RESUMEN
Neutron spectrum unfolding is a crucial process in radiation protection and dosimetry. Unfolding codes using iterative algorithms require a criterion to stop the iterations. One approach often relies on the Root Mean Square Error (RMSE) criterion to assess the convergence of iterative algorithms. The aim of this work is to present a new criteria: Average Ratio Scaled (AVGS) and Relative Change in AVGS (dAVGS) to address specific challenges associated with RMSE. Extensive validation tests were conducted, covering a range of scenarios with results showing high level of agreement between the unfolded spectra and the reference.
RESUMEN
FANT (Fuente Ampliada de Neutrones Térmicos; in Spanish) is a thermal neutron irradiation facility with an extended and very uniform irradiation area, which has been developed by the Neutron Measurement Laboratory of the Energy Engineering Department at Universidad Politécnica de Madrid (LMN-UPM). In FANT, an isotopic neutron source (241Am/9Be) produces the primary neutrons. The design and facility optimization were carried out by extensive Monte Carlo calculations. In addition, Monte Carlo methods were used to evaluate the facility's performance to produce a constant and uniform thermal neutron field; these results were validated through experimental methods. FANT is designed to have two neutron sources; the objective of this work is to estimate the ambient dose equivalent due to neutrons and gamma-rays by Monte Carlo methods, and to compare these values with measured experimental doses. Thus, the performance of FANT with the two 241Am/9Be sources of LMN-UPM, with regard to the ambient dose equivalent H*(10) produced by both neutrons and photons around the facility, is analyzed in this work. The results are compared with those previously obtained in the framework of the results obtained with the LB6411 device around FANT.
RESUMEN
This work presents Chameleon, a cloud computing (CC) Industry 4.0 (I4) neutron spectrum unfolding code. The code was designed under the Python programming language, using Streamlit framework®, and it is executed on the cloud, as I4 CC technology through internet, by using mobile devices with internet connectivity and a web navigator. In its first version, as a proof of concept, the SPUNIT algorithm was implemented. The main functionalities and the preliminary tests performed to validate the code are presented. Chameleon solves the neutron spectrum unfolding problem and it is easy, friendly and intuitive. It can be applied with success in various workplaces. More validation tests are in progress. Future implementations will include improving the graphical user interface, inserting other algorithms, such as GRAVEL, MAXED and neural networks, and implementing an algorithm to estimate uncertainties in the calculated integral quantities.
Asunto(s)
Algoritmos , Nube Computacional , Redes Neurales de la Computación , Internet , NeutronesRESUMEN
Bonner Sphere Spectrometers (BSS) are widely used for neutron spectrometry. Spectra are obtained by unfolding detector readings. In this work, a Python Graphical User Interface Application (GUI/App) for spectrum unfolding is presented; SpecUnPy. In this App, the user can choose three unfolding algorithms: SPUNIT/MLEM/GRAVEL. There is no limit for energy bins or detectors and after unfolding, a ".xlsx" file and a graphical comparison can be downloaded. This paper presents SpecunPy and some tests performed to validate it.
RESUMEN
The thermal neutron irradiation device (FANT), developed at the Neutron Measurements Laboratory of the Energy Engineering Department at Universidad Politécnica de Madrid, is a high-density polyethylene regular parallelepiped, with a rather uniform neutron fluence inside its irradiation chamber. It uses a Am95241/Be49 neutron source aiming to provide thermal neutron fluence rates. Neutron spectra and neutron fluences were estimated with Monte Carlo methods in the FANT irradiation chamber when a Cf98252 neutron source is used and were compared with the results obtained with the Am95241/Be49 source. Regardless of the neutron source, the largest contribution is due to thermal neutrons, producing also epithermal and fast neutrons. Per neutron emitted by the source, the use of Cf98252 produces a larger amount of neutrons.
RESUMEN
Proton therapy is an external radiotherapy using proton beams with energies between 70 and 230 MeV to treat some type of tumours with outstanding benefits, due to its energy transfer plot. There is a growing demand of facilities taking up small spaces and Compact Proton Therapy Centers (CPTC), with one or two treatment rooms, supposing the technical response of manufacturers to this request. A large amount of stray radiation is yielded in the interaction of proton beam used in therapy, neutrons mainly, hence, optimal design of shielding and verifications must be carried out in commissioning phases. Currently, almost 50 proton centers are under construction and start up in several countries, including ten in Spain. In the present work the effectiveness of shielding in two CPTC was verified with the Monte Carlo code MCNP6 by calculating the ambient dose equivalent, H*(10) due to secondary neutrons, outside the enclosures and walls of the center. The facilities modelled were the two centers currently operating in Spain, the first, since December 2019, with a superconductor synchrocyclotron, and the second, since March 2020, with a compact synchrotron. The geometry and materials are based on dimensions proposed a priori by the vendors, therefore, the paper is focused on check the suitability of the materials and thickness of the walls of the centers. Several models of the radiation sources were simulated, starting from a conservative assumptions, followed by more realistic scenarios. In all cases, the results reached for the ambient dose equivalent, H*(10), were below 1 mSv/year, which is the legal limit considered for the public in international references. Finally, considering that the recent ICRU Report 95 proposes changes in the operational quantities, the dose outside shieldingt has been evaluated in terms of the new next area surveillance quantity, H*, known as ambient dose, in the process of implementation.
RESUMEN
The use of different nuclear data libraries and physics models can be a source of discrepancies in neutron transport simulation. Different Monte Carlo simulation toolkits can be used to characterize neutron monitors, these codes usually employ by default different nuclear data libraries and physics models. This work presents, for the first time, a comparison of MCNP and PHITS for the characterization of a LUPIN-II neutron rem-meter. The most significant discrepancies between the codes have been found around 100 MeV.
Asunto(s)
Neutrones , Simulación por Computador , Método de Montecarlo , Fantasmas de ImagenRESUMEN
Neutron area monitors do not often have a good adjustment of their dose response functions to the ICRP74 neutron fluence-to-H*(10) conversion function between 10 and 20 MeV. The objective of this work is to establish a methodology to combine the dose response functions of Berthold LB6411 and WENDI-II, adjusting this combined function to the ICRP74 conversion function: this combination shows an almost perfect adjustment between 0.5 and 20 MeV. Thus, this article presents an easy and cheap alternative to the recalibration in D-T generators.
Asunto(s)
Neutrones , Radiometría , Dosis de Radiación , Radiometría/métodosRESUMEN
In the detection and measurement of neutron fields, with energies between 10 and 20 MeV, current passive neutron area monitors based on gold foil sensors usually do not have a perfect fitting of their dose response functions with the neutron fluence-to-ambient dose equivalent conversion function from ICRP74. However, apart from the radiative capture in 197Au, the common channel considered in these monitors, other nuclear reactions in 197Au can be considered to improve the fit between both functions. Therefore, this work aimed to develop a mathematical combination of response functions in passive monitors with gold foils, considering the (n, γ) and (n, 2n) channels in 197Au, to extend their response up to 20 MeV, improving their performance under neutron fields with high energies. The proposed methodology avoids introducing modifications in the original device, such as the insertion of sheets with high-Z materials, and simplifies the design and manufacturing of passive monitors, while reducing costs.
RESUMEN
FANT (Fuente Ampliada de Neutrones Térmicos; in Spanish) is a thermal neutron irradiation facility with an extended and very uniform irradiation area, that has been developed by the Neutron Measurements Laboratory of the Energy Engineering Department at Universidad Politecnica de Madrid (LMN-UPM). This device is a parallelepiped box made of high-density polyethylene (HDPE), moderator material, that uses an A95241m/B49e neutron source of 111 GBq nominal activity for irradiating materials. The facility design was previously optimized, and the neutron spectra were estimated by extensive calculations with the MCNP6.1 code and carrying out experimental measurements (Bedogni et al., 2017). The facility takes advantage of the scattering reactions of neutrons with the HDPE surfaces of the chamber, where the moderation process is effective, achieving relevant thermal neutron fluence rates. The main goal of this work has been to simulate and analyse the FANT system by Monte Carlo methods using the MCNP6.1 code, employing 3 different nuclear data libraries: ENDF/B-VII.1, JEFF-3.3 and TENDL 2017. The transport of thermal neutrons in HDPE, E < 1eV, has been calculated in all the cases taking into account the thermal S (α,ß) treatment. The results achieved in this work have been compared with those previously obtained in the former development of FANT, using the MCNP6.1 code with the ENDF/B-VII.1 nuclear data, and experimental measurements. These results have shown that the JEFF-3.3 nuclear data library is the nuclear data library that provides of the best matching between the MCNP computational results, and the experimental data collected at FANT. Hence, the JEFF-3.3 nuclear data library seems to be the most correct library to design and benchmark thermal neutron activation devices.
RESUMEN
In proton therapy centers stray neutron radiation of up to 230-250 MeV is yielded by (p, Xn) nuclear reactions. To monitor ambient dose in such facilities, extended-range rem-meters are needed. The aim of this project was to characterize the response of two extended-range rem-meters, WENDI-II and LUPIN-II, by Monte Carlo methods, for energies ranging from 10-9 MeV up to 230 MeV. Different nuclear data libraries (ENDF/B-VII.1, TENDL2017, TENDL2019, JEFF-3.3) have been used, determining the uncertainties associated with the application of the libraries in the calculation of the response functions of both monitors. The differences found are very significant at energies around 150-200 MeV. This is an issue for predicting by Monte Carlo methods the response of these instruments at high energies. The results point to the necessity of testing experimentally the response of rem-meters at 150 MeV-200 MeV neutron beams.
RESUMEN
Proton therapy (PT) is an external radiotherapy using proton beams with energies between 70 and 230 MeV to treat some type of tumours with outstanding benefits, due to its energy transfer plot. There is a growing demand of facilities taking up small spaces and Compact Proton Therapy Centers (CPTC), with one or two treatment rooms, supposing the technical response of manufacturers to this request. A large amount of stray radiation is produced in the interaction of protons used in therapy, neutrons mainly, hence, optimal design of shielding and verifications must be carried out in commissioning stages. Currently, almost 50 CPTC are under construction and start up in many countries, including several in Spain. In the present work, the effectiveness of shielding in a CPTC was verified with the Monte Carlo code MCNP6 by calculating the ambient dose equivalent, H*(10) due to secondary neutrons, outside the enclosures and walls of the center. The facility modelled was similar to one planned to start operating in 2019 in Spain, a CPTC, made up of a superconducting synchrocyclotron and one treatment room, with a configuration standard, shielding and width of barriers based on dimensions proposed a priori by the vendor. Therefore, the paper is focused in check the suitability of the materials and thickness of the walls of the center and develop the assessment of enclosures. Several models of the radiation sources and type of concrete in walls were simulated, starting from a conservative assumptions, followed by more realistic models. In all cases, the results were below 1 mSv/year, which is the international legal limit considered for the general public. This work is part of the project Contributions to Shielding and Dosimetry of Neutrons in Compact Proton Therapy Centers (CPTC).
Asunto(s)
Neutrones , Terapia de Protones , Protección Radiológica , Dosificación Radioterapéutica , Humanos , Método de Montecarlo , IncertidumbreRESUMEN
High-energy neutrons up to 230 MeV are generated as a consequence of (p,n) nuclear reactions in proton therapy facilities. The aim of this work is to evaluate the potential extension of the UPM Bonner Sphere Spectrometer (BSS) through the use of spallation materials, for its future application to determine neutron fluence spectra in such facilities. Monte Carlo methods have been used to model the response of the actual and modified spheres with the introduction of a spallation material layer, lead or copper, analyzing their response functions. An analysis is also made of the neutron fluence spectra over the 6LiI(Eu) scintillator volume and the uncertainty that can be associated to the response functions at high energies as a consequence of the different physics models that can be applied for their analysis.
RESUMEN
Compact Proton Therapy Centers, CPTC, have a single treatment room, and are technologically more affordable, smaller, advanced and easier to use. From a radiological protection point of view, the leading concern in CPTC are interactions of protons with components of the facility and patients that yield a broad emission of secondary particles, mainly high-energy neutrons, up to 230â¯MeV, and photons. Optimal design of shielding involves theoretical assumptions in the design phase and, consequently, experimental measurements with extended range neutron detectors must be carried out in the facility during the commissioning period to verify the design, assumptions and building of the enclosures. There are almost 50 CPTC under construction and planning around the world, hence the improvement of methodologies to verify the shielding and to evaluate the dose to workers and general public in CPTC is a trending issue. The aim of this work was to evaluate and compare the response of two commercial extended range REM meters, WENDI-II and LUPIN-II, for their application in shielding verification and radiation area monitoring in CPTC facilities, by estimating the ambient dose equivalent, H*(10), through the Monte Carlo code MCNP6. The results have been compared with previous works. Likewise, the performance evaluation of these devices in continuous energy neutron field have been carried out, using the AmBe/241 neutron source of the Neutronics Hall (NH) of the Neutron Measurements Laboratory of the Energy Engineering Department of Universidad Politecnica de Madrid (LMN-UPM), through Monte Carlo simulation with the MCNP6 code and experimental measurements. The work is framed into the project Contributions to Shielding and Dosimetry of Neutrons in CPTC.