Quantification and cultivation of Helicobacter pylori (H. pylori) from various urban water environments: A comprehensive analysis of precondition methods and sample characteristics.

Substantial evidence suggests that all types of water, such as drinking water, wastewater, surface water, and groundwater, can be potential sources of Helicobacter pylori (H. pylori) infection. Thus, it is critical to thoroughly investigate all possible preconditioning methods to enhance the recovery of H. pylori, improve the reproducibility of subsequent detection, and optimize the suitability for various water types and different detection purposes. In this study, we proposed and evaluated five distinct preconditioning methods for treating water samples collected from multiple urban water environments, aiming to maximize the quantitative qPCR readouts and achieve effective selective cultivation. According to the experimental results, when using the qPCR technique to examine WWTP influent, effluent, septic tank, and wetland water samples, the significance of having a preliminary cleaning step becomes more evident as it can profoundly influence qPCR detection results. In contrast, the simple, straightforward membrane filtration method could perform best when isolating and culturing H. pylori from all water samples. Upon examining the cultivation and qPCR results obtained from groundwater samples, the presence of infectious H. pylori (potentially other pathogens) in aquifers must represent a pressing environmental emergency demanding immediate attention. Furthermore, we believe groundwater can be used as a medium to reflect the H. pylori prevalence in a highly populated community due to its straightforward analytical matrix, consistent detection performance, and minimal interferences from human activities, temperature, precipitation, and other environmental fluctuations.

Multiple roles of Ca2+ in the interaction of ciprofloxacin with activated sludge: Spectroscopic investigations of extracellular polymeric substances.

Calcium ion is an important cation influencing the binding of recalcitrant organic contaminants with activated sludge during wastewater treatment process, but there is still unknown about its role in amphoteric fluoroquinolones binding. Binding experiments show that Ca2+ markedly inhibited binding of ciprofloxacin (CIP) onto sludge, causing 7-203 times of CIP release. Multi-spectroscopic examinations indicate that tryptophan-like and tyrosine-like proteins in extracellular polymeric substances (EPS) were dominant components for CIP binding by static quenching and forming CIP-proteins complexes. Addition of Ca2+ into EPS and CIP binding systems induced increase of association constants (from 0.024-0.064 to 0.027-0.084 L/µmol) and binding constants (from 0.002-0.039 to 0.012-0.107) and decrease of binding sites number (from 0.893-2.007 to 0.721-1.386). Functional groups of EPS and secondary structure of proteins were remarkably changed upon reactions with CIP and Ca2+. Calcium ion interacted with EPS and CIP binding system in two distinct ways: Ca2+ shielded CO in amide I in EPS for CIP binding, whereas strengthened binding between CIP and functional groups including CO in carboxyl groups in extra-microcolony polymers and OH in extra-cellular polymers by forming ternary complexes. Cation competition for CO in amide I is responsible for Ca2+ induced CIP release from the sludge. Results suggest the highly potential release of CIP from high saline wastewater and cation-conditioned sludge which needs further monitoring and evaluation.

Synthesis of Ni/NiO@MIL-101(Cr) Composite as Novel Anode for Lithium-Ion Battery Application.

The poor conductivity is one of the prime reasons restricted MOFs to be applied in the lithium-ion battery system. For the sake of ameliorate this issue, the Ni/NiO was well loaded on the surface of Cr-based metal organic frameworks (MIL-101) by solution impregnation and in situ reduction method to form Ni/NiO@MIL-101(Cr) composites. The as-synthesized Ni/NiO@MIL-101(Cr) was characterized by X-ray powder diffractions, X-ray photoelectron spectroscopy, field emission scanning electron microscope and transmission electron microscope techniques. When used as anode for LIBs, the Ni/NiO@MIL-101(Cr) composite exhibited high reversible capacity (891 mAh g-1 after 100 cycles at a current density of 200 mA g-1) and stable cycle performance, the coulombic efficiency can maintain in the whole cycle above 95.0%. The reasons for that Ni/NiO@MIL-101(Cr) behaved outstanding electrochemical properties were discussed also. The Ni/NiO@MIL-101(Cr) can be used as promising material for lithium-ion battery application.

Preparation of thermo/redox/pH-stimulative poly(N-isopropylacrylamide-co-N,N'-dimethylaminoethyl methacrylate) nanogels and their DOX release behaviors.

Stimuli-sensitive drug delivery systems show beneficial features of both medical and pharmaceutical fields. In this article, polymeric nanogel P (N-isopropylacrylamide-N,N '-dimethylaminoethyl methacrylate [NIPAM-DMAEMA]) (PND) with pH/redox/thermo-responsivenesses was synthesized by the in situ polymerization of NIPAM and DMAEMA for the controlled release of doxorubicin hydrochloride (DOX) and N,N '-bis(acryloyl)cystamine (BAC) and N,N '-methylenebisacrylamide (MBA) act as the crosslinkers, respectively. The structure, size, and zeta potential of PND-BAC and PND-MBA were further characterized. Moreover, after loading DOX, the encapsulation efficiency and the in vitro release behavior of PND-BAC/DOX and PND-MBA/DOX nanogels were discussed in detail. Compared to PND-MBA NGs, PND-BAC nanogels have redox degradability due to the presence of the crosslinker BAC. After loading DOX, the PND-BAC/DOX nanogel showed a higher encapsulation efficiency (81.6 ± 1.2)% and thermo- and pH-responsiveness as well as redox-responsive in vitro release. These properties together with excellent environmentally sensitive properties make PND-BAC as an attractive candidate for application in drug nanocarriers for the targeted drug delivery of model payloads. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1195-1203, 2019.

Interaction of ciprofloxacin with the activated sludge of the sewage treatment plant.

Interaction of ciprofloxacin with the activated sludge of the sewage treatment plant is of importance for the ciprofloxacin migration and risk control. More than 96.0% ciprofloxacin was removed through the sludge adsorption. The sludge surface charge varied little with ciprofloxacin since most ciprofloxacin was dissociated into the neutral one. No obvious shift was observed for the soluble carbohydrate concentration and composition with the addition of ciprofloxacin, indicating the weak interaction between the carbohydrates and ciprofloxacin. The introduction of ciprofloxacin resulted in a reduction of the soluble protein concentration, a marked increase of the extracellular protein fluorescence intensities, and a dramatic emergence of new extracellular proteins. The alteration of the proteins highlights the strong interaction between the extracellular proteins and ciprofloxacin, and the consequent integration of certain soluble proteins and original unextractable inner layer extracellular proteins into the extractable extracellular proteins. Different types of interactions are suggested to dominate between the extracellular proteins and the differently dissociated ciprofloxacin.