Exploring Biopharmaceutical Analysis with Compact Capillary Liquid Chromatography Instrumentation.

A recent trend in the design of liquid chromatography (LC) instrumentation is the move towards miniaturized and portable systems. These smaller platforms provide wider flexibility in operation, with the opportunity for conducting analysis directly at the point of sample collection rather than transporting the sample to a centralized laboratory facility. For the manufacturing of pharmaceutical and biopharmaceutical products, these platforms can be implemented for process monitoring and product characterization directly in manufacturing environments. This article describes a portable, miniaturized LC instrument coupled to a mass spectrometer (MS) for characterization of a biopharmaceutical monoclonal antibody (mAb).

Column selection considerations in compact capillary liquid chromatography.

Recent years have seen significant advances in compact, portable capillary LC instrumentation. This study explores the performances of several commercially available columns within the pressure and flow limits of both the columns and one of these compact LC instruments. The commercially available compact capillary LC system with UV-absorbance detector used in this study is typically operated using columns in the 0.15-0.3 mm internal diameter (i.d.) range. Efficiency measurements (i.e., theoretical plates, N) for six columns with i.d.s in this range and of varying lengths and pressure limits, packed with stationary phases of different particle diameters and morphologies, were made using a mixture of standard alkylphenones. Kinetic plot comparisons between columns that vary by one (or more) of these parameters are described, along with calculated kinetic performance and Knox-Saleem limits. These theoretical performance descriptions provide insight into optimal operating conditions when using capillary LC systems. Based on kinetic plot evaluation of available capillary columns in the 0.2-0.3 mm i.d. range with a conservative upper pressure limit of 330 bar packed with superficially porous particles, a 25 cm column could generate ∼47,000 plates in 7.85 min when operated at 2.4 µL/min. For comparison, more robust 0.3 mm i.d. columns (packed with fully porous particles) that can be operated at higher pressures than can be provided by the pumping system (conservative pump upper pressure limit of 570 bar), a ∼20 cm column could generate nearly 40,000 plates in 5.9 min if operated at 6 µL/min. Across all capillary LC columns measured, higher pressure limits and shorter columns can provide the best throughput when considering both speed and efficiency.

DNA-templated lithography and nanofabrication for the fabrication of nanoscale electronic circuitry.

The field of structural DNA nanotechnology has undergone significant expansion in recent years as exciting new techniques and understanding have been developed, allowing for the design and assembly of complex and intricate two- and three-dimensional nanostructures. Many of these designed DNA motifs have found use in precise positioning of nanomaterials and thereby can aid in studies, reactions, and assembly of other nanostructures. This review discusses the history and progression of DNA-based nanofabrication with an emphasis on the use of DNA nanostructures for electronics applications.

Site-specific metallization of multiple metals on a single DNA origami template.

This work examines the selective deposition of two different metals on a single DNA origami template that was designed and assembled to direct the deposition. As a result, we were able to direct copper and gold to predesignated locations on the template, as verified by both compositional and morphological data, to form a heterogeneous Cu-Au junction. Seeding and deposition were performed in sequential steps. An enabling aspect of this work was the use of an organic layer or "chemical mask" to prevent unwanted deposition during the deposition of the second metal. In light of recent efforts in the field, the ability to localize components of different composition and structure to specific sections of a DNA template represents an important step forward in the fabrication of nanostructures based on DNA templates.

Electrically conductive gold- and copper-metallized DNA origami nanostructures.

This work demonstrates the use of a circuit-like DNA origami structure as a template to fabricate conductive gold and copper nanostructures on Si surfaces. We improved over previous results by using multiple Pd seeding steps to increase seed uniformity and density. Our process has also been characterized through atomic force microscopy, particle size distribution analysis, and scanning electron microscopy. We found that four successive Pd seeding steps yielded the best results for electroless metal plating on DNA origami. Electrical resistance measurements were done on both Au- and Cu-metallized nanostructures, with each showing ohmic behavior. Gold-plated DNA origami structures made under optimal conditions had an average resistivity of 7.0 × 10(-5) Ω·m, whereas copper-metallized structures had a resistivity as low as 3.6 × 10(-4) Ω·m. Importantly, this is the first demonstration of electrically conductive Cu nanostructures fabricated on either DNA or DNA origami templates. Although resistivities for both gold and copper samples were larger than those of the bulk metal, these metal nanostructures have the potential for use in electrically connecting small structures. In addition, these metallized objects might find use in surface-enhanced Raman scattering experiments.