Microwave fractional Hilbert transformer implemented in a dispersion-tailored few-mode fiber.

We experimentally demonstrate, for the first time to our knowledge, a microwave fractional Hilbert transformer in a few-mode fiber using a transversal filtering approach. The filter taps are provided by a tunable true-time delay line that is realized by exploiting the spatial dimension of a dispersion-engineered double-clad step-index few-mode fiber. Both the fractional order and operational bandwidth of the fractional Hilbert transformer can be continuously tuned by adjusting the tap coefficients and varying the operational optical wavelength, respectively. The magnitude and phase response for different fractional orders, ranging from 0.17 to 1.00 that correspond to phase shifts of 15° to 90°, are measured. Operational bandwidths of 7.4 to 10.6 GHz are demonstrated for a classical Hilbert transformer. Real-time temporal fractional Hilbert transform of a Gaussian-like pulse is also performed. Our results are in good agreement with theory, validating the viability of our approach for implementation of microwave fractional Hilbert transformers.

Heterogeneous multicore fiber-based microwave frequency measurement.

A novel microwave frequency measurement scheme using a heterogeneous multicore fiber (MCF) is experimentally demonstrated. The inherently different relative group delays among the cores of a heterogeneous 7-core MCF are used to realize two individual 2-tap microwave filters with different free spectral ranges (FSRs). The ratio of the frequency response traces of these two filters is used to establish an amplitude comparison function (ACF). Furthermore, by varying the operational wavelength, the relative group delays between the cores and consequently the FSRs of the filters are tuned and different ACF curves are obtained. The complementary information provided by these different ACFs allows us to estimate the unknown frequency with an improved accuracy, over a broad measurement range. In our experiments, a measurement error of ±71 MHz is achieved over a frequency range of 0.5-40 GHz. The proposed scheme offers flexibility and compactness, thanks to the parallelism provided by the MCF.

Experimental demonstration of dispersion-diversity multicore fiber optical beamforming.

Phased array antenna (PAA) beam-steering in high radiofrequency bands will be key for upcoming 5G & Beyond wireless communications systems. As a compact and efficient solution to provide tunable beam steering simultaneously to parallel antenna distribution and connectivity, we experimentally demonstrate, for the first time to our knowledge, tunable optical beamforming implemented on a dispersion-diversity multicore optical fiber. The uniqueness of this fiber lies in the fact that each one of its seven step-index trench-assisted cores has been tailored to provide the required chromatic dispersion to enable tunable optical true-time delay line operation. Continuous 1D beam-steering was demonstrated by measuring the radiating pattern of an in-house fabricated 8-element PAA in an anechoic chamber at the radiofrequency of 26 GHz, sweeping the beam-pointing angle from -43° up to 40° by varying the operating optical wavelength from 1542.50 up to 1548.28 nm. Next-generation fiber-wireless communications systems will benefit from the demonstrated dispersion-diversity MCF optical beamforming in terms of flexibility, versatility, capacity, and connectivity along with reduced size, weight, and power consumption.

Dispersion-Diversity Multicore Fiber Signal Processing.

Beyond playing a primary role in high-capacity communication networks, multicore optical fibers can bring many advantages to optical and microwave signal processing, as not only space but also chromatic dispersion are introduced as new degrees of freedom. The key lies in developing radically new multicore fibers where the refractive index profile of each individual core is tailored properly to provide parallel dispersion-diversity signal processing with application in a variety of scenarios such as parallel channel equalization, analogue-to-digital conversion, optical computing, pulse generation and shaping, multiparameter fiber sensing, medical imaging, optical coherence tomography, broadband measurement instrumentation, and next-generation fiber-wireless communications. Here, we experimentally prove, for the first time to our knowledge, reconfigurable two-dimensional dispersion-managed signal processing performed by a novel dispersion-diversity heterogeneous multicore fiber. The fiber comprises seven different trench-assisted cores featuring a different refractive index profile in terms of both radial geometry and core dopant concentration. As a representative application case, we demonstrate reconfigurable microwave signal filtering with increased compactness as well as performance flexibility and versatility as compared to previous technologies.

On-chip optical true time delay lines based on subwavelength grating waveguides.

An optical true time delay line (OTTDL) is a fundamental building block for signal processing applications in microwave photonics and optical communications. Here, we experimentally demonstrate an index-variable OTTDL based on an array of 40 subwavelength grating (SWG) waveguides in silicon-on-insulator. Each SWG waveguide in the array is 34 mm long and arranged in a serpentine manner; the average incremental delay between waveguides is about 4.7 ps, and the total delay between the first and last waveguides is approximately 181.9 ps. The waveguide array occupies a chip area of ∼6.5mm×8.7mm=56.55mm2. The proposed OTTDLs bring potential advantages in terms of compactness as well as operation versatility to a variety of microwave signal processing applications.

Dispersion-tailored few-mode fiber design for tunable microwave photonic signal processing.

We present a novel double-clad step-index few-mode fiber that operates as a five-sampled tunable true-time delay line. The unique feature of this design lies in its particular modal chromatic dispersion behavior, which varies in constant incremental steps among adjacent groups of modes. This property, which to the best of our knowledge has not been reported in any other few-mode fiber to date, is the key to tunable operation of radiofrequency signal processing functionalities implemented in few-mode fibers. The performance of the designed true-time delay line is theoretically evaluated for two different microwave photonics applications, namely tunable signal filtering and optical beamforming networks for phased array antennas. In the 35-nm optical wavelength tuning range of the C-band, the free spectral range of the microwave filter and the beam-pointing angle in the phased array antenna can be continuously tuned from 12.4 up to 57 GHz and 12.6° up to 90°, respectively.

Bending and twisting effects on multicore fiber differential group delay.

In this paper we provide the theoretical and experimental evaluation of fiber bending and twisting effects on the group delay performance of a homogeneous 7-core fiber. We have experimentally evaluated the differential group delay between the central and outer cores for different curvature radii and twisting conditions, demonstrating that fiber twisting counteracts the degradation introduced by the curvature itself. These findings are generally applicable to time-sensitive application areas such as radio-over-fiber distribution and microwave photonics signal processing in fiber-wireless access networks, as well as high-capacity long-haul digital communications where digital multiple-input multiple-output processing may be required.

Ring-core few-mode fiber for tunable true time delay line operation.

We propose, for the first time to our knowledge, tunable true time delay line operation for radiofrequency signals on a few-mode fiber link. In particular, the custom design of a 7-LP-mode ring-core few-mode fiber together with a set of 5 broadband long period gratings inscribed at the proper positions along the fiber allows 4-sample true time delay line tunability over a 20-nm optical wavelength range. We study the performance of the designed true time delay line in the context of reconfigurable microwave photonics signal processing by theoretically evaluating microwave signal filtering and optical beamforming networks for phased array antennas.

Sampled true time delay line operation by inscription of long period gratings in few-mode fibers.

We propose and experimentally demonstrate distributed microwave photonics signal processing over a few-mode fiber link by implementing 4-sample true time delay line operation. The inscription of a set of long period gratings at specific locations along the few-mode fiber allows the excitation of the higher-order modes while adjusting the individual sample group delays and amplitudes that are required for sampled true time delay line behavior. Since solely the injection of the fundamental mode at the few-mode fiber input is required, we render this signal processing system independent of any preceding fiber link that may be required in addition to distribute the signal. We experimentally validate the performance of the implemented true time delay line when applied to radiofrequency signal filtering.

Modeling optical fiber space division multiplexed quantum key distribution systems.

We report a model to use to evaluate the performance of multiple quantum key distribution (QKD) channel transmission using spatial division multiplexing (SDM) in multicore (MCF) and few-mode fibers (FMF). This model is then used to analyze the feasibility of QKD transmission in 7-core MCFs in two practical scenarios involving the (1) transmission of only QKD channels and (2) simultaneous transmission of QKD and classical channels. In the first case, standard homogeneous MCFs enable transmission distances per core compatible with transmission parameters (distance and net key rate) very close to those of single-core single-mode fibers. For the second case, heterogeneous MCFs must be employed to make this option feasible.

Few-mode fiber true time delay lines for distributed radiofrequency signal processing.

We report, for the first time to our knowledge, distributed radiofrequency signal processing built upon true time delay operation on a step-index few-mode fiber. Two 3-sample configurations with different time delay properties are implemented over the same 60-meter 4-LP-mode fiber link. The inscription of a long period grating at a specific fiber position converts part of the LP01 mode into the LP02, permitting sample time delay engineering. Delay line performance is experimentally demonstrated when applied to radiofrequency signal filtering, example of fiber-distributed processing functionality exhibiting one order or magnitude gain in terms of compactness.

Field-programmable photonic arrays.

We propose a new programmable integrated photonic device, the Field Programmable Photonic Array, which follows a similar rationale as that of Field Programmable Gate Arrays and Field Programmable Analog Arrays in electronics. This high-level concept, basic photonic building blocks, design principles, and technology and physical implementation are discussed. Experimental evidence of its feasibility is also provided.

Author Correction: Multipurpose silicon photonics signal processor core.

Change History: A correction to this article has been published and is linked from the HTML version of this article.

Experimental demonstration of multi-cavity optoelectronic oscillation over a multicore fiber.

We report, for the first time to our knowledge, the experimental demonstration of multi-cavity optoelectronic oscillators where the cavities are provided by the different cores of a multicore fiber. We implemented two multi-cavity architectures over a 20-m-long 7-core fiber link: unbalanced dual-cavity oscillation (the cavity lengths are a multiple of a reference value) and multi-cavity Vernier oscillation (the cavity lengths are slightly different). Since all the cavities are hosted under a single fiber cladding and are subject to the same environmental and mechanical conditions, optoelectronic oscillators built upon multicore fibers benefit from improved performance stability as compared to independent singlemode fiber cavities.

Multipurpose silicon photonics signal processor core.

Integrated photonics changes the scaling laws of information and communication systems offering architectural choices that combine photonics with electronics to optimize performance, power, footprint, and cost. Application-specific photonic integrated circuits, where particular circuits/chips are designed to optimally perform particular functionalities, require a considerable number of design and fabrication iterations leading to long development times. A different approach inspired by electronic Field Programmable Gate Arrays is the programmable photonic processor, where a common hardware implemented by a two-dimensional photonic waveguide mesh realizes different functionalities through programming. Here, we report the demonstration of such reconfigurable waveguide mesh in silicon. We demonstrate over 20 different functionalities with a simple seven hexagonal cell structure, which can be applied to different fields including communications, chemical and biomedical sensing, signal processing, multiprocessor networks, and quantum information systems. Our work is an important step toward this paradigm.Integrated optical circuits today are typically designed for a few special functionalities and require complex design and development procedures. Here, the authors demonstrate a reconfigurable but simple silicon waveguide mesh with different functionalities.

Spatial Division Multiplexed Microwave Signal processing by selective grating inscription in homogeneous multicore fibers.

The use of Spatial Division Multiplexing for Microwave Photonics signal processing is proposed and experimentally demonstrated, for the first time to our knowledge, based on the selective inscription of Bragg gratings in homogeneous multicore fibers. The fabricated devices behave as sampled true time delay elements for radiofrequency signals offering a wide range of operation possibilities within the same optical fiber. The key to processing flexibility comes from the implementation of novel multi-cavity configurations by inscribing a variety of different fiber Bragg gratings along the different cores of a 7-core fiber. This entails the development of the first fabrication method to inscribe high-quality gratings characterized by arbitrary frequency spectra and located in arbitrary longitudinal positions along the individual cores of a multicore fiber. Our work opens the way towards the development of unique compact fiber-based solutions that enable the implementation of a wide variety of 2D (spatial and wavelength diversity) signal processing functionalities that will be key in future fiber-wireless communications scenarios. We envisage that Microwave Photonics systems and networks will benefit from this technology in terms of compactness, operation versatility and performance stability.

Third-order linearization for self-beating filtered microwave photonic systems using a dual parallel Mach-Zehnder modulator.

We develop, analyze and apply a linearization technique based on dual parallel Mach-Zehnder modulator to self-beating microwave photonics systems. The approach enables broadband low-distortion transmission and reception at expense of a moderate electrical power penalty yielding a small optical power penalty (<1 dB).

Dispersion-engineered multicore fibers for distributed radiofrequency signal processing.

We report a trench-assisted heterogeneous multicore fiber optimized in terms of higher-order dispersion and crosstalk for radiofrequency true time delay operation. The analysis of the influence of the core refractive index profile on the dispersion slope and effective index reveals a tradeoff between the behavior of the crosstalk against fiber curvatures and the linearity of the propagation group delay. We investigate the optimization of the multicore fiber in the framework of this tradeoff and present a design that features a group delay relative error below 5% for an optical wavelength range up to 100 nm and a crosstalk level below -80 dB for bending radii larger than 103 mm. The performance of the true time delay line is validated in the context of microwave signal filtering and optical beamforming for phased array antennas. This work opens the way towards the development of compact fiber-integrated solutions that enable the implementation of a variety of distributed signal processing functionalities that will be key in future fiber-wireless communications networks and systems.

Reconfigurable lattice mesh designs for programmable photonic processors.

We propose and analyse two novel mesh design geometries for the implementation of tunable optical cores in programmable photonic processors. These geometries are the hexagonal and the triangular lattice. They are compared here to a previously proposed square mesh topology in terms of a series of figures of merit that account for metrics that are relevant to on-chip integration of the mesh. We find that that the hexagonal mesh is the most suitable option of the three considered for the implementation of the reconfigurable optical core in the programmable processor.

Subwavelength grating enabled on-chip ultra-compact optical true time delay line.

An optical true time delay line (OTTDL) is a basic photonic building block that enables many microwave photonic and optical processing operations. The conventional design for an integrated OTTDL that is based on spatial diversity uses a length-variable waveguide array to create the optical time delays, which can introduce complexities in the integrated circuit design. Here we report the first ever demonstration of an integrated index-variable OTTDL that exploits spatial diversity in an equal length waveguide array. The approach uses subwavelength grating waveguides in silicon-on-insulator (SOI), which enables the realization of OTTDLs having a simple geometry and that occupy a compact chip area. Moreover, compared to conventional wavelength-variable delay lines with a few THz operation bandwidth, our index-variable OTTDL has an extremely broad operation bandwidth practically exceeding several tens of THz, which supports operation for various input optical signals with broad ranges of central wavelength and bandwidth.