RESUMEN
The fabrication of van der Waals (vdWs) heterostructures mainly extends to two-dimensional (2D) materials. Nevertheless, the current processes for obtaining high-quality 2D films are mainly exfoliated from their bulk counterparts or by high-temperature chemical vapor deposition (CVD), which limits industrial production and is often accompanied by defects. Herein, we first fabricated the type-II p-PdSe2/n-InSe vdWs heterostructure using the ultra-high vacuum laser molecular beam epitaxy (LMBE) technique combined with the vertical 2D stacking strategy, which is reproducible and suitable for high-volume manufacturing. This work found that the introduction of 365 nm UV light illumination can significantly improve the electrical transport properties and NO2 sensing performance of the PdSe2/InSe heterojunction-based device at room temperature (RT). The detailed studies confirm that the sensor based on the PdSe2/InSe heterojunction delivers the comparable sensitivity (Ra/Rg = â¼2.6 at 10 ppm), a low limit of detection of 52 ppb, and excellent selectivity for NO2 gas under UV light illumination, indicating great potential for NO2 detection. Notably, the sensor possesses fast response and full recovery properties (275/1078 s) compared to the results in the dark. Furthermore, the mechanism of enhanced gas sensitivity was proposed based on the energy band alignment of the PdSe2/InSe heterojunction with the assistance of investigating the surface potential variations. This work may pave the way for the development of high-performance, room-temperature gas sensors based on 2D vdWs heterostructures through the LMBE technique.
