Linear-Structure Single-Atom Gold(I) Catalyst for Dehydrogenative Coupling of Organosilanes with Alcohols.

A strategy for the synthesis of a gold-based single-atom catalyst (SAC) via a one-step room temperature reduction of Au(III) salt and stabilization of Au(I) ions on nitrile-functionalized graphene (cyanographene; G-CN) is described. The graphene-supported G(CN)-Au catalyst exhibits a unique linear structure of the Au(I) active sites promoting a multistep mode of action in dehydrogenative coupling of organosilanes with alcohols under mild reaction conditions as proven by advanced XPS, XAFS, XANES, and EPR techniques along with DFT calculations. The linear structure being perfectly accessible toward the reactant molecules and the cyanographene-induced charge transfer resulting in the exclusive Au(I) valence state contribute to the superior efficiency of the emerging two-dimensional SAC. The developed G(CN)-Au SAC, despite its low metal loading (ca. 0.6 wt %), appear to be the most efficient catalyst for Si-H bond activation with a turnover frequency of up to 139,494 h-1 and high selectivities, significantly overcoming all reported homogeneous gold catalysts. Moreover, it can be easily prepared in a multigram batch scale, is recyclable, and works well toward more than 40 organosilanes. This work opens the door for applications of SACs with a linear structure of the active site for advanced catalytic applications.

Preparation and characterization of the h-BN/Fe3O4/APTES-AMF/CuII nanocomposite as a new and efficient catalyst for the one-pot three-component synthesis of 2-amino-4-aryl(or heteroaryl)-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles.

The intriguing features of surface-engineered hexagonal two-dimensional boron nitride (h-BN) nanostructures have captivated the immense interest of researchers working in the arena of materials science. Inspired by striking attributes exhibited by h-BN nanosheets as the support material, we devoted our efforts towards synthesizing a novel magnetically retrievable h-BN/Fe3O4/APTES-AMF/CuII catalytic system, which was then comprehensively characterized using various techniques including SEM, TEM, EDX, SEM-based elemental mapping, ED-XRF, AAS, XRD, FT-IR, VSM, XPS, TGA, and BET. Further, the catalytic potential of h-BN/Fe3O4/APTES-AMF/CuII nanocomposites was investigated in the one-pot multicomponent coupling reaction to gain access to a library of biologically active 2-amino-4-aryl(or heteroaryl)-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles under ambient conditions. In addition, the use of green solvent, facile magnetic recoverability, and reusability of up to six successive runs made this protocol environmentally benign and economical. This work throws light on the development of covalently functionalized 2D-BN nanostructure-based copper catalysts and establishes its significance in furnishing industrially demanding products that would pave the way towards sustainable chemistry.

Developing Benign Ni/g-C3N4 Catalysts for CO2 Hydrogenation: Activity and Toxicity Study.

This research discusses the CO2 valorization via hydrogenation over the non-noble metal clusters of Ni and Cu supported on graphitic carbon nitride (g-C3N4). The Ni and Cu catalysts were characterized by conventional techniques including XRD, AFM, ATR, Raman imaging, and TPR and were tested via the hydrogenation of CO2 at 1 bar. The transition-metal-based catalyst designed with atom-economy principles presents stable activity and good conversions for the studied processes. At 1 bar, the rise in operating temperature during CO2 hydrogenation increases the CO2 conversion and the selectivity for CO and decreases the selectivity for methanol on Cu/CN catalysts. For the Ni/CN catalyst, the selectivity to light hydrocarbons, such as CH4, also increased with rising temperature. At 623 K, the conversion attained ca. 20%, with CH4 being the primary product of the reaction (CH4 yield >80%). Above 700 K, the Ni/CN activity increases, reaching almost equilibrium values, although the Ni loading in Ni/CN is lower by more than 90% compared to the reference NiREF catalyst. The presented data offer a better understanding of the effect of the transition metals' small metal cluster and their coordination and stabilization within g-C3N4, contributing to the rational hybrid catalyst design with a less-toxic impact on the environment and health. Bare g-C3N4 is shown as a good support candidate for atom-economy-designed catalysts for hydrogenation application. In addition, cytotoxicity to the keratinocyte human HaCaT cell line revealed that low concentrations of catalysts particles (to 6.25 µg mL-1) did not cause degenerative changes.

Intermetallic Copper-Based Electride Catalyst with High Activity for C-H Oxidation and Cycloaddition of CO2 into Epoxides.

Inorganic electrides have been proved to be efficient hosts for incorporating transition metals, which can effectively act as active sites giving an outstanding catalytic performance. Here, it is demonstrated that a reusable and recyclable (for more than 7 times) copper-based intermetallic electride catalyst (LaCu0.67 Si1.33 ), in which the Cu sites activated by anionic electrons with low-work function are uniformly dispersed in the lattice framework, shows vast potential for the selective C-H oxidation of industrially important hydrocarbons and cycloaddition of CO2 with epoxide. This leads to the production of value-added cyclic carbonates under mild reaction conditions. Importantly, the LaCu0.67 Si1.33 catalyst enables much higher turnover frequencies for the C-H oxidation (up to 25 276 h-1 ) and cycloaddition of CO2 into epoxide (up to 800 000 h-1 ), thus exceeding most nonnoble as well as noble metal catalysts. Density functional theory investigations have revealed that the LaCu0.67 Si1.33 catalyst is involved in the conversion of N-hydroxyphthalimide (NHPI) into the phthalimido-N-oxyl (PINO), which then triggers selective abstraction of an H atom from ethylbenzene for the generation of a radical susceptible to further oxygenation in the presence of O2 .

An Earth-abundant cobalt based photocatalyst: visible light induced direct (het)arene C-H arylation and CO2 capture.

In this work, we have reported a noble metal free heterogeneous photocatalyst to carry out direct (het)arene C-H arylation and solvent-free CO2 capture via single-electron transfer processes at room temperature and under pressure. The catalytic system comprises a cobalt(III) complex grafted over the silica coated magnetic support for the efficient recovery of the photocatalytic moiety without hampering its light-harvesting capability. The novel Earth-abundant cobalt(III) based photocatalyst possesses various fascinating properties such as high surface area to volume ratios, large pore volume, crystalline behaviour, high metal loading, excellent stability and reusability. The general efficacy of the highly abundant and low-cost cobalt based heterogeneous nanocatalyst was checked for the selective conversion of aryldiazonium salts into synthetically and pharmaceutically significant biaryl motifs under ambient conditions upon irradiation with visible light. The highly efficient photocatalytic conversion of carbon dioxide (CO2) to a value-added chemical was accomplished under mild reaction conditions with high selectivity, showing the added benefit of operational simplicity.

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications.

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications.

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Studies on individual pyrolysis and co-pyrolysis of corn cob and polyethylene: Thermal degradation behavior, possible synergism, kinetics, and thermodynamic analysis.

The knowledge on thermo-kinetics, synergistic effect, and reaction mechanism of pyrolysis/co-pyrolysis of biomass with plastics is crucial for designing efficient reactor system and subsequently the pyrolysis/co-pyrolysis process. The present work explores thermal response, kinetics, reaction mechanism and thermodynamic analysis of pyrolysis and co-pyrolysis of individual corn cob (CC) and polyethylene (PE), and their blend in the ratio of 3:1 (w/w). Thermogravimetric analysis (TGA) data was obtained under inert atmosphere at various heating rates of 10, 20, and 30 °C/min and synergistic effect in the co-pyrolysis of CC and PE is discussed. The obtained TGA data was processed using various model-free isoconversional methods like KAS, FWO, Friedman, Starink, and Vyazovkin for determination of kinetics of pyrolysis/co-pyrolysis process of CC and PE. Average activation energy for CC pyrolysis was estimated to be 240 ± 51.25 kJ/mol, 240 ± 51.51 kJ/mol, 237 ± 49.67 kJ/mol, and 245 ± 52.10 kJ/mol according to KAS, Starink, FWO, and Vyazovkin models, respectively. Statistical analysis showed that the variation in reported values of activation energy was not significantly different (p = 0.994). Similar statistically insignificant difference was also observed for pyrolysis of PE and co-pyrolysis of CC and PE. Results showed that co-pyrolysis (CC + PE) requires 10% less activation energy than pyrolysis of CC alone. For the co-pyrolysis process, the extent of synergistic effect was discussed by difference in mass loss (ΔW). Investigation also revealed that residue left for co-pyrolysis of CC and PE is 50% less than pyrolysis of CC alone showing synergistic effect during co-pyrolysis. Thermodynamic parameters were calculated to illustrate complex mechanism of the process. Third order reaction, 3D diffusion Jander, and Ginstling-Brounshtein (D4) models were found to be best fitted for CC pyrolysis, PE pyrolysis, and co-pyrolysis, respectively. Results obtained are expected to be useful in the design of corn cob and waste polyethylene co-pyrolysis systems.

Single Co-Atoms as Electrocatalysts for Efficient Hydrazine Oxidation Reaction.

Single-atom catalysts (SACs) have aroused great attention due to their high atom efficiency and unprecedented catalytic properties. A remaining challenge is to anchor the single atoms individually on support materials via strong interactions. Herein, single atom Co sites have been developed on functionalized graphene by taking advantage of the strong interaction between Co2+ ions and the nitrile group of cyanographene. The potential of the material, which is named G(CN)Co, as a SAC is demonstrated using the electrocatalytic hydrazine oxidation reaction (HzOR). The material exhibits excellent catalytic activity for HzOR, driving the reaction with low overpotential and high current density while remaining stable during long reaction times. Thus, this material can be a promising alternative to conventional noble metal-based catalysts that are currently widely used in HzOR-based fuel cells. Density functional theory calculations of the reaction mechanism over the material reveal that the Co(II) sites on G(CN)Co can efficiently interact with hydrazine molecules and promote the NH bond-dissociation steps involved in the HzOR.

Carbon Nitride-Based Ruthenium Single Atom Photocatalyst for CO2 Reduction to Methanol.

With increasing concerns for global warming, the solar-driven photocatalytic reduction of CO2 into chemical fuels like methanol is a propitious route to enrich energy supplies, with concomitant reduction of the abundant CO2  stockpiles. Herein, a novel single atom-confinement and a strategy are reported toward single ruthenium atoms dispersion over porous carbon nitride surface. Ruthenium single atom character is well confirmed by EXAFS absorption spectrometric analysis unveiling the cationic coordination environment for the single-atomic-site ruthenium center, that is formed by Ru-N/C intercalation in the first coordination shell, attaining synergism in N-Ru-N connection and interfacial carrier transfer. From time resolved fluorescence decay spectra, the average carrier lifetime of the RuSA-mC3 N4 system is found to be higher compared to m-C3 N4 ; the fact uncovering the crucial role of single Ru atoms in promoting photocatalytic reaction system. A high yield of methanol (1500 µmol g-1 cat. after 6 h of the reaction) using water as an electron donor and the reusability of the developed catalyst without any significant change in the efficiency represent the superior aspects for its potential application in real industrial technologies.

Single-Atom Catalysts: A Sustainable Pathway for the Advanced Catalytic Applications.

A heterogeneous catalyst is a backbone of modern sustainable green industries; and understanding the relationship between its structure and properties is the key for its advancement. Recently, many upscaling synthesis strategies for the development of a variety of respectable control atomically precise heterogeneous catalysts are reported and explored for various important applications in catalysis for energy and environmental remediation. Precise atomic-scale control of catalysts has allowed to significantly increase activity, selectivity, and in some cases stability. This approach has proved to be relevant in various energy and environmental related technologies such as fuel cell, chemical reactors for organic synthesis, and environmental remediation. Therefore, this review aims to critically analyze the recent progress on single-atom catalysts (SACs) application in oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and chemical and/or electrochemical organic transformations. Finally, opportunities that may open up in the future are summarized, along with suggesting new applications for possible exploitation of SACs.

Reusable Co-nanoparticles for general and selective N-alkylation of amines and ammonia with alcohols.

A general cobalt-catalyzed N-alkylation of amines with alcohols by borrowing hydrogen methodology to prepare different kinds of amines is reported. The optimal catalyst for this transformation is prepared by pyrolysis of a specific templated material, which is generated in situ by mixing cobalt salts, nitrogen ligands and colloidal silica, and subsequent removal of silica. Applying this novel Co-nanoparticle-based material, >100 primary, secondary, and tertiary amines including N-methylamines and selected drug molecules were conveniently prepared starting from inexpensive and easily accessible alcohols and amines or ammonia.

P- and F-co-doped Carbon Nitride Nanocatalysts for Photocatalytic CO2 Reduction and Thermocatalytic Furanics Synthesis from Sugars.

A new P- and F-co-doped amorphous carbon nitride (PFCN) has been synthesized via sol-gel-mediated thermal condensation of dicyandiamide. Such synthesized P- and F-co-doped carbon nitride displayed a well-defined mesoporous nanostructure and enhanced visible light absorption region up to infrared with higher BET surface area of 260.93 m2 g-1 ; the highest recorded value for phosphorus-doped carbon nitride materials. Moreover, the formation mechanism is delineated and the role of templates was found to be essential not only in increasing the surface area but also in facilitating the co-doping of P and F atoms. Co-doping helped to narrow the optical band gap to 1.8 eV, thus enabling an excellent photocatalytic activity for the aqueous reduction of carbon dioxide into methanol under visible-light irradiation, which is fifteen times higher (119.56 µmol g-1 h-1 ) than the bare carbon nitride. P doping introduced Brønsted acidity into the material, turning it into an acid-base bifunctional catalyst. Consequently, the material was also investigated for the thermal conversion of common carbohydrates into furanics.

Bio-waste chitosan-derived N-doped CNT-supported Ni nanoparticles for selective hydrogenation of nitroarenes.

In this study, a facile method for the synthesis of leach proof and earth-abundant non-noble Ni nanoparticles on N-doped carbon nanotubes is reported. The catalyst was synthesized by an impregnation-carbonization method, wherein a Ni-chitosan complex upon carbonization in a 5% H2/N2 atmosphere at 800 °C yielded Ni-containing N-doped CNTs. Chitosan served as a single source of carbon and nitrogen, and the nanotube growth was facilitated by the in situ formed Ni nanoparticles. The nanocatalyst was thoroughly characterized by several techniques; elemental mapping by SEM and TEM analysis confirmed the uniform distribution of Ni nanoparticles on the surface of N-doped CNTs with an average size in the range of 10-15 nm. The catalyst efficiently reduced a variety of nitroarenes (>99%) into their corresponding amines at a moderate pressure (5 bar) and a comparatively lower temperature (80 °C). Furthermore, the easy recovery of the catalyst using an external magnetic field along with high activity and easy recyclability makes the protocol eco-friendly.

Synthesis and Evaluation of Anticonvulsant Activity of Some Schiff Bases of 7-Amino-1,3-dihydro-2H-1,4-benzodiazepin-2-one.

A variety of 1,3-dihydro-2H-1,4-benzodiazepin-2-one azomethines and 1,3-dihydro-2H-1,4-benzodiazepin-2-one benzamide were prepared, characterized and evaluated for the anticonvulsant activity in the rat using picrotoxin-induced seizure model. The prepared 1,3-dihydro-2H-1,4-benzodiazepin-2-one azomethine derivatives emerged potentially anticonvulsant molecular scaffolds exemplified by compounds, 7-{(E)-[(4-nitrophenyl)methylidene]amino}-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one, 7-[(E)-{[4-(dimethylamino)phenyl]methylidene}amino]-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one, 7-{(E)-[(4-bromo-2,6-difluorophenyl)methylidene]amino}-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one and 7-[(E)-{[3-(4-fluorophenyl)-1-phenyl-1H-pyrazol-4-yl]methylidene}amino]-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one. All these four compounds have shown substantial decrease in the wet dog shake numbers and grade of convulsions with respect to the standard drug diazepam. The most active compound, 7-[(E)-{[4-(dimethylamino)phenyl]methylidene}amino]-5-phenyl-1,3-dihydro-2H-1,4-benzodiazepin-2-one, exhibited 74 % protection against convulsion which was higher than the standard drug diazepam. Furthermore, to identify the binding mode of the interaction amongst the target analogs and binding site of the benzodiazepine receptor, molecular docking study and molecular dynamic simulation were carried out. Additionally, in silico pharmacokinetic and toxicity predictions of target compounds were carried out using AdmetSAR tool. Results of ADMET studies suggest that the pharmacokinetic parameters of all the target compounds were within the acceptable range to become a potential drug candidate as antiepileptic agents.

Sustainable Synthesis of Nanoscale Zerovalent Iron Particles for Environmental Remediation.

Nanoscale zerovalent iron (nZVI) particles represent an important material for diverse environmental applications because of their exceptional electron-donating properties, which can be exploited for applications such as reduction, catalysis, adsorption, and degradation of a broad range of pollutants. The synthesis and assembly of nZVI by using biological and natural sustainable resources is an attractive option for alleviating environmental contamination worldwide. In this Review, various green synthesis pathways for generating nZVI particles are summarized and compared with conventional chemical and physical methods. In addition to describing the latest environmentally benign methods for the synthesis of nZVI, their properties and interactions with diverse biomolecules are discussed, especially in the context of environmental remediation and catalysis. Future prospects in the field are also considered.

Rapid and Scalable Wire-bar Strategy for Coating of TiO2 Thin-films: Effect of Post-Annealing Temperatures on Structures and Catalytic Dye-Degradation.

Titanium dioxide (TiO2) thin films were rapidly coated on Corning glass substrates from the precursor solution using the wire-bar technique at the room temperature and then post-annealed at 400, 500 and 600 °C for 1 h under atmospheric conditions. The structural, morphological, optical, wettability and photocatalytic properties of the films were studied. X-ray diffraction analysis confirmed the formation of an anatase TiO2 structure irrespective of the post-annealing temperatures. The optical transparency of the films in the visible range was measured to be > 70%. A water contact angle (WCA) of ~0° was observed for TiO2 thin-film, post-annealed at 400 °C and 500 °C. However, WCA of 40.3° was observed for post-annealed at 600 °C. The photocatalytic dye-degradation using post-annealed thin-film was investigated indicating a steady improvement in the dye-degradation percentage (from 24.3 to 29.4%) with the increase of post-annealing temperature. The demonstrated TiO2 thin-films deposited by wire-bar coating technique showed promises for the manufacturing of large-area cost-effective self-cleaning window glass.