Impact of Recombinant VSV-HIV Prime, DNA-Boost Vaccine Candidates on Immunogenicity and Viremia on SHIV-Infected Rhesus Macaques.

Currently, no effective vaccine to prevent human immunodeficiency virus (HIV) infection is available, and various platforms are being examined. The vesicular stomatitis virus (VSV) vaccine vehicle can induce robust humoral and cell-mediated immune responses, making it a suitable candidate for the development of an HIV vaccine. Here, we analyze the protective immunological impacts of recombinant VSV vaccine vectors that express chimeric HIV Envelope proteins (Env) in rhesus macaques. To improve the immunogenicity of these VSV-HIV Env vaccine candidates, we generated chimeric Envs containing the transmembrane and cytoplasmic tail of the simian immunodeficiency virus (SIV), which increases surface Env on the particle. Additionally, the Ebola virus glycoprotein was added to the VSV-HIV vaccine particles to divert tropism from CD4 T cells and enhance their replications both in vitro and in vivo. Animals were boosted with DNA constructs that encoded matching antigens. Vaccinated animals developed non-neutralizing antibody responses against both the HIV Env and the Ebola virus glycoprotein (EBOV GP) as well as systemic memory T-cell activation. However, these responses were not associated with observable protection against simian-HIV (SHIV) infection following repeated high-dose intra-rectal SHIV SF162p3 challenges.

Improved Manufacturing Methods of Extracellular Vesicles Pseudotyped with the Vesicular Stomatitis Virus Glycoprotein.

Extracellular vesicles (EV), which expose the vesicular stomatitis virus glycoprotein (VSVG) on their surface, are used for delivery of nucleic acids and proteins in human cell lines. These particles are biomanufactured using methods that are difficult to scale up. Here, we describe the development of the first EV-VSVG production process in serum-free media using polyethylenimine (PEI)-based transient transfection of HEK293 suspension cells, as well as the first EV-VSVG purification process to utilize both ultracentrifugation and chromatography. Three parameters were investigated for EV-VSVG production: cell density, DNA concentration, and DNA:PEI ratio. The best production titer was obtained with 3 × 106 cells/mL, a plasmid concentration of 2 µg/mL, and a DNA:PEI ratio of 1:4. The production kinetics of VSVG was performed and showed that the highest amount of VSVG was obtained 3 days after transfection. Addition of cell culture supplements during the transfection resulted in an increase in VSVG production, with a maximum yield obtained with 2 mM of sodium butyrate added 18 h after transfection. Moreover, the absence of EV-VSVG during cell transfection with a GFP-coding plasmid revealed to be ineffective, with no fluorescent cells. An efficient EV-VSVG purification procedure consisting of a two-step concentration by low-speed centrifugation and sucrose cushion ultracentrifugation followed by a heparin affinity chromatography purification was also developed. Purified bioactive EV-VSVG preparations were characterized and revealed that EV-VSVG are spherical particles of 176.4 ± 88.32 nm with 91.4% of protein similarity to exosomes.

PEGylation of a Peptide-Based Amphiphilic Delivery Agent and Influence on Protein Delivery to Cells.

The cell membrane is a restrictive biological barrier, especially for large, charged molecules, such as proteins. The use of cell-penetrating peptides (CPPs) can facilitate the delivery of proteins, protein complexes, and peptides across the membrane by a variety of mechanisms that are all limited by endosomal sequestration. To improve CPP-mediated delivery, we previously reported the rapid and effective cytosolic delivery of proteins in vitro and in vivo by their coadministration with the peptide S10, which combines a CPP and an endosomal leakage domain. Amphiphilic peptides with hydrophobic properties, such as S10, can interact with lipids to destabilize the cell membrane, thus promoting cargo internalization or escape from endosomal entrapment. However, acute membrane destabilization can result in a dose-limiting cytotoxicity. In this context, the partial or transient deactivation of S10 by modification with methoxy poly(ethylene glycol) (mPEG; i.e., PEGylation) may provide the means to alter membrane destabilization kinetics, thereby attenuating the impact of acute permeabilization on cell viability. This study investigates the influence of PEGylation parameters (molecular weight, architecture, and conjugation chemistry) on the delivery efficiency of a green fluorescent protein tagged with a nuclear localization signal (GFP-NLS) and cytotoxicity on cells in vitro. Results suggest that PEGylation mostly interferes with adsorption and secondary structure formation of S10 at the cell membrane, and this effect is exacerbated by the mPEG molecular weight. This effect can be compensated for by increasing the concentration of conjugates prepared with lower molecular weight mPEG (5 to ∼20 kDa) but not for conjugates prepared with higher molecular weight mPEG (40 kDa). For conjugates prepared with moderate-to-high molecular weight mPEG (10 to 20 kDa), partial compensation of inactivation could be achieved by the inclusion of a reducible disulfide bond, which provides a mechanism to liberate the S10 from the polymer. Grafting multiple copies of S10 to a high-molecular-weight multiarmed PEG (40 kDa) improved GFP-NLS delivery efficiency. However, these constructs were more cytotoxic than the native peptide. Considering that PEGylation could be harnessed for altering the pharmacokinetics and biodistribution profiles of peptide-based delivery agents in vivo, the trends observed herein provide new perspectives on how to manipulate the membrane permeabilization process, which is an important variable for achieving delivery.

Inducible HEK293 AAV packaging cell lines expressing Rep proteins.

Packaging or producer cell lines for scalable recombinant adeno-associated virus (rAAV) production have been notoriously difficult to create due in part to the cytostatic nature of the Rep proteins required for AAV production. The most difficult challenge being creating AAV packaging cell lines using HEK293 parental cells, currently the best mammalian platform for rAAV production due to the constitutive expression of E1A in HEK293 cells, a key REP transcription activator. Using suspension and serum-free media adapted HEK293SF carrying a gene expression regulation system induced by addition of cumate and coumermycin, we were able to create REP-expressing AAV packaging cells. This was achieved by carefully choosing two of the AAV Rep proteins (Rep 40 and 68), using two inducible promoters with different expression levels and integrating into the cells through lentiviral vector transduction. Three of our best clones produced rAAV titers comparable to titers obtained by standard triple plasmid transfection of their parental cells. These clones were stable for up to 7 weeks under continuous cultures condition. rAAV production from one clone was also validated at scale of 1 L in a wave bioreactor using serum-free suspension culture.

Purification of recombinant vesicular stomatitis virus-based HIV vaccine candidate.

In this work, laboratory- and large-scale methods were tested for purification of a human immunodeficiency virus (HIV) vaccine candidate, based on recombinant vesicular stomatitis virus (rVSV). First step of the purification, the clarification of the rVSVs produced in serum-free cell culture medium, was tested by centrifugation and filtration using different filtration media and pore sizes (0.45 to 30 µm). To reduce the supernatant volume and process time, the clarified sample was concentrated by ultrafiltration either using tangential flow filtration or centrifugal-based filtration units, depending on the process scale. The final purification step at laboratory-scale, was carried out by density gradient ultracentrifugation, the recovery of which was compared with chromatographic purification at large-scale. The virus preparations were analyzed using dynamic light scattering to verify the virus size and transmission electron microscopy for purity and virus morphology. Density gradient ultracentrifugation allowed the recovery of ≥ 80% infectious particles and reduced the contaminant DNA and host cell proteins relatively to standard ultracentrifugation pelleting using a sucrose cushion. At large-scale, weak and strong anion-exchangers were tested and compared. The best columns allowed infectious virus recoveries as high as 77% and eliminated 92% of host cell proteins.

Oleic acid based experimental evolution of Bacillus megaterium yielding an enhanced P450 BM3 variant.

BACKGROUND: Unlike most other P450 cytochrome monooxygenases, CYP102A1 from Bacillus megaterium (BM3) is both soluble and fused to its redox partner forming a single polypeptide chain. Like other monooxygenases, it can catalyze the insertion of oxygen unto the carbon-hydrogen bond which can result in a wide variety of commercially relevant products for pharmaceutical and fine chemical industries. However, the instability of the enzyme holds back the implementation of a BM3-based biocatalytic industrial processes due to the important enzyme cost it would prompt. RESULTS: In this work, we sought to enhance BM3's total specific product output by using experimental evolution, an approach not yet reported to improve this enzyme. By exploiting B. megaterium's own oleic acid metabolism, we pressed the evolution of a new variant of BM3, harbouring 34 new amino acid substitutions. The resulting variant, dubbed DE, increased the conversion of the substrate 10-pNCA to its product p-nitrophenolate 1.23 and 1.76-fold when using respectively NADPH or NADH as a cofactor, compared to wild type BM3. CONCLUSIONS: This new DE variant, showed increased organic cosolvent tolerance, increased product output and increased versatility in the use of either nicotinamide cofactors NADPH and NADH. Experimental evolution can be used to evolve or to create libraries of evolved BM3 variants with increased productivity and cosolvent tolerance. Such libraries could in turn be used in bioinformatics to further evolve BM3 more precisely. The experimental evolution results also supports the hypothesis which surmises that one of the roles of BM3 in Bacillus megaterium is to protect it from exogenous unsaturated fatty acids by breaking them down.

Production and Use of Gesicles for Nucleic Acid Delivery.

Over-expression of the vesicular stomatitis virus glycoprotein (VSVG) in mammalian cells can induce the formation of VSVG-pseudotyped vesicles (named "gesicles") from membrane budding. Its use as a nucleic acid delivery tool is still poorly documented. Naked-plasmid DNA can be delivered in animal cells with gesicles in presence of hexadimethrine bromide (polybrene). However, little is known about gesicle manufacturing process and conditions to obtain successful nucleic acid delivery. In this study, gesicles production process using polyethylenimine (PEI)-transfected HEK293 cells was developed by defining the VSVG-plasmid concentration, the DNA:PEI mass ratio, and the time of gesicle harvest. Furthermore, parameters described in the literature relevant for nucleic acid delivery such as (i) component concentrations in assembly mixture, (ii) component addition order, (iii) incubation time, and (iv) polybrene concentration were tested by assessing the transfection capacity of the gesicles complexed with a green fluorescent protein (GFP)-coding plasmid. Interestingly, freezing/thawing cycles and storage at + 4 °C, - 20 °C, and - 80 °C did not reduce gesicles' ability to transfer plasmid DNA. Transfection efficiency of 55% and 22% was obtained for HeLa cells and for hard-to-transfect cells such as human myoblasts, respectively. For the first time, gesicles were used for delivery of a large plasmid (18-kb) with 42% of efficiency and for enhanced green fluorescent protein (eGFP) gene silencing with siRNA (up to 60%). In conclusion, gesicles represent attractive bioreagents with great potential to deliver nucleic acids in mammalian cells.

Optimisation of Cytochrome P450 BM3 Assisted by Consensus-Guided Evolution.

Cytochrome P450 enzymes have attracted much interest over the years given their ability to insert oxygen into saturated carbon-hydrogen bonds, a difficult feat to accomplish by traditional chemistry. Much of the activity in this field has centered on the bacterial enzyme CYP102A1, or BM3, from Bacillus megaterium, as it has shown itself capable of hydroxylating/acting upon a wide range of substrates, thereby producing industrially relevant pharmaceuticals, fine chemicals, and hormones. In addition, unlike most cytochromes, BM3 is both soluble and fused to its natural redox partner, thus facilitating its use. The industrial use of BM3 is however stifled by its instability and its requirement for the expensive NADPH cofactor. In this work, we added several mutations to the BM3 mutant R966D/W1046S that enhanced the turnover number achievable with the inexpensive cofactors NADH and NBAH. These new mutations, A769S, S847G, S850R, E852P, and V978L, are localized on the reductase domain of BM3 thus leaving the oxidase domain intact. For NBAH-driven reactions by new mutant NTD5, this led to a 5.24-fold increase in total product output when compared to the BM3 mutant R966D/W1046S. For reactions driven by NADH by new mutant NTD6, this enhanced total product output by as much as 2.3-fold when compared to the BM3 mutant R966D/W1046S. We also demonstrated that reactions driven by NADH with the NTD6 mutant not only surpassed total product output achievable by wild-type BM3 with NADPH but also retained the ability to use this latter cofactor with greater total product output as well.

Evaluation of novel HIV vaccine candidates using recombinant vesicular stomatitis virus vector produced in serum-free Vero cell cultures.

Acquired Immune Deficiency Syndrome (AIDS) in humans is a result of the destruction of the immune system caused by Human Immunodeficiency Virus (HIV) infection. This serious epidemic is still progressing world-wide. Despite advances in treatment, a safe and effective preventive HIV vaccine is desired to combat this disease, and to save millions of lives. However, such a vaccine is not available yet although extensive amounts of resources in research and development have been invested over three decades. In light of the recently approved Ebola virus disease vaccine based on a recombinant vesicular stomatitis virus (rVSV-ZEBOV), we present the results of our work on three novel VSV-vectored HIV vaccine candidates. We describe the design, rescue, production and purification method and evaluate their immunogenicity in mice prior to preclinical studies that will be performed in non-human primates. The production of each of the three candidate vaccines (rVSV-B6-NL4.3Env/SIVtm, rVSV-B6-NL4.3Env/Ebtm and rVSV-B6-A74Env(PN6)/SIVtm) was evaluated in small scale in Vero cells and it was found that production kinetics on Vero cells vary depending on the HIV gp surface protein used. Purified virus preparations complied with the WHO restrictions for the residual DNA and host cell protein contents. Finally, when administered to mice, all three rVSV-HIV vaccine candidates induced an HIV gp140-specific antibody response.

Membrane permeabilizing amphiphilic peptide delivers recombinant transcription factor and CRISPR-Cas9/Cpf1 ribonucleoproteins in hard-to-modify cells.

Delivery of recombinant proteins to therapeutic cells is limited by a lack of efficient methods. This hinders the use of transcription factors or Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) ribonucleoproteins to develop cell therapies. Here, we report a soluble peptide designed for the direct delivery of proteins to mammalian cells including human stem cells, hard-to-modify primary natural killer (NK) cells, and cancer cell models. This peptide is composed of a 6x histidine-rich domain fused to the endosomolytic peptide CM18 and the cell penetrating peptide PTD4. A less than two-minute co-incubation of 6His-CM18-PTD4 peptide with spCas9 and/or asCpf1 CRISPR ribonucleoproteins achieves robust gene editing. The same procedure, co-incubating with the transcription factor HoxB4, achieves transcriptional regulation. The broad applicability and flexibility of this DNA- and chemical-free method across different cell types, particularly hard-to-transfect cells, opens the way for a direct use of proteins for biomedical research and cell therapy manufacturing.

Dynamics of Endothelial Cell Responses to Laminar Shear Stress on Surfaces Functionalized with Fibronectin-Derived Peptides.

Surface endothelialization could improve the long-term performance of vascular grafts and stents. We previously demonstrated that aerosol-generated fibronectin-derived peptide micropatterns consisting of GRGDS spots over a WQPPRARI background increase endothelial cell yields in static cultures. We developed a novel fluorophore-tagged RGD peptide (RGD-TAMRA) to visualize cell-surface interactions in real-time. Here, we studied the dynamics of endothelial cell response to laminar flow on these peptide-functionalized surfaces. Endothelial cells were exposed to 22 dyn/cm2 wall shear stress while acquiring time-lapse images. Cell surface coverage and cell alignment were quantified by undecimated wavelet transform multivariate image analysis. Similar to gelatin-coated surfaces, surfaces with uniform RGD-TAMRA distribution led to cell retention and rapid cell alignment (∼63% of the final cell alignment was reached within 1.5 h), contrary to the micropatterned surfaces. The RGD-TAMRA peptide is a promising candidate for endothelial cell retention under flow, and the spray-based micropatterned surfaces are more promising for static cultures.

Gene Transfer of ZMapp Antibodies Mediated by Recombinant Adeno-Associated Virus Protects Against Ebola Infections.

Vectored delivery of the ZMapp antibody cocktail (c2G4, c4G7, and c13C6) by using recombinant adeno-associated viruses (rAAVs) could be useful for preventive immunization against Ebola virus infections because rAAVs can generate long-term antibody expression. Three rAAVs (serotype 9) encoding chimeric ZMapp antibodies were produced by triple-plasmid transfection up to 10 L-scale in WAVE bioreactors using HEK293 cells grown in suspension/serum-free conditions. Efficacy of AAV-c2G4 via intravenous (i.v.), intramuscular (i.m.), and intranasal (i.n.) routes of administration was evaluated in mice with two different doses of 2.7 × 1010 and 13.0 × 1010 vector genomes (vg). The best protective efficacies after Ebola challenge were obtained with the i.v. and i.m. routes. Serum concentrations of ZMapp antibodies positively correlated with survivability. Efficacy of the rAAV-ZMapp cocktail was then evaluated at a higher dose of 30.0 × 1010 vg. It conferred a more robust protection (90% i.v. and 60% i.m.) than rAAV-c4G7 (30%) and rAAV-c13C6 (70%), both administered separately at the same dose. Delivery of rAAV-c2G4 alone achieved up to 100% protection (100% i.v. and 90% i.m.) at the same dose. In conclusion, the preventive treatment was effective in mice. However, no advantage was observed for using the rAAV-ZMapp cocktail in comparison to the utilization of the single rAAV-c2G4.

Manufacturing of recombinant adeno-associated viruses using mammalian expression platforms.

Manufacturing practices for recombinant adeno-associated viruses (AAV) have improved in the last decade through the development of new platforms in conjunction with better production and purification methods. In this review, we discuss the advantages and limitations of the most popular systems and methods employed with mammalian cell platforms. Methods and systems such as transient transfection, packaging and producer cells and adenovirus and herpes simplex virus are described. In terms of best production yields, they are comparable with about 104 -105 vector genomes produced per cell but transient transfection of HEK293 cells is by far the most commonly used. For small-scale productions, AAV can be directly purified from the producing cell lysate by ultracentrifugation on a CsCl or iodixanol-step gradient whereas large-scale purification requires a combination of multiple steps. Micro/macrofiltration (i.e. including tangential flow filtration and/or dead-end filtration) and chromatography based-methods are used for large-scale purification. Purified AAV products must then be quantified and characterized to ensure quality. Recent purification methods and current analytical techniques are reviewed here. Finally, AAV technology is very promising, but manufacturing improvements are still required to meet the needs of affordable, safe and effective AAV vectors essential for licensing of gene therapy clinical protocols.

Antibody Delivery Mediated by Recombinant Adeno-associated Virus for the Treatment of Various Chronic and Infectious Diseases.

Monoclonal antibodies (mAbs) based-therapies are currently one of the most successful strategies to treat immune disorders, cancer and infectious diseases. Vectors derived from adenoassociated virus (AAV) are very attractive to deliver the genes coding the mAbs because they allow long-term expression thus, reducing the number of administrations. They can also penetrate biological barriers such as the blood-brain-barrier to transduce cells localized in immunoprivileged organs. Recent animal studies with AAV have demonstrated the capacity of AAV to deliver sufficient quantity of antibodies to confer an efficient immunoprotection against chronic and infectious diseases for several months to years. The treatment was successfully applied either for prophylaxis or therapeutic use, depending on the disease and its progression. In this review, we discuss the advantages and the limitations of AAV for mAb and immunoadhesin delivery. Recent advances in vector design and antibody engineering are also presented. Optimization of the vector design can improve the kinetic and the level of mAbs expression whereas protein engineering can enhance transgene product properties. Furthermore, an exhaustive review of pre-clinical studies for chronic diseases including Alzheimer disease, amyotrophic lateral sclerosis and cancer is presented as well as for infectious diseases.

Non-viral nucleic acid delivery methods.

INTRODUCTION: Delivery of nucleic acid-based molecules in human cells is a highly studied approach for the treatment of several disorders including monogenic diseases and cancers. Non-viral vectors for DNA and RNA transfer, although in general less efficient than virus-based systems, are particularly well adapted mostly due to the absence of biosafety concerns. Non-viral methods could be classified in two main groups: physical and vector-assisted delivery systems. Both groups comprise several different methods, none of them universally applicable. The choice of the optimal method depends on the predefined objectives and the features of targeted micro-environment. Areas covered: In this review, the authors discuss non-viral techniques and present recent therapeutic achievements in ex vivo and in vivo nucleic acid delivery by most commonly used techniques while emphasizing the role of 'biological particles', namely peptide transduction domains, virus like particles, gesicles and exosomes. Expert opinion: The number of available non-viral transfection techniques used for human therapy increased rapidly, followed by still moderate success in efficacy. The prospects are to be found in design of multifunctional hybrid systems that reflect the viral efficiency. In this respect, biological particles are very promising.

Virus-Like Particles Derived from HIV-1 for Delivery of Nuclear Proteins: Improvement of Production and Activity by Protein Engineering.

Virus-like particles (VLPs) derived from retroviruses and lentiviruses can be used to deliver recombinant proteins without the fear of causing insertional mutagenesis to the host cell genome. In this study we evaluate the potential of an inducible lentiviral vector packaging cell line for VLP production. The Gag gene from HIV-1 was fused to a gene encoding a selected protein and it was transfected into the packaging cells. Three proteins served as model: the green fluorescent protein and two transcription factors-the cumate transactivator (cTA) of the inducible CR5 promoter and the human Krüppel-like factor 4 (KLF4). The sizes of the VLPs were 120-150 nm in diameter and they were resistant to freeze/thaw cycles. Protein delivery by the VLPs reached up to 100% efficacy in human cells and was well tolerated. Gag-cTA triggered up to 1100-fold gene activation of the reporter gene in comparison to the negative control. Protein engineering was required to detect Gag-KLF4 activity. Thus, insertion of the VP16 transactivation domain increased the activity of the VLPs by eightfold. An additional 2.4-fold enhancement was obtained by inserting nuclear export signal. In conclusion, our platform produced VLPs capable of efficient protein transfer, and it was shown that protein engineering can be used to improve the activity of the delivered proteins as well as VLP production.

Analytical solution of Luedeking-Piret equation for a batch fermentation obeying Monod growth kinetics.

Not so many fermentation mathematical models allow analytical solutions of batch process dynamics. The most widely used is the combination of the logistic microbial growth kinetics with Luedeking-Piret bioproduct synthesis relation. However, the logistic equation is principally based on formalistic similarities and only fits a limited range of fermentation types. In this article, we have developed an analytical solution for the combination of Monod growth kinetics with Luedeking-Piret relation, which can be identified by linear regression and used to simulate batch fermentation evolution. Two classical examples are used to show the quality of fit and the simplicity of the method proposed. A solution for the combination of Haldane substrate-limited growth model combined with Luedeking-Piret relation is also provided. These models could prove useful for the analysis of fermentation data in industry as well as academia.

New developments in lentiviral vector design, production and purification.

INTRODUCTION: Lentiviruses are a very potent class of viral vectors for which there is presently a rapidly growing interest for a number of gene therapy. However, their construction, production and purification need to be performed according to state-of-the-art techniques in order to obtain sufficient quantities of high purity material of any usefulness and safety. AREAS COVERED: The recent advances in the field of recombinant lentivirus vector design, production and purification will be reviewed with an eye toward its utilization for gene therapy. Such a review should be helpful for the potential user of this technology. EXPERT OPINION: The principal hurdles toward the use of recombinant lentivirus as a gene therapy vector are the low titer at which it is produced as well as the difficulty to purify it at an acceptable level without degrading it. The recent advances in the bioproduction of this vector suggest these issues are about to be resolved, making the retrovirus gene therapy a mature technology.

High-level recombinant protein production in CHO cells using lentiviral vectors and the cumate gene-switch.

Fast and efficient production of recombinant proteins for structural and functional studies is a crucial issue for research and for industry. To this end, we have developed an efficient system to generate in less than 2 months, starting from the cDNA, pools of CHO cells stably expressing high-level of recombinant proteins. It is based on lentiviral vectors (LVs) for stable transduction coupled with the cumate gene-switch for inducible and efficient gene expression. Transcription is initiated upon binding of the cumate transactivator (cTA) or the reverse cTA (rcTA) to the CR5 promoter. Binding of cTA or rcTA is prevented or induced by addition of cumate respectively. We first validated the CHO/LV production system with an LV carrying the secreted alkaline phosphatase (SEAP), whose expression was linked to the green fluorescent protein (GFP) through an internal ribosome entry site (IRES). CHO cells stably expressing the cTA (CHO-cTA) were transduced at various multiplicity of infection (MOI). Pools of cells were incubated at 37 and 30 degrees C during 10 days. Optimal SEAP production (65 microg/mL) was achieved at 30 degrees C with a MOI of 200. The pool stability was demonstrated for 48 days of culture by GFP expression analysis. The system was also evaluated using LV expressing three typical therapeutic proteins (a protein made up of the extracellular domain of CD200 fused to IgG Fc region [CD200Fc], a chimeric antibody [chB43], and erythropoietin [EPO]). CHO cells expressing rcTA (CHO-Cum2) were transduced with these LVs at a MOI of 200 and production was tested at 30 degrees C. After 13 days of culture, 235, 160, and 206 microg/mL of CD200Fc, chB43, and EPO were produced, respectively. The ON/OFF ratio of these pools was equal to 6 for CD200Fc, 16 for chB43, and 74 for EPO. In conclusion, this system should be very useful to produce mg quantities of recombinant proteins in a timely manner in serum free suspension culture of CHO cells for preclinical studies.

Fluorescent labeling in semi-solid medium for selection of mammalian cells secreting high-levels of recombinant proteins.

BACKGROUND: Despite the powerful impact in recent years of gene expression markers like the green fluorescent protein (GFP) to link the expression of recombinant protein for selection of high producers, there is a strong incentive to develop rapid and efficient methods for isolating mammalian cell clones secreting high levels of marker-free recombinant proteins. Recently, a method combining cell colony growth in methylcellulose-based medium with detection by a fluorescently labeled secondary antibody or antigen has shown promise for the selection of Chinese Hamster Ovary (CHO) cell lines secreting recombinant antibodies. Here we report an extension of this method referred to as fluorescent labeling in semi-solid medium (FLSSM) to detect recombinant proteins significantly smaller than antibodies, such as IGF-E5, a 25 kDa insulin-like growth factor derivative. RESULTS: CHO cell clones, expressing 300 microg/ml IGF-E5 in batch culture, were isolated more easily and quickly compared to the classic limiting dilution method. The intensity of the detected fluorescent signal was found to be proportional to the amount of IGF-E5 secreted, thus allowing the highest producers in the population to be identified and picked. CHO clones producing up to 9.5 microg/ml of Tissue-Plasminogen Activator (tPA, 67 kDa) were also generated using FLSSM. In addition, IGF-E5 high-producers were isolated from 293SF transfectants, showing that cell selection in semi-solid medium is not limited to CHO and lymphoid cells. The best positive clones were collected with a micromanipulator as well as with an automated colony picker, thus demonstrating the method's high throughput potential. CONCLUSION: FLSSM allows rapid visualization of the high secretors from transfected pools prior to picking, thus eliminating the tedious task of screening a high number of cell isolates. Because of its rapidity and its simplicity, FLSSM is a versatile method for the screening of high producers for research and industry.