Light-induced tumor theranostics based on chemical-exfoliated borophene.

Among 2D materials (Xenes) which are at the forefront of research activities, borophene, is an exciting new entry due to its uniquely varied optical, electronic, and chemical properties in many polymorphic forms with widely varying band gaps including the lightest 2D metallic phase. In this paper, we used a simple selective chemical etching to prepare borophene with a strong near IR light-induced photothermal effect. The photothermal efficiency is similar to plasmonic Au nanoparticles, with the added benefit of borophene being degradable due to electron deficiency of boron. We introduce this selective chemical etching process to obtain ultrathin and large borophene nanosheets (thickness of ~4 nm and lateral size up to ~600 nm) from the precursor of AlB2. We also report first-time observation of a selective Acid etching behavior showing HCl etching of Al to form a residual B lattice, while HF selectively etches B to yield an Al lattice. We demonstrate that through surface modification with polydopamine (PDA), a biocompatible smart delivery nanoplatform of B@PDA can respond to a tumor environment, exhibiting an enhanced cellular uptake efficiency. We demonstrate that borophene can be more suitable for safe photothermal theranostic of thick tumor using deep penetrating near IR light compared to gold nanoparticles which are not degradable, thus posing long-term toxicity concerns. With about 40 kinds of borides, we hope that our work will open door to more discoveries of this top-down selective etching approach for generating borophene structures with rich unexplored thermal, electronic, and optical properties for many other technological applications.

Chemistry, Functionalization, and Applications of Recent Monoelemental Two-Dimensional Materials and Their Heterostructures.

The past decades have witnessed a rapid expansion in investigations of two-dimensional (2D) monoelemental materials (Xenes), which are promising materials in various fields, including applications in optoelectronic devices, biomedicine, catalysis, and energy storage. Apart from graphene and phosphorene, recently emerging 2D Xenes, specifically graphdiyne, borophene, arsenene, antimonene, bismuthene, and tellurene, have attracted considerable interest due to their unique optical, electrical, and catalytic properties, endowing them a broader range of intriguing applications. In this review, the structures and properties of these emerging Xenes are summarized based on theoretical and experimental results. The synthetic approaches for their fabrication, mainly bottom-up and top-down, are presented. Surface modification strategies are also shown. The wide applications of these emerging Xenes in nonlinear optical devices, optoelectronics, catalysis, biomedicine, and energy application are further discussed. Finally, this review concludes with an assessment of the current status, a description of existing scientific and application challenges, and a discussion of possible directions to advance this fertile field.

Optical pulse modulators based on layered vanadium diselenide nanosheets.

The transition metal disulfides of VB group elements have gradually come into people's field of vision owing to their two-dimensional structure and unique optical properties. Vanadium diselenide (VSe2) as a kind of transition metal diselenides, is competent for the applications of nonlinear saturable absorption. The dispersion of few-layer VSe2is prepared by liquid phase exfoliation method. Clearly, it has an obvious layered structure, and the interlayer spacing is 0.31 nm. The VSe2nanosheets are inserted into the Erbium-doped fiber laser through tapered deposition method and the measured modulation depth is 1.46%. A 1530.5 nm centered 851-fs pulse is observed with the 3.2 nm 3-dB spectral width. The experimental results show that the pulse is persistent under the power of 334 mW, with signal-to-noise ratio of 41 dB. And an up to 552.4 MHz modulation phenomenon is observed around 1560 nm, so is its frequency tunability. This is the first time that VSe2is used to realize high frequency modulation in fiber laser. It is proved that VSe2is expected to be a budding material of ultrafast optical modulation devices and widely used in the field of ultrafast photonics.

Overcoming barriers in photodynamic therapy harnessing nano-formulation strategies.

Photodynamic therapy (PDT) has been extensively investigated for decades for tumor treatment because of its non-invasiveness, spatiotemporal selectivity, lower side-effects, and immune activation ability. It can be a promising treatment modality in several medical fields, including oncology, immunology, urology, dermatology, ophthalmology, cardiology, pneumology, and dentistry. Nevertheless, the clinical application of PDT is largely restricted by the drawbacks of traditional photosensitizers, limited tissue penetrability of light, inefficient induction of tumor cell death, tumor resistance to the therapy, and the severe pain induced by the therapy. Recently, various photosensitizer formulations and therapy strategies have been developed to overcome these barriers. Significantly, the introduction of nanomaterials in PDT, as carriers or photosensitizers, may overcome the drawbacks of traditional photosensitizers. Based on this, nanocomposites excited by various light sources are applied in the PDT of deep-seated tumors. Modulation of cell death pathways with co-delivered reagents promotes PDT induced tumor cell death. Relief of tumor resistance to PDT with combined therapy strategies further promotes tumor inhibition. Also, the optimization of photosensitizer formulations and therapy procedures reduces pain in PDT. Here, a systematic summary of recent advances in the fabrication of photosensitizers and the design of therapy strategies to overcome barriers in PDT is presented. Several aspects important for the clinical application of PDT in cancer treatment are also discussed.

Defect Engineering in Ultrathin SnSe Nanosheets for High-Performance Optoelectronic Applications.

Ultrathin lamellar SnSe is highly attractive for applications in areas such as photonics, photodetectors, photovoltaic devices, and photocatalysis, owing to its suitable band gap, exceptional light absorption capabilities, and considerable carrier mobility. On the other hand, SnSe nanosheets (NSs) still face challenges of being difficult to prepare and their devices having low photoelectric conversion efficiencies. Herein, ultrathin SnSe NSs with controlled Se defects were synthesized with high yield by a facial Li intercalation-assisted liquid exfoliation method. The loss of Se, a narrowing of the band gap, and an increase in lattice disorders involving vacancies, distortions, and phase transition were observed in SnSe NSs prepared with a long lithiation process. Comparing between the 24 and 72 h lithiation samples, the ones processed for a longer time displayed a faster recombination time due to more defect-induced mid-states. Inspiringly, enhancements of 4-10 times were observed for photodetector device parameters such as photocurrent, photoresponsivity, photoresponse speed, and specific detectivity of the 72 h lithiation SnSe NSs. Additionally, these devices show good stability and a broad detection range, from ultraviolet to the near infrared region. Our results provide a promising avenue for the mass production of SnSe NSs with high photoelectric performance and open up opportunities for applications in photonics, optoelectronics, and photocatalysis.

Nonlinear Photonics Using Low-Dimensional Metal-Halide Perovskites: Recent Advances and Future Challenges.

Low-dimensional metal-halide perovskites have exhibited significantly superior nonlinear optical properties compared to traditional semiconductor counterparts, thanks to their peculiar physical and electronic structures. Their exceptional nonlinear optical characteristics make them excellent candidates for revolutionizing widespread applications. However, the research of nonlinear photonics based on low-dimensional metal-halide perovskites is in its infancy. There is a lack of comprehensive and in-depth summary of this research realm. Here, the state-of-the-art research progress related to third-and higher-order nonlinear optical properties of low-dimensional metal-halide perovskites with diverse crystal structures from 3D down to 0D, together with their practical applications, is summarized comprehensively. Critical discussions are offered on the fundamental mechanisms beneath their exceptional nonlinear optical performance from the physics viewpoint, attempting to disclose the role of intrinsic attributes (e.g., composition, bandgap, size, shape, and structure) and external modulation strategies (e.g., developing core-shell structures, transition metal ion doping, and hybridization with dielectric microspheres) in tuning the response. Additionally, their potential applications in nonlinear photonics, nonlinear optoelectronics, and biophotonics are systematically and thoroughly summed up and categorized. Lastly, insights into the current technical challenges and future research opportunities of nonlinear photonics based on low-dimensional metal-halide perovskites are provided.

Broadband Nonlinear Photonics in Few-Layer Borophene.

In this paper, 2D borophene is synthesized through a liquid-phase exfoliation. The morphology and structure of as-prepared borophene are systemically analyzed, and the Z-scan is used to measure the nonlinear optical properties. It is found that the saturable absorber (SA) properties of borophene make it serve as an excellent broadband optical switch, which is strongly used for mode-locking in near- and mid-infrared laser systems. Ultrastable pulses with durations as short as 792 and 693 fs are successfully delivered at the central wavelengths of 1063 and 1560 nm, respectively. Furthermore, stable pulses at a wavelength of 1878 nm are demonstrated from a thulium mode-locked fiber laser based on the same borophene SA. This research reveals a significant potential for borophene used in lasers helping extending the frontiers of photonic technologies.

Watt-level ultrafast bulk laser with a graphdiyne saturable absorber mirror.

Few-layered graphdiyne (GDY) was successfully fabricated and applied as a saturable absorber to generate a watt-level ultrafast solid-state bulk laser. The maximum output power of up to 1.27 W was obtained with a pulse width of 23 ps and a repetition rate of 92.9 MHz, using Nd:YVO4 crystal as a gain medium. To the best of our knowledge, this is the first application of GDY as a mode locker in all-solid-state bulk lasers. These results indicate the promising potential of GDY for producing high-power ultrafast lasers.

Recent advances in real-time spectrum measurement of soliton dynamics by dispersive Fourier transformation.

Mode-locking lasers have not only produced huge economic benefits in industrial fields and scientific research, but also provided an excellent platform to study diverse soliton phenomena. However, the real-time characterization of the ultrafast soliton dynamics remains challenging for traditional electronic instruments due to their relatively low response bandwidth and slow scan rate. Consequently, it is urgent for researchers to directly observe these ultrafast evolution processes, rather than just indirectly understand them from numerical simulations or averaged measurement data. Fortunately, dispersive Fourier transformation (DFT) provides a powerful real-time measurement technique to overcome the speed limitations of traditional electronic measurement devices by mapping the frequency spectrum onto the temporal waveform. In this review, the operation principle of DFT is discussed and the recent progress in characterizing the ultrafast transient soliton dynamics of mode-locking lasers is summarized, including soliton explosions, soliton molecules, noise-like pulses, rogue waves, and mode-locking buildup processes.

Graphdiyne Saturable Absorber for Passively Q-Switched Ho3+-Doped Laser.

High-quality all-carbon nanostructure graphdiyne (GDY) saturable absorber was successfully fabricated and saturable absorption properties in the 2 µm region were characterized using a commercial mode-locked laser as a pulsed source. The fabricated GDY was first used as an optical switcher in a passively Q-switched Ho laser. Under absorbed pump power of 2.4 W, the maximum average output power and shortest pulse width were 443 mW and 1.38 µs, at a repetition rate of 29.72 kHz. The results suggest that GDY nanomaterial is a promising candidate as an optical modulator for generation of short pulses in Ho-doped lasers at 2.1 µm.

Two-Dimensional Black Arsenic Phosphorus for Ultrafast Photonics in Near- and Mid-Infrared Regimes.

Black arsenic phosphorus (b-AsP), as one kind of novel two-dimensional (2D) materials, bridges the band gap between black phosphorus and graphene. Thanks to its great advantages, including high carrier mobility, excellent in-plane anisotropy, and broad tunability band gap, b-AsP has aroused great interest in fields of photonics and photoelectronics. In this paper, ultrathin 2D b-AsP nanomaterials were fabricated by the liquid-phase exfoliation method, and their strong broadband linear and nonlinear absorptions were characterized by ultraviolet-visible-infrared and Z-scan technology. The experimental determination of the nonlinear absorption coefficient and low saturation intensity of b-AsP were -0.23 cm/GW and 3.336 GW/cm2, respectively. Based on density functional theory, the partial charge density and band structure at the conduction band minimum and valence band maximum were calculated, which further proves the excellent optical properties of 2D b-AsP. By first using 2D b-AsP as a novel saturable absorber in both erbium-doped and thulium-doped fiber lasers, mode-locked soliton pulses can stably operate at 1.5 and 2 µm. The laser pulses generated by 2D b-AsP possess higher stability to resist self-splitting than those generated by other 2D material-based mode-lockers. These experimental results highlight that 2D b-AsP has great application potential as a novel optical material in ultrafast photonics from near- to mid-infrared regimes.

Recent Advances of Spatial Self-Phase Modulation in 2D Materials and Passive Photonic Device Applications.

Optical nonlinearity in 2D materials excited by spatial Gaussian laser beam is a novel and peculiar optical phenomenon, which exhibits many novel and interesting applications in optical nonlinear devices. Passive photonic devices, such as optical switches, optical logical gates, photonic diodes, and optical modulators, are the key compositions in the future all-optical signal-processing technologies. Passive photonic devices using 2D materials to achieve the device functionality have attracted widespread concern in the past decade. In this Review, an overview of the spatial self-phase modulation (SSPM) in 2D materials is summarized, including the operating mechanism, optical parameter measurement, and tuning for 2D materials, and applications in photonic devices. Moreover, some current challenges are also proposed to solve, and some possible applications of SSPM method are predicted for the future. Therefore, it is anticipated that this summary can contribute to the application of 2D material-based spatial effect in all-optical signal-processing technologies.

Emerging combination strategies with phototherapy in cancer nanomedicine.

Optical techniques using developed laser and optical devices have made a profound impact on modern medicine, with "biomedical optics" becoming an emerging field. Sophisticated technologies have been developed in cancer nanomedicine, such as photothermal therapy and photodynamic therapy, among others. However, single-mode phototherapy cannot completely treat persistent tumors, with the challenges of relapse or metastasis remaining; therefore, combinatorial strategies are being developed. In this review, the role of light in cancer therapy and the challenges of phototherapy are discussed. The development of combinatorial strategies with other therapeutic methods, including chemotherapy, immunotherapy, gene therapy, and radiotherapy, is presented and future directions are further discussed. This review aims to highlight the significance of light in cancer therapy and discuss the combinatorial strategies that show promise in addressing the challenges of phototherapy.

Ultrathin boron nanosheets as an emerging two-dimensional photoluminescence material for bioimaging.

Two-dimensional (2D) metal-free sheets with atomic thickness have been highly considered as promising candidates for fluorescent probes, due to their intriguing characteristics. In this work, 2D ultrathin boron nanosheets (B NSs) with a surface defect nanolayer can be effectively prepared by modified liquid phase exfoliation. The as-prepared ultrathin B NSs show blue fluorescence characteristics even with a quantum yield efficiency of up to 10.6%. Such luminescent behavior originates from the quantum confinement effect and the existence of a surface defect layer. In light of the advantages of being environmentally friendly, having high photostability and good biocompatibility, for the first time we have shown that ultrathin B NSs can be used as an emerging fluorescent probe for application in cellular bioimaging. It is believed that this work will open new avenues for ultrathin B NSs in biomedical fields, and it will also inspire the development of other elemental 2D nanomaterials.

Interface engineering of two-dimensional transition metal dichalcogenides towards next-generation electronic devices: recent advances and challenges.

Over the past decade, two-dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted tremendous research interest for future electronics owing to their atomically thin thickness, compelling properties and various potential applications. However, interface engineering including contact optimization and channel modulations for 2D TMDCs represents fundamental challenges in ultimate performance of ultrathin electronics. This article provides a comprehensive overview of the basic understanding of contacts and channel engineering of 2D TMDCs and emerging electronics benefiting from these varying approaches. In particular, we elucidate multifarious contact engineering approaches such as edge contact, phase engineering and metal transfer to suppress the Fermi level pinning effect at the metal/TMDC interface, various channel treatment avenues such as van der Waals heterostructures, surface charge transfer doping to modulate the device properties, and as well the novel electronics constructed by interface engineering such as diodes, circuits and memories. Finally, we conclude this review by addressing the current challenges facing 2D TMDCs towards next-generation electronics and offering our insights into future directions of this field.

Sub-hundred nanosecond pulse generation from a black phosphorus Q-switched Er-doped fiber laser.

Black phosphorus (BP), a prosperous two-dimensional optoelectronic material, has been deeply developed for various optoelectronics applications. Here, we demonstrate a sub-hundred nanosecond passively Q-switched Er-doped all-fiber laser with BP as the saturable absorber (SA). The BP-SA is fabricated by a controllable optical deposition technique. To achieve the sub-hundred nanosecond Q-switching output, we deliberately enlarge the modulation depth of the BP-SA by suitably increasing the time and laser power of the optical deposition and shortening the laser cavity length with an integrated multifunctional component. A stable Q-switched pulse train was obtained with a pulse duration as narrow as 91 ns, and the Q-switched lasing characteristics based on the BP-SA have also been investigated and discussed. The experimental results indicate that the BP material can be employed as an effective SA for the nanosecond pulse generation.

A self-powered photodetector based on two-dimensional boron nanosheets.

Owing to their intriguing characteristics, the ongoing pursuit of emerging mono-elemental two-dimensional (2D) nanosheets beyond graphene is an exciting research area for next-generation applications. Herein, we demonstrate that highly crystalline 2D boron (B) nanosheets can be efficiently synthesized by employing a modified liquid phase exfoliation method. Moreover, carrier dynamics has been systematically investigated by using femtosecond time-resolved transient absorption spectroscopy, demonstrating an ultrafast recovery speed during carrier transfer. Based on these results, the optoelectronic performance of the as-synthesized 2D B nanosheets has been investigated by applying them in photoelectrochemical (PEC)-type and field effect transistor (FET)-type photodetectors. The experimental results revealed that the as-fabricated PEC device not only exhibited a favourable self-powered capability, but also a high photoresponsivity of 2.9-91.7 µA W-1 in the UV region. Besides, the FET device also exhibited a tunable photoresponsivity in the range of 174-281.3 µA W-1 under the irradiation of excited light at 405 nm. We strongly believe that the current work shall pave the path for successful utilization of 2D B nanosheets in electronic and optoelectronic devices. Moreover, the proposed method can be utilized to explore other mono-elemental 2D nanomaterials.

Synthesis and optoelectronics of mixed-dimensional Bi/Te binary heterostructures.

Mixed-dimensional binary heterostructures, especially 0D/2D heterostructures, have attracted significant attention due to their unique physical properties. In this contribution, 0D bismuth quantum dots (Bi QDs, VA) are immobilized onto 2D Te nanosheets (Te NSs, VIA) to prepare Bi QDs/Te NSs binary heterostructures (Bi/Te) through a facile and cost-effective hydrothermal method. The results from both experiments and density functional theory (DFT) calculations demonstrate the enhanced photo-response behaviors of Bi/Te-based photoelectrochemical (PEC)-type photodetectors (PDs). The as-prepared PDs exhibit a high photocurrent of 18.21 µA cm-2, significantly higher than those of previously reported pristine Bi QD and Te NS-based PDs. The PDs are further demonstrated to have excellent self-power capability and long-term stability over 30 days. Additionally, the obtained 786 fs pulse output signal in the telecommunications band reveals the great potential of Bi/Te for ultrafast photonic devices. It is believed that such VA/VIA binary heterostructures provide opportunities for developing multifunctional optoelectronic devices for nano-science applications.

Few-layer hexagonal bismuth telluride (Bi2Te3) nanoplates with high-performance UV-Vis photodetection.

It is widely known that the excellent intrinsic electronic and optoelectronic advantages of bismuthene and tellurene make them attractive for applications in transistors and logic and optoelectronic devices. However, their poor optoelectronic performances, such as photocurrent density and photoresponsivity, under ambient conditions severely hinder their practical application. To satisfy the demand of high-performance optoelectronic devices and topological insulators, bismuth telluride nanoplates (Bi2Te3 NPs) with different sizes, successfully synthesized by a solvothermal approach have been, for the first time, employed to fabricate a working electrode for photoelectrochemical (PEC)-type photodetection. It is demonstrated that the as-prepared Bi2Te3 NP-based photodetectors exhibit remarkably improved photocurrent density, enhanced photoresponsivity, and faster response time and recovery time in the UV-Vis region, compared to bismuthene and tellurene-based photodetectors. Additionally, the PEC stability measurements show that Bi2Te3 NPs have a comparable long-term stability for on/off switching behaviour for the bismuthene and tellurene-based photodetectors. Therefore, it is anticipated that the present work can provide fundamental acknowledgement of the optoelectronic performance of a PEC-type Bi2Te3 NP-based photodetector, shedding light on new designs of high-performance topological insulator-based optoelectronic devices.

A self-encapsulated broadband phototransistor based on a hybrid of graphene and black phosphorus nanosheets.

A phototransistor based on a hybrid of graphene and BP nanosheets with a facile fabrication method and remarkable performance is presented. Unlike previously reported single BP flake-based devices, this phototransistor employs diverse BP nanosheets with different sizes and layer numbers. The wet transfer process of graphene is exploited to integrate the liquid-exfoliated BP nanosheets into the device smoothly. Due to the diversity of BP nanosheets, the device demonstrates a broadband photo-response in the spectrum from 360 nm to 785 nm. The photo-response mechanism is revealed to be the photogating effect caused by the discrete BP nanosheets adsorbed on graphene. The phototransistor has a responsivity of 7.7 × 103 A W-1 in the near-UV region with a wide conductive channel of 200 µm. Moreover, the simplified wet transfer process of graphene leaves a self-encapsulated layer of PMMA on the as-prepared device, inducing a good atmospheric stability in the device. This report provides a valid, implantable, and facile strategy to apply BP nanosheets in a broadband, high-performing and air-stable photodetector.