Clicking beyond suspensions: understanding thiol-ene chemistry on solid-supported MoS2.

Molecular functionalization of MoS2 has attracted a lot of attention due to its potential to afford fine-tuned hybrid materials that benefit from the power of synthetic chemistry and molecular design. Here, we report on the on-surface reaction of maleimides on bulk and molecular beam epitaxy grown single-layer MoS2, both in ambient conditions as well as ultrahigh vacuum using scanning probe microscopy.

Probing the Phase Transition to a Coherent 2D Kondo Lattice.

Kondo lattices are systems with unusual electronic properties that stem from strong electron correlation, typically studied in intermetallic 3D compounds containing lanthanides or actinides. Lowering the dimensionality of the system enhances the role of electron correlations providing a new tuning knob for the search of novel properties in strongly correlated quantum matter. The realization of a 2D Kondo lattice by stacking a single-layer Mott insulator on a metallic surface is reported. The temperature of the system is steadily lowered and by using high-resolution scanning tunneling spectroscopy, the phase transition leading to the Kondo lattice is followed. Above 27 K the interaction between the Mott insulator and the metal is negligible and both keep their original electronic properties intact. Below 27 K the Kondo screening of the localized electrons in the Mott insulator begins and below 11 K the formation of a coherent quantum electronic state extended to the entire sample, i.e., the Kondo lattice, takes place. By means of density functional theory, the electronic properties of the system and its evolution with temperature are explained. The findings contribute to the exploration of unconventional states in 2D correlated materials.

Metastable Polymorphic Phases in Monolayer TaTe2.

Polymorphic phases and collective phenomena-such as charge density waves (CDWs)-in transition metal dichalcogenides (TMDs) dictate the physical and electronic properties of the material. Most TMDs naturally occur in a single given phase, but the fine-tuning of growth conditions via methods such as molecular beam epitaxy (MBE) allows to unlock otherwise inaccessible polymorphic structures. Exploring and understanding the morphological and electronic properties of new phases of TMDs is an essential step to enable their exploitation in technological applications. Here, scanning tunneling microscopy (STM) is used to map MBE-grown monolayer (ML) TaTe2 . This work reports the first observation of the 1H polymorphic phase, coexisting with the 1T, and demonstrates that their relative coverage can be controlled by adjusting synthesis parameters. Several superperiodic structures, compatible with CDWs, are observed to coexist on the 1T phase. Finally, this work provides theoretical insight on the delicate balance between Te…Te and Ta-Ta interactions that dictates the stability of the different phases. The findings demonstrate that TaTe2 is an ideal platform to investigate competing interactions, and indicate that accurate tuning of growth conditions is key to accessing metastable states in TMDs.

Switchable molecular functionalization of an STM tip: from a Yu-Shiba-Rusinov Tip to a Kondo tip.

In this work we fabricate and characterize a functionalized superconducting (SC) Nb tip of a scanning tunnelling microscope (STM). The tip is functionalized with a Tetracyanoquinodimethane molecule (TCNQ) that accepts charge from the tip and develops a magnetic moment. As a consequence, in scanning tunnelling spectroscopy (STS), sharp, bias symmetric sub-gap states identified as Yu-Shiba-Rusinov (YSR) bound states appear against the featureless density of states of a metallic graphene on Ir(111) sample. Although the coupling regime of the magnetic impurity with the SC tip depends on the initial absorption configuration of the molecule, the interaction strength between the SC tip and the charged TCNQ molecule can be reversibly controlled by tuning the tip-sample distance. The controlled transition from one coupling regime to the other allows us to verify the relation between the energy scales of the two competing many-body effects for the functionalized tip. Quenching the SC state of the Nb tip with a magnetic field switches abruptly from a tip dominated by the YSR bound states to a Kondo tip.

Phase control and lateral heterostructures of MoTe2 epitaxially grown on graphene/Ir(111).

Engineering the growth of the different phases of two-dimensional transition metal dichalcogenides (2D-TMDs) is a promising way to exploit their potential since the phase determines their physical and chemical properties. Here, we report on the epitaxial growth of monolayer MoTe2 on graphene on an Ir(111) substrate. Scanning tunneling microscopy and spectroscopy provide insights into the structural and electronic properties of the different polymorphic phases, which remain decoupled from the substrate due to the weak interaction with graphene. In addition, we demonstrate a great control of the relative coverage of the relevant 1T' and 1H MoTe2 phases by varying the substrate temperature during the growth. In particular, we obtain large areas of the 1T' phase exclusively or the coexistence of both phases with different ratios.

Interaction of chiral L-dialanine with Cu(100).

We report on the properties of the thin films of the short peptide L-dialanine grown on Cu(100) surfaces and compare them to those of L-alanine by using surface techniques like XPS, IRRAS and STM. The first dialanine monolayer, in contact with the metallic substrate, is found to consist of whole neutral molecules in the non-zwitterionic state forming a c(2 × 4) pattern with quasi-hexagonal symmetry. The peptide bond of dialanine is preserved in the adsorption state. The ordering of the L-dialanine overlayer is shown to replicate rearrangements of the atoms of the substrate around dislocations of the latter indicating a strong molecule-surface interaction. In the multilayer regime, molecules of the second and further layers are found to be in a zwitterionic state, readily desorbing even at room temperature. The first dialanine layer is tightly bound to the substrate, begins to desorb at temperatures higher than 390 K and cracks down at the surface, transforming into a new moiety, beyond 435 K.

Conformational Control of Chemical Reactivity for Surface-Confined Ru-Porphyrins.

We assess the crucial role of tetrapyrrole flexibility in the CO ligation to distinct Ru-porphyrins supported on an atomistically well-defined Ag(111) substrate. Our systematic real-space visualisation and manipulation experiments with scanning tunnelling microscopy directly probe the ligation, while bond-resolving atomic force microscopy and X-ray standing-wave measurements characterise the geometry, X-ray and ultraviolet photoelectron spectroscopy the electronic structure, and temperature-programmed desorption the binding strength. Density-functional-theory calculations provide additional insight into the functional interface. We unambiguously demonstrate that the substituents regulate the interfacial conformational adaptability, either promoting or obstructing the uptake of axial CO adducts.

Author Correction: Polycyclic aromatic chains on metals and insulating layers by repetitive [3+2] cycloadditions.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Polycyclic aromatic chains on metals and insulating layers by repetitive [3+2] cycloadditions.

The vast potential of organic materials for electronic, optoelectronic and spintronic devices entails substantial interest in the fabrication of π-conjugated systems with tailored functionality directly at insulating interfaces. On-surface fabrication of such materials on non-metal surfaces remains to be demonstrated with high yield and selectivity. Here we present the synthesis of polyaromatic chains on metallic substrates, insulating layers, and in the solid state. Scanning probe microscopy shows the formation of azaullazine repeating units on Au(111), Ag(111), and h-BN/Cu(111), stemming from intermolecular homo-coupling via cycloaddition reactions of CN-substituted polycyclic aromatic azomethine ylide (PAMY) intermediates followed by subsequent dehydrogenation. Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry demonstrates that the reaction also takes place in the solid state in the absence of any catalyst. Such intermolecular cycloaddition reactions are promising methods for direct synthesis of regioregular polyaromatic polymers on arbitrary insulating surfaces.

On-Surface Synthesis of Nonmetal Porphyrins.

We report the on-surface synthesis of a nonmetal porphyrin, namely, silicon tetraphenylporphyrin (Si-TPP), by the deposition of atomic silicon onto a free-base TPP layer on a Ag(100) surface under ultrahigh vacuum (UHV) conditions. Scanning tunneling microscopy provides insights into the self-assembly of the TPP molecules before and after Si insertion. Silicon coordinates with all four nitrogen atoms of the TPP macrocycle and interacts with a silver atom of the substrate as confirmed by scanning tunneling spectroscopy, X-ray photoelectron spectroscopy, and complementary density functional theory calculations. The Si-TPP complex presents a saddle-shaped conformation that is stable under STM manipulation. Our study shows how protocols established for the on-surface metalation of tetrapyrroles can be adopted to achieve nonmetal porphyrins. Complementary experiments yielding Si-TPP and Ge-TPP on Ag(111) highlight the applicability to different main group elements and supports. The success of our nonmetal porphyrin synthesis procedure is further corroborated by a temperature-programmed desorption experiment, revealing the desorption of Ge-TPP. This extension of interfacial complex formation beyond metal elements opens promising prospects for new tetrapyrrole architectures with distinct properties and functionalities.

Quantitative determination of a model organic/insulator/metal interface structure.

By combining X-ray photoelectron spectroscopy, X-ray standing waves and scanning tunneling microscopy, we investigate the geometric and electronic structure of a prototypical organic/insulator/metal interface, namely cobalt porphine on monolayer hexagonal boron nitride (h-BN) on Cu(111). Specifically, we determine the adsorption height of the organic molecule and show that the original planar molecular conformation is preserved in contrast to the adsorption on Cu(111). In addition, we highlight the electronic decoupling provided by the h-BN spacer layer and find that the h-BN-metal separation is not significantly modified by the molecular adsorption. Finally, we find indication of a temperature dependence of the adsorption height, which might be a signature of strongly-anisotropic thermal vibrations of the weakly bonded molecules.

BN-Patterning of Metallic Substrates through Metal Coordination of Decoupled Borazines.

We report on the synthesis of pyridine-terminated borazine derivatives, their molecular self-assembly as well as the electronic properties investigated on silver and copper surfaces by means of scanning tunneling microscopy and X-ray photoelectron spectroscopy. The introduction of pyridine functionalities allows us to achieve distinct supramolecular architectures with control of the interdigitation of the molecules by surface templating. On silver surfaces, the borazine derivatives arrange in a dense-packed hexagonal structure through van der Waals and H-bonding interactions, whereas on Cu(111), the molecules undergo metal coordination. The porosity and coordination symmetry of the reticulated structure depends on the stoichiometric ratio between copper adatoms and the borazine ligands, permitting an unusual three-fold coordinated Cu-pyridyl network. Finally, spectroscopy measurements indicate that the borazine core is electronically decoupled from the metallic substrate. We thus demonstrate that BNC-containing molecular units can be integrated into stable metal-coordination architectures on surfaces, opening pathways to patterned, BN-doped sheets with specific functionalities, for example, regarding the adsorption of polar guest gases.

Layered Insulator/Molecule/Metal Heterostructures with Molecular Functionality through Porphyrin Intercalation.

Intercalation of molecules into layered materials is actively researched in materials science, chemistry, and nanotechnology, holding promise for the synthesis of van der Waals heterostructures and encapsulated nanoreactors. However, the intercalation of organic molecules that exhibit physical or chemical functionality remains a key challenge to date. In this work, we present the synthesis of heterostructures consisting of porphines sandwiched between a Cu(111) substrate and an insulating hexagonal boron nitride ( h-BN) monolayer. We investigated the energetics of the intercalation, as well as the influence of the capping h-BN layer on the behavior of the intercalated molecules using scanning probe microscopy and density functional theory calculations. While the self-assembly of the molecules is altered upon intercalation, we show that the intrinsic functionalities, such as switching between different porphine tautomers, are preserved. Such insulator/molecule/metal structures provide opportunities to protect organic materials from deleterious effects of atmospheric environment, can be used to control chemical reactions through spatial confinement, and give access to layered materials based on the ample availability of synthesis protocols provided by organic chemistry.

Exploration of pyrazine-embedded antiaromatic polycyclic hydrocarbons generated by solution and on-surface azomethine ylide homocoupling.

Nanographenes, namely polycyclic aromatic hydrocarbons (PAHs) with nanoscale dimensions (>1 nm), are atomically precise cutouts from graphene. They represent prime models to enhance the scope of chemical and physical properties of graphene through structural modulation and functionalization. Defined nitrogen doping in nanographenes is particularly attractive due to its potential for increasing the number of π-electrons, with the possibility of introducing localized antiaromatic ring elements. Herein we present azomethine ylide homocoupling as a strategy to afford internally nitrogen-doped, non-planar PAH in solution and planar nanographene on surfaces, with central pyrazine rings. Localized antiaromaticity of the central ring is indicated by optical absorption spectroscopy in conjunction with theoretical calculations. Our strategy opens up methods for chemically tailoring graphene and nanographenes, modified by antiaromatic dopants.

Corrugation in the Weakly Interacting Hexagonal-BN/Cu(111) System: Structure Determination by Combining Noncontact Atomic Force Microscopy and X-ray Standing Waves.

Atomically thin hexagonal boron nitride (h-BN) layers on metallic supports represent a promising platform for the selective adsorption of atoms, clusters, and molecular nanostructures. Specifically, scanning tunneling microscopy (STM) studies revealed an electronic corrugation of h-BN/Cu(111), guiding the self-assembly of molecules and their energy level alignment. A detailed characterization of the h-BN/Cu(111) interface including the spacing between the h-BN sheet and its support-elusive to STM measurements-is crucial to rationalize the interfacial interactions within these systems. To this end, we employ complementary techniques including high-resolution noncontact atomic force microscopy, STM, low-energy electron diffraction, X-ray photoelectron spectroscopy, the X-ray standing wave method, and density functional theory. Our multimethod study yields a comprehensive, quantitative structure determination including the adsorption height and the corrugation of the sp2 bonded h-BN layer on Cu(111). Based on the atomic contrast in atomic force microscopy measurements, we derive a measurable-hitherto unrecognized-geometric corrugation of the h-BN monolayer. This experimental approach allows us to spatially resolve minute height variations in low-dimensional nanostructures, thus providing a benchmark for theoretical modeling. Regarding potential applications, e.g., as a template or catalytically active support, the recognition of h-BN on Cu(111) as a weakly bonded and moderately corrugated overlayer is highly relevant.

Fusing tetrapyrroles to graphene edges by surface-assisted covalent coupling.

Surface-assisted covalent linking of precursor molecules enables the fabrication of low-dimensional nanostructures, which include graphene nanoribbons. One approach to building functional multicomponent systems involves the lateral anchoring of organic heteromolecules to graphene. Here we demonstrate the dehydrogenative coupling of single porphines to graphene edges on the same metal substrate as used for graphene synthesis. The covalent linkages are visualized by scanning probe techniques with submolecular resolution, which directly reveals bonding motifs and electronic features. Distinct configurations are identified that can be steered towards entities predominantly fused to graphene edges through two pyrrole rings by thermal annealing. Furthermore, we succeeded in the concomitant metallation of the macrocycle with substrate atoms and the axial ligation of adducts. Such processes combined with graphene-nanostructure synthesis has the potential to create complex materials systems with tunable functionalities.

Organic Covalent Patterning of Nanostructured Graphene with Selectivity at the Atomic Level.

Organic covalent functionalization of graphene with long-range periodicity is highly desirable-it is anticipated to provide control over its electronic, optical, or magnetic properties-and remarkably challenging. In this work we describe a method for the covalent modification of graphene with strict spatial periodicity at the nanometer scale. The periodic landscape is provided by a single monolayer of graphene grown on Ru(0001) that presents a moiré pattern due to the mismatch between the carbon and ruthenium hexagonal lattices. The moiré contains periodically arranged areas where the graphene-ruthenium interaction is enhanced and shows higher chemical reactivity. This phenomenon is demonstrated by the attachment of cyanomethyl radicals (CH2CN(•)) produced by homolytic breaking of acetonitrile (CH3CN), which is shown to present a nearly complete selectivity (>98%) binding covalently to graphene on specific atomic sites. This method can be extended to other organic nitriles, paving the way for the attachment of functional molecules.

Controlling coordination reactions and assembly on a Cu(111) supported boron nitride monolayer.

We report the formation of a metal-organic network on a BN/Cu(111) template by codeposition of carbonitrile-functionalized porphyrin derivatives (2H-TPCN) with Co atoms in an ultrahigh vacuum environment. The resulting metallo-supramolecular structure explored by scanning tunneling microscopy and spectroscopy features a distinct 4-fold coordination motif. Furthermore, we demonstrate an in situ metalation of the tetrapyrrole macrocycles with deposited Co atoms yielding Co-TPCN directly on the BN sheet. Our results provide perspectives for the formation of coordination networks on BN and related systems featuring structural, electronic, and magnetic properties unachievable on metallic supports.

Controlling the spatial arrangement of organic magnetic anions adsorbed on epitaxial graphene on Ru(0001).

Achieving control over the self-organization of functional molecules on graphene is critical for the development of graphene technology in organic electronic and spintronic. Here, by using a scanning tunneling microscope (STM), we show that the electron acceptor molecule 7,7',8,8'-tetracyano-p-quinodimethane (TCNQ) and its fluorinated derivative 2,3,5,6-tetrafluoro-7,7',8,8'-tetracyano-p-quinodimethane (F4-TCNQ), co-deposited on the surface of epitaxial graphene on Ru(0001), transform spontaneously into their corresponding magnetic anions and self-organize in two remarkably different structures. TCNQ forms densely packed linear magnetic arrays, while F4-TCNQ molecules remain as isolated non interacting magnets. With the help of density functional theory (DFT) calculations, we trace back the origin of this behavior in the competition between the intermolecular repulsion experienced by the individual charged anions, which tends to separate the molecules, and the delocalization of the electrons transferred from the surface to the molecules, which promotes the formation of molecular oligomers. Our results demonstrate that it is possible to control the spatial arrangement of organic magnetic anions co-adsorbed on a surface by means of chemical substitution, paving the way for the design of two-dimensional fully organic magnetic structures on graphene and on other surfaces.

Probing the site-dependent Kondo response of nanostructured graphene with organic molecules.

TCNQ molecules are used as a sensitive probe for the Kondo response of the electron gas of a nanostructured graphene grown on Ru(0001) presenting a moiré pattern. All adsorbed molecules acquired an extra electron by charge transfer from the substrate, but only those adsorbed in the FCC-Top areas of the moiré show magnetic moment and Kondo resonance in the STS spectra. DFT calculations trace back this behavior to the existence of a surface resonance in the low areas of the graphene moiré, whose density distribution strongly depends on the stacking sequence of the moiré area and effectively quenches the magnetic moment for HCP-Top sites.