Tuning the slow magnetic relaxation with the substituents in anilate bridged bis(dysprosium) complexes.

Dinuclear lanthanide complexes [((HB(pz)3)2Dy)2(µ-Th2An)] (1Dy) and [((HB(pz)3)2Dy)2(µ-ClCNAn)] (2Dy), based on the hydrotris(pyrazol-1-yl)borate (HBpz3-) scorpionate capping ligand and anilate (An2-) bridging linkers, namely homosubstituted dithiophene- and heterosubstituted chlorocyanoanilate, bearing electron-donating and withdrawing substituents at the 3,6-positions of the benzoquinone core, are reported. 1Dy shows an octacoordinated {N6O2} DyIII ion within a D4h distorted square antiprismatic coordination, an ideal geometry for Single-Molecule Magnet (SMM) behavior, given its oblate nature, whereas in 2Dy the octacoordinated DyIII ion adopts a D2d triangular dodecahedron geometry, while maintaining the same {N6O2} coordination sphere. Both complexes show field-induced single molecule magnet (SMM) behaviour, with tuning of the slow magnetic relaxation as a function of the nature of the substituents at the 3,6-positions of the anilate moiety. A comparison of the Arrhenius fitting parameters for 1Dy and 2Dy supports the hypothesis that square antiprismatic DyIII complexes, as 1Dy, exhibit higher energy barriers. This interpretation is supported by ab initio calculations that also shed light on the crucial role of intermolecular dipolar interactions.

Memory effect in ferroelectric polyvinylidene fluoride (PVDF) films via spin crossover probes.

Ferroelectric polymers are of great interest due to their intrinsic processing capabilities, superior to classic inorganic ferroelectric materials. For example, polyvinylidene fluoride (PVDF) and derivatives have been incorporated into multiple device architectures for information storage and transfer. Here we report an additional advantage of organic ferroelectrics as their flexibility allows for the preparation of composites with spin crossover (SCO) probes to tune their ferroelectric parameters by external stimuli. We demonstrate how the saturation polarization and coercive field of a ferroelectric [Fe(NH2trz)3](NO3)2/PVDF composite film depends on the spin state of the [Fe(NH2trz)3](NO3)2, opening a thermal hysteresis and delivering a ferroelectric material with a memory effect. This switching may now be used to tune the function of a device, adding additional information states to the elemental binary logic. Additional evidence of the synergy between the two components of these films was also found in the glass transition of the PVDF component that induces small changes in the paramagnetic component.

Complementary probes for the electrochemical interface.

The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales - including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory.

Structure and Electronic Properties of Large Oligomeric Heterometallic 3d/CeIV Polyoxometalates.

Merging the rich chemistry of Ce(IV) polyoxometalates (POMs) with that of 3d polyanions remains a challenge due to the strong competition between these highly oxophilic lanthanide cations and 3d metallic ions for coordination to lacunary molecular metal oxides. We report herein the characterization of an unprecedented water stable hexameric CeIV/CoII POM (Ce12Co6) made of two {(SiW9)2Ce6} units connected to a {(SiW10)2Co6(PO4)2} core. In addition, the pentameric CeIV/NiII compound Ce6Ni8, where two {PW9Ni3W} and a {PW10Ni2} fragments are grafted on a {(PW9)2Ce6} moiety, has been obtained. Magnetic studies of Ce6Ni8 revealed ferromagnetic interactions between the NiII centers constituting the {Ni3PW10} fragments, in agreement with the geometry of such a trinuclear cluster. Related insoluble barium salts of Ce12Co6 and Ce6Ni8 were also prepared, allowing their solid-state electrochemical investigations and showing in particular that in Ce12Co6, both the cobalt, cerium, and silicotungstate moieties are electroactive. Finally, photophysical studies demonstrate the formation of long-lived reduced POMs photosensitized by [Ru(bpy)3]2+, suggesting that Ce12Co6 and Ce6Ni8 could be used as efficient reservoirs of reduction equivalents for photocatalytic reactions.

Terbium and Europium Chlorocyananilate-Based 2D Coordination Polymers.

Two-dimensional layered coordination polymers based on the hetero-substituted 3-chloro-6-cyano-2,5-dihydroxybenzoquinone ligands, hereafter ClCNAn2- anilate, and LnIII ions (Tb and Eu) are reported. Compounds 1 and 2, formulated as Ln2(ClCNAn)3(DMSO)6 (LnIII = Tb, 1; Eu, 2), and their related intermediates 1' and 2', formulated as Ln2(ClCNAn)3(H2O)x·yH2O (x + y likely = 12, Ln = Tb, 1'; and Eu, 2'), were prepared by a conventional one-pot reaction (the latter) and recrystallized from DMSO solvent (the former). Polyhydrated intermediates 1' and 2' show very similar XRPD patterns, while, despite their common stoichiometry, 1 and 2 are not isostructural. Compound 1 consists of a 2D coordination framework of 3,6 topology, where [Tb(DMSO)3]III moieties are bridged by three bis-chelating ClCNAn2- ligands, forming distorted hexagons. Ultrathin nanosheets of 1 were obtained by exfoliation via the liquid-assisted sonication method and characterized by atomic force microscopy, confirming the 2D nature of 1. The crystal structure of 2, still showing the presence of 2D sheets with a "hexagonal" mesh and a common (3,6) connectivity, is based onto flat, non-corrugated slabs. Indeed, at a larger scale, the different "rectangular tiles" show clear roofing in 1, which is totally absent in 2. The magnetic behavior of 1 very likely indicates depopulation of the highest crystal-field levels, as expected for TbIII compounds.

TAMOF-1 as a Versatile and Predictable Chiral Stationary Phase for the Resolution of Racemic Mixtures.

Metal-organic frameworks (MOFs) have become promising materials for multiple applications due to their controlled dimensionality and tunable properties. The incorporation of chirality into their frameworks opens new strategies for chiral separation, a key technology in the pharmaceutical industry as each enantiomer of a racemic drug must be isolated. Here, we describe the use of a combination of computational modeling and experiments to demonstrate that high-performance liquid chromatography (HPLC) columns packed with TAMOF-1 as the chiral stationary phase are efficient, versatile, robust, and reusable with a wide array of mobile phases (polar and non-polar). As proof of concept, in this article, we report the resolution with TAMOF-1 HPLC columns of nine racemic mixtures with different molecular sizes, geometries, and functional groups. Initial in silico studies allowed us to predict plausible separations in chiral compounds from different families, including terpenes, calcium channel blockers, or P-stereogenic compounds. The experimental data confirmed the validity of the models and the robust performance of TAMOF-1 columns. The added value of in silico screening is an unprecedented achievement in chiral chromatography.

Synthesis and characterization of highly diluted polyanionic iron(II) spin crossover systems.

Spin crossover (SCO) complexes, through their reversible spin transition under external stimuli, can work as switchable memory materials. Here, we present a protocol for the synthesis and characterization of a specific polyanionic iron SCO complex and its diluted systems. We describe steps for its synthesis and the determination of crystallographic structure of the SCO complex in diluted systems. We then detail a range of spectroscopic and magnetic techniques employed to monitor the spin state of the SCO complex in both diluted solid- and liquid-state systems. For complete details on the use and execution of this protocol, please refer to Galán-Mascaros et al.1.

Manipulating Intermetallic Charge Transfer for Switchable External Stimulus-Enhanced Water Oxidation Electrocatalysis.

Electrocatalytic processes involving the oxygen evolution reaction (OER) present a kinetic bottleneck due to the existence of linear-scaling relationships, which bind the energies of the different intermediates in the mechanism limiting optimization. Here, we offer a way to break these scaling relationships and enhance the electrocatalytic activity of a Co-Fe Prussian blue modified electrode in OER by applying external stimuli. Improvements of ≈11 % and ≈57 % were achieved under magnetic field (0.2 T) and light irradiation (100 mW cm-2 ), respectively, when working at fixed overpotential, η=0.6 V at pH 7. The observed enhancements strongly tie in with the intermetallic charge transfer (IMCT) intensity between Fe and Co sites. Density Functional Theory simulations suggest that tuning the IMCT can lead to a change of the OER mechanism to an external stimuli-sensitive spin crossover-based pathway, which opens the way for switchable electrocatalytic devices.

A quantum spin liquid candidate isolated in a two-dimensional CoIIRhIII bimetallic oxalate network.

A quantum spin liquid (QSL) is an elusive state of matter characterized by the absence of long-range magnetic order, even at zero temperature, and by the presence of exotic quasiparticle excitations. In spite of their relevance for quantum communication, topological quantum computation and the understanding of strongly correlated systems, like high-temperature superconductors, the unequivocal experimental identification of materials behaving as QSLs remains challenging. Here, we present a novel 2D heterometallic oxalate complex formed by high-spin Co(ii) ions alternating with diamagnetic Rh(iii) in a honeycomb lattice. This complex meets the key requirements to become a QSL: a spin ½ ground state for Co(ii), determined by spin-orbit coupling and crystal field, a magnetically-frustrated triangular lattice due to the presence of antiferromagnetic correlations, strongly suppressed direct exchange interactions and the presence of equivalent interfering superexchange paths between Co centres. A combination of electronic paramagnetic resonance, specific heat and ac magnetic susceptibility measurements in a wide range of frequencies and temperatures shows the presence of strong antiferromagnetic correlations concomitant with no signs of magnetic ordering down to 15 mK. These results show that bimetallic oxalates are appealing QSL candidates as well as versatile systems to chemically fine tune key aspects of a QSL, like magnetic frustration and superexchange path geometries.

Separation of Volatile Organic Compounds in TAMOF-1.

Separation of volatile organic compounds is one of the most studied processes in industry. TAMOF-1 is a homochiral metal-organic framework with a crystalline network of interconnected ≈1 nm channels and has high thermal and chemical stability. Thanks to these features, it can resolve racemic mixtures of chiral drugs as a chiral stationary phase in chromatography. Interestingly, the particular shape and size of its channels, along with the presence of metallic centers and functional groups, allow establishing weak but significant interactions with guest molecules. This opens interesting possibilities not only to resolve racemates but also to separate other organic mixtures, such as saturated/unsaturated and/or linear/branched molecules. In search of these applications, we have studied the separation of volatile organic compounds in TAMOF-1. Monte Carlo simulations in the grand-canonical ensemble have been carried out to evaluate the separation of the selected molecules. Our results predict that TAMOF-1 is able to separate xylene isomers, hexane isomers, and benzene-cyclohexane mixtures. Experimental breakthrough analysis in the gas phase and also in the liquid phase confirms these predictions. Beds of TAMOF-1 are able to recognize the substitution in xylenes and the branching in hexanes, yielding excellent separation and reproducibility, thanks to the chemical and mechanical features of this material.

Sustainable oxygen evolution electrocatalysis in aqueous 1 M H2SO4 with earth abundant nanostructured Co3O4.

Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) able to work in acidic working conditions are elusive. While many first-row transition metal oxides are competitive in alkaline media, most of them just dissolve or become inactive at high proton concentrations where hydrogen evolution is preferred. Only noble-metal catalysts, such as IrO2, are fast and stable enough in acidic media. Herein, we report the excellent activity and long-term stability of Co3O4-based anodes in 1 M H2SO4 (pH 0.1) when processed in a partially hydrophobic carbon-based protecting matrix. These Co3O4@C composites reliably drive O2 evolution a 10 mA cm-2 current density for >40 h without appearance of performance fatigue, successfully passing benchmarking protocols without incorporating noble metals. Our strategy opens an alternative venue towards fast, energy efficient acid-media water oxidation electrodes.

Lowering the Water Oxidation Overpotential by Spin-Crossover in Cobalt Hexacyanoferrate.

The oxygen evolution reaction (OER) is limited by the inherent linear scaling relationships of its reaction intermediates. Manipulating the spin configuration of the water oxidation intermediates allows us to overcome these constraints. Cobalt hexacyanoferrate (CoFe-PB) is an efficient and robust water oxidation catalyst and further known as a magnetic switch. Its versatile electronic structure renders it a potential candidate for magnetic tuning of the OER. Herein, we used first-principles density functional theory calculations to describe the OER on two different CoFe-PB model systems and evaluated the possibility for spin-crossover (SCO) of their resting states. We show that SCO during OER can significantly lower the overpotential by 0.7 V, leading to an overpotential of around 0.3 V, which is in agreement with the experimentally measured value. Applying an external potential >1.5 V vs SHE, the SCO-assisted pathway becomes largely favored and most likely the predominant reaction pathway.

Synergic Bistability between Spin Transition and Fluorescence in Polyfluorene Composites with Spin Crossover Polymers.

In recent years, several examples of materials combining the molecular bistability of spin crossover (SC) and fluorescent moieties have flourished in the literature. Fluorescence is a sensitive probe, and SC may provide modulation of the signal, thus affording systems in which physicochemical changes in the environment of the SC centers could be effectively detected. On the contrary, organic semiconductor polymers are of great interest and, furthermore, have been successfully applied in different optoelectronic devices, such as transistors, solar cells, and light-emitting devices. Herein, we report on the fabrication of composites comprising a fluorescent, organic semiconductor polymer (polyfluorene) and a spin crossover compound, an Fe(II)-triazole coordination polymer. A strong synergy was observed between the spin transition of the Fe(II) compound and variations in the fluorescence of the organic polymer. The fluorescence modulation was shown to be reversible, with an increase of ≤20% with respect to the original value.

Crystal Structure and Magnetic Properties of Trinuclear Transition Metal Complexes (MnII, CoII, NiII and CuII) with Bridging Sulfonate-Functionalized 1,2,4-Triazole Derivatives.

Here we present the synthesis, structure and magnetic properties of complexes of general formula (Mn)(Me2NH2)4][Mn3(µ-L)6(H2O)6] and (Me2NH2)6[M3(µ-L)6(H2O)6] (M = CoII, NiII and CuII); L-2 = 4-(1,2,4-triazol-4-yl) ethanedisulfonate). The trinuclear polyanions were isolated as dimethylammonium salts, and their crystal structures determined by single crystal and powder X-ray diffraction data. The polyanionic part of these salts have the same molecular structure, which consists of a linear array of metal(II) ions linked by triple N1-N2-triazole bridges. In turn, the composition and crystal packing of the MnII salt differs from the rest of the complexes (with six dimethyl ammonia as countercations) in containing one Mn+2 and four dimethyl ammonia as countercations. Magnetic data indicate dominant intramolecular antiferromagnetic interactions stabilizing a paramagnetic ground state. Susceptibility data have been successfully modeled with a simple isotropic Hamiltonian for a centrosymmetric linear trimer, H = -2J (S1S2 + S2S3) with super-exchange parameters J = -0.4 K for MnII, -7.5 K for NiII and -45 K for CuII complex. The magnetic properties of these complexes and their easy processing opens unique possibilities for their incorporation as magnetic molecular probes into such hybrid materials as magnetic/conducting multifunctional materials or as dopant for organic conducting polymers.

Bifunctional Oxygen Electrocatalysis on Mixed Metal Phthalocyanine-Modified Carbon Nanotubes Prepared via Pyrolysis.

Non-precious-metal catalysts are promising alternatives for Pt-based cathode materials in low-temperature fuel cells, which is of great environmental importance. Here, we have investigated the bifunctional electrocatalytic activity toward the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) of mixed metal (FeNi; FeMn; FeCo) phthalocyanine-modified multiwalled carbon nanotubes (MWCNTs) prepared by a simple pyrolysis method. Among the bimetallic catalysts containing nitrogen derived from corresponding metal phthalocyanines, we report the excellent ORR activity of FeCoN-MWCNT and FeMnN-MWCNT catalysts with the ORR onset potential of 0.93 V and FeNiN-MWCNT catalyst for the OER having EOER = 1.58 V at 10 mA cm-2. The surface morphology, structure, and elemental composition of the prepared catalysts were examined with scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The FeCoN-MWCNT and FeMnN-MWCNT catalysts were prepared as cathodes and tested in anion-exchange membrane fuel cells (AEMFCs). Both catalysts displayed remarkable AEMFC performance with a peak power density as high as 692 mW cm-2 for FeCoN-MWCNT.

Benchmarking Catalysts for Formic Acid/Formate Electrooxidation.

Energy production and consumption without the use of fossil fuels are amongst the biggest challenges currently facing humankind and the scientific community. Huge efforts have been invested in creating technologies that enable closed carbon or carbon neutral fuel cycles, limiting CO2 emissions into the atmosphere. Formic acid/formate (FA) has attracted intense interest as a liquid fuel over the last half century, giving rise to a plethora of studies on catalysts for its efficient electrocatalytic oxidation for usage in fuel cells. However, new catalysts and catalytic systems are often difficult to compare because of the variability in conditions and catalyst parameters examined. In this review, we discuss the extensive literature on FA electrooxidation using platinum, palladium and non-platinum group metal-based catalysts, the conditions typically employed in formate electrooxidation and the main electrochemical parameters for the comparison of anodic electrocatalysts to be applied in a FA fuel cell. We focused on the electrocatalytic performance in terms of onset potential and peak current density obtained during cyclic voltammetry measurements and on catalyst stability. Moreover, we handpicked a list of the most relevant examples that can be used for benchmarking and referencing future developments in the field.

Understanding polyoxometalates as water oxidation catalysts through iron vs. cobalt reactivity.

Cobalt polyoxometalates (Co-POMs) have emerged as promising water oxidation catalysts (WOCs), with the added advantage of their molecular nature despite being metal oxide fragments. In comparison with metal oxides, that do not offer well-defined active surfaces, POMs have a controlled, discrete structure that allows for precise correlations between experiment and computational analyses. Thus, beyond highly active WOCs, POMs are also model systems to gain deeper mechanistic understanding on the oxygen evolution reaction (OER). The tetracobalt Weakley sandwich [CoII 4(H2O)2(B-α-PW9O34)2]10- (Co4-WS) has been one of the most extensively studied. We have compared its activity with that of the iron analog [FeIII 4(H2O)2(B-α-PW9O34)2]6- (Fe4-WS) looking for the electronic effects determining their activity. Furthermore, the effect of POM nuclearity was also investigated by comparison with the iron- and cobalt-monosubstituted Keggin clusters. Electrocatalytic experiments employing solid state electrodes containing the POMs and the corresponding computational calculations demonstrate that CoII-POMs display better WOC activity than the FeIII derivatives. Moreover, the activity of POMs is less influenced by their nuclearity, thus Weakley sandwich moieties show slightly improved WOC characteristics than Keggin clusters. In good agreement with the experimental data, computational methods, including pK a values, confirm that the resting state for Fe-POMs in neutral media corresponds to the S1 (FeIII-OH) species. Overall, the proposed reaction mechanism for Fe4-WS is analogous to that found for Co4-WS, despite their electronic differences. The potential limiting step is a proton-coupled electron transfer event yielding the active S2 (FeIV[double bond, length as m-dash]O) species, which receives a water nucleophilic attack to form the O-O bond. The latter has activation energies slightly higher than those computed for the Co-POMs, in good agreement with experimental observations. These results provide new insights for the accurate understanding of the structure-reactivity relationships of polyoxometalates in particular, and or metal oxides in general, which are of utmost importance for the development of new bottom-up synthetic approaches to design efficient, robust and non-expensive earth-abundant water oxidation catalysts.

Differentiation of Epoxide Enantiomers in the Confined Spaces of an Homochiral Cu(II) Metal-Organic Framework by Kinetic Resolution.

TAMOF-1, a homochiral metal-organic framework (MOF) constructed from an amino acid derivative and Cu(II), was investigated as a heterogeneous catalyst in kinetic resolutions involving the ring opening of styrene oxide with a set of anilines. The branched products generated from the ring opening of styrene oxide with anilines and the unreacted epoxide were obtained with moderately high enantiomeric excesses. The linear product arising from the attack on the non-benzylic position of styrene oxide underwent a second kinetic resolution by reacting with the epoxide, resulting in an amplification of its final enantiomeric excess and a concomitant formation of an array of isomeric aminodiols. Computational studies confirmed the experimental results, providing a deep understanding of the whole process involving the two successive kinetic resolutions. Furthermore, TAMOF-1 activity was conserved after several catalytic cycles. The ring opening of a meso-epoxide with aniline catalyzed by TAMOF-1 was also studied and moderate enantioselectivities were obtained.

Redefining the Mechanistic Scenario of Carbon-Sulfur Nucleophilic Coupling via High-Valent Cp*CoIV Species.

The potential access to CoIV species for promoting transformations that are particularly challenging at CoIII still remains underexploited in the context of Cp*Co-catalyzed C-H functionalization reactions. Herein, we disclose a combined experimental and computational strategy for uncovering the participation of Cp*CoIV species in a Cp*Co-mediated C-S bond-reductive elimination. These studies support the intermediacy of high-valent Cp*Co species in C-H functionalization reactions, under oxidative conditions, when involving nucleophilic coupling partners.