Developing Eco-Friendly 3D-Printing Composite Filament: Utilizing Palm Midrib to Reinforce High-Density Polyethylene Matrix in Design Applications.

Designers actively pursue the use of novel materials and concepts in furniture and interior design. By providing insights into their processing behavior and suitability for 3D-printing processes, this research helps to highlight the potential of using waste materials to create more environmentally friendly and sustainable 3D-printing filaments that can be used in furniture and interior design. Furthermore, the study evaluates the effect of incorporating palm midrib nanoparticles (DPFNPs) to reinforce a high-density polyethylene (HDPE) matrix with different loadings such as 10, 20, 30, 40, and 50 wt.%. The composites were extruded into filaments using a manual extruder, which was then utilized to fabricate 3D-printed specimens using a 3D-printing pen. The effect of adding DPFNPs on the composite's chemical, thermal, and mechanical properties was evaluated, with a particular focus on how these modifications influence the melt flow rate (MFR) and, subsequently, the material's printability. The results revealed that HDPE and filament composites presented similar FTIR spectra. On the other hand, the filament composites presented an increase in the thermal stability and a decrease in the mechanical strength with increasing DPFNP content in the HDPE matrix. The filaments were successfully printed using a 3D-printing pen. Thus, using DPFNPs in the HDPE matrix presents a low-cost alternative for filament production and may expand 3D-printing applications in interior and furniture design with more sustainable materials. Future work will delve into optimizing these composites for improved printability and assessing their recyclability, aiming to broaden their applications in 3D printing and beyond.

Update of (40)K and (226)Ra and (232)Th series γ-to-dose conversion factors for soil.

Over the last four decades, the dose conversion factors used to calculate external exposure to γ radiation from soil from (40)K and the (226)Ra and (232)Th chains have been 0.62, 0.042 and 0.46 (nGy/h per Bq/kg), respectively. This work updates these γ-to-dose conversion factors, taking into consideration the composition, depth and radius of the soil source, and importantly, updated branching ratios, with MCNPX simulations. The new conversion factors are 0.036, 0.357 and 0.482 (nGy/h per Bq/kg) for (40)K and the (226)Ra and (232)Th chains, respectively.

Microbial production of biopolymers from the renewable resource wheat straw.

AIMS: Production of poly-ß-hydroxybutyrate (PHB) and the chemical basic compound lactate from the agricultural crop 'wheat straw' as a renewable carbon resource. METHODS AND RESULTS: A thermal pressure hydrolysis procedure for the breakdown of wheat straw was applied. By this means, the wheat straw was converted into a partially solubilized hemicellulosic fraction, consisting of sugar monomers, and an insoluble cellulosic fraction, containing cellulose, lignin and a small portion of hemicellulose. The insoluble cellulosic fraction was further hydrolysed by commercial enzymes in monomers. The production of PHB from the sugar monomers originating from hemicellulose or cellulose was achieved by the isolates Bacillus licheniformis IMW KHC 3 and Bacillus megaterium IMW KNaC 2. The basic chemical compound, lactate, a starting compound for the production of polylactide (PLA), was formed by some heterofermentative lactic acid bacteria (LAB) able to grow with xylose from the hemicellulosic wheat straw hydrolysate. CONCLUSIONS: Two strains were selected which were able to produce PHB from the sugars both from the hemicellulosic and the cellulosic fraction of the wheat straw. In addition, some of the LAB tested were capable of producing lactate from the hemicellulosic hydrolysate. SIGNIFICANCE AND IMPACT OF THE STUDY: The renewable resource wheat straw could serve as a substrate for microbiologically produced basic chemicals and biodegradable plastics.

Measurement of the neutron radius of 208Pb through parity violation in electron scattering.

We report the first measurement of the parity-violating asymmetry A(PV) in the elastic scattering of polarized electrons from 208Pb. A(PV) is sensitive to the radius of the neutron distribution (R(n)). The result A(PV)=0.656±0.060(stat)±0.014(syst) ppm corresponds to a difference between the radii of the neutron and proton distributions R(n)-R(p)=0.33(-0.18)(+0.16) fm and provides the first electroweak observation of the neutron skin which is expected in a heavy, neutron-rich nucleus.

Altered expression of GABA(A) and GABA(B) receptor subunit mRNAs in the hippocampus after kindling and electrically induced status epilepticus.

Epilepsy may result from altered transmission of the principal inhibitory transmitter GABA in the brain. Using in situ hybridization in two animal models of epileptogenesis, we investigated changes in the expression of nine major GABA(A) receptor subunits (alpha1, alpha2, alpha4, alpha5, beta1-beta3, gamma2 and delta) and of the GABA(B) receptor species GABA(B)R1a, GABA(B)R1b and GABA(B)R2 in 1) hippocampal kindling and 2) epilepsy following electrically-induced status epilepticus (SE). Hippocampal kindling triggers a decrease in seizure threshold without producing spontaneous seizures and hippocampal damage, whereas the SE model is characterized by spontaneous seizures and hippocampal damage. Changes in the expression of GABA(A) and GABA(B) receptor mRNAs were observed in both models, and compared with those seen in other models and in human temporal lobe epilepsy. The most prominent changes were a relatively fast (24 h after kindling and electrically-induced SE) and lasting (7 and 30 days after termination of kindling and SE, respectively) reduction of GABA(A) receptor subunit delta mRNA levels (by 43-78%) in dentate granule cells, accompanied by increases in mRNA levels of all three beta-subunits (by 8-79%) and subunit gamma2 (by 11-43%). Levels of the minor subunit alpha4 were increased by up to 60% in dentate granule cells in both animal models, whereas those of subunit alpha5 were decreased 24 h and 30 days after SE, but not after kindling. In cornu ammonis 3 pyramidal cells, downregulation of subunits alpha2, alpha4, alpha5, and beta1-3 was observed in the ventral hippocampus and of alpha2, alpha5, beta3 and gamma2 in its dorsal extension 24 h after SE. Similar but less pronounced changes were seen in sector cornu ammonis 1. Persistent decreases in subunit alpha2, alpha4 and beta2 transcript levels were presumably related to SE-induced cell loss. GABA(B) receptor expression was characterized by increases in GABA(B)R2 mRNA levels at all intervals after kindling and SE. The observed changes suggest substantial and cell specific rearrangement of GABA receptors. Lasting downregulation of subunits delta and alpha5 in granule cells and transient decreases in subunit alpha2 and beta1-3 mRNA levels in cornu ammonis 3 pyramidal cells are suggestive of impaired GABA(A) receptor-mediated inhibition. Persistent upregulation of subunits beta1-3 and gamma2 of the GABA(A) receptor and of GABA(B)R2 mRNA in granule cells, however, may result in activation of compensatory anticonvulsant mechanisms.

Detection of platelet-activating factor in gingival tissue surrounding failed dental implants.

BACKGROUND: Dental implant therapy has entered routine clinical practice. However, the failure rate of implants at 5 years, due to biological factors, is still around 7%. The pathogenesis of implant loss involves a complex network of cells and inflammatory mediators. This study evaluated platelet-activating factor (PAF), a potent phospholipid mediator of inflammation, in soft tissue surrounding failed dental implants versus healthy implants. METHODS: PAF was estimated on extracted lipids by bioassay on washed rabbit platelets; inflammatory cell populations were assessed semiquantitatively after staining, and microvessel density was evaluated after immunohistochemical staining. RESULTS: Biologically active PAF was detected in the lipid extracts of samples excised from gingival tissue of patients with failed implants, but not in samples from patients with osseointegrated implants or from healthy edentulous subjects. The amount of PAF detected in failed implants was significantly higher than in healthy implants, suggesting a local production of this mediator. CONCLUSIONS: The presence of PAF was associated with histopathological findings of local inflammation and increased blood vessel density.

The preparation of a reference serum for the determination of IgG and IgM antibodies against cytomegalovirus and its evaluation in a collaborative trial.

It is now generally accepted that laboratory data produced by different laboratories using different techniques can be better compared if the results are related to a reference preparation. Even within one laboratory the use of a stable reference preparation helps to reduce the day to day variation of the results. Although this idea has been firmly established for many years the introduction of reference preparations so far has met only with limited success. One of the reasons for this development may be the lack of adequate preparation to be used for this purpose. Recently, diagnostic virology has introduced new serological methods in an effort to make a rapid diagnosis and to differentiate between acute and past infection by the determination of specific antibodies in the IgM, IgA or IgE fraction of the patient's serum. In such a situation, a reference IgM serum of low activity would help to differentiate between persistent or past and recent infection. It was therefore attempted to establish such a reference serum containing antibodies against CMV in the IgM fraction.