Temperature-Driven Rotation Symmetry-Breaking States in an Atomic Kagome Metal KV3Sb5.

Kagome lattice AV3Sb5 has attracted tremendous interest because it hosts correlated and topological physics. However, an in-depth understanding of the temperature-driven electronic states in AV3Sb5 is elusive. Here we use scanning tunneling microscopy to directly capture the rotational symmetry-breaking effect in KV3Sb5. Through both topography and spectroscopic imaging of defect-free KV3Sb5, we observe a charge density wave (CDW) phase transition from an a0 × a0 atomic lattice to a robust 2a0 × 2a0 superlattice upon cooling the sample to 60 K. An individual Sb-atom vacancy in KV3Sb5 further gives rise to the local Friedel oscillation (FO), visible as periodic charge modulations in spectroscopic maps. The rotational symmetry of the FO tends to break at the temperature lower than 40 K. Moreover, the FO intensity shows an obvious competition against the intensity of the CDW. Our results reveal a tantalizing electronic nematicity in KV3Sb5, highlighting the multiorbital correlation in the kagome lattice framework.

Formation and Manipulation of Diatomic Rotors at the Symmetry-Breaking Surfaces of a Kagome Superconductor.

Construction of diatomic rotors, which is crucial for artificial nanomachines, remains challenging due to surface constraints and limited chemical design. Here we report the construction of diatomic Cr-Cs and Fe-Cs rotors where a Cr or Fe atom switches around a Cs atom at the Sb surface of the newly discovered kagome superconductor CsV3Sb5. The switching rate is controlled by the bias voltage between the rotor and scanning tunneling microscope (STM) tip. The spatial distribution of rates exhibits C2 symmetry, possibly linked to the symmetry-breaking charge orders of CsV3Sb5. We have expanded the rotor construction to include different transition metals (Cr, Fe, V) and alkali metals (Cs, K). Remarkably, designed configurations of rotors are achieved through STM manipulation. Rotor orbits and quantum states are precisely controlled by tuning the inter-rotor distance. Our findings establish a novel platform for the controlled fabrication of atomic motors on symmetry-breaking quantum materials, paving the way for advanced nanoscale devices.

Room­Temperature Antisymmetric Magnetoresistance in van der Waals Ferromagnet Fe3GaTe2 Nanosheets.

Van der Waals (vdW) ferromagnetic materials have emerged as a promising platform for the development of 2D spintronic devices. However, studies to date are restricted to vdW ferromagnetic materials with low Curie temperature (Tc) and small magnetic anisotropy. Here, a chemical vapor transport method is developed to synthesize a high-quality room-temperature ferromagnet, Fe3GaTe2 (c-Fe3GaTe2), which boasts a high Tc = 356 K and large perpendicular magnetic anisotropy. Due to the planar symmetry breaking, an unconventional room-temperature antisymmetric magnetoresistance (MR) is first observed in c-Fe3GaTe2 devices with step features, manifesting as three distinctive states of high, intermediate, and low resistance with the sweeping magnetic field. Moreover, the modulation of the antisymmetric MR is demonstrated by controlling the height of the surface steps. This work provides new routes to achieve magnetic random storage and logic devices by utilizing the room-temperature thickness-controlled antisymmetric MR and further design room-temperature 2D spintronic devices based on the vdW ferromagnet c-Fe3GaTe2.

Gold-Template-Assisted Mechanical Exfoliation of Large-Area 2D Layers Enables Efficient and Precise Construction of Moiré Superlattices.

Moiré superlattices, consisting of rotationally aligned 2D atomically thin layers, provide a highly novel platform for the study of correlated quantum phenomena. However, reliable and efficient construction of moiré superlattices is challenging because of difficulties to accurately angle-align small exfoliated 2D layers and the need to shun wet-transfer processes. Here, efficient and precise construction of various moiré superlattices is demonstrated by picking up and stacking large-area 2D mono- or few-layer crystals with predetermined crystal axes, made possible by a gold-template-assisted mechanical exfoliation method. The exfoliated 2D layers are semiconductors, superconductors, or magnets and their high quality is confirmed by photoluminescence and Raman spectra and by electrical transport measurements of fabricated field-effect transistors and Hall devices. Twisted homobilayers with angle-twisting accuracy of ≈0.3°, twisted heterobilayers with sub-degree angle-alignment accuracy, and multilayer superlattices are precisely constructed and characterized by their moiré patterns, interlayer excitons, and second harmonic generation. The present study paves the way for exploring emergent phenomena in moiré superlattices.

Quantum spin liquid signatures in monolayer 1T-NbSe2.

Quantum spin liquids (QSLs) are in a quantum disordered state that is highly entangled and has fractional excitations. As a highly sought-after state of matter, QSLs were predicted to host spinon excitations and to arise in frustrated spin systems with large quantum fluctuations. Here we report on the experimental observation and theoretical modeling of QSL signatures in monolayer 1T-NbSe2, which is a newly emerging two-dimensional material that exhibits both charge-density-wave (CDW) and correlated insulating behaviors. By using scanning tunneling microscopy and spectroscopy (STM/STS), we confirm the presence of spin fluctuations in monolayer 1T-NbSe2 by observing the Kondo resonance as monolayer 1T-NbSe2 interacts with metallic monolayer 1H-NbSe2. Subsequent STM/STS imaging of monolayer 1T-NbSe2 at the Hubbard band energy further reveals a long-wavelength charge modulation, in agreement with the spinon modulation expected for QSLs. By depositing manganese-phthalocyanine (MnPc) molecules with spin S = 3/2 onto monolayer 1T-NbSe2, new STS resonance peaks emerge at the Hubbard band edges of monolayer 1T-NbSe2. This observation is consistent with the spinon Kondo effect induced by a S = 3/2 magnetic impurity embedded in a QSL. Taken together, these experimental observations indicate that monolayer 1T-NbSe2 is a new promising QSL material.

Atomically precise engineering of spin-orbit polarons in a kagome magnetic Weyl semimetal.

Atomically precise defect engineering is essential to manipulate the properties of emerging topological quantum materials for practical quantum applications. However, this remains challenging due to the obstacles in modifying the typically complex crystal lattice with atomic precision. Here, we report the atomically precise engineering of the vacancy-localized spin-orbit polarons in a kagome magnetic Weyl semimetal Co3Sn2S2, using scanning tunneling microscope. We achieve the step-by-step repair of the selected vacancies, leading to the formation of artificial sulfur vacancies with elaborate geometry. We find that that the bound states localized around these vacancies undergo a symmetry dependent energy shift towards Fermi level with increasing vacancy size. As the vacancy size increases, the localized magnetic moments of spin-orbit polarons become tunable and eventually become itinerantly negative due to spin-orbit coupling in the kagome flat band. These findings provide a platform for engineering atomic quantum states in topological quantum materials at the atomic scale.

Ultrafast Non-Volatile Floating-Gate Memory Based on All-2D Materials.

The explosive growth of massive-data storage and the demand for ultrafast data processing require innovative memory devices with exceptional performance. 2D materials and their van der Waal heterostructures with atomically sharp interfaces hold great promise for innovations in memory devices. Here, this work presents non-volatile, floating-gate memory devices with all functional layers made of 2D materials, achieving ultrafast programming/erasing speeds (20 ns), high extinction ratios (up to 108), and multi-bit storage capability. These devices also exhibit long-term data retention exceeding 10 years, facilitated by a high gate-coupling ratio (GCR) and atomically sharp interfaces between functional layers. Additionally, this work demonstrates the realization of an "OR" logic gate on a single-device unit by synergistic electrical and optical operations. The present results provide a solid foundation for next-generation ultrahigh-speed, ultralong lifespan, non-volatile memory devices, with a potential for scale-up manufacturing and flexible electronics applications.

Tunable vortex bound states in multiband CsV3Sb5-derived kagome superconductors.

Vortices and bound states offer an effective means of comprehending the electronic properties of superconductors. Recently, surface-dependent vortex core states have been observed in the newly discovered kagome superconductors CsV3Sb5. Although the spatial distribution of the sharp zero energy conductance peak appears similar to Majorana bound states arising from the superconducting Dirac surface states, its origin remains elusive. In this study, we present observations of tunable vortex bound states (VBSs) in two chemically-doped kagome superconductors Cs(V1-xTrx)3Sb5 (Tr = Ta or Ti), using low-temperature scanning tunneling microscopy/spectroscopy. The CsV3Sb5-derived kagome superconductors exhibit full-gap-pairing superconductivity accompanied by the absence of long-range charge orders, in contrast to pristine CsV3Sb5. Zero-energy conductance maps demonstrate a field-driven continuous reorientation transition of the vortex lattice, suggesting multiband superconductivity. The Ta-doped CsV3Sb5 displays the conventional cross-shaped spatial evolution of Caroli-de Gennes-Matricon bound states, while the Ti-doped CsV3Sb5 exhibits a sharp, non-split zero-bias conductance peak (ZBCP) that persists over a long distance across the vortex. The spatial evolution of the non-split ZBCP is robust against surface effects and external magnetic field but is related to the doping concentrations. Our study reveals the tunable VBSs in multiband chemically-doped CsV3Sb5 system and offers fresh insights into previously reported Y-shaped ZBCP in a non-quantum-limit condition at the surface of kagome superconductor.

The relationship between circulating metabolites and prostate hyperplasia: a Mendelian randomization study.

BACKGROUND: Circulating metabolites (CM) play a pivotal role in our overall health, yet the current evidence concerning the involvement of diverse CM in benign prostatic hyperplasia (BPH) remains limited. Mendelian randomization (MR) offers a promising avenue to explore the potential impact of CM on BPH. METHODS: In a forward MR analysis, a cohort of 249 circulating metabolites was employed as exposures to investigate their potential associations with BPH risk. Conversely, in a reverse MR analysis, BPH was employed as an exposure to assess its effects on CM. RESULTS: The forward MR analysis discerned a linkage between six metabolites and BPH, with careful consideration to excluding heterogeneity and pleiotropy. Subsequently, the reverse MR analysis unveiled that nine metabolic compounds, mainly comprising phospholipids and triglycerides, potentially exhibit elevated levels in BPH patients. CONCLUSION: Bidirectional MR analysis furnishes genetic insight into the interplay between CM and BPH. The prominence of lipids and triglycerides emerges as significant factors intricately linked to BPH risk.

Conversion of chirality to twisting via sequential one-dimensional and two-dimensional growth of graphene spirals.

The properties of two-dimensional (2D) van der Waals materials can be tuned through nanostructuring or controlled layer stacking, where interlayer hybridization induces exotic electronic states and transport phenomena. Here we describe a viable approach and underlying mechanism for the assisted self-assembly of twisted layer graphene. The process, which can be implemented in standard chemical vapour deposition growth, is best described by analogy to origami and kirigami with paper. It involves the controlled induction of wrinkle formation in single-layer graphene with subsequent wrinkle folding, tearing and re-growth. Inherent to the process is the formation of intertwined graphene spirals and conversion of the chiral angle of 1D wrinkles into a 2D twist angle of a 3D superlattice. The approach can be extended to other foldable 2D materials and facilitates the production of miniaturized electronic components, including capacitors, resistors, inductors and superconductors.

Toward large-scale, ordered and tunable Majorana-zero-modes lattice on iron-based superconductors.

Majorana excitations are the quasiparticle analog of Majorana fermions in solid materials. Typical examples are the Majorana zero modes (MZMs) and the dispersing Majorana modes. When probed by scanning tunneling spectroscopy, the former manifest as a pronounced conductance peak locating precisely at zero-energy, while the latter behaves as constant or slowly varying density of states. The MZMs obey non-abelian statistics and are believed to be building blocks for topological quantum computing, which is highly immune to the environmental noise. Existing MZM platforms include hybrid structures such as topological insulator, semiconducting nanowire or 1D atomic chains on top of a conventional superconductor, and single materials such as the iron-based superconductors (IBSs) and 4Hb-TaS2. Very recently, ordered and tunable MZM lattice has also been realized in IBS LiFeAs, providing a scalable and applicable platform for future topological quantum computation. In this review, we present an overview of the recent local probe studies on MZMs. Classified by the material platforms, we start with the MZMs in the iron-chalcogenide superconductors where FeTe0.55Se0.45and (Li0.84Fe0.16)OHFeSe will be discussed. We then review the Majorana research in the iron-pnictide superconductors as well as other platforms beyond the IBSs. We further review recent works on ordered and tunable MZM lattice, showing that strain is a feasible tool to tune the topological superconductivity. Finally, we give our summary and perspective on future Majorana research.

Visualization of Confined Electrons at Grain Boundaries in a Monolayer Charge-Density-Wave Metal.

1D grain boundaries in transition metal dichalcogenides (TMDs) are ideal for investigating the collective electron behavior in confined systems. However, clear identification of atomic structures at the grain boundaries, as well as precise characterization of the electronic ground states, have largely been elusive. Here, direct evidence for the confined electronic states and the charge density modulations at mirror twin boundaries (MTBs) of monolayer NbSe2 , a representative charge-density-wave (CDW) metal, is provided. The scanning tunneling microscopy (STM) measurements, accompanied by the first-principles calculations, reveal that there are two types of MTBs in monolayer NbSe2 , both of which exhibit band bending effect and 1D boundary states. Moreover, the intrinsic CDW signatures of monolayer NbSe2 are dramatically suppressed as approaching an isolated MTB but can be either enhanced or suppressed in the MTB-constituted confined wedges. Such a phenomenon can be well explained by the MTB-CDW interference interactions. The results reveal the underlying physics of the confined electrons at MTBs of CDW metals, paving the way for the grain boundary engineering of the functionality.

Development of a cryogen-free sub-3 K low-temperature scanning probe microscope by remote liquefaction scheme.

We developed a new scheme for cryogen-free cooling down to sub-3 K temperature range and ultra-low vibration level. An ultra-high-vacuum cryogen-free scanning probe microscope (SPM) system was built based on the new scheme. Instead of mounting a below-decoupled cryocooler directly onto the system, the new design was realized by integrating a Gifford-McMahon cryocooler into a separate liquefying chamber, providing two-stage heat exchangers in a remote way. About 10 L of helium gas inside the gas handling system was cooled, liquefied in the liquefying chamber, and then transferred to a continuous-flow cryostat on the SPM chamber through an ∼2 m flexible helium transfer line. The exhausted helium gas from the continuous-flow cryostat was then returned to the liquefying chamber for reliquefaction. A base temperature of ∼2.84 K at the scanner sample stage and a temperature fluctuation of almost within ±0.1 mK at 4 K were achieved. The cooling curves, tunneling current noise, variable-temperature test, scanning tunneling microscopy and non-contact atomic force microscopy imaging, and first and second derivatives of I(V) spectra are characterized to verify that the performance of our cryogen-free SPM system is comparable to the bath cryostat-based low-temperature SPM system. This remote liquefaction close-cycle scheme shows conveniency to upgrade the existing bath cryostat-based SPM system, upgradeability of realizing even lower temperature down to sub-1 K range, and great compatibility of other physical environments, such as high magnetic field and optical accesses. We believe that the new scheme could also pave a way for other cryogenic applications requiring low temperature but sensitive to vibration.

Precision Graphene Nanoribbon Heterojunctions by Chain-Growth Polymerization.

Graphene nanoribbons (GNRs) are considered promising candidates for next-generation nanoelectronics. In particular, GNR heterojunctions have received considerable attention due to their exotic topological electronic phases at the heterointerface. However, strategies for their precision synthesis remain at a nascent stage. Here, we report a novel chain-growth polymerization strategy that allows for constructing GNR heterojunction with N=9 armchair and chevron GNRs segments (9-AGNR/cGNR). The synthesis involves a controlled Suzuki-Miyaura catalyst-transfer polymerization (SCTP) between 2-(6'-bromo-4,4''-ditetradecyl-[1,1':2',1''-terphenyl]-3'-yl) boronic ester (M1) and 2-(7-bromo-9,12-diphenyl-10,11-bis(4-tetradecylphenyl)-triphenylene-2-yl) boronic ester (M2), followed by the Scholl reaction of the obtained block copolymer (poly-M1/M2) with controlled Mn (18 kDa) and narrow D (1.45). NMR and SEC analysis of poly-M1/M2 confirm the successful block copolymerization. The solution-mediated cyclodehydrogenation of poly-M1/M2 toward 9-AGNR/cGNR is unambiguously validated by FT-IR, Raman, and UV/Vis spectroscopies. Moreover, we also demonstrate the on-surface formation of pristine 9-AGNR/cGNR from the unsubstituted copolymer precursor, which is unambiguously characterized by scanning tunneling microscopy (STM).

Discovery and construction of surface kagome electronic states induced by p-d electronic hybridization in Co3Sn2S2.

Kagome-lattice materials possess attractive properties for quantum computing applications, but their synthesis remains challenging. Herein, based on the compelling identification of the two cleavable surfaces of Co3Sn2S2, we show surface kagome electronic states (SKESs) on a Sn-terminated triangular Co3Sn2S2 surface. Such SKESs are imprinted by vertical p-d electronic hybridization between the surface Sn (subsurface S) atoms and the buried Co kagome-lattice network in the Co3Sn layer under the surface. Owing to the subsequent lateral hybridization of the Sn and S atoms in a corner-sharing manner, the kagome symmetry and topological electronic properties of the Co3Sn layer is proximate to the Sn surface. The SKESs and both hybridizations were verified via qPlus non-contact atomic force microscopy (nc-AFM) and density functional theory calculations. The construction of SKESs with tunable properties can be achieved by the atomic substitution of surface Sn (subsurface S) with other group III-V elements (Se or Te), which was demonstrated theoretically. This work exhibits the powerful capacity of nc-AFM in characterizing localized topological states and reveals the strategy for synthesis of large-area transition-metal-based kagome-lattice materials using conventional surface deposition techniques.

Robust Behavior of Charge Density Wave Quantum Motif Star-of-David in 2D NbSe2 Nanocrystals.

Charge density wave (CDW) is a typical collective phenomenon, and the phase change is generally accompanied by electronic transition with potential device applications. For the continuous miniaturization of devices, it is important to investigate the size effect down to the nanoscale. In this work, single-layer (SL) 1T-NbSe2 islands provide an ideal research platform to investigate the size effect on CDW arrangement and electronic states. The CDW motifs (Star-of-David [SOD]) at the island border are along the edge, and those at the interior tend to arrange in a triangular lattice for islands as small as 5 nm. Interestingly, in some small islands, the SOD clusters rearrange into a square-like lattice, and each SOD cluster remains robust as a quantum motif, both in the sense of geometry and electronic structures. Moreover, the electronic structure at the center of the small islands is downwards shifted compared to the big islands, explained by the spatial extension of the band bending originating from the edge of the islands. These findings reveal the robust behavior of CDW motifs down to the nanoscale and provide new insights into the size-limiting effect on 2D2D CDW ordering and electronic states down to a few nanometer extremes.

On-surface synthesis of ballbot-type N-heterocyclic carbene polymers.

N-Heterocyclic carbenes (NHCs) are established ligands for metal complexes and surfaces. Here we go beyond monomeric NHCs and report on the synthesis of NHC polymers on gold surfaces, consisting of ballbot-type repeating units bound to single Au adatoms. We designed, synthesized and deposited precursors containing different halogens on gold surfaces under ultrahigh vacuum. Conformational, electronic and charge transport properties were assessed by combining low-temperature scanning tunneling microscopy, non-contact atomic force microscopy, X-ray photoelectron spectroscopy, first-principles calculations and reactive force field simulations. The confirmed ballbot-type nature of the NHCs explains the high surface mobility of the incommensurate NHC polymers, which is prerequisite for their desired spatial alignment. The delicate balance between mobility and polymerization rate allows essential parameters for controlling polymer directionality to be derived. These polymers open up new opportunities in the fields of nanoelectronics, surface functionalization and catalysis.

Atomic-scale identification of nitrogen dopants in graphene on Ir(111) and Ru(0001).

Nitrogen (N) doped graphene materials have been synthesized using the sole precursor adenine on the Ir(111) and Ru(0001) surfaces. X-ray photoelectron spectroscopy and scanning tunneling microscopy (STM) have been used to characterize the obtained N-doped graphene materials. Several graphitic and pyridinic N dopants have been identified on the atomic scale by combining STM measurements and STM simulations based on density functional theory calculations.

A unique van Hove singularity in kagome superconductor CsV3-xTaxSb5 with enhanced superconductivity.

Van Hove singularity (VHS) has been considered as a driving source for unconventional superconductivity. A VHS in two-dimensional (2D) materials consists of a saddle point connecting electron-like and hole-like bands. In a rare case, when a VHS appears at Fermi level, both electron-like and hole-like conduction can coexist, giving rise to an enhanced density of states as well as an attractive component of Coulomb interaction for unconventional electronic pairing. However, this van Hove scenario is often destroyed by an incorrect chemical potential or competing instabilities. Here, by using angle-resolved photoemission measurements, we report the observation of a VHS perfectly aligned with the Fermi level in a kagome superconductor CsV3-xTaxSb5 (x ~ 0.4), in which a record-high superconducting transition temperature is achieved among all the current variants of AV3Sb5 (A = Cs, Rb, K) at ambient pressure. Doping dependent measurements reveal the important role of van Hove scenario in boosting superconductivity, and spectroscopic-imaging scanning tunneling microscopy measurements indicate a distinct superconducting state in this system.