Extending the Palette of Luminescent Primary Thermometers: Yb3+/Pr3+ Co-Doped Fluoride Phosphate Glasses.

The unique tunable properties of glasses make them versatile materials for developing numerous state-of-the-art optical technologies. To design new optical glasses with tailored properties, an extensive understanding of the intricate correlation between their chemical composition and physical properties is mandatory. By harnessing this knowledge, the full potential of vitreous matrices can be unlocked, driving advancements in the field of optical sensors. We herein demonstrate the feasibility of using fluoride phosphate glasses co-doped with trivalent praseodymium (Pr3+) and ytterbium (Yb3+) ions for temperature sensing over a broad range of temperatures. These glasses possess high chemical and thermal stability, working as luminescent primary thermometers that rely on the thermally coupled levels of Pr3+ that eliminate the need for recurring calibration procedures. The prepared glasses exhibit a relative thermal sensitivity and uncertainty at a temperature of 1.0% K-1 and 0.5 K, respectively, making them highly competitive with the existing luminescent thermometers. Our findings highlight that Pr3+-containing materials are promising for developing cost-effective and accurate temperature probes, taking advantage of the unique versatility of these vitreous matrices to design the next generation of photonic technologies.

3D Printing of Macro Porous Sol-Gel Derived Bioactive Glass Scaffolds and Assessment of Biological Response.

3D printing emerged as a potential game-changer in the field of biomedical engineering. Robocasting in particular has shown excellent capability to produce custom-sized porous scaffolds from pastes with suitable viscoelastic properties. The materials and respective processing methods developed so far still need further improvements in order to obtain completely satisfactory scaffolds capable of providing both the biological and mechanical properties required for successful and comprehensive bone tissue regeneration. This work reports on the sol-gel synthesis of an alkali-free bioactive glass and on its characterization and processing ability towards the fabrication of porous scaffolds by robocasting. A two-fold increase in milling efficiency was achieved by suitably adjusting the milling procedures. The heat treatment temperature exerted a profound effect on the surface area of mesoporous powders. Robocasting inks containing 35 vol.% solids were prepared, and their flow properties were characterized by rheological tests. A script capable of preparing customizable CAD scaffold geometries was developed. The printing process was adjusted to increase the technique's resolution. The mechanical properties of the scaffolds were assessed through compressive strength tests. The biomineralization ability and the biological performance were assessed by immersing the samples in simulated body fluid (SBF) and through MTT assays, respectively. The overall results demonstrated that scaffolds with macro porous features suitable for bone ingrowth (pore sizes of ~340 µm after sintering, and a porosity fraction of ~70%) in non-load-bearing applications could be successfully fabricated by 3D printing from the bioactive glass inks. Moreover, the scaffolds exhibited good biomineralization activity and good biocompatibility with human keratinocytes, suggesting they are safe and thus suited for the intended biomedical applications.

Ionic Conductivity of Na3Al2P3O12 Glass Electrolytes-Role of Charge Compensators.

In glasses, a sodium ion (Na+) is a significant mobile cation that takes up a dual role, that is, as a charge compensator and also as a network modifier. As a network modifier, Na+ cations modify the structural distributions and create nonbridging oxygens. As a charge compensator, Na+ cations provide imbalanced charge for oxygen that is linked between two network-forming tetrahedra. However, the factors controlling the mobility of Na+ ions in glasses, which in turn affects the ionic conductivity, remain unclear. In the current work, using high-fidelity experiments and atomistic simulations, we demonstrate that the ionic conductivity of the Na3Al2P3O12 (Si0) glass material is dependent not only on the concentration of Na+ charge carriers but also on the number of charge-compensated oxygens within its first coordination sphere. To investigate, we chose a series of glasses formulated by the substitution of Si for P in Si0 glass based on the hypothesis that Si substitution in the presence of Na+ cations increases the number of Si-O-Al bonds, which enhances the role of Na as a charge compensator. The structural and conductivity properties of bulk glass materials are evaluated by molecular dynamics (MD) simulations, magic angle spinning-nuclear magnetic resonance, Raman spectroscopy, and impedance spectroscopy. We observe that the increasing number of charge-imbalanced bridging oxygens (BOs) with the substitution of Si for P in Si0 glass enhances the ionic conductivity by an order of magnitude-from 3.7 × 10-8 S.cm-1 to 3.3 × 10-7 S.cm-1 at 100 °C. By rigorously quantifying the channel regions in the glass structure, using MD simulations, we demonstrate that the enhanced ionic conductivity can be attributed to the increased connectivity of Na-rich channels because of the increased charge-compensated BOs around the Na atoms. Overall, this study provides new insights for designing next-generation glass-based electrolytes with superior ionic conductivity for Na-ion batteries.

Sol-Gel Synthesis and Characterization of a Quaternary Bioglass for Bone Regeneration and Tissue Engineering.

Sol-gel synthesis using inorganic and/or organic precursors that undergo hydrolysis and condensation at room temperature is a very attractive and less energetic method for preparing bioactive glass (BG) compositions, as an alternative to the melt-quenching process. When properly conducted, sol-gel synthesis might result in amorphous structures, with all of the components intimately mixed at the atomic scale. Moreover, developing new and better performing materials for bone tissue engineering is a growing concern, as the aging of the world's population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2-34 CaO-4 MgO-2 P2O5 (mol%), which was prepared using acidified distilled water as a single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The XRD results of samples calcined within the temperature range of 600-900 °C demonstrated that the amorphous nature was maintained until 800 °C, followed by partial crystallization at 900 °C. The specific surface area-an important factor in osteoconduction-was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 °C to 2.2 ± 0.1 m2/g at 900 °C, accompanied by consistent changes in average pore size and pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate that the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

Elucidating the formation of Al-NBO bonds, Al-O-Al linkages and clusters in alkaline-earth aluminosilicate glasses based on molecular dynamics simulations.

Exploring the reasons for the initiation of Al-O-Al bond formation in alkali-earth alumino silicate glasses is a key topic in the glass-science community. Evidence for the formation of Al-O-Al and Al-NBO bonds in the glass composition 38.7CaO-9.7MgO-12.9Al2O3-38.7SiO2 (CMAS, mol%) has been provided based on Molecular Dynamics (MD) simulations. Analyses in the short-range order confirm that silicon and the majority of aluminium cations form regular tetrahedra. Well-separated homonuclear (Si-O-Si) and heteronuclear (Si-O-Al) cluster regions have been identified. In addition, a channel region (C-Region), separated from the network region, enriched with both NBO and non-framework modifier cations, has also been identified. These findings are in support of the previously proposed extended modified random network (EMRN) model for aluminosilicate glasses. A detailed analysis of the structural distributions revealed that a majority of Al, 51.6%, is found in Si-O-Al links. Although the formation of Al-O-Al and Al-NBO bonds is energetically less favourable, a significant amount of Al is found in Al-O-Al links (33.5%), violating Lowenstein's rule, and the remainder is bonded with non-bridging oxygen (NBO) in the form of Al-NBO (Al-O-(Ca, Mg)). The conditions necessary for the formation of less favourable bonds are attributed to the presence of a high amount of modifier cations in current CMAS glass and their preferable coordination.

Structure and Stability of High CaO- and P2O5-Containing Silicate and Borosilicate Bioactive Glasses.

The present work elucidates about the structure of bioactive glasses having chemical compositions expressed as (mol %) (50.0 - x)SiO2-xB2O3-9.3Na2O-37CaO-3.7P2O5, where x = 0.0, 12.5, 25, and 37.5, and establishes a correlation between the structure and thermal stability. The structural modifications in the parent boron-free glass (B0) with the gradual substitutions of B2O3 for SiO2 are assessed by Raman and 29Si, 31P, 11B, and 23Na magic angle spinning (MAS)-nuclear magnetic resonance (NMR) spectroscopies. The structural studies reveal the presence of QSi2 and QSi3 structural units in both silicate and borosilicate glasses. However, QSi4(3B) units additionally form upon incorporating B2O3 in B0 glass. B-containing silicate glasses exhibit both three-coordinated boron (BIII) and four-coordinated boron (BIV) units. The 31P MAS-NMR studies reveal that the majority of phosphate species exist as isolated orthophosphate (QP0) units. The incorporation of B2O3 in B0 glass increases the cross-linking between the SiO4 and BO4 structural units. However, incorporation of B2O3 lowers the glass thermal stability (ΔT), as shown by differential scanning calorimetry. Although both silicate and borosilicate glasses exhibit good in vitro apatite-forming ability and cell compatibility, the bactericidal action against Escherichia coli bacteria is more evident in borosilicate glass in comparison to silicate base glass. The controlled release of (BO3)3- ions from boron-modified bioactive glasses improves both the cell proliferation and the antibacterial properties, making them promising for hard tissue engineering applications.

Bioactive Glasses and Glass-Ceramics for Healthcare Applications in Bone Regeneration and Tissue Engineering.

The discovery of bioactive glasses (BGs) in the late 1960s by Larry Hench et al. was driven by the need for implant materials with an ability to bond to living tissues, which were intended to replace inert metal and plastic implants that were not well tolerated by the body. Among a number of tested compositions, the one that later became designated by the well-known trademark of 45S5 Bioglass® excelled in its ability to bond to bone and soft tissues. Bonding to living tissues was mediated through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. This feature represented a remarkable milestone, and has inspired many other investigations aiming at further exploring the in vitro and in vivo performances of this and other related BG compositions. This paradigmatic example of a target-oriented research is certainly one of the most valuable contributions that one can learn from Larry Hench. Such a goal-oriented approach needs to be continuously stimulated, aiming at finding out better performing materials to overcome the limitations of the existing ones, including the 45S5 Bioglass®. Its well-known that its main limitations include: (i) the high pH environment that is created by its high sodium content could turn it cytotoxic; (ii) and the poor sintering ability makes the fabrication of porous three-dimensional (3D) scaffolds difficult. All of these relevant features strongly depend on a number of interrelated factors that need to be well compromised. The selected chemical composition strongly determines the glass structure, the biocompatibility, the degradation rate, and the ease of processing (scaffolds fabrication and sintering). This manuscript presents a first general appraisal of the scientific output in the interrelated areas of bioactive glasses and glass-ceramics, scaffolds, implant coatings, and tissue engineering. Then, it gives an overview of the critical issues that need to be considered when developing bioactive glasses for healthcare applications. The aim is to provide knowledge-based tools towards guiding young researchers in the design of new bioactive glass compositions, taking into account the desired functional properties.

Structure and Crystallization of Alkaline-Earth Aluminosilicate Glasses: Prevention of the Alumina-Avoidance Principle.

Aluminosilicate glasses are considered to follow the Al-avoidance principle, which states that Al-O-Al linkages are energetically less favorable, such that, if there is a possibility for Si-O-Al linkages to occur in a glass composition, Al-O-Al linkages are not formed. The current paper shows that breaching of the Al-avoidance principle is essential for understanding the distribution of network-forming AlO4 and SiO4 structural units in alkaline-earth aluminosilicate glasses. The present study proposes a new modified random network (NMRN) model, which accepts Al-O-Al linkages for aluminosilicate glasses. The NMRN model consists of two regions, a network structure region (NS-Region) composed of well-separated homonuclear and heteronuclear framework species and a channel region (C-Region) of nonbridging oxygens (NBOs) and nonframework cations. The NMRN model accounts for the structural changes and devitrification behavior of aluminosilicate glasses. A parent Ca- and Al-rich melilite-based CaO-MgO-Al2O3-SiO2 (CMAS) glass composition was modified by substituting MgO for CaO and SiO2 for Al2O3 to understand variations in the distribution of network-forming structural units in the NS-region and devitrification behavior upon heat treating. The structural features of the glass and glass-ceramics (GCs) were meticulously assessed by advanced characterization techniques including neutron diffraction (ND), powder X-ray diffraction (XRD), 29Si and 27Al magic angle spinning (MAS)-nuclear magnetic resonance (NMR), and in situ Raman spectroscopy. ND revealed the formation of SiO4 and AlO4 tetrahedral units in all the glass compositions. Simulations of chemical glass compositions based on deconvolution of 29Si MAS NMR spectral analysis indicate the preferred formation of Si-O-Al over Si-O-Si and Al-O-Al linkages and the presence of a high concentration of nonbridging oxygens leading to the formation of a separate NS-region containing both SiO4 and AlO4 tetrahedra (Si/Al) (heteronuclear) in addition to the presence of Al[4]-O-Al[4] bonds; this region coexists with a predominantly SiO4-containing (homonuclear) NS-region. In GCs, obtained after heat treatment at 850 °C for 250 h, the formation of crystalline phases, as revealed from Rietveld refinement of XRD data, may be understood on the basis of the distribution of SiO4 and AlO4 structural units in the NS-region. The in situ Raman spectra of the GCs confirmed the formation of a Si/Al structural region, as well as indicating interaction between the Al/Si region and SiO4-rich region at higher temperatures, leading to the formation of additional crystalline phases.

Structure and thermal relaxation of network units and crystallization of lithium silicate based glasses doped with oxides of Al and B.

The current study reports on the relaxation behaviour of lithium silicate based glasses as probed by NMR spectroscopy. A total of four glass compositions were studied with the parent composition being 28Li2O-72SiO2, and added dopants of Al and B. All the compositions showed significant differences in the NMR spectra of both annealed and non-annealed glasses demonstrating the structural relaxation behaviour. We extended our binary statistical mechanical model to these complex compositions to study the relaxation behaviour. By the combined use of the extended statistical mechanical model and broken ergodicity, we shed light on the mechanism of structural relaxation as understood by NMR spectroscopy. We studied the crystallization behaviour of the glasses and reported on the variations of the residual glass composition changes in the crystallization fraction.

Statistics of silicate units in binary glasses.

In this paper, we derive a new model to determine the distribution of silicate units in binary glasses (or liquids). The model is based on statistical mechanics and assumes grand canonical ensemble of silicate units which exchange energy and network modifiers from the reservoir. This model complements experimental techniques, which measure short range order in glasses such as nuclear magnetic resonance (NMR) spectroscopy. The model has potential in calculating the amounts of liquid-liquid phase segregation and crystal nucleation, and it can be easily extended to more complicated compositions. The structural relaxation of the glass as probed by NMR spectroscopy is also reported, where the model could find its usefulness.