RESUMEN
In the present study, we perform a systematic examination of the products formed by mixing and heating of tungsten boride and iridium powders at different ratios in a broad temperature range using qualitative and quantitative X-ray analysis and time-of-flight neutron diffraction (TOF-ND), in combination with scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS) performed at different accelerating voltages. The well-known and unknown ternary W-Ir-B phases were detected. The Vickers microhardness value for the new ternary W2Ir5B2 boride was measured. Based on these findings, the ternary W2Ir5B2 boride can be considered hard.
RESUMEN
Optical transmission range and phase matching (PM) conditions for second harmonic generation (SHG) of Er3+:YSGG and CO2 laser in indium doped GaSe:In(0.1, 1.23, 2.32 mass%) are studied in comparison with these in pure and sulfur doped GaSe:S(0.09, 0.5, 2.2, 3 mass%) crystals. No changes in transparency curve are found in GaSe crystals up to 2.32 mass% indium content, but as small change as 0.18 degrees in PM angle for 2.79 microm Er3+:YSGG laser SHG and approximately 0.06 degrees for 9.58 microm CO2 laser emission line SHG are detected. PM properties of the crystals are evaluated as a function of temperature over the range from -165 to 230 degrees C. The value of dtheta/dT, the change in PM angle with variation of temperature, is found to be very small for GaSe:In crystals. While for SHG of Er3+:YSGG laser, dtheta/dT =22"/1 degrees C only, it is as small as -4.9"/1 degrees C for that of CO2 laser radiation. Linear variation of PM angle with temperature increasing is an indicator of absence of crystals structure transformation within temperature range from -165 to 230 degrees C. Thus, application of GaSe:In solid solutions in high average power nonlinear optical systems seems to be prospective.