Reversible O-H Bond Activation by Tripodal tris(Nitroxide) Aluminum and Gallium Complexes.

Herein, we report the preparation and characterization of the Group 13 metal complexes of a tripodal tris(nitroxide)-based ligand, designated (TriNOx3-)M (M = Al (1), Ga (2), In (3)). Complexes 1 and 2 both activate the O-H bond of a range of alcohols spanning a ∼10 pKa unit range via an element-ligand cooperative pathway to afford the zwitterionic complexes (HTriNOx2-)M-OR. Structures of these alcohol adduct products are discussed. We demonstrate that the thermodynamic and kinetic aspects of the reactions are both influenced by the identity of the metal, with 1 having higher reaction equilibrium constants and proceeding at a faster rate relative to 2 for any given alcohol. These parameters are also influenced by the pKa of the alcohol, with more acidic alcohols reacting both to more completion and faster than their less acidic counterparts. Possible mechanistic pathways for the O-H activation are discussed.

Vanadium Alkylidyne Initiated Cyclic Polymer Synthesis: The Importance of a Deprotiovanadacyclobutadiene Moiety.

Reported is the catalytic cyclic polymer synthesis by a 3d transition metal complex: a V(V) alkylidyne, [(dBDI)V≡CtBu(OEt2)] (1-OEt2), supported by the deprotonated ß-diketiminate dBDI2- (dBDI2- = ArNC(CH3)CHC(CH2)NAr, Ar = 2,6-iPr2C6H3). Complex 1-OEt2 is a precatalyst for the polymerization of phenylacetylene (PhCCH) to give cyclic poly(phenylacetylene) (c-PPA), whereas its precursor, complex [(BDI)V≡CtBu(OTf)] (2-OTf; BDI- = [ArNC(CH3)]2CH, Ar = 2,6-iPr2C6H3, OTf = OSO2CF3), and the zwitterion [((C6F5)3B-dBDI)V≡CtBu(OEt2)] (3-OEt2) exhibit low catalytic activity despite having a neopentylidyne ligand. Cyclic polymer topologies were verified by size-exclusion chromatography (SEC) and intrinsic viscosity studies. A component of the mechanism of the cyclic polymerization reaction was probed by isolation and full characterization of 4- and 6-membered metallacycles as model intermediates. Metallacyclobutadiene (MCBD) and deprotiometallacyclobutadiene (dMCBD) complexes (dBDI)V[C(tBu)C(H)C(tBu)] (4-tBu) and (BDI)V[C(tBu)CC(Mes)] (5-Mes), respectively, were synthesized upon reaction with bulkier alkynes, tBu- (tBuCCH) and Mes-acetylene (MesCCH), with 1-OEt2. Furthermore, the reaction of the conjugate acid of 1-OEt2, [(BDI)V≡CtBu(OTf)] (2-OTf), with the conjugated base of phenylacetylene, lithium phenylacetylide (LiCCPh), yields the doubly deprotio-metallacycle complex, [Li(THF)4]{(BDI)V[C(Ph)CC(tBu)CC(Ph)]} (6). Protonation of the doubly deprotio-metallacycle complex 6 yields 6-H+, a catalytically active species toward the polymerization of PhCCH, for which the polymers were also confirmed to be cyclic by SEC studies. Computational mechanistic studies complement the experimental observations and provide insight into the mechanism of cyclic polymer growth. The noninnocence of the supporting dBDI2- ligand and its role in proton shuttling to generate deprotiometallacyclobutadiene (dMCBD) complexes that proposedly culminate in the formation of catalytically active V(III) species are also discussed. This work demonstrates how a dMCBD moiety can react with terminal alkynes to form cyclic polyalkynes.

Metallacyclobuta-(2,3)-diene: A Bidentate Ligand for Stream-line Synthesis of First Row Transition Metal Catalysts for Cyclic Polymerization of Phenylacetylene.

Described here is a direct entry to two examples of 3d transition metal catalysts that are active for the cyclic polymerization of phenylacetylene, namely, [(BDI)M{κ2 -C,C-(Me3 SiC3 SiMe3 )}] (2-M) (BDI=[ArNC(CH3 )]2 CH- , Ar=2,6-i Pr2 C6 H3 ; M=Ti, V). Catalysts are prepared in one step by the treatment of [(BDI)MCl2 ] (1-M, M=Ti, V) with 1,3-dilithioallene [Li2 (Me3 SiC3 SiMe3 )]. Complexes 2-M have been spectroscopically and structurally characterized and the polymers that are catalytically formed from phenylacetylene were verified to have a cyclic topology based on a combination of size-exclusion chromatography (SEC) and intrinsic viscosity studies. Two-electron oxidation of 2-V with nitrous oxide (N2 O) cleanly yields a [VV ] alkylidene-alkynyl oxo complex [(BDI)V(=O){κ1 -C-(=C(SiMe3 )CC(SiMe3 ))}] (3), which lends support for how this scaffold in 2-M might be operating in the polymerization of the terminal alkyne. This work demonstrates how alkylidynes can be circumvented using 1,3-dianionic allene as a segue into M-C multiple bonds.

Observing Similarities and Differences in the Properties of Isostructural Niobium(V)/Tantalum(V) Coordination Compounds with Strong Pi-Donor Ligands.

While niobium and tantalum are found together in their mineral ores, their respective applications in technology require chemical separation. Nb/Ta separations are challenging due to the similar reactivities displayed by these metals in the solution phase. Coordination complexes of these metals have been studied in the contexts of catalysis, small-molecule activation, and functional group insertion reactivity; relatively few studies exist directly comparing the properties of isostructural Nb/Ta complexes. Such comparisons advance the development of Nb/Ta separation chemistry through the potential for differential reactivity. Here, we explore fundamental physicochemical properties in extensively characterized Nb/Ta coordination complexes [Na(DME)3][MClamp], (Clamp6- = tris-(2-(3',5'-di-tert-butyl-2'-oxyphenyl)amidophenyl)amine; M = Nb, Ta) to advance the understanding of the different electronic, optical, and excited-state properties that these metals exhibit in pi-loaded coordination complexes.

Tellurolate: an effective Te-atom transfer reagent to prepare the triad of group 5 metal bis(tellurides).

We show in this work how lithium tellurolate Li(X)nTeCH2SiMe3 (X = THF, n = 1, 1; X = 12-crown-4, n = 2, 2), can serve as an effective Te-atom transfer reagent to all group 5 transition metal halide precursors irrespective of the oxidation state. Mononuclear and bis(telluride) complexes, namely (PNP)M(Te)2 (M = V; Nb, 3; Ta, 4; PNP- = N[2-PiPr2-4-methylphenyl]2), are reported herein including structural and spectroscopic data. Whereas the known complex (PNP)V(Te)2 can be readily prepared from the trivalent precursor (PNP)VCl2, two equiv. of tellurolate, and elemental Te partially solubilized with PMe3, complex 3 can also be similarly obtained following the same procedure but with or without a reductant, Na/NaCl. Complex 4 on the other hand is formed from the addition of four equiv. of tellurolate to (PNP)TaF4. Having access to a triad of (PNP)M(Te)2 systems for group 5 metals has allowed us to compare them using a combination of theory and spectroscopy including Te-L1 edge XANES data.

Investigating Metal-Metal Bond Polarization in a Heteroleptic Tris-Ylide Diiron System.

This article describes the synthesis, characterization, and S-atom transfer reactivity of a series of C3v-symmetric diiron complexes. The iron centers in each complex are coordinated in distinct ligand environments, with one (FeN) bound in a pseudo-trigonal bipyramidal geometry by three phosphinimine nitrogens in the equatorial plane, a tertiary amine, and the second metal center (FeC). FeC is coordinated, in turn, by FeN, three ylidic carbons in a trigonal plane, and, in certain cases, by an axial oxygen donor. The three alkyl donors at FeC form through the reduction of the appended N═PMe3 arms of the monometallic parent complex. The complexes were studied crystallographically, spectroscopically (NMR, UV-vis, and Mössbauer), and computationally (DFT, CASSCF) and found to be high-spin throughout, with short Fe-Fe distances that belie weak orbital overlap between the two metals. Further, the redox nature of this series allowed for the determination that oxidation is localized to the FeC. S-atom transfer chemistry resulted in the formal insertion of a S atom into the Fe-Fe bond of the reduced diiron complex to form a mixture of Fe4S and Fe4S2 products.

Isostructural bridging diferrous chalcogenide cores [FeII(µ-E)FeII] (E = O, S, Se, Te) with decreasing antiferromagnetic coupling down the chalcogenide series.

Iron compounds containing a bridging oxo or sulfido moiety are ubiquitous in biological systems, but substitution with the heavier chalcogenides selenium and tellurium, however, is much rarer, with only a few examples reported to date. Here we show that treatment of the ferrous starting material [(tBupyrpyrr2)Fe(OEt2)] (1-OEt2) (tBupyrpyrr2 = 3,5-tBu2-bis(pyrrolyl)pyridine) with phosphine chalcogenide reagents E = PR3 results in the neutral phosphine chalcogenide adduct series [(tBupyrpyrr2)Fe(EPR3)] (E = O, S, Se; R = Ph; E = Te; R = tBu) (1-E) without any electron transfer, whereas treatment of the anionic starting material [K]2[(tBupyrpyrr2)Fe2(µ-N2)] (2-N2) with the appropriate chalcogenide transfer source yields cleanly the isostructural ferrous bridging mono-chalcogenide ate complexes [K]2[(tBupyrpyrr2)Fe2(µ-E)] (2-E) (E = O, S, Se, and Te) having significant deviation in the Fe-E-Fe bridge from linear in the case of E = O to more acute for the heaviest chalcogenide. All bridging chalcogenide complexes were analyzed using a variety of spectroscopic techniques, including 1H NMR, UV-Vis electronic absorbtion, and 57Fe Mössbauer. The spin-state and degree of communication between the two ferrous ions were probed via SQUID magnetometry, where it was found that all iron centers were high-spin (S = 2) FeII, with magnetic exchange coupling between the FeII ions. Magnetic studies established that antiferromagnetic coupling between the ferrous ions decreases as the identity of the chalcogen is tuned from O to the heaviest congener Te.

Evaluating the photophysical and photochemical characteristics of green-emitting cerium(III) mono-cyclooctatetraenide complexes.

The photophysical and photochemical reactivity of the organometallic mono(cyclooctatetraenide)-Ce(III) complexes: [(C8H8)Ce(µ-X)(THF)2]2 X = O3SCF3- (1), Cl- (2), were studied. In the course of these studies, a new polymorph of [(C8H8)Ce(µ-O3SCF3)(THF)2]2 (1) was described. Photoluminescence (PL) studies of 1 and 2 showed characteristic excitation and emission bands in the visible region, with bright green light emission under light irradiation from states corresponding to the 5d → 4f transition. Complexes 1 and 2 exhibit relatively long lifetime of 205.4 ± 0.2 and 145.8 ± 0.4 ns respectively. And the quantum yields (Φ) for 1 and 2 are 0.180 and 0.068 respectively. Electrochemical studies were performed on complexes 1 and 2 with a reversible Ce(III)/Ce(IV) redox couple recorded at E1/2 = -1.53 V versus the Fc/Fc+ for 2. Complex 1 shows an irreversible Ce(III/IV) oxidation wave. Complexes 1 and 2 revealed strongly-reducing, estimated, excited state reduction potentials of -3.31 and -4.02 V versus the Fc/Fc+ respectively, with small Stokes shifts of 0.12 eV. With their associated relatively long lifetimes, small Stokes shifts and large, negative values, both complexes were evaluated as potential photosensitisers for halogen atom transfer (XAT) using a test reaction of the dehalogenation of benzyl chloride.

Silica Supported Organometallic IrI Complexes Enable Efficient Catalytic Methane Borylation.

Catalytic C-H borylation is an attractive method for the conversion of the most abundant hydrocarbon, methane (CH4), to a mild nucleophilic building block. However, existing CH4 borylation catalysts often suffer from low turnover numbers and conversions, which is hypothesized to result from inactive metal hydride agglomerates. Herein we report that the heterogenization of a bisphosphine molecular precatalyst, [(dmpe)Ir(cod)CH3], onto amorphous silica dramatically enhances its performance, yielding a catalyst that is 12-times more efficient than the current standard for CH4 borylation. The catalyst affords over 2000 turnovers at 150 °C in 16 h with a selectivity of 91.5% for mono- vs diborylation. Higher catalyst loadings improve yield and selectivity for the monoborylated product (H3CBpin) with 82.8% yield and >99% selectivity being achieved with 1255 turnovers. X-ray absorption and dynamic nuclear polarization-enhanced solid-state NMR spectroscopic studies identify the supported precatalyst as an IrI species, and indicate that upon completion of catalysis, multinuclear Ir polyhydrides are not formed. This is consistent with the hypothesis that immobilization of the organometallic Ir species on a surface prevents bimolecular decomposition pathways. Immobilization of the homogeneous IrI fragment onto amorphous silica represents a unique and simple strategy to improve the TON and longevity of a CH4 borylation catalyst.

Turn-on fluorescent capsule for selective fluoride detection and water purification.

It has been a long-standing challenge to develop organic molecular capsules for selective anion binding in water. Here, selective recognition of aqueous fluoride was achieved through triple protonation of a hemicryptophane (L), which is composed of a fluorescent cyclotriveratrylene (CTV) cap and tris(2-aminoethyl)amine (tren) as the anion binding site. Fluoride encapsulation by [3H-L]3+ was evidenced by 1H NMR, 19F NMR, LC-MS, and X-ray crystallography. In addition, [3H-L]3+ exhibited a 'turn-on' fluorescence signal (λ em = 324 nm) upon fluoride addition. An apparent association constant K A = (7.5 ± 0.4) × 104 M-1 and a detection limit of 570 nM fluoride were extracted from the fluorescence titration experiments in citrate buffer at pH 4.1. To the best of our knowledge, [3H-L]3+ is the first example of a metal-free molecular capsule that reports on fluoride binding in purely aqueous solutions with a fluorescence response. Finally, the protonated capsule was supported on silica gel, which enabled adsorptive removal of stoichiometric fluoride from water and highlights real-world applications of this organic host-guest chemistry.

Metalating 5-Methyl-2-[(2-nitrophenyl)amino]-3-thiophenecarbonitrile (ROY): Understanding the Denticity and Speciation of Complexes of the ROY Anion.

5-Methyl-2-[(2-nitrophenyl)amino]-3-thiophenecarbonitrile (ROY) is considered to be the most crystalline polymorphic organic molecule discovered to date with 12 fully characterized crystal structures present in the Cambridge Structural Database (CSD). However, metal complexes of ROY have not previously been described. Here, we explore the synthetic chemistry of ROY (denoted as H-ROY hereafter for the purpose of our study) and demonstrate that it can be deprotonated using either NaH or KH and that the resulting sodium and potassium salts of H-ROY can be cleanly isolated. Furthermore, we introduce two new metal complexes of the ROY anion (ROY-) with Co(II) and Ni(II) cations, formed by the reaction of the sodium salt of ROY, Na(ROY), with the respective transition-metal chloride salts. Solid-state X-ray diffraction studies confirm the presence of Co(II) or Ni(II) centers, with the ROY- ligand in a 1:2 ratio forming neutral trinuclear clusters of the forms [Co3ROY6] (Co-ROY) and [Ni3ROY6] (Ni-ROY) in both cases. Here, the ROY- moiety interacts with the metal center through the anionic N atom, an O atom of the -NO2 group, and the N atom of the -CN group. IR and electronic absorption spectroscopies reveal the influence of the Co(II) and Ni(II) centers on the properties of the complexes. Taken together, our results show that the metal complexes of the H-ROY proligand can be prepared with late 3d transition metals. The results of these structural chemistry studies may contribute to resolving polymorphism in H-ROY and related compounds.

Metal-Ligand Cooperativity to Assemble a Neutral and Terminal Niobium Phosphorus Triple Bond (Nb≡P).

Decarbonylation along with P-atom transfer from the phosphaethynolate anion, PCO- , to the NbIV complex [(PNP)NbCl2 (Nt BuAr)] (1) (PNP=N[2-Pi Pr2 -4-methylphenyl]2 - ; Ar=3,5-Me2 C6 H3 ) results in its coupling with one of the phosphine arms of the pincer ligand to produce a phosphanylidene phosphorane complex [(PNPP)NbCl(Nt BuAr)] (2). Reduction of 2 with CoCp*2 cleaves the P-P bond to form the first neutral and terminal phosphido complex of a group 5 transition metal, namely, [(PNP)Nb≡P(Nt BuAr)] (3). Theoretical studies have been used to understand both the coupling of the P-atom and the reductive cleavage of the P-P bond. Reaction of 3 with a two-electron oxidant such as ethylene sulfide results in a diamagnetic sulfido complex having a P-P coupled ligand, namely [(PNPP)Nb=S(Nt BuAr)] (4).

Ligand non-innocence allows isolation of a neutral and terminal niobium nitride.

Complex (PNP)NbCl2(N[tBu]Ar) (1) (PNP- = N[2-PiPr2-4-methylphenyl]2; Ar = 3,5-Me2C6H3) reacts with one equiv. of NaN3 to form a mixture of (PNPN)NbCl2(N[tBu]Ar) (2) and (PNP)NbN(N[tBu]Ar) (3), both of which have been spectroscopically and crystallographically characterized, including 15N isotopic labelling studies. Complex 3 represents the first structurally characterized example of a neutral and mononuclear Nb nitride. Independent studies established 3 to form via two-electron reduction of 2, whereas oxidation of 3 by two-electrons reversed the process. Computational studies suggest the transmetallation step to produce the intermediate [(PNP)NbCl(N3)(N[tBu]Ar)] (A) which extrudes N2 to form the phosphinimide [(PNPN)NbCl(N[tBu]Ar)] (B) followed by disproportionation to 2 and low-valent [(PNPN)Nb(N[tBu]Ar)] (C). The latter then undergoes intramolecular N-atom transfer to form the nitride moiety in 3.

Terminal and Super-Basic Parent Imides of Hafnium.

A dinuclear hafnium complex containing the parent imido ligand [(PN)(PNC)Hf=NH{µ2 -K}]2 (2) (PN- =(N-(2-Pi Pr2 -4-methylphenyl)-2,4,6-Me3 C6 H2 ; PNC2- =(N-(2-Pi Pr2 -4-methylphenyl)-2,4,6-CH2 Me2 C6 H2 ), was prepared by reduction of the bisazide trans-[(PN)2 Hf(N3 )2 ] (1) with two equiv of KC8 . Encapsulation of K+ in 2 with crown-ether or cryptand affords the first discrete salt [K(encap)][(PN)(PNC)Hf≡NH] (encap=18-crown-6(THF)2 , 3; 2,2,2-Kryptofix, 4), featuring a terminal parent imide and possessing some of the shortest Hf-N bond lengths known to date. DFT calculations revealed formation of 2 to proceed via an extremely basic monomeric nitrido, [(PN)2 Hf≡N]- (A), having a computed pKBH+ of ∼57 followed by heterolytic splitting of an inert 1,2-CH bond of a benzylic methyl group across the Hf≡N triple bond in A. An electronic structure analysis reveals A to possess a covalent Hf≡N triple bond and of super-basic character. We also showcase reactivity of the Hf≡NH bond with various electrophiles.

Tantalum, easy as Pi: understanding differences in metal-imido bonding towards improving Ta/Nb separations.

The separation and purification of niobium and tantalum, which co-occur in natural sources, is difficult due to their similar physical and chemical properties. The current industrial method for separating Ta/Nb mixtures uses an energy-intensive process with caustic and toxic conditions. It is of interest to develop alternative, fundamental methodologies for the purification of these technologically important metals that improve upon their environmental impact. Herein, we introduce new Ta/Nb imido compounds: M( t BuN)(TriNOx) (1-M) bound by the TriNOx3- ligand and demonstrate a fundamental, proof-of-concept Ta/Nb separation based on differences in the imido reactivities. Despite the nearly identical structures of 1-M, density functional theory (DFT)-computed electronic structures of 1-M indicate enhanced basic character of the imido group in 1-Ta as compared to 1-Nb. Accordingly, the rate of CO2 insertion into the M[double bond, length as m-dash]Nimido bond of 1-Ta to form a carbamate complex (2-Ta) was selective compared to the analogous, unobserved reaction with 1-Nb. Differences in solubility between the imido and carbamate complexes allowed for separation of the carbamate complex, and led to an efficient Ta/Nb separation (S Ta/Nb = 404 ± 150) dependent on the kinetic differences in nucleophilicities between the imido moieties in 1-Ta and 1-Nb.

The underappreciated influence of ancillary halide on metal-ligand proton tautomerism.

Syntheses of Vaska-type complexes [IrP2X(CO)] (P = phosphine, X = halide) with all four common halides (fluoride, chloride, bromide, and iodide) was attempted using a protic and hemilabile imidazolyl di-tert-butyl phosphine ligand. In the solid-state, all four complexes were found to be ionic with the halides in the outer-sphere, and the fourth coordination site of the square plane occupied by the imidazole arm of the ligand. In solution, however, the chloride complex was found to be in equilibrium with an octahedral IrIII-H species at room temperature. For the bromide and iodide analogs, the corresponding IrIII-H species were also observed but only after heating the solutions. The neutral IrI Vaska's analogs for X = Cl, Br, and I were obtained upon addition of excess halide salt, albeit heating was required for X = Br and I. The IrIII-H species are proposed to originate from tautomerization of minor amounts of the electron rich neutral Vaska analog (halide inner-sphere and phosphines monodentate) that are in equilibrium with the ionic species. Heating is required for the larger anions of bromide and iodide to overcome a kinetic barrier associated with their movement to an inner-sphere position prior to tautormerization. For the fluoride analog, the IrIII-H was not observed, attributable to strong hydrogen bonding interactions of the imidazolyl proton with the fluoride anion.

Metal-Ligand-Anion Cooperation in C-H Bond Formation at Platinum(II).

Thermolysis of [H(BPI)Pt(CH3)][OTf] (BPI = 1,3-bis(2-(4-tert-butyl)pyridylimino)isoindole) to release methane and form (BPI)Pt(OTf) is reported. Kinetic, mechanistic, and computational studies point to an unusual anion-assisted pathway that obviates the need for a higher oxidation state intermediate to couple the metal-bound methyl group with the ligand-bound hydrogen. Leveraging this insight, a triflimide derivative of the (BPI)Pt complex was shown to activate benzene, highlighting the role of the counteranion in controlling the activity of these complexes.

Ditelluride, Terminal Tellurido, and Bis(tellurido) Motifs of Titanium.

Highly modular and rational syntheses of titanium compounds containing ditelluride, terminal telluride, and bis(telluride) structural motifs are disclosed in this study. Titanate anions bearing two cis and terminal telluride functionalities bound to the same metal center represent a unique example of a group 4 transition metal bis(chalcogenide) ion and are accessed in a simple, single-step procedure from Ti(III) bis(alkyl) complexes in the presence of an outer-sphere reductant and at least 3 equiv of Te0 powder. These compounds have been characterized crystallographically and spectroscopically with some preliminary reactivity reported for the anionic Ti(═Te)2 motif. We also report solution 125Te NMR spectral data in addition to theoretical studies addressing the bonding and structure for these titanate bis(tellurido) systems.

C-C σ-Bond Oxidative Addition and Hydrofunctionalization by a Macrocycle-Supported Diiron Complex.

This report describes the first examples of unassisted C(sp)-C(sp2) and C(sp)-C(sp3) bond oxidative addition reactions to give thermodynamically favorable products. Treatment of a diiron complex supported by a geometrically and electronically flexible macrocyclic ligand, (3PDI2)Fe2(µ-N2)(PPh3)2 ([Fe2N2]0), with stoichiometric amounts of various 4,4'-disubstituted diphenylacetylenes (ArX-C≡C-ArX; X = OMe, H, F, CF3) yielded C(sp)-C(sp2) bond oxidative addition products. When Ph-C≡C-R substrates were used as substrates (R = Me, Et, iPr, tBu), products of either C(sp)-C(sp2) or C(sp)-C(sp3) bond activation were obtained, with the less sterically encumbering alkynes exclusively undergoing C(sp)-C(sp3) bond activation. Treatment of the C-C activation species with either H2 or HBpin was found to form products of C-C σ-bond hydrofunctionalization. In both the hydrogenation and hydroboration schemes, the diiron species was observed to return to [Fe2N2]0, thereby completing synthetic cycles for C-C σ-bond functionalization.

Tale of Three Molecular Nitrides: Mononuclear Vanadium (V) and (IV) Nitrides As Well As a Mixed-Valence Trivanadium Nitride Having a V3N4 Double-Diamond Core.

Transmetallation of [VCl3(THF)3] and [TlTptBu,Me] afforded [(TptBu,Me)VCl2] (1, TptBu,Me = hydro-tris(3-tert-butyl-5-methylpyrazol-1-yl)borate), which was reduced with KC8 to form a C3v symmetric VII complex, [(TptBu,Me)VCl] (2). Complex 1 has a high-spin (S = 1) ground state and displays rhombic high-frequency and -field electron paramagnetic resonance (HFEPR) spectra, while complex 2 has an S = 3/2 4A2 ground state observable by conventional EPR spectroscopy. Complex 1 reacts with NaN3 to form the VV nitride-azide complex [(TptBu,Me)V≡N(N3)] (3). A likely VIII azide intermediate en route to 3, [(TptBu,Me)VCl(N3)] (4), was isolated by reacting 1 with N3SiMe3. Complex 4 is thermally stable but reacts with NaN3 to form 3, implying a bis-azide intermediate, [(TptBu,Me)V(N3)2] (A), leading to 3. Reduction of 3 with KC8 furnishes a trinuclear and mixed-valent nitride, [{(TptBu,Me)V}2(µ4-VN4)] (5), conforming to a Robin-Day class I description. Complex 5 features a central vanadium ion supported only by bridging nitride ligands. Contrary to 1, complex 2 reacts with NaN3 to produce an azide-bridged dimer, [{(TptBu,Me)V}2(1,3-µ2-N3)2] (6), with two antiferromagnetically coupled high-spin VII ions. Complex 5 could be independently produced along with [(κ2-TptBu,Me)2V] upon photolysis of 6 in arene solvents. The putative {VIV≡N} intermediate, [(TptBu,Me)V≡N] (B), was intercepted by photolyzing 6 in a coordinating solvent, such as tetrahydrofuran (THF), yielding [(TptBu,Me)V≡N(THF)] (B-THF). In arene solvents, B-THF expels THF to afford 5 and [(κ2-TptBu,Me)2V]. A more stable adduct (B-OPPh3) was prepared by reacting B-THF with OPPh3. These adducts of B are the first neutral and mononuclear VIV nitride complexes to be isolated.