Highly flexible copper tape decorated with Ag nanoarrays as ultrasensitive SERS platforms for multi-hazardous pollutant sensing.

A highly flexible and cost-effective copper tape decorated with silver nanoparticles (Cu-TAg) has been developed for surface-enhanced Raman spectroscopy (SERS) sensing of multi-hazardous environmental pollutants. Highly ordered and spherical-shaped silver nanoarrays have been fabricated using a low-cost thermal evaporation method. The structural, morphological, and optical properties of Cu-TAg sensors have been studied and correlated to the corresponding SERS performances. The size of nanoparticles has been successively tuned by varying the deposition time from 5 to 25 s. The nanoparticle sizes were enhanced with an increase in the evaporation time. SERS investigations have revealed that the sensing potential is subsequently improved with an increase in deposition time up to 10 s and then deteriorates with further increase in Ag deposition. The highest SERS activity was acquired for an optimum size of ~ 37 nm; further simulation studies confirmed this observation. Moreover, Cu-TAg sensors exhibited high sensitivity, reproducibility, and recycling characteristics to be used as excellent chemo-sensors. The lower detection limit estimation revealed that it can sense even in the pico-molar range for sensing of rhodamine 6G and methylene blue. The estimated enhancement factor of the sensor is found to be 9.4 × 107. Molecular-specific sensing of a wide range of pollutants such as rhodamine 6G, alizarin red, methylene blue, butylated hydroxy anisole, and penicillin-streptomycin is demonstrated with high efficiencies for micromolar spiked samples. Copper tape functionalized with Ag arrays thus demonstrated to be a promising candidate for low-cost and reusable chemo-sensors for environmental remediation applications.

Highly efficient, label free, ultrafast plasmonic SERS biosensor (silver nanoarrays/Si) to detect GJB2 gene expressed deafness mutations in real time validated with PCR studies.

Rapid diagnostics of any gene mutations related to organ loss is highly demanded now-a days to consume time as well to reduce cost. Currently, Surface enhanced Raman spectroscopy (SERS) is evolved to be a rapid investigating tool to screen gene mutations down to single molecule sensing with regard to the design and development of substrates used for sensing. The current research focuses on particular towards direct detection of deafness mutations associated with single and dual sites related to GJB2 gene. SERS Sensor construction is achieved with plasmonic silver nanoarrays on Si (SNA/Si) substrate by effortless wet chemical methods (Reaction time: 35 s; Concentration: 20 mM). The fabricated SNA/Si facilitates direct sensing of the deafness mutations of GJB2 gene in single as well dual sites with the enhancement of plasmonic hotspots. Normal DNA DMF-33 (GGGGGG) as well as Mutant DNA at single site DMF-9 (GGGGG) were validated by their guanine fingerprint Raman bands intensity quenching for mutant DNA DMF-9 at 1366 cm-1 and 1595 cm-1 respectively. Likewise, double mutations in DMF-19 are substitutional from G to A, portrayed highly intense fingerprint of Adenine Raman bands at 739 cm-1, 1432 cm-1, 1572 cm-1 in comparison to normal DNA (DMF-33). The findings were well analyzed with Raman mapping data which carries almost 625 scans for each DNA sample. The fabricated sensor exhibited the highest sensitivity towards DNA detection down to 0.1 pg/µL with utmost reproducibility. The current study aims to bring in creation of library files for deafness mutations to facilitate clinical diagnostics in a simple and rapid approach.

Smart optical sensing of multiple antibiotic residues from wastewater effluents with ensured specificity using SERS assisted with multivariate analysis.

Surface-enhanced Raman spectroscopy offers great potential for rapid and highly sensitive detection of pharmaceuticals from environmental sources. Herein, we investigated the feasibility of label-free sensing of antibiotic residues from wastewater effluents with high specificity by combining with multivariate analysis. Highly ordered silver nanoarrays with ∼34 nm roughness have been fabricated using a cost-effective electroless deposition technique. As-fabricated Ag arrays showed superior LSPR effects with an enhancement factor of 8 × 107. Excellent reproducibility has also been noticed with RSD values within 11%, whilst the sensor showed good stability and reusability characteristics for being used as a low-cost and reusable sensor. SERS studies demonstrated that antibiotics-spiked wastewater effluents can be detected with high efficiency in a label-free method. The molecular fingerprint bands of antibiotics such as sulfamethoxazole, sulfadiazine, and ciprofloxacin were well analyzed in effluent, tap, and deionized water. It has been found that antibiotics can be detected near picomolar levels; meanwhile, liquid chromatography-mass spectrometry (LC-MS) exhibited a detection limit within nanomolar concentrations only. Furthermore, the specificity of SERS sensing has been further analyzed using a multivariate analysis method, principal component analysis followed by linear discriminant analysis (PCA-LDA); which showed prominent discrimination to distinguish each antibiotic residue from wastewater effluents. The current study presented the potential of Ag nanoarray sensors for rapid, highly specific, and cost-effective analysis of pharmaceutical products for environmental remediation applications.

Diode characteristics, piezo-photocatalytic antibiotic degradation and hydrogen production of Ce3+ doped ZnO nanostructures.

Piezo-photocatalysis of ZnO nanostructures had recently well attracted due to their exceptional potential in degrading the antibiotics and scalable hydrogen production. Here, we have synthesized the Ce3+ doped ZnO nanospheres in a facile wet chemical strategy. Dopant ions induced morphological evolution and optical bandgap tuning had observed in our experiment. Optical absorbance spectrum had confirmed the bandgap shortening occurs with Ce3+ doped ZnO specimens. The bandgap gap value had reduced to 2.82 eV from 3.05eV confirming the visible light responsivity of ZnO nano specimens. Obtained Zn(1-x)CexO nanospheres were utilized to fabricate the p-Si/n- Zn(1-x)CexO heterojunction diodes as well studied the improved electrical conductivity for the Ce3+ specimen-based diodes. Besides, ideality factor and barrier height values of the heterojunction diodes ZnO/p-Si, Zn0.99Ce0.01O/p-Si, Zn0.97Ce0.03O/p-Si, and Zn0.95Ce0.05O/p-Si are 15.97 & 0.43 eV, 15.47 & 0.44 eV, 8.02 & 0.46 eV and 5.21 & 0.47 eV, respectively. Direct sunlight assisted piezo-photocatalytic tetracycline (TC) degradation efficiency of ZnO, Zn0.99Ce0.01O, Zn0.97Ce0.03O, and Zn0.95Ce0.05O nanostructures respectively are 64%, 69%, 74% and 82%. We have produced the hydrogen quantity of 1234 µ mol h-1, 1490 µ mol h-1, 1750 µ mol h-1 and 1980 µ mol h-1 with 0%, 1%, 3% and 5% Ce3+ doped ZnO specimens under the direct sunlight assisted piezo-photocatalytic H2 production from H2S splitting.

Multi-functional silver nanoprism-titanium dioxide hybrid nanoarrays for trace-level SERS sensing and photocatalytic removal of hazardous organic pollutants.

Owing to the excellent optoelectronic properties of metal nanoparticle-semiconductor interfaces; hybrid substrates with superior catalytic and sensing properties can be designed. In the present study, we have attempted to evaluate anisotropic silver nanoprisms (SNP) functionalized titanium dioxide (TiO2) particles for multifunctional applications such as SERS sensing and photocatalytic decomposition of hazardous organic pollutants. Hierarchical TiO2/SNP hybrid arrays have been fabricated via facile and low-cost casting techniques. The structural, compositional, and optical characteristics of TiO2/SNP hybrid arrays were well elucidated and correlated to SERS activities. SERS studies revealed that TiO2/SNP nanoarrays possess almost 288 times enhancement compared to bare TiO2 substrates and 2.6 times enhancement than pristine SNP. The fabricated nanoarrays demonstrated detection limits down to 10-12 M concentration levels and lower spot-to-spot variability of âˆ¼ 11%. The photocatalytic studies showed that almost 94 and 86% of rhodamine B and methylene blue were decomposed within 90 min of visible light exposure. Besides, two times enhancement in photocatalytic activities of TiO2/SNP hybrid substrates was also observed than bare TiO2. The highest photocatalytic activity was exhibited by SNP to TiO2 molar ratio of 1.5 × 10-3. The electrochemical surface area and the interfacial electron-transfer resistance were increased with the increment in TiO2/SNP composite load from 3 to 7 wt%. Differential Pulse Voltammetry (DPV) analysis revealed a higher RhB degradation potential of TiO2/SNP arrays than SNP or TiO2. The synthesized hybrids exhibited excellent reusability without any significant deterioration in photocatalytic properties over five successive cycles. TiO2/SNP hybrid arrays were proved to be multiple platforms for sensing and degrading hazardous pollutants for environmental applications.

Label-free DNA detection using silver nanoprism decorated silicon nanoparticles: Effect of silicon nanoparticle size and doping levels.

In the present work, we have fabricated silver nanoprism (AgNPrs)/silicon nanoparticle (SiNPs) hybrid arrays for highly sensitive detection of biomolecules via surface-enhanced Raman spectroscopy (SERS) technique. SiNPs having 7 to 37 nm in size and with phosphorous doping varying from 1 × 1019 to 1 × 1020 cm-3 were synthesized in nonthermal plasma synthesis. SiNPs were further immobilized on glass substrates using spin-coating, followed by deposition of AgNPrs using the drop-casting method. SERS studies showed that AgNPrs/SiNPs hybrid arrays exhibit substantial amplification of fingerprint bands of rhodamine 6G (R6G) compared to bare silicon as the reference. Raman signal intensity was found to be dependent on the size of SiNPs, with the largest nanoparticles exhibiting the highest SERS enhancement. In addition, an increase in phosphorous doping concentration was found to reduce R6G peak intensities. AgNPrs/SiNPs hybrid arrays showed excellent stability over time and high spot-to-spot reproducibility as well. Moreover, hybrid arrays enabled DNA detection through intense vibrational modes of human genomic DNA, with a lower detection limit of 1.5 pg/µL; indicating that AgNPrs/SiNPs sensors can serve as a reliable and cost-effective biosensing platform for rapid and label-free analysis of biomolecules.

Ultra-sensitive and fast optical detection of the spike protein of the SARS-CoV-2 using AgNPs/SiNWs nanohybrid based sensors.

Severe acute respiratory syndrome SARS-CoV-2 virus led to notable challenges amongst researchers in view of development of new and fast detecting techniques. In this regard, surface-enhanced Raman spectroscopy (SERS) technique, providing a fingerprint characteristic for each material, would be an interesting approach. The current study encompasses the fabrication of a SERS sensor to study the SARS-CoV-2 S1 (RBD) spike protein of the SARS-CoV-2 virus family. The SERS sensor consists of a silicon nanowires (SiNWs) substrate decorated with plasmonic silver nanoparticles (AgNPs). Both SiNWs fabrication and AgNPs decoration were achieved by a relatively simple wet chemical processing method. The study deliberately projects the factors that influence the growth of silicon nanowires, uniform decoration of AgNPs onto the SiNWs matrix along with detection of Rhodamine-6G (R6G) to optimize the best conditions for enhanced sensing of the spike protein. Increasing the time period of etching process resulted in enhanced SiNWs' length from 0.55 to 7.34 µm. Furthermore, the variation of the immersion time in the decoration process of AgNPs onto SiNWs ensued the optimum time period for the enhancement in the sensitivity of detection. Tremendous increase in sensitivity of R6G detection was perceived on SiNWs etched for 2 min (length=0.90 µm), followed by 30s of immersion time for their optimal decoration by AgNPs. These SiNWs/AgNPs SERS-based sensors were able to detect the spike protein at a concentration down to 9.3 × 10-12 M. Strong and dominant peaks at 1280, 1404, 1495, 1541 and 1609 cm-1 were spotted at a fraction of a minute. Moreover, direct, ultra-fast, facile, and affordable optoelectronic SiNWs/AgNPs sensors tuned to function as a biosensor for detecting the spike protein even at a trace level (pico molar concentration). The current findings hold great promise for the utilization of SERS as an innovative approach in the diagnosis domain of infections at very early stages.

Effect of the Helium Background Gas Pressure on the Structural and Optoelectronic Properties of Pulsed-Laser-Deposited PbS Thin Films.

This work focuses on the dependence of the features of PbS films deposited by pulsed laser deposition (PLD) subsequent to the variation of the background pressure of helium (PHe). The morphology of the PLD-PbS films changes from a densely packed and almost featureless structure to a columnar and porous one as the He pressure increases. The average crystallite size related to the (111) preferred orientation increases up to 20 nm for PHe ≥ 300 mTorr. The (111) lattice parameter continuously decreases with increasing PHe values and stabilizes at PHe ≥ 300 mTorr. A downshift transition of the Raman peak of the main phonon (1LO) occurs from PHe = 300 mTorr. This transition would result from electron-LO-phonon interaction and from a lattice contraction. The optical bandgap of the films increases from 1.4 to 1.85 eV as PHe increases from 50 to 500 mTorr. The electrical resistivity of PLD-PbS is increased with PHe and reached its maximum value of 20 Ω·cm at PHe = 300 mTorr (400 times higher than 50 mTorr), which is probably due to the increasing porosity of the films. PHe = 300 mTorr is pointed out as a transitional pressure for the structural and optoelectronic properties of PLD-PbS films.

Enhanced photocatalytic activities of silicon nanowires/graphene oxide nanocomposite: Effect of etching parameters.

Homogeneous and vertically aligned silicon nanowires (SiNWs) were successfully fabricated using silver assisted chemical etching technique. The prepared samples were characterized using scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Photocatalytic degradation properties of graphene oxide (GO) modified SiNWs have been investigated. We found that the SiNWs morphology depends on etching time and etchant composition. The SiNWs length could be tuned from 1 to 42 µm, respectively when varying the etching time from 5 to 30 min. The etchant concentration was found to accelerate the etching process; doubling the concentrations increases the length of the SiNWs by a factor of two for fixed etching time. Changes in bundle morphology were also studied as function of etching parameters. The SiNWs diameter was found to be independent of etching time or etchant composition while the size of the SiNWs bundle increases with increasing etching time and etchant concentration. The addition of GO was found to improve significantly the photocatalytic activity of SiNWs. A strong correlation between etching parameters and photocatalysis efficiency has been observed, mainly for SiNWs prepared at optimum etching time and etchant concentrations of 10 min and 4:1:8. A degradation of 92% was obtained which further improved to 96% by addition of hydrogen peroxide. Only degradation efficiency of 16% and 31% has been observed for bare Si and GO/bare Si samples respectively. The obtained results demonstrate that the developed SiNWs/GO composite exhibits excellent photocatalytic performance and could be used as potential platform for the degradation of organic pollutants.

Structural effects of silver-nanoprism-decorated Si nanowires on surface-enhanced Raman scattering.

Surface enhanced Raman scattering (SERS) is an important analytical tool for the optochemical detection of molecules. The enhancement is commonly achieved by engineering (i) novel types and morphologies of plasmonic nanomaterials, and (ii) patterned or roughened supporting substrates of high surface area for increased light scattering and molecule adsorption. Si substrates can be easily and reproducibly textured for effective SERS applications. In this work, silver nanoprisms (AgNPr) coated silicon nanowire (SiNWs) of different morphologies have been prepared by metal-assisted chemical etching and tested for SERS detection of R6G dye. By varying the etching time from 5 to 30 min, the nanowires' lengths increased from 2.4 to 10.5 µm and resulted in a variable topological morphology of the substrates in terms of bundles and valleys. We found that an optimum of 10 min etching time led to the highest SERS enhancement of R6G on AgNPr/SiNWs at 612 cm-1 Raman shift (30× compared to R6G/Si and 2× compared to R6G/AgNPr/Si), with a detection limit comparable to that of state-of-the-art performances (down to 5×10-10 M of R6G). Such an enhancement is attributed to a middle ground between increased overall surface area of SiNWs, and the available bundle tops trapping the AgNPr and R6G molecules.

Photocatalytic activity of Cr-doped TiO2 nanoparticles deposited on porous multicrystalline silicon films.

This work deals with the deposition of Cr-doped TiO2 thin films on porous silicon (PS) prepared from electrochemical anodization of multicrystalline (mc-Si) Si wafers. The effect of Cr doping on the properties of the TiO2-Cr/PS/Si samples has been investigated by means of X-ray diffraction (XRD), atomic force microcopy (AFM), photoluminescence, lifetime, and laser beam-induced current (LBIC) measurements. The photocatalytic activity is carried out on TiO2-Cr/PS/Si samples. It was found that the TiO2-Cr/PS/mc-Si type structure degrades an organic pollutant (amido black) under ultraviolet (UV) light. A noticeable degradation of the pollutant is obtained for a Cr doping of 2 at. %. This result is discussed in light of LBIC and photoluminescence measurements.

Hybrid integration of Ca 0.28 Ba 0.72 Nb2O6 thin film electro-optic waveguides with silica/silicon substrates.

Ca(0.28)Ba(0.72)Nb(2)O(6) (CBN-28) waveguides based on thin film technology were fabricated on SiO(2)/(100) Si substrates. By using X-ray diffraction, we confirmed the preferential c-axis orientation of the CBN structures. An effective unclamped electro-optic r33 coefficient of 12 pm/V was measured in CBN thin films by using an ellipsometric technique in reflection geometry. In addition, by means of a Fabry-Perot technique, the propagation losses of our strip loaded waveguides were estimated to be as low as 4.8 dB/cm and 6.5 dB/cm at telecommunication wavelengths for the fundamental TE and TM modes, respectively.

Electronically reconfigurable superimposed waveguide long-period gratings.

The perturbation to the refractive index induced by a periodic electric field from two systems of interdigitated electrodes with the electrode-finger period l is analyzed for a waveguide with an electro-optically (EO) active core-cladding. It is shown that the electric field induces two superimposed transmissive refractive-index gratings with different symmetries of their cross-section distributions. One of these gratings has a constant component of an EO-induced refractive index along with its variable component with periodicity l, whereas the second grating possesses only a variable component with periodicity 2l. With the proper waveguide design, the gratings provide interaction between a guided fundamental core mode and two guided cladding modes. Through the externally applied electric potential, these gratings can be independently switched ON and OFF, or they can be activated simultaneously with electronically controlled weighting factors. Coupling coefficients of both gratings are analyzed in terms of their dependence on the electrode duty ratio and dielectric permittivities of the core and cladding. The coupled-wave equations for the superimposed gratings are written and solved. The spectral characteristics are investigated by numerical simulation. It is found that the spectral characteristics are described by a dual-dip transmission spectrum with individual electronic control of the dip depths and positions. Within the concept, a new external potential application scheme is described in which the symmetry of the cross-sectional distribution of the refractive index provides coupling only between the core mode and the cladding modes, preventing interaction of the cladding modes with each another. This simple concept opens opportunities for developing a number of tunable devices for integrated optics by use of the proposed design as a building block.