded that the abutment fabrication method has no significant influence on sealing efficacy regarding the bacterial and fungal leakage in static conditions.

Mesenchymal Stem Cells Based Treatment in Dental Medicine: A Narrative Review.

Application of mesenchymal stem cells (MSC) in regenerative therapeutic procedures is becoming an increasingly important topic in medicine. Since the first isolation of dental tissue-derived MSC, there has been an intense investigation on the characteristics and potentials of these cells in regenerative dentistry. Their multidifferentiation potential, self-renewal capacity, and easy accessibility give them a key role in stem cell-based therapy. So far, several different dental stem cell types have been discovered and their potential usage is found in most of the major dental medicine branches. These cells are also researched in multiple fields of medicine for the treatment of degenerative and inflammatory diseases. In this review, we summarized dental MSC sources and analyzed their treatment modalities with particular emphasis on temporomandibular joint osteoarthritis (TMJ OA).

Atypical Peripheral Ossifying Fibroma of the Mandible.

Peripheral ossifying fibroma (POF) is a benign localized lesion originating from gingival and alveolar oral mucosa. Its origin can be cells of periodontal ligament. The lesions usually develop in women in their twenties. POF is a complex clinical and histological diagnosis due to its shared characteristics with many other conditions. In this paper, we presented a case of an atypical peripheral ossifying fibroma (POF) in the left lateral part of the mandible in a 70-year-old male patient who had two semicircular bridges supported on four implants in the upper and lower jaws. A review of CBCT and orthopedic imaging showed no visible intraosseous changes. Histological analysis revealed the diagnosis of POF. The case in question is interesting, as elaborated on in the discussion section of this paper because POF is usually found in female patients aged between 20 and 30 years.

Satisfaction of Parents and Caregivers with Dental Treatment of Children Under General Anesthesia in a Day Care Surgery Setting.

Objective: The aim of this study was to examine the satisfaction of parents and caregivers of patients who underwent dental treatment in general anesthesia (GA) in a day-care surgery setting. Material and Methods: Anonymous questionnaire was sent to parents/caregivers of patients who underwent full mouth restoration in GA. The survey consisted of 4 parts: general data, data about procedure, satisfaction with various aspects of care and the perception of parents/caregivers about the condition of their child in relation to the time before dental treatment in GA. Results: 66 parents/caregivers (30.5%) responded to the questionnaire. Overall satisfaction with the treatment was high (4.69). Respondents expressed the highest degree of satisfaction with communication with nurses (4.92), and the lowest with the waiting time for the procedure (3.89). Parents/caregivers of patients who reported difficulty eating expressed significantly lower overall satisfaction than the subjects whose children did not report difficulty eating. Also, the more treatments the patients underwent, the lower was the overall satisfaction than of those subjects whose children were never treated in such a manner before. Conclusions: Since patient satisfaction has a beneficial impact on treatment outcome and adherence to preventive recommendations, all health care providers should strive to achieve it.

Effect of a novel laser-initiated photoacoustic activation of a solvent or sodium hypochlorite in the removal of filling remnants after retreatment of curved root canals.

BACKGROUND: This study aimed to evaluate the effect of Er:YAG laser-initiated shockwave-enhanced emission of photoacoustic streaming (SWEEPS®) and passive ultrasonic irrigation (PUI) combining thymol-based solvent or sodium hypochlorite (NaOCl) in the removal of filling remnants from curved canals. METHODS: Forty-eight curved root canals were instrumented and filled with an epoxy-resin-based sealer and gutta-percha. The canals were retreated with a Wave One Gold primary file (tip size 25; variable taper) and sodium hypochlorite (NaOCl). After the retreatment, the samples were randomly divided into four groups according to the additional irrigation protocol: PUI/NaOCl, PUI/solvent, SWEEPS®/NaOCl or SWEEPS®/solvent. The volume of filling material in root canal was measured after root canal filling, after mechanical retreatment, after final irrigation protocol and after additional irrigation protocol, using micro-CT. The results were analyzed using Kruskal-Wallis test with the post-hoc Mann-Whitney U test and Wilcoxon test (α=0.05). RESULTS: In the PUI group, irrigation with the solvent or NaOCl resulted in similar filling reduction (p = 0.224). In the SWEEPS® group, irrigation with NaOCl resulted in a significantly greater filling reduction compared to the solvent (p = 0.021). The SWEEPS®/NaOCl group was more effective than the PUI/NaOCl group (p = 0.008). No significant differences were found between PUI/solvent and SWEEPS® groups (p>0.05) and PUI/NaOCl and SWEEPS®/solvent group (p>0.05). CONCLUSION: Although all tested protocols improved the removal of filling remnants from curved root canal, the SWEEPS® was more successful than PUI when NaOCl was used. Both tested techniques showed similar efficacy when in combination with the solvent.

Evaluation of Efficiency of Polymerization, Surface Roughness, Porosity and Adaptation of Flowable and Sculptable Bulk Fill Composite Resins.

A new category of commercial bulk fill composite resins (CRs) enables the placement of 4-mm-thick layers as an alternative to the traditional time-consuming incremental technique. The purpose of the present study was to compare the efficiency of the polymerization, adaptation and porosity of two high-viscosity 'sculptable' bulk fill CRs (Filtek™ Bulk Fill (3M™ ESPE, St. Paul, MN, USA) and Tetric EvoCeram® Bulk Fill (Ivoclar Vivadent AG, Schwan, Liechtenstein)) and two low-viscosity 'flowable' bulk fill CRs (SureFil® SDR™ flow (Dentsply Sirona, Charlotte, NC, USA) and Tetric EvoFlow® Bulk Fill (Ivoclar Vivadent AG, Schaan, Liechtenstein)). Cylindrical samples of the bulk fill CRs (4 mm height × 10 mm diameter) were analyzed by Fourier-transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM). Additionally, occlusal cavities were prepared in twelve extracted human molars and restored with the bulk fill CRs (n = 3 for each CR). The adaptation and porosity of the bulk fill CRs were evaluated by X-ray microcomputed tomography (µCT) with a 3D morphometric analysis, and the adaptation was also analyzed by scanning electron microscopy (SEM) on longitudinal vestibulo-oral sections of the restored teeth. The AFM analysis demonstrated that the surface roughness of the SureFil® SDR™ flow was higher than that of the Tetric EvoFlow® Bulk Fill and that the surface roughness of Filtek™ Bulk Fill was higher than that of Tetric EvoCeram® Bulk Fill. µCT and SEM confirmed that the flowable bulk fill CRs had excellent adaptation to the cavity walls. The 3D morphometric analysis showed the highest and lowest degrees of porosity in Filtek™ Bulk Fill and Tetric EvoFlow® Bulk Fill, respectively. In general, the flowable bulk fill CRs exhibited better adaptation, a higher efficiency of polymerization and lower porosity than the sculptable materials.

Guided Bilateral Transcanine Implant Placement and Implant-Supported Oral Rehabilitation in a Patient with Progressive Systemic Scleroderma.

When faced with a situation where an impacted tooth is in the way of a planned implant, one approach to avoid an invasive surgical procedure and potential associated complications is to place a transcanine implant. The aim of this report was to add a new case of a transimpacted tooth dental implant placement to the existing international literature and to share our experience of transcanine implantation in the maxilla followed by implant prosthodontic rehabilitation of a patient with progressive systemic scleroderma. A 55-year-old woman attended our office for oral cavity assessment and treatment planning for complete oral rehabilitation. Digital planning software was used, and implants were positioned according to a surgical template in regions 13, 16, 23, and 26 (Straumann, Basel, Switzerland) with screw-retained metal-ceramic bridges. Placement of the dental implants through impacted canines and the creation of interfaces other than implant-bone interfaces did not lead to postoperative pain or implant failure. Clinically, overall healing was observed, and the implants were successfully used for implant-supported prosthodontic rehabilitation of the jaw. Within the limitations of this case report, transcanine implantation could represent a valuable alternative to standard implant protocols.

Extremely Rare Intraoral Presentation of Localized Amyloidosis.

PURPOSE: To present an extremely rare case of localized amyloidosis of the mucosa of the maxillary alveolar ridge. Case Report. A 71-year-old man was referred to the Department of Oral Surgery, School of Dental Medicine, University of Zagreb, for a persistent nodular formation in the edentulous ridge of the anterior maxillary region. The nodular formation had a reddish color, solid consistency, and an approximate size of 40 × 15 mm. Orthopantomographic imaging excluded bone resorption and defects. Histopathological assessments of the biopsy specimen showed that the stroma was occupied by a multiplied, partially hyalinized connective tissue. The samples were subsequently stained with Congo red, and collagen accumulation under polarized light showed an apple-green birefringence indicating amyloid. Subsequently, the nodular formation was completely excised and a maxillary total denture was made. The patient showed normal tissue healing with no sign of recurrence at a follow-up assessment 1.5 years after the procedure. CONCLUSION: This is only the third reported case of localized amyloidosis of the alveolar ridge mucosa. Histopathological analysis is the first step for diagnosis, but systemic tests, blood counts, urinalysis, bone marrow biopsy, electrocardiography, and digestive endoscopy are recommended to rule out a systemic disease.

Thermal Evaluation by Infrared Thermography Measurement of Osteotomies Performed with Er:YAG Laser, Piezosurgery and Surgical Drill-An Animal Study.

The bone healing process following osteotomy may vary according to the type of surgical instrumentation. The aim of the present in vivo study was to determine thermal changes of the bone tissue following osteotomies performed by Er:YAG laser ablation in contact and non-contact modes, piezoelectric surgery, and surgical drill using an infrared thermographic camera. For each measurement, the temperature before the osteotomy-baseline (Tbase) and the maximal temperature measured during osteotomy (Tmax) were determined. Mean temperature (ΔT) values were calculated for each osteotomy technique. The significance of the difference of the registered temperature between groups was assessed by the ANOVA test for repeated measures. Mean baseline temperature (Tbase) was 27.9 ± 0.3 °C for contact Er:YAG laser, 29.9 ± 0.3 °C for non-contact Er:YAG laser, 29.4 ± 0.3 °C for piezosurgery, and 28.3 ± 0.3 °C for surgical drill. Mean maximum temperature (Tmax) was 29.9 ± 0.5 °C (ΔT = 1.9 ± 0.3 °C) for contact Er:YAG laser, 79.1 ± 4.6 °C (ΔT = 49.1 ± 4.4 °C) for non-contact Er:YAG laser, 29.1 ± 0.2 °C (ΔT = -0.2 ± 0.3 °C) for piezosurgery, and 27.3 ± 0.4 °C (ΔT = -0.9 ± 0.4 °C) for surgical drill. Statistically significant temperature changes were observed for the non-contact laser. The results of the study showed beneficial effects of the osteotomy performed by the Er:YAG laser used in the contact mode of working as well as for piezosurgery, reducing the potential overheating of the bone tissue as determined by means of infrared thermography.