Prefeasibility analysis of biomass gasification and electrolysis for hydrogen production.

Hydrogen is a key energy vector to accomplishing energy transition and decarbonization goals proposed in the transport and industrial sectors worldwide. In recent years, research has focused on analyzing, designing, and optimizing hydrogen production, searching to improve economic prefeasibility with minimal emissions of polluting gases. Therefore, the techno-economic analysis of hydrogen production by electrolytic and gasification processes becomes relevant since these processes could compete commercially with industrial technologies such as SMR - Steam methane reforming. This work aims to analyze hydrogen production in stand-alone processes and energy-driven biorefineries. The gasification and electrolysis technologies were evaluated experimentally, and the yields obtained were input data for scaling up the processes through simulation tools. Biomass gasification is more cost-effective than electrolytic schemes since the hydrogen production costs were 4.57 USD/kg and 8.30 USD/kg at an annual production rate of 491.6 tons and 38.96 tons, respectively. Instead, the electrolysis process feasibility is strongly influenced by the recycled water rate and the electricity cost. A sensitivity analysis was performed to evaluate the temperature, pressure, and current density variability on the hydrogen production rate. The increase in pressure and current density induces parasitic currents while the temperature increases hydrogen production. Although higher hydrogen production rates from gasification, the syngas composition decreases the possibility of being implemented in applications where purity is critical.

Valorization Alternatives of Tropical Forest Fruits Based on the Açai (Euterpe oleracea) Processing in Small Communities.

Many plant species characterize tropical forests, and a small fraction has been studied to favor small communities in the food and medicinal fields. The high biodiversity of these regions allows for the proposed alternatives for the valorization of exotic fruits due to their rich content of value-added compounds that benefit human health. This work focuses on improving the nutritional characteristics of the açai production chain by mixing it with noni and araza. As a main result, it was possible to enhance the organoleptic and nutritional characteristics of the fruits after freeze-drying. Then, the seeds and peels of the fruits were valorized by the extraction of bioactive compounds with conventional methods and biogas production by anaerobic digestion. The best compositions of antioxidant capacity and total phenolic compounds were obtained for the extracts based on the araza peel, with values of 116.4 µmol and 276.6 mg of gallic acid per 100 g of raw material, respectively. Regarding biogas production, the anaerobic digestion performance was influenced by the C/N ratio. The experimental results were used as input to simulate small-scale processes. From a technical point of view, the scheme of açai, noni, and araza mixture (Sc. 4) showed the highest mass yields (0.84 kg products/kg RM) and energy requirement (2.54 kW/kg RM). On the other hand, the processing of single açai (Sc. 1) presented the lowest capital costs (1.37 M-USD) and operating costs (0.89 M-USD/year). However, all scenarios showed techno-economic feasibility and demonstrated the potential of these fruits to valorize the açai market.

Analysis of Single-Step Pretreatments for Lignocellulosic Platform Isolation as the Basis of Biorefinery Design.

Biorefinery feasibility is highly influenced by the early design of the best feedstock transformation pathway to obtain value-added products. Pretreatment has been identified as the critical stage in biorefinery design since proper pretreatment influences subsequent reaction, separation, and purification processes. However, many pretreatment analyses have focused on preserving and valorizing six-carbon sugars for future use in bioconversion processes, leaving aside fractions such as hemicellulose and lignin. To date, there has been no pretreatment systematization for the removal of lignocellulosic fractions. This work defines pretreatment efficacy through operational, economic, environmental, and social indicators. Thus, using the data reported in the literature, as well as the results of the simulation schemes, a multi-criteria weighting of the best-performing schemes for the isolation or removal of cellulose, hemicellulose, and lignin was carried out. As a main result, it was concluded that dilute acid is the most effective for cellulose isolation and hemicellulose removal for producing platform products based on six- and five-carbon sugars, respectively. Additionally, the kraft process is the best methodology for lignin removal and its future use in biorefineries. The results of this work help to elucidate a methodological systematization of the pretreatment efficacy in the design of biorefineries as an early feasibility stage considering sustainability aspects.