RESUMEN
Black-phase formamidinium lead iodide (α-FAPbI3) perovskites are the desired phase for photovoltaic applications, but water can trigger formation of photoinactive impurity phases such as δ-FAPbI3. We show that the classic solvent system for perovskite fabrication exacerbates this reproducibility challenge. The conventional coordinative solvent dimethyl sulfoxide (DMSO) promoted δ-FAPbI3 formation under high relative humidity (RH) conditions because of its hygroscopic nature. We introduced chlorine-containing organic molecules to form a capping layer that blocked moisture penetration while preserving DMSO-based complexes to regulate crystal growth. We report power conversion efficiencies of >24.5% for perovskite solar cells fabricated across an RH range of 20 to 60%, and 23.4% at 80% RH. The unencapsulated device retained 96% of its initial performance in air (with 40 to 60% RH) after 500-hour maximum power point operation.
RESUMEN
Organic-inorganic hybrid perovskite (OIHP) has attracted a great deal of interest with respect to diverse optoelectronic devices. However, the photophysical properties of the OIHP require further understanding because most of the investigations have been conducted with polycrystalline perovskites, which contain high-density structural defects. Here, diverse photophysical properties, including structural characterization, spectroscopic features, and photoexcited products, are studied in submicrometer CH3NH3PbBr3 ultrathin single-crystal (UTSC) films. Unlike polycrystalline films and large single crystals, the UTSC film provides a unique platform for studying spectroscopic characteristics of single-crystal perovskites. Compared with the polycrystalline film, the UTSC film presents an atomically flat morphology and near-perfect lattice with a lower defect density, leading to an isotropic system that can be applied in the construction of high-performance optoelectronic devices. Furthermore, a long lifetime emissive channel assigned to the trion is indicated, which is scarcely found in perovskite polycrystalline films. Our results profoundly improve our understanding of their photophysical properties and expand the horizons for perovskite materials in photonic applications.
RESUMEN
Planar double heterostructures were initially investigated and have been successfully applied in III-V semiconductor lasers due to their excellent roles in confining both the photons and carriers. Here, we design and fabricate a (PEA)2Csn-1PbnX3n+1 (quasi-2D)/CsPbBr3 QD/quasi-2D double-heterostructure sandwiched in a 3/2 λ DBR microcavity, and then demonstrate a single-mode pure-green lasing with a threshold of 53.7 µJ/cm2 under nanosecond-pulsed optical pumping. The thresholds of these heterostructure devices decrease statistically by about 50% compared to the control group with no energy donor layers, PMMA/QD/PMMA in an identical microcavity. We show that there is efficient energy transfer from the barrier regions of the quasi-2D phases to the QD layer by transient absorption and luminescence lifetime spectra and that such energy transfer leads to marked threshold reduction. This work indicates that the double-heterostructure configurations should play a significant role in the future perovskite electrically pumped laser.
RESUMEN
This study aimed to create a comprehensive evaluation method for sewage sludge (SS) treatment and disposal technologies, considering carbon emission and environmental impacts. Life cycle assessment (LCA) were conducted on six SS treatment and disposal technologies in China. The assessments used the IPCC emission factor approach to calculate carbon emissions and the CML2001 method to determine environmental impact factors. Additionally, a colour-coded method was implemented to quantify the evaluation results. The study found that S1 (anaerobic digestion + land application) had the lowest carbon emissions and environmental impact, making it the optimal technology. The S1 scenario had carbon emissions of 669â kg CO2(t DS)-1 and environmental impacts of 5.20E-10. A sensitivity analysis was conducted to show the impacts of each unit in the six technologies on total carbon emissions and environmental impacts. The results showed that landfilling has a high sensitivity to carbon emissions and environmental impacts. Therefore, controlling greenhouse gases and toxic substances in sludge landfills is crucial for reducing carbon emissions and environmental pollution.
RESUMEN
Determining the correlation between the size of a single quantum dot (QD) and its photoluminescence (PL) properties is a challenging task. In the study, we determine the size of each QD by measuring its absorption cross section, which allows for accurate investigation of size-dependent PL blinking mechanisms and volume scaling of the biexciton Auger recombination at the single-particle level. A significant correlation between the blinking mechanism and QD size is observed under low excitation conditions. When the QD size is smaller than their Bohr diameter, single CsPbI3 perovskite QDs tend to exhibit BC-blinking, whereas they tend to exhibit Auger-blinking when the QD size exceeds their Bohr diameter. In addition, by extracting bright-state photons from the PL intensity trajectories, the effects of QD charging and surface defects on the biexcitons are effectively reduced. This allows for a more accurate measurement of the volume scaling of biexciton Auger recombination in weakly confined CsPbI3 perovskite QDs at the single-dot level, revealing a superlinear volume scaling (τXX,Auger â σ1.96).
RESUMEN
For atomically thin two-dimensional materials, variations in layer thickness can result in significant changes in the electronic energy band structure and physicochemical properties, thereby influencing the carrier dynamics and device performance. In this work, we employ time- and energy-resolved photoemission electron microscopy to reveal the ultrafast carrier dynamics of PdSe2 with different layer thicknesses. We find that for few-layer PdSe2 with a semiconductor phase, an ultrafast hot carrier cooling on a timescale of approximately 0.3 ps and an ultrafast defect trapping on a timescale of approximately 1.3 ps are unveiled, followed by a slower decay of approximately tens of picoseconds. However, for bulk PdSe2 with a semimetal phase, only an ultrafast hot carrier cooling and a slower decay of approximately tens of picoseconds are observed, while the contribution of defect trapping is suppressed with the increase of layer number. Theoretical calculations of the electronic energy band structure further confirm the transition from a semiconductor to a semimetal. Our work demonstrates that TR- and ER-PEEM with ultrahigh spatiotemporal resolution and wide-field imaging capability has great advantages in revealing the intricate details of ultrafast carrier dynamics of nanomaterials.
RESUMEN
Plasmon-induced hot-electron transfer at the metallic nanoparticle/semiconductor interface is the basis of plasmon-enhanced photocatalysis and energy harvesting. However, limited by the nanoscale size of hot spots and femtosecond time scale of hot-electron transfer, direct observation is still challenging. Herein, by using spatiotemporal-resolved photoemission electron microscopy with a two-color pump-probe beamline, we directly observed such a process with a concise system, the Au nanoparticle/monolayer transition-metal dichalcogenide (TMD) interface. The ultrafast hot-electron transfer from Au nanoparticles to monolayer TMDs and the plasmon-enhanced transfer process were directly measured and verified through an in situ comparison with the Au film/TMD interface and free TMDs. The lifetime at the Au nanoparticle/MoSe2 interface decreased from 410 to 42 fs, while the photoemission intensities exhibited a 27-fold increase compared to free MoSe2. We also measured the evolution of hot electrons in the energy distributions, indicating the hot-electron injection and decay happened in an ultrafast time scale of â¼50 fs without observable electron cooling.
RESUMEN
Objectives: Patients may have uncomfortable feelings during orthodontic treatment, which can directly lead to dissatisfaction. So in order to improve the patient's sense of pleasure during the treatment, it would be of great benefit if orthodontic pain can be relieved. Materials and methods: We included 150 patients wearing clear aligners from 18 to 30 years old during 2018-2020. Then designed following groups to determine the effectiveness of both verbal behavior modification and combination therapy with acetaminophen in reducing treatment pain: Group A, generalized anxiety disorder 7 (GAD-7) scored 0-4; Group B, GAD-7 scored 5-9; Group C, GAD-7 scored 10-14; and Group D, GAD-7 scored 15-21. Results: There was a difference in the visual analog scale (VAS) between verbal behavior modification with and without a 300-mg acetaminophen tablet oral QD in Group A (received the intervention at 8 h and 1 d), Group B at 8 h and 1 d, Group C at 8 h, 1 d, 2 d, and 3 d, and Group D at 8 h, 1 d, 2 d, 3 d, and 4 d. After 8 h, 1 d, 2 d, 3 d, and 4 d in patients with verbal behavior modification, VAS was markedly increased in Group D compared with Group A, B and C. Furthermore, after 8 h and 1 d in patients with verbal behavior modification and 300-mg acetaminophen tablet oral QD, VAS was strongly enhanced in Group D. Conclusions: Dental anxiety is strongly associated with pain in orthodontic patients receiving clear aligners. Acetaminophen administration may be a benefit in orthodontic pain that results from clear aligners, especially in the group with more GAD-7.
RESUMEN
Increasing eutrophication has led to a continuous deterioration of many aquatic ecosystems. Polyphosphate-accumulating organisms (PAOs) can provide insight into the human response to this challenge, as they initiate enhanced biological phosphorus removal (EBPR) through cyclical anaerobic phosphorus release and aerobic phosphorus uptake. Although the limiting environmental factors for PAO growth and phosphorus removal have been widely discussed, there remains a gap in the knowledge surrounding the differences in the type and phosphorus removal efficiencies of natural and engineered PAO systems. Furthermore, due to the limitations of PAOs in conventional wastewater treatment environments, there is an urgent need to find functional PAOs in extreme environments for better wastewater treatment. Therefore, it is necessary to explore the effects of extreme conditions on the phosphorus removal efficiency of PAOs as well as the types, sources, and characteristics of PAOs. In this paper, we summarize the response mechanisms of PAOs, denitrifying polyphosphate-accumulating organisms (D-PAOs), aerobic denitrifying polyphosphate-accumulating organisms (AD-PAOs), and sulfur-related PAOs (S-PAOs). The mechanism of nitrogen and phosphorus removal in PAOs is related to the coupling cycles of carbon, nitrogen, phosphorus, and sulfur. The genera of PAOs differ in natural and engineered systems, but PAOs have more diversity in aquatic environments and soils. Recent studies on the impact of several parameters (e.g., temperature, carbon source, pH, and dissolved oxygen) and extracellular polymer substances on the phosphorus removal efficiency of PAOs in natural and engineered systems are further discussed. Most of the PAOs screened under extreme conditions still had high phosphorus removal efficiencies (>80.0 %). These results provide a reference for searching for PAOs with different adaptations to achieve better wastewater treatment.
Asunto(s)
Fósforo , Polifosfatos , Humanos , Ecosistema , Glucógeno , Reactores Biológicos , Carbono/química , Nitrógeno , Azufre , Aguas del AlcantarilladoRESUMEN
With the rapid development of integrated circuits, there is an increasing need to boost transistor density. In addition to shrinking the device size to the atomic scale, vertically stacked interlayer interconnection technology is also an effective solution. However, realizing large-scale vertically interconnected complementary field-effect transistors (CFETs) has never been easy. Currently-used semiconductor channel synthesis and doping technologies often suffer from complex fabrication processes, poor vertical integration, low device yield, and inability to large-scale production. Here, a method to prepare large-scale vertically interconnected CFETs based on a thermal evaporation process is reported. Thermally-evaporated etching-free Te and Bi2S3 serve as p-type and n-type semiconductor channels and exhibit FET on-off ratios of 103 and 105, respectively. The vertically interconnected CFET inverter exhibits a clear switching behavior with a voltage gain of 17 at a 4 V supply voltage and a device yield of 100%. Based on the ability of thermal evaporation to prepare large-scale uniform semiconductor channels on arbitrary surfaces, repeated upward manufacturing can realize multi-level interlayer interconnection integrated circuits.
RESUMEN
Transition metal dichalcogenide heterostructures have been extensively studied as a platform for investigating exciton physics. While heterobilayers such as WSe_{2}/MoSe_{2} have received significant attention, there has been comparatively less research on heterotrilayers, which may offer new excitonic species and phases, as well as unique physical properties. In this Letter, we present theoretical and experimental investigations on the emission properties of quadrupolar excitons (QXs), a newly predicted type of exciton, in a WSe_{2}/MoSe_{2}/WSe_{2} heterotrilayer device. Our findings reveal that the optical brightness or darkness of QXs is determined by horizontal mirror symmetry and valley and spin selection rules. Additionally, the emission intensity and energy of both bright and dark QXs can be adjusted by applying an out-of-plane electric field, due to changes in hole distribution and the Stark effect. These results not only provide experimental evidence for the existence of QXs in heterotrilayers but also uncover their novel properties, which have the potential to drive the development of new exciton-based applications.
RESUMEN
Exploring ultrafast carrier dynamics is crucial for the materials' fundamental properties and device design. In this work, we employ time- and energy-resolved photoemission electron microscopy with tunable pump wavelengths from visible to near-infrared to reveal the ultrafast carrier dynamics of the elemental semiconductor tellurium. We find that two discrete sub-bands around the Γ point of the conduction band are involved in excited-state electron ultrafast relaxation and reveal that hot electrons first go through ultrafast intra sub-band cooling on a time scale of about 0.3 ps and then transfer from the higher sub-band to the lower one on a time scale of approximately 1 ps. Additionally, theoretical calculations reveal that the lower one has flat-band characteristics, possessing a large density of states and a long electron lifetime. Our work demonstrates that TR- and ER-PEEM with broad tunable pump wavelengths are powerful techniques in revealing the details of ultrafast carrier dynamics in time and energy domains.
RESUMEN
Understanding ultrafast electronic dynamics of the interlayer excitonic states in atomically thin transition metal dichalcogenides is of importance in engineering valleytronics and developing excitonic integrated circuits. In this work, we experimentally explored the ultrafast dynamics of indirect interlayer excitonic states in monolayer type II WSe2/ReS2 heterojunctions using time-resolved photoemission electron microscopy, which reveals its anisotropic behavior. The ultrafast cooling and decay of excited-state electrons exhibit significant linear dichroism. The ab initio theoretical calculations provide unambiguous evidence that this linear dichroism result is primarily associated with the anisotropic nonradiative recombination of indirect interlayer excitonic states. Measuring time-resolved photoemission energy spectra, we have further revealed the ultrafast evolution of excited-state electrons in anisotropic indirect interlayer excitonic states. The findings have important implications for controlling the interlayer moiré excitonic effects and designing anisotropic optoelectronic devices.
RESUMEN
Nanocrystal-based light-emitting diodes (Nc-LEDs) have immense potential for next-generation high-definition displays and lighting applications. They offer numerous advantages, such as low cost, high luminous efficiency, narrow emission, and long lifetime. However, the external quantum efficiency (EQE) of Nc-LEDs, typically employing isotropic nanocrystals, is limited by the out-coupling factor. Here efficient, bright, and long lifetime red Nc-LEDs based on anisotropic nanocrystals of colloidal quantum wells (CQWs) are demonstrated. Through modification of the substrate's surface properties and control of the interactions among CQWs, a self-assembled layer with an exceptionally high distribution of in-plane transitions dipole moment of 95%, resulting in an out-coupling factor of 37% is successfully spin-coated. The devices exhibit a remarkable peak EQE of 26.9%, accompanied by a maximum brightness of 55 754 cd m-2 and a long operational lifetime (T95 @100 cd m-2 ) over 15 000 h. These achievements represent a significant advancement compared to previous studies on Nc-LEDs incorporating anisotropic nanocrystals. The work is expected to provide a general self-assembly strategy for enhancing the light extraction efficiency of Nc-LEDs based on anisotropic nanocrystals.
RESUMEN
Low-loss dielectric modes are important features and functional bases of fundamental optical components in on-chip optical devices. However, dielectric near-field modes are challenging to reveal with high spatiotemporal resolution and fast direct imaging. Herein, we present a method to address this issue by applying time-resolved photoemission electron microscopy to a low-dimensional wide-bandgap semiconductor, hexagonal boron nitride (hBN). Taking a low-loss dielectric planar waveguide as a fundamental structure, static vector near-field vortices with different topological charges and the spatiotemporal evolution of waveguide modes are directly revealed. With the lowest-order vortex structure, strong nanofocusing in real space is realized, while near-vertical photoemission in momentum space and narrow spread in energy space are simultaneously observed due to the atomically flat surface of hBN and the small photoemission horizon set by the limited photon energies. Our approach provides a strategy for the realization of flat photoemission emitters.
RESUMEN
We experimentally study photoemission from gold nanodisk arrays using space-, time-, and energy-resolved photoemission electron microscopy. When excited by a plasmonic resonant infrared (IR) laser pulse, plasmonic hotspots are generated owing to local surface plasmon resonance. Photoelectrons emitted from each plasmonic hotspot form a nanoscale and ultrashort electron pulse. When the system is excited by an extreme ultraviolet (EUV) laser pulse, a uniformly distributed photoelectron cloud is formed across the sample surface. When excited by the IR and EUV laser pulses together, both the photoemission image and kinetic energy vary significantly for the IR laser-generated electrons depending on the time delay between the two laser pulses. These observations are well explained by the Coulomb interaction with the EUV laser-generated electron cloud. Our study offers a feasible approach to manipulate the energy of electron pulse emitted from a plasmonic nanostructure on an ultrafast time scale.
RESUMEN
ABSTRACTAnaerobic ammonia oxidation process has the advantages of energy and cost reduction, therefore, it has been considered as one of the main alternatives to conventional biological denitrification process in recent years. Biochar has been applied in the anammox process for nitrogen removal efficiency. But, due to its extracellular electron transfer capacity and abundance of redox-specific functional groups, which served as extracellular electron acceptor to anaerobically oxidize NH4+ is still controversy. In this study, the anaerobic ammonia oxidation was investigated when biochar was used as electron acceptor in the wastewater. According to the optimal process variables determined in the batch tests, when the influent NH4+-N concentration in the anaerobic ammonia oxidation reaction was 30-50â mg/L and the biochar dosing was at 10â g/L, it showed some promotion in the long-term experiments. The anaerobic ammonia oxidation process with biochar as the electron acceptor reached more than 60% NH4+-N removal efficiency in the system, and the ΔNO3--N/ΔNH4+-N ratio reached 0.19 which tended to the theoretical value. After 20 days, the voltage in the system keeps fluctuating about 4â mV, indicated that the functional bacteria using biochar as the electron acceptor gradually dominated the system. In addition, the abundance of norank_f__norank_o__SBR1031 in the Chloroflexi phylum has increased significantly at 29.92%, while the abundance of the major genus Candidatus_Kuenenia in AnAOB has decreased slightly at 11.47%.
RESUMEN
Colloidal perovskite nanocrystals (PNCs) display bright luminescence for light-emitting diode (LED) applications; however, they require post-synthesis ligand exchange that may cause surface degradation and defect formation. In situ-formed PNCs achieve improved surface passivation using a straightforward synthetic approach, but their LED performance at the green wavelength is not yet comparable with that of colloidal PNC devices. Here, it is found that the limitations of in situ-formed PNCs stem from uncontrolled formation kinetics: conventional surface ligands confine perovskite nuclei but fail to delay crystal growth. A bifunctional carboxylic-acid-containing ammonium hydrobromide ligand that separates crystal growth from nucleation is introduced, leading to the formation of quantum-confined PNC solids exhibiting a narrow size distribution. Controlled crystallization is further coupled with defect passivation using deprotonated phosphinates, enabling improvements in photoluminescence quantum yield to near unity. Green LEDs are fabricated with a maximum current efficiency of 109 cd A-1 and an average external quantum efficiency of 22.5% across 25 devices, exceeding the performance of their colloidal PNC-based counterparts. A 45.6 h operating half-time is further documented for an unencapsulated device in N2 with an initial brightness of 100 cd m-2 .
RESUMEN
Some industrial wastewaters contain high amounts of toxic nitrogen-containing heterocyclic compounds, which may inhibit the efficiency of biological treatment. This work systematically investigated how exogenous pyridine affected the anaerobic ammonia oxidation (anammox) system and discussed the microscopic response mechanisms based on genes and enzymes. The anammox efficiency was not seriously inhibited by pyridine less than 50 mg/L. Bacteria secreted more extracellular polymeric substances to resist pyridine stress. After 6 days stress with 80 mg/L pyridine, the nitrogen removal rate of anammox system lost 47.7%. Long-term stress of pyridine reduced anammox bacteria by 7.26% and the expression of functional genes by 45%. Pyridine could actively bind to hydrazine synthase and ammonium transporter. This work fills a research gap in the ongoing threat of pyridines to anammox, and has guiding value for the application of anammox process in the treatment of ammonia-rich wastewater containing pyridine.
Asunto(s)
Compuestos de Amonio , Oxidación Anaeróbica del Amoníaco , Reactores Biológicos/microbiología , Oxidación-Reducción , Compuestos de Amonio/metabolismo , Aguas Residuales , Bacterias/metabolismo , Piridinas/metabolismo , Nitrógeno/metabolismo , Desnitrificación , Aguas del AlcantarilladoRESUMEN
ABSTRACTAcclimatization of short-cut denitrifying polyphosphate accumulating organisms (SDPAOs), metabolic mechanism, and operating parameters were analyzed to investigate the performance of the anaerobic/anoxic sequencing batch reactor (A2SBR) process. The high-throughput sequencing technology was employed to explore the microbial community structures of activated sludge systems. The experimental results illustrated that SDPAOs were successfully enriched with three-phase inoculation for 36 days. The removal rates of TP and NO2--N were 93.22% and 91.36%, respectively, under the optimal parameters of a pH of 7.5, an SRT of 26 days, a temperature of 24â â and a COD of 200.00â mg·L-1 using acetate as the carbon source. In the anaerobic stage, 82.20% external carbon source was converted into 88.78â mg·g-1 PHB, and the removal rate of NO2--N in the anoxic stage was characterized by ΔNO2--N/ΔPHB, anoxic ΔP/ΔPHBeffective was 0.289, which was higher than anaerobic ΔP/ΔCODeffective of 0.203. Ignavibacterium and Povalibacter with significant phosphorus removal ability were the dominant bacterial genera. The nitrogen and phosphorus removal could be realized simultaneously in an anaerobic/anoxic sequencing batch reactor. Therefore, this study provided an important understanding of the removal of nitrogen and phosphorus from low-carbon nitrogen wastewater.