Effects of experimental increase in insulin-like growth factor 1 on feather growth rate, moult intensity and feather quality in a passerine bird.

Moulting is a crucial, yet often overlooked life-history stage in many animals, when they renew their integumental structures. This life-history stage is an energetically demanding somatic growth event that has particular importance in birds because feathers play a crucial role in flight, insulation and communication. Somatic growth processes are regulated by the evolutionarily conserved peptide hormone insulin-like growth factor 1 (IGF-1). However, the role of IGF-1 in feather growth remains unknown. In this study, we captured 41 juvenile free-living bearded reedlings (Panurus biarmicus) that had started their first complete moult and brought them into captivity. Then, we manipulated their circulating IGF-1 levels using poly-(lactic-co-glycolid acid) microparticles (microspheres) that provide a sustained release of IGF-1. The treatment increased IGF-1 levels but did not affect the feather growth rate. However, 2 weeks after the treatment, birds in the increased IGF-1 group were moulting more feathers simultaneously than the controls and were at a more advanced stage of moult. Birds with experimentally increased IGF-1 levels had better quality feathers (measured by a lower number of fault bars) than the controls. These results suggest that an increase in IGF-1 does not speed up feather growth, but may alter moult intensity by initiating the renewal of several feathers simultaneously. This may shorten the overall moulting time but may imply costs in terms of IGF-1-induced oxidative stress.

PLGA-particle vaccine carrying TLR3/RIG-I ligand Riboxxim synergizes with immune checkpoint blockade for effective anti-cancer immunotherapy.

With emerging supremacy, cancer immunotherapy has evolved as a promising therapeutic modality compared to conventional antitumor therapies. Cancer immunotherapy composed of biodegradable poly(lactic-co-glycolic acid) (PLGA) particles containing antigens and toll-like receptor ligands induces vigorous antitumor immune responses in vivo. Here, we demonstrate the supreme adjuvant effect of the recently developed and pharmaceutically defined double-stranded (ds)RNA adjuvant Riboxxim especially when incorporated into PLGA particles. Encapsulation of Riboxxim together with antigens potently activates murine and human dendritic cells, and elevated tumor-specific CD8+ T cell responses are superior to those obtained using classical dsRNA analogues. This PLGA particle vaccine affords primary tumor growth retardation, prevention of metastases, and prolonged survival in preclinical tumor models. Its advantageous therapeutic potency was further enhanced by immune checkpoint blockade that resulted in reinvigoration of cytotoxic T lymphocyte responses and tumor ablation. Thus, combining immune checkpoint blockade with immunotherapy based on Riboxxim-bearing PLGA particles strongly increases its efficacy.

Photochemical internalization (PCI)-mediated activation of CD8 T cells involves antigen uptake and CCR7-mediated transport by migratory dendritic cells to draining lymph nodes.

Antigen cross-presentation to cytotoxic CD8+ T cells is crucial for the induction of anti-tumor and anti-viral immune responses. Recently, co-encapsulation of photosensitizers and antigens into microspheres and subsequent photochemical internalization (PCI) of antigens in antigen presenting cells has emerged as a promising new strategy for inducing antigen-specific CD8+ T cell responses in vitro and in vivo. However, the exact cellular mechanisms have hardly been investigated in vivo, i.e., which cell types take up antigen-loaded microspheres at the site of injection, or in which secondary lymphoid organ does T cell priming occur? We used spray-dried poly(lactic-co-glycolic acid) (PLGA) microspheres loaded with ovalbumin and the photosensitizer tetraphenyl chlorine disulfonate (TPCS2a) to investigate these processes in vivo. Intravital microscopy and flow cytometric analysis of the murine ear skin revealed that dendritic cells (DCs) take up PLGA microspheres in peripheral tissues. Illumination then caused photoactivation of TPCS2a and induced local tissue inflammation that enhanced CCR7-dependent migration of microsphere-containing DCs to tissue-draining lymph nodes (LNs), i.e., the site of CD8+ T cell priming. The results contribute to a better understanding of the functional mechanism of PCI-mediated vaccination and highlight the importance of an active transport of vaccine microspheres by antigen presenting cells to draining LNs.

Combined Photosensitization and Vaccination Enable CD8 T-Cell Immunity and Tumor Suppression Independent of CD4 T-Cell Help.

Cytotoxic T lymphocytes (CTLs) are key players in fighting cancer, and their induction is a major focus in the design of therapeutic vaccines. Yet, therapeutic vaccine efficacy is limited, in part due to the suboptimal vaccine processing by antigen-presenting cells (APCs). Such processing typically takes place via the MHC class II pathway for CD4 T-cell activation and MHC class I pathway for activation of CD8 CTLs. We show that a combination of skin photochemical treatment and immunization, so-called photochemical internalization (PCI) facilitated CTL activation due to the photochemical adjuvant effect induced by photosensitizer, oxygen, and light. Mice were immunized intradermally with antigen and photosensitizer, followed by controlled light exposure. PCI-treated mice showed strong activation of CD8 T cells, with improved IFN-γ production and cytotoxicity, as compared to mice immunized without parallel PCI treatment. Surprisingly, the CD8 T-cell effector functions were not impaired in MHC class II- or CD4 T-cell-deficient mice. Moreover, PCI-based vaccination caused tumor regression independent of MHC class II or CD4 T cells presence in melanoma bearing mice. Together, the data demonstrate that PCI can act as a powerful adjuvant in cancer vaccines, even in hosts with impaired T-helper functions.

PLGA-microencapsulation protects Salmonella typhi outer membrane proteins from acidic degradation and increases their mucosal immunogenicity.

Salmonella (S.) enterica infections are an important global health problem with more than 20 million individuals suffering from enteric fever annually and more than 200,000 lethal cases per year. Although enteric fever can be treated appropriately with antibiotics, an increasing number of antibiotic resistant Salmonella strains is detected. While two vaccines against typhoid fever are currently on the market, their availability in subtropical endemic areas is limited because these products need to be kept in uninterrupted cold chains. Hence, the development of a thermally stable vaccine that induces mucosal immune responses would greatly improve human health in endemic areas. Here, we have combined the high structural stability of Salmonella typhi outer membrane proteins (porins) with their microencapsulation into poly(lactic-co-glycolic acid) (PLGA) to generate an orally applicable vaccine. Encapsulated porins were protected from acidic degradation and exhibited enhanced immunogenicity following oral administration. In particular, the vaccine elicited strong S. typhi-specific B cell responses in Peyer's patches and mesenteric lymph nodes. In sum, PLGA microencapsulation substantially improved the efficacy of oral vaccination against S. typhi.

Cytosolic Delivery of Liposomal Vaccines by Means of the Concomitant Photosensitization of Phagosomes.

One of the greatest pharmaceutical challenges in vaccinology is the delivery of antigens to the cytosol of antigen-presenting cells (APCs) in order to allow for the stimulation of major histocompatibility complex (MHC) class I-restricted CD8(+) T-cell responses, which may act on intracellular infections or cancer. Recently, we described a novel method for cytotoxic T-lymphocyte (CTL) vaccination by combining antigens with a photosensitizer and light for cytosolic antigen delivery. The goal of the current project was to test this immunization method with particle-based formulations. Liposomes were prepared from dipalmitoylphosphatidylcholine and cholesterol, and the antigen ovalbumin (OVA) or the photosensitizer tetraphenyl chlorine disulfonate (TPCS2a) was separately encapsulated. C57BL/6 mice were immunized intradermally with OVA liposomes or a combination of OVA and TPCS2a liposomes, and light was applied the next day for activation of the photosensitizer resulting in cytosolic release of antigen from phagosomes. Immune responses were tested both after a prime only regime and after a prime-boost scheme with a repeat immunization 2 weeks post priming. Antigen-specific CD8(+) T-cell responses and antibody responses were analyzed ex vivo by flow cytometry and ELISA methods. The physicochemical stability of liposomes upon storage and light exposure was analyzed in vitro. Immunization with both TPCS2a- and OVA-containing liposomes greatly improved CD8(+) T-cell responses as compared to immunization without TPCS2a and as measured by proliferation in vivo and cytokine secretion ex vivo. In contrast, OVA-specific antibody responses (IgG1 and IgG2c) were reduced after immunization with TPCS2a-containing liposomes. The liposomal formulation protected the photosensitizer from light-induced inactivation during storage. In conclusion, the photosensitizer TPCS2a was successfully formulated in liposomes and enabled a shift from MHC class II to MHC class I antigen processing and presentation for stimulation of strong CD8(+) T-cell responses. Therefore, photosensitive particulate vaccines may have the potential to add to current vaccine practice a new method of vaccination that, as opposed to current vaccines, can stimulate strong CD8(+) T-cell responses.

Photosensitizer and Light Pave the Way for Cytosolic Targeting and Generation of Cytosolic CD8 T Cells Using PLGA Vaccine Particles.

The generation of CTLs is crucial in the immunological fight against cancer and many infectious diseases. To achieve this, vaccine Ags need to be targeted to the cytosol of dendritic cells, which can activate CD8 T cells via MHC class I (MHCI). Therefore, such targeting has become one of the major objectives of vaccine research. In this study, we aimed to bypass the unwanted and default MHC class II Ag presentation and trigger MHCI presentation by using a photosensitizer that, upon light activation, would facilitate cytosolic targeting of codelivered Ag. Poly(lactide-co-glycolide) microparticles ∼1 µm size were loaded with OVA and the photosensitizer tetraphenyl chlorine disulphonate (TPCS2a) and administered intradermally in mice, which were illuminated 1 d later for activation of the photosensitizer. Immunization in the presence of TPCS2a significantly increased activation of CD8 T cells compared with immunization without TPCS2a and as measured by CD8 T cell proliferation, production of proinflammatory IFN-γ, TNF-α, and IL-2, and prevention of tumor growth. Cytotoxicity was demonstrated by granzyme B production in vitro and by in vivo killing of CFSE-labeled targets. CD4-dependent Ab responses were abrogated in mice immunized with TPCS2a-containing particles, suggesting that photosensitization facilitated a shift from default MHC class II toward MHCI Ag presentation. Hence, vaccine particles with Ag and photosensitizers proved an effective vehicle or adjuvant for stimulation of CTLs, and they may find potential application in therapeutic cancer vaccination and in prophylactic and therapeutic vaccination against intracellular infections.

Impact of IGF-I release kinetics on bone healing: a preliminary study in sheep.

Spatiotemporal release of growth factors from a delivery device can profoundly affect the efficacy of bone growth induction. Here, we report on a delivery platform based on the encapsulation of insulin-like growth factor I (IGF-I) in different poly(D,L-lactide) (PLA) and poly(D,L-lactide-co-glycolide) (PLGA) microsphere (MS) formulations to control IGF-I release kinetics. In vitro IGF-I release profiles generally exhibited an initial burst (14-36% of total IGF-I content), which was followed by a more or less pronounced dormant phase with little release (2 to 34 days), and finally, a third phase of re-increased IGF-I release. The osteoinductive potential of these different IGF-I PL(G)A MS formulations was tested in studies using 8-mm metaphyseal drill hole bone defects in sheep. Histomorphometric analysis at 3 and 6 weeks after surgery showed that new bone formation was improved in the defects locally treated with IGF-I PL(G)A MS (n=5) as compared to defects filled with IGF-I-free PL(G)A MS (n=4). The extent of new bone formation was affected by the particular release kinetics, although a definitive relationship was not evident. Local administration of IGF-I resulted in down-regulation of inflammatory marker genes in all IGF-I treated defects. The over-expression of growth factor genes in response to IGF-I delivery was restricted to formulations that produced osteogenic responses. These experiments demonstrate the osteoinductive potential of sustained IGF-I delivery and show the importance of delivery kinetics for successful IGF-I-based therapies.

Nerve conduit scaffolds for discrete delivery of two neurotrophic factors.

Axonal repair and regeneration remain critical due to lack of appropriate delivery systems for efficient release of neurotrophic factors (NTFs). Recently, we have demonstrated the synergistic activity of nerve growth factor (NGF) and glial cell line-derived neurotrophic factor (GDNF) on axonal regeneration. Combined delivery of GDNF and NGF with individually controlled release kinetics may be crucial for exploiting their synergistic action on axonal elongation in animals. For engineering discrete NTF release kinetics, we have developed several nerve conduits (NCs) using collagen (Col) and silk fibroin (SF); the NC were made of Col or SF alone, or of Col and SF layers, or of Col/SF blends, all loaded with GDNF and NGF. All NC types provided sustained combined release of NGF and GDNF over 28 days. NC made of combinations of Col and SF showed reduced burst and more sustained dual release of GDNF and NGF. SF/Col-based NC scaffolds provide an adaptable delivery system for growth factors and hold potential for nerve regeneration and possibly for other tissue engineering applications.

Formulation and drying of miconazole and itraconazole nanosuspensions.

Miconazole and itraconazole possess adequate membrane permeability, but only slight water solubility, which limits their bioavailability and antifungal effect. To increase their dissolution rate, the compounds were nanoground by media milling to produce nanosuspensions with mean particle size of approximately 210 nm and stabilized with sodium dodecylsulfate (SDS) in combinations with either cellulose ethers (HPC or HPMC) or poloxamers. During storage for 3 months at 25 °C, HPC/SDS stabilized more efficiently miconazole nanoparticles, while poloxamer 407/SDS performed better with itraconazole nanosuspensions. The stabilizing efficiency of the excipients was explained by physical-chemical drug-excipients interactions. The HPC/SDS-stabilized nanosuspensions were spray-dried or freeze-dried with and without the matrix formers mannitol or microcrystalline cellulose (MCC). In absence of matrix former, itraconazole particles agglomerated more extensively than miconazole particles, resulting in a low dissolution rate. Dissolution of the spray- or freeze-dried miconazole nanosuspension was enhanced in presence of mannitol or MCC (drug substance:excipient ratio of 1:1, w/w), as compared to the coarse drug suspension (twice the amount dissolved after 10 and 20 min). Spray-drying itraconazole nanosuspension in presence of mannitol or MCC also yielded fast dissolution (60% dissolved in less than 10 min as compared to 30-45 min with the coarse suspension). Freeze-dried itraconazole nanosuspensions did generally not dissolve substantially faster than freeze-dried coarse suspension. In conclusion, we were able to process miconazole and itraconazole successfully and under similar conditions into dry nanoparticulate drug products with enhanced in vitro performance.

Simultaneous quantification of polymeric and surface active stabilizers of nanosuspensions by using near-infrared spectroscopy.

Nanosuspension technology is an attractive approach for the formulation and solubility enhancement of poorly water-soluble drug compounds. The technology requires adequate excipients for stabilizing the suspensions during nanogrinding and storage. This study aimed at establishing a near-infrared (NIR) method for assaying simultaneously the two nanoparticle stabilizers, sodium dodecyl sulphate (SDS) and hydroxypropylcellulose (HPC), in miconazole nanosuspensions. Second derivative of NIR signals was used to establish calibration curves in concentration ranges of interest of SDS (0.03-0.3%) and HPC (0.75-7.5%). The suitability and applicability of the NIR method was verified by evaluating the linearity, accuracy, precision, and specificity of the obtained data. The method was then used to quantify indirectly the amount of SDS and HPC adsorbed onto miconazole nanoparticles. Within the concentration range of interest, SDS adsorption increased up to 122 µg/m(2) (4.2 × 10(-7) mol/m(2)) with increasing SDS concentration, and HPC adsorption was in the range of 800-1000 µg/m(2) (21-27 × 10(-7) mol/m(2)) for nanosuspensions containing nominally 5% HPC and 12.5% or 20% miconazole. Interestingly, some of the adsorbed HPC was displaced upon increase of SDS concentration and adsorption. The data were also confirmed by surface tension measurements of aqueous solutions of SDS and HPC and nanosuspension supernatants. The availability of a fast and nondestructive method for quantifying simultaneously the adsorption of two stabilizers onto nanoground particles may not only speed up nanosuspension development, but also provide insight into the mechanisms of nanoparticle stabilization regarding competitive adsorption and electrostatic versus steric stabilization.

Growth factor delivery systems and repair strategies for damaged peripheral nerves.

Artificial nerve conduits (NCs) are, in certain cases, instrumental for repairing damaged peripheral nerves, although therapeutic efficacy remains often suboptimal. Considerable efforts have been made to improve the therapeutic performance of NCs. This article reviews recent developments in NC-technology for peripheral nerve regeneration with a main focus on growth factors delivery systems and repair strategies. Commonly used materials for NC fabrication include collagen, silk fibroin, and biodegradable aliphatic polyesters. The basic NC structure, i.e., a hollow tube, can be manufactured by diverse methods: spinning mandrel technology, sheet rolling, injection-molding, freeze-drying, and electro-spinning. Polymeric and cellular delivery systems for growth factors can be integrated in the NC wall or within luminal structures such as gels, fibers, or biological materials providing binding affinity for the bioactive compounds. NCs with sustained growth factor delivery generally improve significantly the axonal outgrowth in nerve defect models, although restoration of sensory and motor functions remains inferior to that achieved with autologous nerve grafts. To improve therapeutic outcomes, further biofunctionalization of NCs will be needed, i.e., adjusting degradation kinetics of NC scaffolding to be compatible with axonal regeneration; delivering multiple growth factors at individually optimized kinetics; incorporating modality specific glial cells and furnishing NCs with guiding nanostructures.

Polyelectrolyte LbL microcapsules versus PLGA microparticles for immunization with a protein antigen.

The transition from organism-based traditional vaccines to the use of safer subunit vaccines has implemented the use of adjuvants to enhance immunogenicity. This study compares the potential of two types of polymeric microparticles as delivery systems for the model antigen ovalbumin. The delivery systems encompassed polyelectrolyte microcapsules, assembled via Layer-by-Layer technology, and PLGA microparticles fabricated by spray-drying. Mice were immunized subcutaneously either by a single injection or by two injections separated by four weeks with an equivalent dose of the OVA-loaded particles. Both particulate formulations mediated high, long-term IgG(1) responses whereas the IgG(2c) titers remained low. Additionally, Th1 and Th2 phenotype immune responses against OVA were assessed by quantifying the production of cytokines in CD4+ T-cells derived from the spleens of immunized mice at 6 months after the first injection. Immunization with particulate formulations led to significantly increased IL-2, IL-4, IL-10 and IFN-γ production by splenic CD4+ T-cells compared to control animals. LbL microcapsules and PLGA microparticles generated strong immune responses in vivo, characterized by a mixed Th1/Th2 type response with predominance of Th2 immunity. Both particulate formulations elicited a comparable type of immune response and appear to be promising for antigen delivery.

Encapsulation of antigen in poly(D,L-lactide-co-glycolide) microspheres protects from harmful effects of γ-irradiation as assessed in mice.

During the last two decades, synthetic polymers such as poly(lactide-co-glycolide) (PLGA) have been investigated for the development of nano- or microparticles as adjuvants or antigen vehicles. To enable transfer of this technology to human settings, the issue of sterilisation is of central importance. Since most polymers are heat-sensitive, sterilisation of polymeric microspheres for parenteral administration is assured either by costly and laborious aseptical preparation or the more preferred γ-irradiation. Many studies have investigated the effect of γ-irradiation on various physiochemical properties of the microspheres, but investigations on immunological effects are rare. We prepared poly(lactide-co-glycolide) (PLGA) microspheres containing ovalbumin (OVA) and tested the effect of γ-irradiation on the various immunological properties in mice. For reference, OVA was γ-irradiated and tested equivalently. The ability of encapsulated or non-encapsulated OVA to trigger activation of dendritic cells (DCs) was not affected by irradiation. However, while γ-irradiation of free OVA strongly influenced the antigen presentation, encapsulated OVA was not affected by irradiation. γ-Irradiation of OVA also reduced the immunogenicity in mice with regard to OVA-specific IgG1 production. In contrast, the antibody and the T-cell responses in mice immunised with PLGA-encapsulated OVA were similar irrespective of the γ-irradiation status. Hence, encapsulation of antigen into PLGA microspheres protects antigen from the potential detrimental effect of γ-irradiation leading to inactivation or altered immunogenicity. Sterilisation by γ-irradiation therefore enables a cost-effective production of PLGA-based antigen-delivery systems as compared to the more laborious and expensive aseptical production of such vaccines.

Particulate vaccines: on the quest for optimal delivery and immune response.

Subunit vaccines offer a safer alternative to traditional organism-based vaccines, but their immunogenicity is impaired. This hurdle might be overcome by the use of micro- and nanodelivery systems carrying the antigen(s). This review discusses the rationale for the use of particulate vaccines and provides an overview of antigen-delivery vehicles currently under investigation. It further highlights the cellular uptake, antigen processing and the presentation by antigen-presenting cells because these processes are partially governed by particle characteristics and eventually determine the immunological outcome. Finally, we address the attractive concept of concomitant delivery of antigens and immunopotentiators. The condensed knowledge could be an asset for rationally designing antigen-delivery vehicles to obtain safe and efficacious vaccines.

Tumor eradication by immunotherapy with biodegradable PLGA microspheres--an alternative to incomplete Freund's adjuvant.

In experimental tumor immunotherapy, incomplete Freund's adjuvant (IFA) has been considered as the "gold standard" for T-cell vaccination in mice and humans in spite of its considerable adverse effects. Recently, we succeeded in eliciting strong CTL responses in mice after vaccination with biodegradable poly(D,L-lactide-co-glycolide) (PLGA) microspheres (MS). In our study, we compared the immune response to IFA and PLGA-MS containing ovalbumin (OVA) and CpG-oligodeoxynucleotide (MS-OVA/CpG) or we used a mixture of MS-OVA/CpG and MS-polyI:C. A single vaccination with MS-OVA/CpG elicited long-lasting titers of IgG1 and IgG2a, but only low IgE titers, and also the T-cell response was biased toward Th(1) differentiation. Antigen presentation to CD4(+) and CD8(+) cells and activation of a cytotoxic T-cell response in mice vaccinated with PLGA-MS and IFA lasted for over 3 weeks. Preconditioning of the injection site with TNF-α and heterologous prime-boost regimen further enhanced the cytotoxic response. PLGA-MS were as efficient or superior to IFA in eradication of preexisting tumors and suppression of lung metastases. Taken together, PLGA-MS are well-defined, biodegradable and clinically compatible antigen carrier systems that compare favorably with IFA in their efficacy of tumor immunotherapy in mouse models and hence deserve to be tested for their effectiveness against human malignant diseases.

Effect of controlled co-delivery of synergistic neurotrophic factors on early nerve regeneration in rats.

Present interventions to repair severed peripheral nerves provide slow and poor early axonal regeneration, which may cause unsatisfactory functional reinnervation. To improve early axonal regeneration in a 10 mm rat sciatic nerve gap model, we developed collagen nerve conduits loaded with the synergistically acting glial cell line-derived neurotrophic factor (GDNF) and nerve growth factor (NGF). For controlling the concomitant GDNF and NGF release, the collagen tubes were cross-linked by a dehydro-thermal treatment (110 degrees C; 20 mbar; 5 days) prior to impregnating the tubes with GDNF and NGF and by coating drug-loaded tubes with layers of poly(lactide-co-glycolide). The conduits made of cross-linked collagen released low initial amounts of GDNF and NGF (2% of both during first 3 days) and enhanced significantly the early (2 weeks) nerve regeneration in terms of axonal outgrowth and Schwann cell migration in a 10 mm rat sciatic nerve gap model, as compared to the conduits made of non-cross-linked collagen releasing higher initial amounts of GDNF and NGF (12-16% within 3 days), or those releasing GDNF alone. The enhancement of early axonal regeneration using controlled co-delivery of multiple synergistic neurotrophic factors is an important requisite for eventually establishing functional connections with the target organ.

Administration routes affect the quality of immune responses: A cross-sectional evaluation of particulate antigen-delivery systems.

Particulate delivery systems such as liposomes and polymeric nano- and microparticles are attracting great interest for developing new vaccines. Materials and formulation properties essential for this purpose have been extensively studied, but relatively little is known about the influence of the administration route of such delivery systems on the type and strength of immune response elicited. Thus, the present study aimed at elucidating the influence on the immune response when of immunising mice by different routes, such as the subcutaneous, intradermal, intramuscular, and intralymphatic routes with ovalbumin-loaded liposomes, N-trimethyl chitosan (TMC) nanoparticles, and poly(lactide-co-glycolide) (PLGA) microparticles, all with and without specifically selected immune-response modifiers. The results showed that the route of administration caused only minor differences in inducing an antibody response of the IgG1 subclass, and any such differences were abolished upon booster immunisation with the various adjuvanted and non-adjuvanted delivery systems. In contrast, the administration route strongly affected both the kinetics and magnitude of the IgG2a response. A single intralymphatic administration of all evaluated delivery systems induced a robust IgG2a response, whereas subcutaneous administration failed to elicit a substantial IgG2a response even after boosting, except with the adjuvanted nanoparticles. The intradermal and intramuscular routes generated intermediate IgG2a titers. The benefit of the intralymphatic administration route for eliciting a Th1-type response was confirmed in terms of IFN-gamma production of isolated and re-stimulated splenocytes from animals previously immunised with adjuvanted and non-adjuvanted liposomes as well as with adjuvanted microparticles. Altogether the results show that the IgG2a associated with Th1-type immune responses are sensitive to the route of administration, whereas IgG1 response associated with Th2-type immune responses were relatively insensitive to the administration route of the particulate delivery systems. The route of administration should therefore be considered when planning and interpreting pre-clinical research or development on vaccine delivery systems.

Miconazole nanosuspensions: Influence of formulation variables on particle size reduction and physical stability.

New drug substances from early development are often poorly water-soluble, which causes poor bioavailability upon peroral administration and hampers drug administration through other routes such as the parenteral or ocular routes. One approach to improve drug solubility and administration flexibility is by wet milling to nanosize. Particle size reduction increases the surface energy which requires adequate stabilization by excipients. In this study, the practically water-insoluble miconazole was nanoground, and a variety of surface active and polymeric excipients were tested for their stabilizing effects. For efficient milling, two preformulation criteria had to be fulfilled: a relatively low contact angle (<70 degrees ) and high dispersibility of the native drug particles in the milling medium. Hydroxypropylcellulose (HPC-LF) in combination with sodium dodecyl sulfate (SDS) stabilized best the miconazole nanosuspensions. A design of experiments was used to achieve drug particle mean sizes of 140-170nm by varying the concentrations of miconazole (5 and 20%, w/w), SDS (0.05 and 0.2%, w/w), and HPC-LF (1.25 and 5%, w/w). Further experiments revealed that minimal 0.0125% SDS and 3.125% HPC-LF were required for miconazole nanogrinding and nanosuspension stabilisation. Storage of the nanosuspensions at 5 degrees C for up to 6 months caused only minor changes, whereas storage at 25 degrees C resulted in particle agglomeration and single crystal growth. Altogether the study showed that excellent wetting of drug particles as well as their electrostatic and steric stabilization by excipients is necessary to produce stable nanosuspensions by nanogrinding.