Molten salts for efficient removal of radioactive contaminants from stainless steel surface: Mechanisms and applications.

Here, we have demonstrated an innovative decontamination strategy using molten salts as a solvent to clean stubborn uranium contaminants on stainless steel surfaces. The aim of this work was to investigate the evolutionary path of contaminants in molten salts to reveal the decontamination mechanism, thus providing a basis for the practical application of the method. Thermodynamic analysis revealed that alkali metal hydroxides, carbonates, chlorides and nitrates can react with uranium oxides (UO3 and U3O8) to form various uranates. Notably, the decontamination mechanism was elucidated by analyzing the chemical composition of the contaminants in the molten salts and the surface morphology of the specimens considering NaOH-Na2CO3-NaCl melt as the decontaminant. The decontamination process involved two stages: a rapid decontamination stage dominated by the thermal effect of molten salt, and a stable decontamination stage governed by the chemical reactions and diffusion of molten salt. Subsequently, a multiple decontamination strategy was implemented to achieve high decontamination rates and low residual radioactivity. Within the actual cleaning time of 30 min, the decontamination efficiency (DE) of UO3-contaminated specimens reached 97.8% and 93.0% for U3O8-contaminated specimens. Simultaneously, the radioactivity levels of all specimens were reduced to below the control level for reuse in the nuclear domain. Particularly, the actual radioactive waste from the nuclear industry reached a reusable level of radioactivity after decontamination. The NaOH-Na2CO3-NaCl melt outperforms conventional chemical solvents and may be one of the most rapid and efficient decontaminants for stubborn uranium contamination of metal surfaces, which provides insights in regard to handling nuclear waste.

Electrocatalytic and green system coupling strategy for simultaneous recovery and purification of uranium from uranium-containing wastewater.

The recycling of uranium in wastewater is not only beneficial to the protection of ecological safety but also has great significance for the sustainable development of nuclear energy. However, there is no satisfactory method to recover and reuse uranium efficiently up to now. Here, we have developed an efficient and economical strategy that can achieve uranium recovery and direct reuse in wastewater. The feasibility analysis verified that the strategy still had good separation and recovery ability in acidic, alkaline, and high-salinity environments. The purity of uranium recovered from the separated liquid phase after electrochemical purification was up to about 99.95%. Ultrasonication could greatly increase the efficiency of this strategy, and 99.00% of high-purity uranium could be recovered within 2 h. We further improved the overall recovery rate by recovering the residual solid-phase uranium, and the overall recovery of uranium was increased to 99.40%. Moreover, the concentration of impurity ions in the recovered solution met the World Health Organization guidelines. In summary, the development of this strategy is of great importance for the sustainable use of uranium resources and environmental protection.

Decontamination of uranium-containing radioactive waste from stainless steel surfaces using NaOH-based molten salts.

Herein, we report a new strategy for the rapid removal of uranium-containing contaminants from metal surfaces, and it relies on decontaminants made of NaOH-based molten salts. The addition of Na2CO3 and NaCl to NaOH exhibited superior decontamination performance, with a decontamination rate of 93.8% within 12 min, outdoing the performance of the single NaOH molten salt. The experimental results demonstrated that the synergistic effects between CO32- and Cl- promoted the corrosion efficiency of the molten salt on the substrate, which accelerated the decontamination rate. Additionally, benefiting from the optimization of the experimental conditions by the response surface method (RSM), the decontamination efficiency was improved to 94.9%. Notably, it also showed remarkable results in the decontamination of specimens containing different uranium oxides at low and high levels of radioactivity. This technology is promising for broadening the path in rapid decontamination of radioactive contaminants on metal surfaces.

Development of nitric acid-modified activated carbon electrode for removal of Co2+/Mn2+/Ni2+ by electrosorption.

In this paper, nitric acid-modified activated carbon was used as an electrode in the electrosorption process for the removal of Co2+, Mn2+, and Ni2+ from wastewater. The effects of applied voltage, initial pH, and coexisting ions on removal efficiency were investigated. The adsorption process was evaluated by adsorption isotherm models. The results indicated that the electrosorption process was consistent with the Langmuir model, proving that the electrosorption process was a monolayer adsorption process. The maximum adsorption capacities of Co2+, Mn2+, and Ni2+ were 131.58 mg/g, 102.04 mg/g, and 103.09 mg/g. Electrochemical tests revealed that the specific capacitance of AC-HNO3 was 54.11 F/g when the scanning rate was 5 mV/s, while the specific capacitance of AC was 36.51 F/g. The Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) confirmed that the content of oxygen groups on the surface of activated carbon increased after modification, which provided more adsorption sites for electrosorption. When the selected concentration of HCl was used as the eluent, the elution efficiency of Co2+, Mn2+, and Ni2+ could reach 94.23%, 93.65%, and 90.61%. The removal efficiency could reach more than 95% after three cycles. The results of the study can be used as a reference significance for the removal of cobalt, manganese, and nickel ions from heavy metal wastewater by electrosorption.

Valence regulation investigation of key factors on the electrochemical immobilization uranyl from wastewater.

Electrochemical techniques are considered promising applications to immobilize uranium in alkaline wastewater in order to prevent its migration into groundwater and soil. In this work, the results of electrochemical and Atomic Force Microscope (AFM) demonstrate a successful immobilization of uranyl in the carbonate system by U(VI)-U(V), U(V)-U(IV) reduction, and U(V) disproportionation reactions. The results indicated that the electrochemical fixation rate in alkaline system could reach more than 99%. The valence state of uranium is the key factor affecting its migration in the working system. Where, the analysis of the immobilized samples by X-ray photoelectron spectroscopy (XPS) revealed that pHs, current density, and the presence of foreign cations significantly affect the valence state of uranium in the immobilized samples. Under same conditions, the reduction reactions of U(VI)-U(V) and U(V)-U(IV) occurred easily. Where, at pH higher than 3.4 or the current density in the range of 0.5-20 mA/cm2, high content of U(V) and U(IV) in the immobilized products was obtained. Other conditions favored the occurrence of the electrolytic water reaction, and the immobilized samples were dominated by U(VI). It was found that the temperature showed the greatest effect on the electrochemical immobilization rate. Where, the electrochemical immobilization rate increased by about 1.8 times when the ambient temperature increased from 293.15 to 328.15 K. This study provides a new idea for the immobilization of uranium in alkaline wastewater and demonstrates the feasibility of electrochemical immobilization of uranium in alkaline systems.